Synthesis,micellization properties,and cytotoxicity trends of N-hydroxyethyl-3-alkyloxypyridinium surfactants

N-hydroxyethyl-3-alkyloxypyridinium amphiphiles have been synthesized and characterized by various spectroscopic techniques. Self-assembling properties of these amphiphiles have been studied by surface tension, conductivity, and fluorescence measurements. Basic micellization parameters like critical micelle concentration (cmc), surface tension at the cmc (γ _cmc), adsorption efficiency (pC₂₀), effectiveness of surface tension reduction (Π _cmc), maximum surface excess concentration (Γ _max) and minimum surface area/molecule (A _min), and Gibbs free energy of the micellization (ΔG⁰ _mic) have also been determined. The micellization of these 3-alkyloxypyridinium halides in aqueous phase have been found to be exothermic and entropy-driven as assessed by conductivity measurements at different temperatures. Thermal degradation of these surfactants has also been assessed by thermal gravimetric analysis under nitrogen atmosphere. Further, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay of these surfactants on C6 glioma cells show them to be less toxic than conventional cationic surfactants.     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Synthesis and Evaluation of Surface Activity of Gemini Borate Surfactants Based on Glucose Moiety

A series of Gemini borate surfactants were synthesized based on glucose molecule. Their chemical structures were confirmed using ¹H-NMR,¹³C nuclear magnetic resonance (NMR), and mass spectroscopy. The surface activities of these Gemini amphiphiles were measured, including surface tension (γ), critical micelle concentration (CMC), effectiveness (II_cmc), efficiency (pC₂₀), maximum surface excess (Γ_max), and minimum surface area (A_min) at different temperatures 25, 35, and 45°C either in pure water or in water–ethanol mixture (10%). Also, thermodynamic data including free energy, entropy, and enthalpy changes (ΔS, TΔS, ΔH) for adsorption at the air–water interface and also for micellization in surfactant solutions were calculated.     

Characterization of Surfactant-Diblock Copolymer Interactions and Its Thermodynamic Studies

The interaction of nonionic diblock copolymer poly(ethylene oxide butylene oxide) (E₆₂B₂₂) with a cationic surfactant cetyl trimethyl ammonium bromide (CTAB) and anionic surfactant sodium dodecyl sulphate (SDS) were studied using surface tension, conductivity, and dynamic laser light scattering techniques. Surface tension measurements were used to determine critical micelle concentration and thereby its free energy of adsorption (ΔG_ads), free energy of micellization (ΔG_m), surface excess concentration (Γ), and minimum area per molecule (A). Conductivity measurements were used to determine critical micelle concentration (CMC) critical aggregation concentration (CAC) at different temperatures, enthalpy of micellization (ΔH_m), free energy of micellization and entropy of micellization (ΔS_m). Changes in physicochemical properties of the micellized block copolymer were studied by using dynamic laser light scattering. The effect of surfactant on the size and properties of block copolymer has also been discussed.     

Synthesis,surface activity,and corrosion inhibition of dentritic quaternary ammonium salt-type tetrameric surfactants

The dentritic quaternary ammonium salt-type tetrameric surfactant (4C₁₂tetraQ) was synthesized, and the molecular structure was confirmed by ¹H NMR and FTIR. The surface activity of 4C₁₂tetraQ was investigated by surface tension, and surface chemical parameters, such as critical micelle concentration (cmc), efficiency (pC₂₀), effectiveness (π_cmc), the surface tension value at cmc (γ_cmc), minimum surface area (A_min), maximum surface excess (Γ_max), and cmc/C₂₀ were obtained from the measurement results. The results show that the 4C₁₂tetraQ surfactant has higher surface activity than the traditional monomeric surfactants (dodecyl trimethyl ammonium bromide, DTAB). The Krafft points were taken as <0°C, indicating that the synthesized tetrameric surfactants had good water solubility. Free energies of micellization and adsorption show that 4C₁₂tetraQ display greater propensity to absorb at the interface than form micelle in the bulk of the aqueous solution, and that the two processes are spontaneous. The measurement results show that 4C₁₂tetraQ has good emulsification power and foam performance. The corrosion efficiency was evaluated with the loss weight method in 1?mol/L HCl solution, and the results show that the 4C₁₂tetraQ surfactant has good corrosion inhibition, and can be considered as a corrosion inhibitor.     

Surface activity and thermodynamic properties of water‐soluble polyester surfactants based on 1,3‐dicarboxymethoxybenzene used for enhanced oil recovery

The surface activity and thermodynamic properties for eight low molecular weight nonionic co‐polyester (PE) surfactants have been investigated. Surface and interfacial tensions (IFT) of surfactants in aqueous solutions were measured using the spinning drop technique. From these measurements, the critical micelle concentration (CMC), the surface pressure at CMC (Y_CMC), the maximum surface concentration (Γ_max), the minimum area/molecule at the aqueous solution/air interface (A_min), the effectiveness of surface tension reduction (Π_CMC), the alkane carbon number (n_min) and the IFT at n_min (Y_min) were determined. The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic and ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad and ΔS_ad) for these polymeric surfactants were also calculated. Structural effects on micellization and adsorption are discussed in terms of these parameters. The results show that the ΔG_ad values were more negative than ΔG_mic values for these compounds, so that they favored adsorption before the micellization process. They exhibited IFT in the order of 10⁻³ to 10⁻⁴ mN/m against the thin alkane carbon number range 6–9. This range seemed to be prefered for enhanced oil recovery. Copyright © 2000 John Wiley & Sons, Ltd.     

Synthesis and Properties of Novel Cationic Triazolium Gemini Surfactants

New type of triazolium Gemini surfactants were synthesized by reaction of epichlorohydrine with long-chain fatty alcohols namely cetyl alcohol and oleyl alcohol furnishing product 2-(alkoxymethyl)oxirane followed by the their subsequent treatment with triazole resulting in the formation of 1-(1,2,4-triazole)-3-alokoxypropane-2-ol which on reaction with 1,6-dibromohexane resulted in the formation of triazolium-based cationic Gemini surfactant. Their formation was confirmed by IR spectroscopy. Surface tension values were used to determine the critical micelle concentration (CMC), minimum area per molecule (A_min) at air?water interface, Gibbs free energy of adsorption (ΔG_ads), the maximum surface excess concentration (Γ_max), and other parameters. The inhibition behavior of dimeric surfactant on the corrosion of carbon steel (CS) in 1 N H₂SO₄ aqueous medium was studied at 30°C. Performance tests like dispersion capability, foaming power and stability, emulsifying power, and wetting ability were determined. The obtained results show that dispersion capability, foaming power, foaming stability, and emulsifying ability are very good. The wetting power of synthesized surfactants is quite better.     

Adsorption and aggregation properties of novel star-shaped gluconamide-type cationic surfactants in aqueous solution

The adsorption and aggregation behavior of novel star-shaped gluconamide-type cationic surfactants N-dodecyl-N,N-bis[(3-D-gluconylamido)propyl]-N-alkylammonium bromide (C_nDBGB, where n represents hydrocarbon chain lengths of 10, 12, and 14) has been studied on the basis of static/dynamic surface tension, conductivity, dynamic light scattering (DLS), and transmission electron microscopy (TEM) data. The static surface tension of the C_nDBGB aqueous solution measured at the critical micelle concentration (CMC) is observed to be significantly lower than that of the corresponding monomeric surfactants. The dynamic surface tension results indicate that adsorption process of above CMC is a mixed diffusion–kinetic adsorption mechanism. From the results of temperature dependent conductivity measurements, we could obtain the degree of counterion binding (β) and the thermodynamic parameters such as standard free energy (ΔG _mic ⁰ ), enthalpy (ΔH _mic ⁰ ), and entropy (ΔS _mic ⁰ ) of aggregation. With a combination of the DLS and TEM data, a size transformation of the micelles is suggested to occur with an increase in the concentration.     

Synthesis and Surface Properties of Novel N-Alkyl Quinoline-Based Cationic Gemini Surfactants

Two series of cationic dimeric (gemini) surfactants are prepared with respect to key surfactants properties, such as surface activity and solubilization. The influence of both the dimerization and the spacer group is examined in order to establish structure-property relationships. The surface tension and critical micelle concentration can be markedly reduced compared to the monomeric surfactants in the pure state. The critical micelle concentration (cmc) of each series has been determined using equilibrium surface tension measurements. Furthermore, air/water interface parameters including effectiveness (π_cmc), efficiency (P_C20), maximum surface excess (Γ _max ), and minimum surface area (A _min ) have been also derived using Gibb's adsorption equation at 25°C. Standard free energies of micellization and adsorption were calculated. Solubilization behaviors of the synthesized surfactants were measured towards paraffin oil as solubilized material using light transmission technique.     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

Synthesis and surface activity of novel glucose ester surfactants containing carbohydrate and hydrocarbon chain

A series of glucosyl esters surfactants were synthesized based on glucose molecule by enzymatic catalysis. It could reach the highest esterification yield of 83.4% at the optimal condition, molar ratio of D-glucose and fatty acyl amino acid as 3:2 using 11% (w/w) enzyme catalyst Lipozyme 435 as catalyst in t-butanol at 40°C. The surface activities were studied, such as the critical micelle concentration (CMC), surface tension (γ_cmc), maximum excess concentration (Γ_max), minimum surface area/molecule (A_min), and the adsorption efficiency (pC₂₀); values of these were obtained by surface tension test. The results show that the longer the hydrophobic chain length, the lower the CMC and γ_cmc. The CMCs of novel glucosyl esters were between 4.4 and 1.5 mM. Further, the micellization physiochemical parameters, including Gibbs free energy of micellization (ΔG), standard enthalpy change (ΔH), and standard entropy change (ΔS) were calculated. It was indicated the micellization of glucosyl esters 9–16 was driven by entropy and deduced at different temperature.     

Lipophilic counterion effect on aggregation and adsorption behavior of quaternary ammonium surfactants

The obvious different aggregation and adsorption behavior of six newly quaternary ammonium surfactants with different lipophilic counterions has been discoverd by measurements of equilibrium and dynamic surface tension, fluorescence and conductivity. Interestingly, the critical micelle concentration (CMC) and its surface tension γ_CMC decrease with the increasing counterion chain length. However, three methods have confirmed that an exception of CMC increases slightly from C₁₆NC₁ to C₁₆NC₂. According to experimental results, a balanced mechanism between hydrophobicity and electrostatic of counterion is proposed. Besides, the dynamic surface tension results show the diffusion coefficient increases with the increasing counterion length both at a short time (D_t?→?0) and long time (D_t?→?∞), which indicates a faster adsorption process. Unlike the inorganic counterion, the diffusion coefficient decreases with the increase of hydrophobic chain length. This is attributed to the strong electrostatic interactions between counterions and cationic headgroups.     

Physicochemical Properties and Surface Tension Prediction of Mixed Surfactant Systems: Triton X‐100 with Dodecylpyridinium Bromide and Triton X‐100 with Sodium Dodecylsulfonate

Dependences of the surface tension of aqueous solutions of ionic (dodecylpyridinium bromide, sodium dodecylsulfonate) and nonionic (Triton X‐100) surfactants and their mixtures on total surfactant concentration and solution composition were studied, and the surface tension of the mixed systems were predicted using different Miller's model. It was found that how to select the model for calculation of ω is corresponding to the degree of the deviation from the ideality during the adsorption of mixed surfactants. The compositions of micelles and adsorption layers at air‐solution interface as well as parameters (β^m, β^ads) of headgroup‐headgroup interaction between the molecules of ionic and nonionic surfactants were calculated based on Rubingh model. The parameters (B₁) of chain‐chain interaction between the molecules of ionic and nonionic surfactants were calculated based on Maeda model. The free energy of micellization calculated from the phase separation model (ΔG ₂ ^m ), and by Maeda's method (ΔG ₁ ^m ) agree reasonably well at high content of nonionic surfactant. The excess free energy ΔG _ads ^E and ΔG _m ^E (except α=0.4) for TX‐100/SDSn system are more negative than that TX‐100/DDPB system. These can be probably explained with the EO groups of TX‐100 surfactant carrying partial positive charge.     

Study on Binding Properties of Poorly Soluble Drug Trimethoprim in Anionic Micellar Solutions

Binding and distribution properties of trimethoprim (TMP) in the presence of various anionic surfactants; sodium octyl sulfate (C₈SO₄Na), sodium decyl sulfate (C₁₀SO₄Na), sodium lauryl sulfate (C₁₂SO₄Na), and sodium tetradecyl sulfate (C₁₄SO₄Na) has been studied by conductivity, spectrophotometry and surface tension measurements. The surface properties of anionic surfactants, that is, maximum surface excess concentration (Γ _max ) and minimum area per surfactant molecule (A _min ) at the air/water interface have been evaluated in the absence and presence of TMP using Gibbs adsorption isotherm. From conductivity data the ionization degree and counterion binding parameter have been obtained. Spectrophotometric experiments were used to determine binding constants of TMP to anionic micelles. With the increasing alkyl chain of surfactants, the interaction becomes stronger, which shows the importance of hydrophobic forces and incorporation of TMP molecules to the pure micelles of anionic surfactants increased. The results obtained from the surface tension and conductometric studies have been correlated with those obtained from the spectroscopic studies and binding tendency of TMP to anionic micelles followed the order as: C₁₄SO₄Na > C₁₂SO₄Na > C₁₀SO₄Na > C₈SO₄Na. From these results, the study of the interaction TMP in different anionic micellar solutions provided information about the characteristics of binding properties of poorly soluble drugs.     

Surface activity—thermodynamic properties and light scattering studies for some novel aliphatic polyester surfactants

The preparation of 12 new polyester surfactants based on aliphatic amines and different ethylene oxide content is described. These surfactants were characterized by determining their molecular weights and polydispersity by gel permeation chromatography (GPC) and nitrogen content. Drop volume tensiometry (DVT) was used to measure the surface tension at 25, 35, 45 and 55°C. The surface tension isotherms were used to determine critical micelle concentration (CMC), maximum Gibb's adsorption (Γ_max), minimum area per molecule (A_min), the effectiveness of surface tension reduction (π_cmc) and the efficiency (pC₂₀). The thermodynamic parameters of micellization (ΔG_mic, ΔH_mic, ΔS_mic) and of adsorption (ΔG_ad, ΔH_ad, ΔS_ad) were calculated and the data showed that these surfactants favor micellization to adsorption. The static scattered light intensity measurements provide the calculation of the molecular weight of micelle and the aggregation number (N°), while the dynamic light scattering provide the hydrodynamic radius of micelle (R_H) and the diffusion coefficient at different surfactant concentrations. The hydrodynamic radius of micelle (R_H) at different surfactant concentrations could be used also to determine the CMC giving results that are comparable to those obtained by surface tension measurements. All the data are discussed regarding the chemical structure of the polymeric surfactants. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and Evaluation of Surface Active Properties of Ester-Based Cationic Imidazolium Monomeric Surfactants

New imidazolium cationic surfactants have been synthesized by esterification of halogenated carboxylic acids with long-chain fatty alcohols furnishing respective esters (dodecyl-2-chloroacetate, tetradecyl-2-chloroacetate, hexadecyl-2-chloroacetate, dodecyl-2-bromoacetate, tetradecyl-2-bromoacetate, and hexadecyl-2-bromoacetate) followed by their subsequent treatment with 1-trifluoro acetyl imidazole resulting into the formation of title monomeric surfactants: 3-(2-(hexadecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium chloride (7); 3-(2-(tetradecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium chloride (8); 3-(2-(dodecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium chloride (9); 3-(2-(hexadecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium bromide (10); 3-(2-(tetradecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium bromide (11) and 3-(2-(dodecyloxy)-2-oxoethyl)-1-(2,2,2-trifluoroacetyl)-1H-imidazol-3-ium bromide (12). Their identifications are based on IR, ¹H, ¹³C NMR, DEPT, and mass spectral studies. The dynamics of surface activity of these surfactants have also been investigated in the presence of sodium halides (NaCl and NaBr) by surface tension measurement. A series of useful parameters like critical micelle concentration (cmc), surface tension at the cmc (γ_cmc), adsorption efficiency (pC₂₀), effectiveness of surface tension reduction (Π_cmc), Gibbs free energy of the micellization (ΔG_0mic), and Gibbs free energy of adsorption (ΔG_0ads) have been determined from the measurements obtained by surface tension and conductivity method. Further with the application of the Gibbs adsorption isotherm, maximum surface excess concentration (Γ_max), and minimum surface area/molecule (A_min) at the air-water interface were also estimated. Thermal stability of these long-chain cationics have been measured by thermal gravimetric analysis under nitrogen atmosphere. Analysis of thermal stability measurement indicated that the thermal stability of these long-chain imidazoliums increase with an increase in chain length.     

Synthesis of Amphoteric Surfactants via Esterification Process

This article describes the synthesis of a novel amphoteric surfactant through esterification of 2‐hydroxy‐N,N,N‐trimethylethanaminium chloride with maleic acid alkyl ester of C₈, C₁₀, and C₁₂ chain length in the presence of base. Maleic acid alkyl esters were synthesized by the reaction of maleic anhydride with alkyl alcohol. Surface‐active properties were studied by different techniques such as surface tension and foaming property. Critical micelle concentrations (CMCs) were found by using surface tension values to learn the effect of chain length on CMC of synthesized surfactants. The best result obtained has minimal coproducts, an environmentally safer route, and a very good CMC value of surfactants.     

Studies on the Effects of Additional Components on Micellization of CTAB via Surface Tension Measurements

The effects of Tris-HCl buffer solution on the cmc of cetyltrimethylammonium bromide (CTAB) were studied by surface tension measurement. The result shows that the effect of the buffer solution depends on the interaction between CTAB and NaCl and the structure accelerants of water, Tris. A series of parameters, including the critical micelle concentration (cmc), the surface tension at cmc (γ_cmc), the adsorption efficiency (pC₂₀), and the effectiveness of surface tension reduction (∏_cmc) were obtained from the surface tension measurements in the presence of glycine with different concentration in the Tris-HCl buffer solution at 27°C. In addition, maximum surface excess concentration (Γ _max) and minimum surface area per molecule (A_min) at the air-water interface were estimated according to the Gibbs adsorption isotherm. The thermodynamic parameters (Δ C _p,m , Δ H _m,tr , Δ C _p,m,tr ) of micellization for CTAB in the absence and presence of glycine at different temperature were also been obtained.     

Micellization of anionic gemini surfactants and their interaction with polyacrylamide

A series of anionic gemini surfactants have been synthesized. The surface properties and micellization process of as-prepared sulfonate gemini surfactants (SGS) and carboxylate gemini surfactant (CGS) have been studied by surface tension measurement and isothermal titration microcalorimetry. Meanwhile, the interaction of these five surfactants with polyacrylamide (PAM) was investigated using surface tension, steady-state fluorescence measurement, and isothermal titration microcalorimetry. The results show that the critical micelle concentrations (CMCs) of above-mentioned surfactants are more than 1 order of magnitude lower than those of corresponding single chain surfactants. Moreover, the enthalpy of micelle formation (ΔH _mic) for the investigated gemini surfactants is negative. In the surfactant–PAM systems, the thermodynamic parameters of binding have also been determined. The conclusion may be drawn that the binding strength of SGS onto PAM is stronger than that of CGS, resulting from more compact structure of SGS aggregates. With increasing surfactant hydrophobicity, the values of ΔH _agg become more exothermic and a ΔS _agg decrease was observed. Therefore, the interaction between SGS and PAM is enthalpy-driven.     

Synthesis and properties of nonylphenol-substituted dodecyl sulfonate

Nonylphenol-substituted dodecyl sulfonate (C₁₂-NPAS) was synthesized via sulfonation-alkylation-neutralization using 1-dodecene, SO₃, and nonylphenol as raw materials. The properties such as surface tension, interfacial tension (IFT), wettability, foam properties, and salinity tolerance of C₁₂-NPAS were systematically investigated. The results show that the critical micelle concentration (CMC) of C₁₂-NPAS was 0.22?mmol?·?L^?1 and the surface tension at the CMC (γ_CMC) of C₁₂-NPAS was 29.4 mN/m. When compared with the traditional surfactants sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), and linear alkylbenzene sulfonate (LAS), the surface properties of C₁₂-NPAS were found to be superior. The IFT between Daqing crude oil and a weak-base alkaline/surfactant/polymer (ASP) oil flooding system containing 0.1?wt% of C₁₂-NPAS can reach an ultralow level of 2.79?×?10^?3 mN/m, which was lower than that found for the traditional surfactant heavy alkylbenzene sulfonate (HABS). The salinity and hardness tolerance of C₁₂-NPAS were much stronger than those found for conventional surfactants, petroleum sulfonate, and LAS. C₁₂-NPAS also shows improved wetting performance, foamability, and foam stability.