Crystallization behavior and thermal property of biodegradable poly(3‐hydroxybutyrate)/multi‐walled carbon nanotubes nanocomposite

Biodegradable poly(3‐hydroxybutyrate) (PHB)/functionalized multi‐walled carbon nanotubes (f‐MWNTs) nanocomposite was prepared in this work by solution casting method at 2 wt% f‐MWNTs loading. Scanning electron microscopy and transmission electron microscopy observations indicate a homogeneous distribution of f‐MWNTs in the PHB matrix. Nonisothermal melt crystallization, overall isothermal melt crystallization kinetics, and crystalline morphology of neat PHB and the PHB/f‐MWNTs nanocomposite were studied in detail. It is found that the presence of f‐MWNTs enhances the crystallization of PHB during nonisothermal and isothermal melt crystallization processes in the nanocomposite due to the heterogeneous nucleation effect of f‐MWNTs. Moreover, the incorporation of a small quantity of f‐MWNTs apparently improves the thermal stability of the PHB/f‐MWNTs nanocomposite with respect to neat PHB. Two methods are employed to study the activation energies of thermal degradation for both the neat PHB and the PHB/f‐MWNTs nanocomposite. The activation energy of thermal degradation of the PHB/f‐MWNTs nanocomposite is higher than that of neat PHB. Copyright © 2009 John Wiley & Sons, Ltd.     

Crystallization behavior and thermal property of biodegradable poly(butylene succinate)/functional multi-walled carbon nanotubes nanocomposite

Biodegradable poly(butylene succinate) (PBSU)/functional multi-walled carbon nanotubes (f-MWNTs) nanocomposite were prepared by melt compounding. Nonisothermal crystallization and subsequent melting behavior, isothermal crystallization kinetics, spherulitic morphology, and crystal structure of neat PBSU and its nanocomposite were studied by differential scanning calorimetry, optical microscopy and wide angle X-ray diffraction in detail. The presence of f-MWNTs has a significant heterogeneous nucleation effect on the crystallization and morphology of PBSU, resulting in that the crystallization is enhanced during both nonisothermal and isothermal crystallization in the nanocomposite. Moreover, the crystal structure of PBSU is not modified by f-MWNTs in the nanocomposite. The thermogravimetric analysis illustrates an improvement in thermal stability of PBSU by around 10 °C in the presence of f-MWNTs compared with that of neat PBSU.     

Influence of low multi‐walled carbon nanotubes loadings on the crystallization behavior of biodegradable poly(butylene succinate) nanocomposites

Biodegradable poly(butylene succinate) (PBSU)/carboxyl‐functionalized multi‐walled carbon nanotubes (f‐MWNTs) nanocomposites were prepared via solution casting method at low f‐MWNTs loadings of 0.5 and 1 wt%, respectively, in this work. Scanning and transmission electron microscopic observations reveal a fine dispersion of f‐MWNTs throughout the PBSU matrix. Non‐isothermal melt crystallization at different cooling rates, isothermal melt crystallization at different crystallization temperatures, spherulitic morphology, and crystal structure of neat PBSU and its nanocomposites were investigated with various techniques in detail. The addition of f‐MWNTs is found to enhance the crystallization of PBSU, apparently in the nanocomposites during both nonisothermal and isothermal melt crystallization, due to the heterogeneous nucleation effect; however, the crystallization mechanism and crystal structure of PBSU remain almost unchanged. Effect of the presence of f‐MWNTs and their loadings on the thermodynamic driving force for nucleation and nucleation activity of PBSU was evaluated quantitatively through two methods. Moreover, it is found that incorporating with 1 wt% f‐MWNTs significantly improves the storage modulus of PBSU in the nanocomposites by about 147% at room temperature as compared with that of neat PBSU. Copyright © 2010 John Wiley & Sons, Ltd.     

Morphology,rheological and crystallization behavior in non-covalently functionalized carbon nanotube reinforced poly(butylene succinate) nanocomposites with low percolation threshold

Multi-walled carbon nanotubes (CNTs) were non-covalently functionalized by surface wrapping of poly(sodium 4-styrenesulfonate) (PSS) with the aid of ultrasound. The functionalized CNTs were incorporated into poly(butylene succinate) (PBS) through solution coagulation to fabricate CNTs filled PBS nanocomposites. The morphologies of the PBS/CNT nanocomposites were studied by scanning electron microscope (SEM) and transmission electron microscope (TEM), and the effect of loading of functionalized CNT on the rheological behavior, electrical conductivity and mechanical properties of the nanocomposites was investigated systemically. SEM observation indicates that functionalized CNTs dispersed in PBS matrix without obvious aggregation and showed good interfacial adhesion with the PBS phase. TEM observation reveals that a CNT network was formed when the loading of CNTs increased from 0.1 to 0.3 wt%. Rheological investigation indicates the formation of a CNT network with a percolation threshold of only 0.3 wt%. Significant improvement in electrical conductivity occurred at CNT loading of 0.3 wt%, with the value of electrical conductivity increasing by six orders of magnitude compared to neat PBS. Differential scanning calorimetry indicates that the melt crystallization temperature of PBS was improved by ∼14 °C with addition of only 0.05 wt% functionalized CNTs. Tensile tests indicate that both the yield strength and Young's modulus of PBS were apparently reinforced by incorporation of functionalized CNTs, while the elongation at break was reduced gradually.     

Properties of matrix-grafted multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites synthesized by in situ reversible addition-fragmentation chain transfer polymerization

Multi-walled carbon nanotubes (MWCNT)/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by the in situ reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in the presence of MWCNTs, at which the bulk polymer was grafted onto the surface of nanotubes through the ??grafting through?? strategy. For this purpose, MWCNTs were formerly functionalized with polymerizable MMA groups. MMA and PMMA-grafted MWCNTs were characterized by Fourier-transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Dissolution of nanotubes was examined in chloroform solvent and studied by UV?Cvis spectroscopy. Thermogravimetric and degradation behavior of prepared nanocomposites was investigated by TGA. MWCNTs had a noticeable boosting effect on the thermal stability of nanocomposites. TGA thermograms showed a two-step weight loss pattern for the degradation of MWCNT-PMMA/PMMA nanocomposites which is contrast with neat PMMA. Introduction of MWCNTs also improved the dynamic mechanical behavior and electrical conductivity of nanocomposites. TEM micrograph of nanocomposite revealed that the applied methods for functionalization of nanotubes and in situ synthesis of nanocomposites were comparatively successful in dispersing the MWCNTs in PMMA matrix.     

Preparation and properties of compatibilized LDPE/organo-modified montmorillonite nanocomposites

Nanocomposites based on low density polyethylene, containing of 3 or 6 wt.% of organo-modified montmorillonite nanoclay (MMT-ODA) and maleic anhydride grafted low density polyethylene as a compatibilizer were prepared by melt mixing and characterized. Exfoliation of silicate layers was achieved, as confirmed by X-ray diffraction and transmission electron microscopy. The compatibilized nanocomposites exhibit improved thermal stability in air as compared to neat polyethylene and nonexfoliated MMT-ODA composite. The crystallinity and crystallization kinetics of polyethylene matrix is not affected significantly by the presence of MMT-ODA clay. Drawability of the compatibilized nanocomposite with 6 wt.% of MMT-ODA is similar to neat polyethylene, whereas the composition having the same amount of MMT-ODA, without compatibilizer, exhibits poorer drawability. Scanning electron microscopy and density measurements of drawn samples indicate the existence of pores in noncompatibilized composite while no pores and good adhesion to MMT-ODA are found in compatibilized nanocomposites.     

Multi walled carbon nanotubes induced viscoelastic response of polypropylene copolymer nanocomposites: Effect of filler loading on rheological percolation

Polypropylene random copolymer nanocomposites having 0.2–7.0 vol% multi-walled carbon nanotubes (MWCNTs) were prepared via melt processing. Transmission electron microscopy (TEM) was employed to determine the nano scale dispersion of carbon nanotubes. Linear viscoelastic behavior of these nanocomposites was investigated using parallel plate rheometry. Incorporation of carbon nanotubes in the polymer matrix resulted in higher complex viscosity (η*), storage (G′) and loss modulus (G″) as compared to neat polymer, especially in the low-frequency region, suggesting a change from liquid to solid-like behavior in the nanocomposites. By plotting storage modulus vs. carbon nanotube loading and fitting with a power law function, the rheological percolation threshold in these nanocomposites was observed at a loading of ∼0.27 vol% of MWCNTs. However, electrical percolation threshold was reported at ∼0.19 vol% of MWCNTs loading. The difference in the percolation thresholds is understood in terms of nanotube connectivity with nanotubes and polymer chain required for electrical conductivity and rheological percolation.     

Nonisothermal melt crystallization and subsequent melting behavior of biodegradable poly(hydroxybutyrate)/multiwalled carbon nanotubes nanocomposites

In this work, nonisothermal melt crystallization and subsequent melting behavior of poly(hydroxybutyrate) (PHB) and its nanocomposites at different multiwalled carbon nanotubes (MWCNTs) loadings were investigated. Increasing the MWCNTs loadings has enhanced the nonisothermal melt crystallization of PHB significantly in the nanocomposites when compared with that of the neat PHB; furthermore, increasing the cooling rates shift the crystallization exotherms to low temperature range for both neat PHB and its nanocomposites. Double melting behavior is found for both neat PHB and its nanocomposites crystallized nonisothermally from the melt, which is explained by the melting, recrystallization, and remelting model. Effects of the MWCNTs loadings, cooling rates, and heating rates on the subsequent melting behavior of PHB were studied in detail. It is found that increasing the MWCNTs loadings, decreasing the cooling rates, and increasing the heating rates would restrict the occurrence of the recrystallization of PHB in the nanocomposites. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2238–2246, 2009     

Polypropylene/carbon nanotube magnetic composites obtained using carbon nanotubes from sawdust

Magnetic polypropylene (PP) nanocomposites with different loadings (from 0.5 to 20 wt %) of carbon nanotubes with iron (CNT‐Fe) were fabricated using the melt‐mixing method. The carbon nanotubes were synthesized by pyrolysis of sawdust from the furniture industry. The morphological characterization shows homogenous dispersion of the filler in the polymer matrix. The addition of only 0.5 wt % CNT‐Fe already results in ferromagnetic behavior in the diamagnetic polymer matrix. The thermal properties were investigated using thermogravimetric analysis and differential scanning calorimetry. The results show an increase in the maximum degradation, crystallization, and melting temperatures of the nanocomposites compared with neat PP. The nanocomposites showed improvement in terms of mechanical and oxygen permeability properties. A very significant result of the work is the high remnant magnetization and coercivity values of the nanocomposites at room temperature whereas most of the works on similar systems show magnetic properties only at very low temperatures.     

Comparative study on the properties of poly(trimethylene terephthalate) ‐based nanocomposites containing multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS2) nanotubes

Multi‐walled carbon (MWCNT) and tungsten disulfide (INT‐WS₂) nanotubes are materials with excellent mechanical properties, high electrical and thermal conductivity. These special properties make them excellent candidates for high strength and electrically conductive polymer nanocomposite applications. In this work, the possibility of the improvement of mechanical, thermal and electrical properties of poly(trimethylene terephthalate) (PTT) by the introduction of MWCNT and INT‐WS₂ nanotubes was investigated. The PTT nanocomposites with low loading of nanotubes were prepared by in situ polymerization method. Analysis of the nanocomposites' morphology carried out by SEM and TEM has confirmed that well‐dispersed nanotubes in the PTT matrix were obtained at low loading (<0.5 wt%). Thermal and thermo‐oxidative stability of nanocomposites was not affected by the presence of nanotubes in PTT matrix. Loading with INT‐WS₂ up to 0.5 wt% was insufficient to ensure electrical conductivity of PTT nanocomposite films. In the case of nanocomposites filled with MWCNT, it was found that nanotube incorporation leads to increase of electrical conductivity of PTT films by 10 orders of magnitude, approaching a value of 10^?3 S/cm at loading of 0.3 wt%. Tensile properties of amorphous and semicrystalline (annealed samples) nanocomposites were affected by the presence of nanotubes. Moreover, the increase in the brittleness of semicrystalline nanocomposites with the increase in MWCNT loading was observed, while the nanocomposites filled with INT‐WS₂ were less brittle than neat PTT. Copyright © 2016 John Wiley & Sons, Ltd.     

The radiation degradation of a nanotube-polyimide nanocomposite

The radiation degradation of a nanotube-polyimide nanocomposite was studied. Radiation chemistry was observed that was not present in the unmodified polymer or in the imbedded single-walled carbon nanotubes (SWNTs) themselves. The tensile properties were found to be improved by the addition of SWNTs in the unirradiated materials, and no deterioration in these properties with irradiation was observed. The SWNTs were found to have a detrimental effect on the optical properties however. The transparency of the composite was degraded significantly faster by electron-beam radiation than the neat polymer was. This may make the SWNT/polyimide composites unsuitable for some space applications. Electron Spin Resonance (ESR) measurements determined that the SWNTs interfere with the radical chemistry in the irradiated materials. This could be due to energy dissipation by the SWNT network, preventing the formation of radical species, or alternatively, preferential reaction or termination of radicals by the nanotubes. FT-Raman spectroscopy was found to be a very useful tool for examining SWNTs embedded at low concentrations. It revealed no signs of SWNT degradation up to 10 MGy.     

Thermally stable exfoliated poly(ethylene terephthalate) (PET) nanocomposites as prepared by selective removal of organic modifiers of layered silicate

Exfoliated poly(ethylene terephthalate) (PET) nanocomposite excluding organic modifier (M-P_etLSN_eom) was successfully prepared by the melt processing via solution method with solvent-nonsolvent system. PET nanocomposites including organic modifier (M-P_etLSN_iom and D-P_etLSN) as counterpart of M-P_etLSN_eom were prepared by using the melt processing via solution method without solvent-nonsolvent system and the only conventional direct melt mixing process, respectively. From elemental analysis (EA) and thermogravimetric analysis (TGA), organic modifier in M-P_etLSN_eom was confirmed to be well removed by solution method with solvent-nonsolvent system. Then, it was found that M-P_etLSN_eom and M-P_etLSN_iom had exfoliated structure by wide angle X-ray diffraction (WAXD) and high-resolution transmission electron microscopy (HR-TEM), whereas no expansion of gallery height was observed for D-P_etLSN. To elucidate the effect of organic modifier on the physical properties of PET nanocomposites, the crystallization behavior, optical transparency, thermal stability, and mechanical properties of M-P_etLSN_eom, M-P_etLSN_iom, D-P_etLSN, and neat PET were evaluated by differential scanning calorimetry (DSC), UV-visible (UV-vis) spectroscopy, TGA, and universal testing machine (UTM). All of the PET nanocomposites exhibited faster crystallization kinetics and better thermal and mechanical properties compared to neat PET due to the presence of silicate layer in PET. However, M-P_etLSN_iom and D-P_etLSN including organic modifier showed lower crystallization constant rates, longer crystallization half times, and poorer optical, thermal, and mechanical properties than M-P_etLSN_eom. These results were ascribed to the thermal decomposition of the organic modifiers presented in M-P_etLSN_iom and D-P_etLSN during the melt processing.     

Properties of biodegradable poly(butylene carbonate) (PBC) composites with fumed silica nanoparticles

Biodegradable poly(butylene carbonate)/fumed silica (PBC/SiO₂) nanocomposites were prepared by melt compounding. The PBC/SiO₂ nanocomposites exhibited a good dispersion of aggregates of SiO₂ in the PBC matrix, and an improvement in mechanical properties. Nanoparticles affect, also, the thermal properties of PBC and especially the crystallization rate, which in all nanocomposites is faster than that of pure PBC. Due to ongoing crystallization and the crystal perfection during heating process, the melting peak of PBC shifted to higher temperature when heating from amorphous state with decreasing heating rate. With increasing cooling rate, the non-isothermal crystallization exotherms became wider and shifted to lower temperature. At a given cooling rate, the crystallization peak temperature of neat PBC was lower than that of its nanocomposite. Non-isothermal crystallization kinetic procedure, the method of Ozawa, was applied to the first deconvoluted DSC peak only by processing the data related to DSC peak. The average value of Ozawa exponent m of pure PBC is 3.04, while the one of its nanocomposite is about 2.98. Moreover, the thermal stability of the nanocomposites was increased. The T _d enhancement of the nanocomposite was remarkable.     

Halloysite nanotubes reinforced ultrahigh molecular weight polyethylene nanocomposite films with different filler concentration and modification

Halloysite nanotube/ultrahigh molecular weight polyethylene (HNT/UHMWPE) nanocomposite films were prepared by melt extrusion and thermal extension methods, and the morphology, microstructure, thermal properties, mechanical properties and wettability of these nanocomposite films were investigated with respect to the effects of HNT concentration and modification. HNTs were homogenously distributed and formed self entangled network structures in the UHMWPE matrix. The incorporation of HNT obviously accelerates the crystallization and enhances the thermal stability, mechanical strength and wettability of UHMWPE. However, after HNT concentration exceeds a critical value, the crystallinity and mechanical strength of UHMWPE decrease due to the restriction of HNT obstacles and the existence of large HNT agglomerates. Surface modification of HNT is a good method to further improve the crystallization, thermal stability and mechanical property of UHMWPE nanocomposites, with reduction of nanotube aggregation and strengthening of interfacial bonding between nanotubes and matrix.     

Melt‐crystallization mechanism of poly(ethylene terephthalate)/multi‐walled carbon nanotubes prepared by in situ polymerization

A series of poly(ethylene terephthalate)/multi‐walled carbon nanotubes (PET/MWCNTs) nanocomposites were prepared by in situ polymerization using different amounts of multi‐walled carbon nanotubes (MWCNTs). The polymerization of poly(ethylene terephthalate) (PET) was carried out by the two‐stage melt polycondensation method. The intrinsic viscosity (IV) of the composites is ranged between 0.31 and 0.63 dL/g depending on the concentration of the MWCNTs. A decrease of IV was found by increasing MWCNTs content. This is due to the reactions taking place between the two components leading to branched and crosslinked macromolecules. These reactions are, mainly, responsible for thermal behavior of nanocomposites. The melting point of the nanocomposites was shifted to slightly higher temperatures by the addition till 0.55 wt % of MWCNTs while for higher concentration was reduced. The degree of crystallinity in all nanocomposites was, also, reduced by increasing MWCNTs amount. However, from crystallization temperature, it was found that MWCNTs till 1 wt % can enhance the crystallization rate of PET, whereas at higher content (2 wt %), the trend is the opposite due to the formation of crosslinked macromolecules. From the extended crystallization analysis, it was proved that MWCNTs act as nucleating agents for PET crystallization. Additionally, the crystallization mechanism due to the existence of MWCNT becomes more complicated because two mechanisms with different activation energies are taking place in the different degrees of crystallization, depending on the percentage of MWCNT. The effect of molecular weight also plays an important role. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1452–1466, 2009     

Oligoaniline assisted dispersion of carbon nanotubes in epoxy matrix for achieving the nanocomposites with enhanced mechanical,thermal and tribological properties

A critical challenge for initiating many applications of the carbon nanotubes (CNTs) is their dispersion in organic solvent or in polymer melt. In the present study, we described a novel strategy for fabricating carbon nanotubes (CNTs)-reinforced epoxy nanocomposite by utilizing aniline trimer (AT) as the noncovalent dispersant. Tensile testing showed that the tensile modulus of the CNTs-reinforced epoxy composites was considerably improved by adding a small amount of AT functionalized CNTs. Additionally, the as-prepared CNTs-epoxy nanocomposites exhibited superior tribological properties with much lower frictional coefficients and wear rates compared to those of neat epoxy resin. The well dispersed AT-functionalized CNTs in epoxy matrix played an important role in enhancing the mechanical properties, as well as acting as a solid lubricant for improving the tribological performance of epoxy/CNTs nanocomposite.     

Enthalpy relaxation in the cooling/heating cycles of polypropylene/organosilica nanocomposites: I: Non-isothermal crystallization

Non-isothermal crystallization of the neat isotactic polypropylene homopolymer (PP-0) and of a series of nanocomposites (PNC) containing up to 4.68 vol.% of organosilica was studied in the standard DSC mode during constant-rate cooling from the melt state.Analysis of the nucleation parameters derived from cooling rate dependencies of the temperatures for the onset of crystallization exotherms revealed a slight but systematic increase of the nucleation barrier for lamellar crystallization of PP in the PNC concomitant to stronger restrictions to transport of PP segments across the melt/lamellar crystal interface. The overall crystallization rate data for the PNC were consistent with the assumption of two separate contributions from the initial (unconstrained), and the subsequent (constrained) growth mechanisms, respectively.The obtained results were considered as evidence for the coexistence in undercooled PP melts of the PNC of initial crystal nucleation and growth sites characteristic for the neat PP-0, and the basically different sites (presumably, PP chains anchored by both ends to the surfaces of two adjacent nanoparticles).     

Rheology of polycarbonate reinforcedwith functionalized and unfunctionalized single-walled carbon nanotubes

Nanocomposites of polycarbonate (PC) containing low concentrations of pristine and COOH and OH functionalized single-walled carbon nanotubes (SWNTs, COOH-SWNTs and OH-SWNTs) were prepared by melt-mixing and analyzed using rheology and scanning electron microscopy (SEM). The steady state and linear viscoelastic behavior of each nanocomposite material is presented and compared to that of the neat PC. SEM analysis revealed that samples containing functionalized SWNTs were more dispersible than samples containing the pristine SWNTs.     

Effect of MWCNTs and graphene on the crystallization of polyurethane based nanocomposites,analyzed via calorimetry,rheology and AFM microscopy

Isothermal crystallization of two nanocomposites composed of multiwalled carbon nanotubes (MWCNT) and graphene dispersed in a hot melt adhesive polyurethane (PUR) is investigated. Rheological percolation is reached for PUR/MWCNT, but not for PUR/Graphene nanocomposites. Analysis of the elastic modulus versus time indicates that the crystallization process is more hastened by MWCNTs than by graphene, favouring the welding process of the corresponding adhesives. Correlative AFM images show that the crystal size follows the order: Crystals in neat PUR > Crystals in PUR/Graphene > Crystals in PUR/MWCNT. The nucleation density is higher in the case of MWCNTs due to the poorer dispersion of graphene in the PUR matrix. Analysis of DSC results by the Avrami equation and the fitting of G′-time results to a rheological equation adapted from the Avrami equation, show that the parameter n decreases from n = 3 for neat PUR to n = 2 for both nanocomposites. The coherence between the value n = 2 and AFM images is demonstrated: The lamellae organization in two dimensional growth, that brings about nucleated axialites, as expected for n = 2, is confirmed by AFM microscopy.