NMR parameters of SiC-doped (6,0) zigzag single-walled boron phosphide nanotubes: a density functional study

Abstract  

Nuclear magnetic resonance (NMR) parameters including isotropic and anisotropic chemical shielding parameters and electronic structures were calculated using density functional theory (DFT) for silicon–carbide-doped boron phosphide nanotubes. Geometry optimizations were carried out at the B3LYP/6-31G* level of theory using the Gaussian 03 program suite. The isotropic and anisotropic chemical shielding parameters were calculated for the sites of various ¹³C, ²⁹Si, ¹¹B, and also ³¹P atoms in pristine and SiC-doped (6,0) zigzag boron phosphide nanotube models. The calculations indicated that doping of ¹¹B and ³¹P atoms by C and Si atoms had a more significant influence on the calculated shielding tensors than did doping of the B and P atoms by Si and C atoms. In comparison with the pristine model, Si- and C-doping of P and B sites of the zigzag nanotubes reduces the energy gaps of the nanotubes and increases their electrical conductance.     

Density Functional Theory studies on interactions of phosphoryl ligands with the Ca cation: Affinity and associated parameters

DFT (B3LYP/6-31G(d)) and semi-empirical (PM6) calculations of Ca²⁺ affinities on a set of substituted phosphoryl ligands were performed with complete geometry optimization. Two types of ligands were calculated: a set of trivalent [OP(R)] and a set of pentavalent [OP(R)₃] ones (R = H, F, Cl, Br, OH, OCH₃, CH₃, CN, NH₂ and NO₂), with R either directly bound to the phosphorus atom or to the para position of a phenyl ring. The affinity of the Ca²⁺ cation for the ligands was quantified in terms of interaction energy. Additionally, geometric and electronic parameters were correlated with the intensity of that interaction. Our results show that the electronic nature of the substituent mainly affects the interaction energy. Donor groups are associated with more negative interaction energies, while acceptor groups are associated with less negative interaction energies.     

Synthesis of Branched Polyglucans by the Tandem Action of Potato Phosphorylase and Deinococcus geothermalis Glycogen Branching Enzyme

An enzymatic tandem reaction is described in which the enzymes phosphorylase and Deinococcus geothermalis glycogen branching enzyme (Dg GBE) catalyze the synthesis of branched polyglucans from glucose‐1‐phosphate (G‐1‐P). Phosphorylase consumes G‐1‐P and polymerizes linear amylose while Dg GBE introduces branching points on the α‐(1 → 6) positions by reshuffling short oligosaccharides. The resulting branched polyglucans have an unusually high degree of branching of 11%.

     

Orthophosphate binding at the dimer interface of <Emphasis Type="Italic">Corynebacterium callunae</Emphasis> starch phosphorylase: mutational analysis of its role for activity and stability of the enzyme

Background  

Orthophosphate recognition at allosteric binding sites is a key feature for the regulation of enzyme activity in mammalian glycogen phosphorylases. Protein residues co-ordinating orthophosphate in three binding sites distributed across the dimer interface of a non-regulated bacterial starch phosphorylase (from Corynebacterium callunae) were individually replaced by Ala to interrogate their unknown function for activity and stability of this enzyme.     

Adsorption properties of OCN radical on (6,0), (8,0), and (10,0) zigzag single-walled carbon nanotubes: a density functional study

Abstract  

The behavior of the OCN radical adsorbed on the external surface of H-capped (6,0), (8,0), and (10,0) zigzag single-walled carbon nanotubes was studied by using density functional calculations. Geometry optimizations were carried out at the B3LYP/6-31G* level of theory using the Gaussian 98 suite of programs. We present the nature of the OCN radical–surface interaction in selected sites of the nanotubes. Binding energies corresponding to adsorption of the OCN radical are calculated to be in the range 280–315 kJ mol⁻¹. More efficient binding energies cannot be achieved by increasing the nanotube diameter. We also provide the effects of OCN radical adsorption on the electronic properties of the nanotubes.     

Hydrogen-bonding interaction of 5,6-dihydrouracil with RNA bases: DFT and MP2 studies

5,6-Dihydrouracil (DHU) is a rare pyrimidine base naturally occurring in tRNAs, it differs from the base uracil due to the saturation of the C₅–C₆ bond. This work presents the interaction energies of complexes formation involving DHU bound to the natural RNA bases adenine (A), uracil (U), guanine (G), and cytosine (C). Full geometry optimization has been performed for the studied complexes by B3LYP/6-31+G(d,p) and MP2/6-31+G(d,p) calculations. The interaction energies were corrected for the basis-set superposition error (BSSE), using the full Boys–Bernardi counterpoise correction scheme. We find that the stability order is DHU:G > DHU:A > DHU:C  DHU:U.     

An Ab Initio Molecular Orbital Theory and Density Functional Theory (DFT) Study of Conformers and Rotamers of 4-Substituted (Methyl, Hydroxymethyl, Methanoyl, Ethanoyl, Cyano, Fluoro, Chloro, Bromo, Acetoxy) Tetrahydro-2H-thiopyran-1,1-dioxides

The structures and energies of axial and equatorial conformers and rotamers of 4-substituted tetrahydro-2H-thiopyran-1,1-dioxides (tetrahydrothiopyran-1,1-dioxides, thiacyclohexane-1,1-dioxides, thiane-1,1-dioxides, and 1,1-dioxothianes; CH₃, CH₂OH, CHO, COCH₃, CN, F, Cl, Br, and OCOCH₃) were calculated using the hybrid density functionals B3LYP, B3P86, and B3PW91, as well as MP2 and the 6-31G(d), 6-31G(2d), 6-31G(3d), 6-31G(d,p), and 6-31+G(d) basis sets. MP2/6-31+G(d)/ /HF/6-31+G(d) [–G° = 1.73 kcal/mol], B3P86/6-31G(d) [–G° = 1.75 kcal/mol], and B3PW91/6-31G(d) [–G° = 1.85 kcal/mol] gave conformational free energy (G°) values at 180 K for 4-methyltetrahydro-2H-thiopyran-1,1-dioxide which were similar to the reported experimental values for methylcyclohexane (–G° = 1.80 kcal/mol), 4-methyltetrahydro-2H-thiopyran (–G° = 1.80 kcal/mol), and other 4-methyl-substituted heterocycles. All levels of theory showed that the conformational preferences of the 4-methanoyl (4-formyl), 4-ethanoyl (4-acetyl), and 4-cyano substituents were small. The HF calculations gave conformational free energy (G°) values for 4-chlorotetrahydro-2H-thiopyran-1,1dioxide which were closer to the experimental value than the MP2 and density functional methods. The best agreement with available experimental data for 4-bromotetrahydro-2H-thiopyran-1,1-dioxide was obtained from the HF/6-31G(2d), HF/6-31G(3d), and B3LYP/6-31G(2d) calculations, and, for 4-acetoxytetrahydro-2H-thiopyran-1,1-dioxide, from the HF/6–31G(3d) calculations. The conformational free energies (G°) and relative energies (E) of the conformers and rotamers have been compared with the correspondingly substituted cyclohexanes and tetrahydro-2H-thiopyrans and are discussed in terms of dipole–dipole (electrostatic) interactions and repulsive nonbonded interactions (steric) in the most stable axial and equatorial conformers. The axial S=O bond lengths are shorter than the equatorial S=O bond lengths and the C2–C3 bond lengths in the substituents with carbon-bonded to the ring are shorter than the C3–C4 and C4–C-5 bond lengths. In contrast, the C2–C3 bond lengths in the 4-halogen and 4-acetoxy substituents are longer than the C3–C4 and C4–C-5 bond lengths.     

Synthesis and preliminary cytotoxicity study of a cephalosporin-CC-1065 analogue prodrug

Background  

Antibody-directed enzyme prodrug therapy (ADEPT) is a promising new approach to deliver anticancer drugs selectively to tumor cells. In this approach, an enzyme is conjugated to a tumor-specific antibody. The antibody selectively localizes the enzyme to the tumor cell surface. Subsequent administration of a prodrug substrate of the enzyme leads to the enzyme-catalyzed release of the free drug at the tumor site. The free drug will destroy the tumor cells selectively, thus, reducing side effects.     

SEM-EDS investigation on PM10 data collected in Central Italy: Principal Component Analysis and Hierarchical Cluster Analysis

Background

Principal Component Analysis (PCA) and Hierarchical Cluster Analysis (HCA) were applied on PM10 particle data in order to: identify particle clusters that can be differentiated on the bases of their chemical composition and morphology, investigate the relationship among the chemical and morphological parameters and evaluate differences among the sampling sites. PM10 was collected in 3 different sites in central Italy characterized by different conditions: yard, urban and rural sites. The concentration of 20 chemical parameters (C, O, Na, Mg, Al, Si, P, Cd, Cl, K, Ca, Sn, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn) were determined by Scanning Electron Microscopy – Energy Dispersive X-ray Spectroscopy (SEM-EDS) and the particle images were processed by an image analysis software in order to measure: Area, Aspect Ratio, Roundness, Fractal Dimension, Box Width, Box Height and Perimeter.

Result

Results revealed the presence of different clusters of particles, differentiated on the bases of chemical composition and morphological parameters (aluminosilicates, calcium particles, biological particles, soot, cenosphere, sodium chloride, sulphates, metallic particles, iron spherical particles). Aluminosilicates and Calcium particles of rural and urban sites showed a similar nature due to a mainly natural origin, while those of the yard site showed a more heterogeneous composition mainly related to human activity. Biological particles and soot can be differentiated on the bases of the higher loads of Fractal Dimension, which characterizes soot, and content of Na, Mg, Ca, Cl and K which characterize the biological ones. The soot of the urban site showed higher loadings of Roundness and Fractal Dimension than the soot belonging to the yard and rural sites, this was due to the different life time of the particles. The metal particles, characterized mainly by the higher loading of iron, were present in two morphological forms: spherical and angular particles. The first were generated by a fusion process at high temperature, while the second one had crustal origin (those characterized by typical terrigenous elements) and also human origin.

Conclusion

In this work a protocol for the morphological-chemical characterization of single particles has been developed. SEM analysis allows to classify particles in 10 different families and PCA and HCA have provided information about the sources of PM and similarities and differences among the sites.

Open image in new window

     

Immunoaffinity purification and characterization of mitochondrial membrane-bound D-3-hydroxybutyrate dehydrogenase from <Emphasis Type="Italic">Jaculus orientalis</Emphasis>

Background  

The interconversion of two important energy metabolites, 3-hydroxybutyrate and acetoacetate (the major ketone bodies), is catalyzed by D-3-hydroxybutyrate dehydrogenase (BDH¹: EC 1.1.1.30), a NAD⁺-dependent enzyme. The eukaryotic enzyme is bound to the mitochondrial inner membrane and harbors a unique lecithin-dependent activity. Here, we report an advanced purification method of the mammalian BDH applied to the liver enzyme from jerboa (Jaculus orientalis), a hibernating rodent adapted to extreme diet and environmental conditions.     

Stabilization and Release of Enzymes from Silk Films

A significant challenge remains to protect protein drugs from inactivation during production, storage, and use. In the present study, the stabilization and release of horseradish peroxidase (HRP) in silk films was investigated. Water‐insoluble silk films were prepared under mild aqueous conditions, maintaining the activity of the entrapped enzyme. Depending on film processing and post‐processing conditions, HRP retained more than 90% of the initial activity at 4 °C, room temperature and 37 °C over two months. The stability of protein drugs in silk films is attributed to intermolecular interactions between the silk and the enzymes, based on Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). The unique structural feature of silk molecules, periodic hydrophobic‐hydrophilic domains, enabled strong interactions with proteins. The entrapped protein was present in two states, untrapped active and trapped inactive forms. The ratio between the two forms varied according to processing conditions. Proteolytic degradation and dissolution of the silk films resulted in the release of the bound enzyme which was otherwise not released by diffusion; enzyme recovered full activity upon release. There was a linear relationship between silk degradation/dissolution and the release of entrapped enzyme. Modifying the secondary structure of the silk matrix and the interactions with the non‐crystalline domains resulted in control of the film degradation or dissolution rate, and therefore the release rate of the entrapped enzyme. Based on the above results, silk materials are an intriguing carrier for proteins in terms of both retention of activity and controllable release kinetics from the films.

     

Adsorption properties of N<Subscript>2</Subscript>O on (6,0), (7,0), (8,0), and Al-doped (6,0) zigzag single-walled carbon nanotubes: a density functional study

Abstract  

The behavior of N₂O adsorbed on the external surface of H-capped (6,0), (7,0), (8,0), and Al-doped (6,0) zigzag single-walled carbon nanotubes was studied by using density functional calculations. Geometry optimizations were carried out at the B3LYP/6-31G* level of theory using the Gaussian 03 suite of programs. We present the nature of the N₂O interaction in selected sites of the nanotubes. Binding energies corresponding to adsorption of the N₂O are calculated to be in the range 4–21 kJ mol⁻¹. More efficient binding energies cannot be achieved by increasing the nanotube diameter. We also provide the effects of N₂O adsorption on the electronic properties of the nanotubes.     

Chemoenzymatic glycan-selective remodeling of a therapeutic lysosomal enzyme with high-affinity M6P-glycan ligands. Enzyme substrate specificity is the name of the game

Functionalization of therapeutic lysosomal enzymes with mannose-6-phosphate (M6P) glycan ligands represents a major strategy for enhancing the cation-independent M6P receptor (CI-MPR)-mediated cellular uptake, thus improving the overall therapeutic efficacy of the enzymes. However, the minimal high-affinity M6P-containing N-glycan ligands remain to be identified and their efficient and site-selective conjugation to therapeutic lysosomal enzymes is a challenging task. We report here the chemical synthesis of truncated M6P-glycan oxazolines and their use for enzymatic glycan remodeling of recombinant human acid α-glucosidase (rhGAA), an enzyme used for treatment of Pompe disease which is a disorder caused by a deficiency of the glycogen-degrading lysosomal enzyme. Structure–activity relationship studies identified M6P tetrasaccharide oxazoline as the minimal substrate for enzymatic transglycosylation yielding high-affinity M6P glycan ligands for the CI-MPR. Taking advantage of the substrate specificity of endoglycosidases Endo-A and Endo-F3, we found that Endo-A and Endo-F3 could efficiently deglycosylate the respective high-mannose and complex type N-glycans in rhGAA and site-selectively transfer the synthetic M6P N-glycan to the deglycosylated rhGAA without product hydrolysis. This discovery enabled a highly efficient one-pot deglycosylation/transglycosylation strategy for site-selective M6P-glycan remodeling of rhGAA to obtain a more homogeneous product. The Endo-A and Endo-F3 remodeled rhGAAs maintained full enzyme activity and demonstrated 6- and 20-fold enhanced binding affinities for CI-MPR receptor, respectively. Using an in vitro cell model system for Pompe disease, we demonstrated that the M6P-glycan remodeled rhGAA greatly outperformed the commercial rhGAA (Lumizyme) and resulted in the reversal of cellular pathology. This study provides a general and efficient method for site-selective M6P-glycan remodeling of recombinant lysosomal enzymes to achieve enhanced M6P receptor binding and cellular uptake, which could lead to improved overall therapeutic efficacy of enzyme replacement therapy.

An efficient one-pot M6P glycan remodeling of a multiply glycosylated lysosomal enzyme (Lumizyme) affords a new glycoengineered protein that shows greatly improved receptor binding, cellular uptake, and degradation of lysosomal glycogen in an in vitro model of Pompe disease.     

A preliminary 3D model for cytochrome P450 2D6 constructed by homology model building

Summary A homology model building study of cytochrome P450 2D6 has been carried out based on the crystal structure of cytochrome P450 101. The primary sequences of P450 101 and P450 2D6 were aligned by making use of an automated alignment procedure. This alignment was adjusted manually by matching -helices (C, D, G, I, J, K and L) and -sheets (3/4) of P450 101 that are proposed to be conserved in membrane-bound P450s (Ouzounis and Melvin [Eur. J. Biochem., 198 (1991) 307]) to the corresponding regions in the primary amino acid sequence of P450 2D6. Furthermore, -helices B, B and F were found to be conserved in P450 2D6. No significant homology between the remaining regions of P450 101 and P450 2D6 could be found and these regions were therefore deleted. A 3D model of P450 2D6 was constructed by copying the coordinates of the residues from the crystal structure of P450 101 to the corresponding residues in P450 2D6. The regions without a significant homology with P450 101 were not incorporated into the model. After energy-minimization of the resulting 3D model of P450 2D6, possible active site residues were identified by fitting the substrates debrisoquine and dextrometorphan into the proposed active site. Both substrates could be positioned into a planar pocket near the heme region formed by residues Val³⁷⁰, Pro³⁷¹, Leu³⁷², Trp³¹⁶, and part of the oxygen binding site of P450 2D6. Furthermore, the carboxylate group of either Asp¹⁰⁰ or Asp³⁰¹ was identified as a possible candidate for the proposed interaction with basic nitrogen atom(s) of the substrates. These findings are in accordance with a recently published predictive model for substrates of P450 2D6 [Koymans et al., Chem. Res. Toxicol., 5 (1992) 211].     

Purification and characterization of cysteine protease from miswak <Emphasis Type="Italic">Salvadora persica</Emphasis>

Background

Generally, proteases in medicinal plants had different therapeutic effects such as anti-inflammatory effect; modulate the immune response and inhibitory effect toward tumor growth. In this study, protease was purified and characterized from miswak roots, as medicinal plant and natural toothbrush.

Results

Physical and chemical characterization of cysteine protease P1 were studied such as pH optimum (6.5), optimum temperature (50?°C), thermal stability (50?°C) and Km (3.3?mg azocasein/ml). The enzyme digested some proteins in the order of caseine > haemoglobin > egg albumin >gelatin > bovine serum albumin. Hg²⁺ had strong inhibitory effect on enzyme activity compared with other metal ions. Kinetic of inhibition for determination the type of protease was studied. Iodoactamide and p-Hydroximercuribenzaoic acid (p-HMB) caused strong inhibitory effect on enzyme activity indicating the enzyme is cysteine protease.

Conclusions

The biochemical characterization of this enzyme will be display the suitable conditions for using of this enzyme in toothpaste in the future and the enzyme may be used in other applications.

     

A DFT study of reactions of methyldiazonium ion with DNA/RNA nucleosides: Investigating effect of sugar moiety on methylation pattern of bases

Methyldiazonium ion ( ) is an ultimate carcinogen that can methylate multiple sites in DNA/RNA. In present contribution, density functional theory calculations using the B3LYP and M06‐2X functionals and the 6‐31G(d,p) and aug‐cc‐pVDZ basis sets are carried out to study methylation reactions of at the different nucleophilic sites of DNA/RNA bases and their nucleosides. Total 12 nucleophilic sites, that is, the N2, N3, N7, and O6 sites of guanine; the N1, N3, N6, and N7 sites of adenine; O2 and N3 sites of cytosine and the O2 and O4 sites of thymine and uracil have been considered for study. Thus, a total of 30 reactions have been studied here. The polarizable continuum model is used for solvation calculations. The N7 site of guanine, N7(G), is found to be most reactive in all the reactions studied here, which is in agreement with experiment. However, the calculated reactivity of toward the N7(G) site in aqueous media follows the order: guanine > deoxyguanosine > guanosine. The reactivities of many other sites including the O6(G), O2(C), and N3(A) sites are also modified in going from DNA/RNA bases to their nucleosides and from DNA to RNA nucleosides. Thus, we note that the presence of sugar moiety significantly modifies the methylation pattern of bases caused by . © 2014 Wiley Periodicals, Inc.     

Fluorometric determination of microRNA based on strand displacement amplification and rolling circle amplification

The authors describe a fluorometric assay for microRNA. It is based on two-step amplification involving (a) strand displacement replication and (b) rolling circle amplification. The strand displacement amplification system is making use of template DNA (containing a sequence that is complementary to microRNA-21) and nicking enzyme sites. After hybridization, the microRNA strand becomes extended by DNA polymerase chain reaction and then cleaved by the nicking enzyme. The DNA thus produced acts as a primer in rolling circle amplification. Then, the DNA probe SYBR Green II is added to bind to ssDNA to generate a fluorescent signal which increases with increasing concentration of microRNA. The method has a wide detection range that covers the10 f. to 0.1 nM microRNA concentration range and has a detection limit as low as 1.0 fM. The method was successfully applied to the determination of microRNA-21 in the serum of healthy and breast cancer patients.

Open image in new window

Graphical abstract Schematic of a fluorometric microRNA assay based on two-step amplification involving strand displacement replication and rolling circle amplification. DNA probe SYBR Green II is then bound to ssDNA to generate a fluorescent signal which increases with increasing concentration of microRNA.

     

Detrimental effect of the 6 His C-terminal tag on YedY enzymatic activity and influence of the TAT signal sequence on YedY synthesis

Background

YedY, a molybdoenzyme belonging to the sulfite oxidase family, is found in most Gram-negative bacteria. It contains a twin-arginine signal sequence that is cleaved after its translocation into the periplasm. Despite a weak reductase activity with substrates such as dimethyl sulfoxide or trimethylamine N-oxide, its natural substrate and its role in the cell remain unknown. Although sequence conservation of the YedY family displays a strictly conserved hydrophobic C-terminal residue, all known studies on Escherichia coli YedY have been performed with an enzyme containing a 6 histidine-tag at the C-terminus which could hamper enzyme activity.

Results

In this study, we demonstrate that the tag fused to the C-terminus of Rhodobacter sphaeroides YedY is detrimental to the enzyme’s reductase activity and results in an eight-fold decrease in catalytic efficiency. Nonetheless this C-terminal tag does not influence the properties of the molybdenum active site, as assayed by EPR spectroscopy. When a cleavable His-tag was fused to the N-terminus of the mature enzyme in the absence of the signal sequence, YedY was expressed and folded with its cofactor. However, when the signal sequence was added upstream of the N-ter tag, the amount of enzyme produced was approximately ten-fold higher.

Conclusion

Our study thus underscores the risk of using a C-terminus tagged enzyme while studying YedY, and presents an alternative strategy to express signal sequence-containing enzymes with an N-terminal tag. It brings new insights into molybdoenzyme maturation in R. sphaeroides showing that for some enzymes, maturation can occur in the absence of the signal sequence but that its presence is required for high expression of active enzyme.