Tube model for the elasticity of entangled nematic rubbers

Dense rubbery networks are highly entangled polymer systems, with significant topological restrictions for the mobility of neighbouring chains and crosslinks preventing the reptation constraint release. In a mean-field approach, entanglements are treated within the famous reptation approach, since they effectively confine each individual chain in a tube-like geometry. We apply these classical ideas to calculate the effective rubber-elastic free energy of anisotropic networks, nematic liquid crystal elastomers, and present the first theory of entanglements for such a material. Received 25 June 2001     

Complex nanostructured materials from segmented copolymers prepared by ATRP

The development of new controlled/living radical polymerization processes, such as Atom Transfer Radical Polymerization (ATRP) and other techniques such as nitroxide mediated polymerization and degenerative transfer processes, including RAFT, opened the way to the use of radical polymerization for the synthesis of well-defined, complex functional nanostructures. The development of such nanostructures is primarily dependent on self-assembly of well-defined segmented copolymers. This article describes the fundamentals of ATRP, relevant to the synthesis of such systems. The self-assembly of block copolymers prepared by ATRP is illustrated by three examples. In the first, block copolymers of poly(butyl acrylate) with polyacrylonitrile phase separate, leading to spherical, cylindrical or lamellar morphologies, depending on the block copolymer composition. At a higher temperature, polyacrylonitrile block converts to nanostructured carbon clusters, whereas poly(butyl acrylate) block serves as a sacrificial block, aiding the development of designed nanostructures. In the second example, conductive nanoribbons of poly(n-hexylthiophene) surrounded by a matrix of organic polymers are formed from block copolymers prepared by ATRP. The third example describes an inorganic-organic hybrid system consisting of hard nanocolloidal silica particles (20 nm) grafted by ATRP with well-defined polystyrene-poly(benzyl acrylate) block copolymer chains (1000 chains per particle). Silica cores in this system are surrounded by a rigid polystyrene inner shell and softer polyacrylate outer shell. Received 9 July 2002 Published online: 11 March 2003     

Some relevant parameters affecting the glass transition of supported ultra-thin polymer films

We have measured, the thickness dependence of the glass transition temperature T(g)( h), using ellipsometry at variable temperature, for poly(methyl-methacrylate) (PMMA) of various tacticity in confined geometry. We report that several factors significantly affect T(g)( h): i) polymer microstructure (stereoregularity of PMMA) related to local dynamics; ii) interfacial interactions; iii) conformation of the polymer chains. These results raise many fundamental questions on the origin of the thickness-dependent glass transition. Why and how do the interactions with the substrate significantly affect T(g)( h)? Does T(g)( h) depend on the modifications of conformational parameters of the chains (their entropy)? What is the correlation between local dynamics and T(g)( h) in thin films? The aim of this paper is to summarise these open questions, which should stimulate further investigations in the thin polymer film scientific community.     

Spontaneous thermal expansion of nematic elastomers

We study the monodomain (single-crystal) nematic elastomer materials, all side-chain siloxane polymers with the same mesogenic groups and crosslinking density, but differing in the type of crosslinking. Increasing the proportion of long di-functional segments of main-chain nematic polymer, acting as network crosslinking, results in dramatic changes in the uniaxial equilibrium thermal expansion on cooling from the isotropic phase. At higher concentration of main chains their behaviour dominates the elastomer properties. At low concentration of main-chain material, we detect two distinct transitions at different temperatures, one attributed to the main-chain, the other to the side-chain component. The effective uniaxial anisotropy of nematic rubber, r(T) = / proportional to the effective nematic order parameter Q(T), is given by an average of the two components and thus reflects the two-transition nature of thermal expansion. The experimental data is compared with the theoretical model of ideal nematic elastomers; applications in high-amplitude thermal actuators are discussed in the end. Received 25 June 2001 and Received in final form 29 September 2001     

Integrable correlated electron model with next-nearest-neighbour interactions

The exactly solvable model of supersymmetric t - J chains (STJC) of correlated electrons with next-nearest-neighbour (NNN) interactions is proposed and studied. The model with interactions between nearest neighbours and NNN interactions in one chain can also be considered as a two-chain model with zigzag-like coupling between the chains. The NNN interaction (coupling between chains) causes the onset of additional Dirac seas for low-lying charge and/or spin excitations. These Dirac seas change the low-energy (conformal) behavior of the model. The filling of those seas depends on the values of the NNN coupling (interactions between chains), external magnetic field and applied voltage. We identify the new ground state phases which appear due to the NNN as incommensurate ones. The NNN coupling in the incommensurate phases induces spontaneous magnetization and/or spontaneous filling of the Dirac sea for charge excitations (“spontaneous charge ordering”). The onset of this order implies a first order quantum phase transition driven by the field with hysteresis phenomena. Received 13 September 2000     

End-chain segment ordering in lamellar sublayers of a diblock copolymer

The segmental ordering within a lamellar polystyrene-polydimethylsiloxane diblock (PS-PDMS) was examined by NMR. A non-uniform stretching of the PDMS chains was evidenced. Although chain segments displaying isotropic reorientational motions are present along the chains, relaxation measurements on the free PDMS extremities demonstrate that these latter are oriented and submitted to a non-zero constraint. This specific result allows to precise some features of the order distribution within the lamellae. Received: 27 March 2003 / Accepted: 9 May 2003 / Published online: 4 June 2003 RID="a" ID="a"e-mail: deloche@lps.u-psud.fr     

New results on elements 111 and 112

Experiments on the synthesis and identification of the nuclei ²⁷²111 and ²⁷⁷112 were performed in order to confirm previous results. Three additional decay chains were measured in the reaction ⁶⁴Ni + ²⁰⁹Bi →²⁷³111^*. The study revealed considerably improved data on the decay chain originating from ²⁷²111. One additional chain was measured in the reaction ⁷⁰Zn + ²⁰⁸Pb →²⁷⁸112^*. The decay properties of the chain starting at ²⁷⁷112 are in excellent agreement with the second chain of the first experiment down to ²⁶⁵Sg, where the new chain ends by a previously unknown spontaneous-fission branch. A re-analysis of all the data on elements 110, 111, and 112 measured at GSI since 1994 (a total of 34 decay chains was investigated) revealed that for 2 chains (the second chain of ²⁶⁹110 measured in 1994 and the first chain of ²⁷⁷112 measured in 1996) the results of the new analysis differed from the previous one. In all other cases the earlier data are exactly reproduced. Received: 21 December 2001 / Accepted: 15 January 2002     

Asymmetric landscapes of early spinodal decomposition

We address the effect of an asymmetric concentration-dependent mobility on the early stages of spinodal decomposition in polymer blends and solutions, and characterise it quantitatively. This is particularly important when one of the components has a slower dynamics than the other, e.g., because it is closer to its glass transition, or is weakly cross-linked. Composition mode coupling is proposed as the underlying physical mechanism, and then investigated by means of numerical simulations of the Cahn-Hilliard equation in one (1d) and two (2d) dimensions. In general, this coupling broadens the peak in the structure factor: in 1d an asymmetric concentration profile is obtained, with sharpened interfaces, whereas in 2d the formation is favoured of sharp peaks of the phase rich in the more mobile component. It is shown how the changing morphology of this phase-separating system can be described with the aid of Minkowski functionals. Received 28 August 2000 and Received in final form 18 July 2001     

Phase separation of polymer blends in solution near adsorbing surface

In this paper, we consider a mixture of two polymers A and B of different chemical nature, dissolved in a common good solvent, in contact with an interacting surface. We start from a mixture of two incompatible homopolymers A and B in the molten state, and assume that the surface adsorbs strongly one or both polymer species at high temperature. It is assumed that this is a strong adsorption, so that chains cannot desorb once they are linked to the surface. This constrains the system to a quenched composition on the surface. Once the adsorption process is finished, a quantity of a good solvent is added to get a semi-dilute solution. We assume that demixing transition in the presence of solvent occurs at lower temperature. The purpose is to discuss the influence of the quenched surface fluctuations on the critical properties of the mixture. Within the framework of the so-called blob model, we determine the exact shape of the composition profile as a function of the distance z to the surface, for any value of the relevant parameters, namely, the temperature T, the molecular weight M, the monomer concentration c and the surface composition x₀. Our analysis reveals a universal character of the composition profile for , where the characteristic size D is some known length depending on the relevant parameters of the problem, and not on temperature, and is the thermal correlation length. Near surface, for (a is the monomer size), the profile is no longer universal, and in particular, it is sensitive to the boundary condition. Far from the surface, that is , the profile tends exponentially to its bulk value. We show that the length Dapproaches its lowest value as the surface composition reaches its saturated value l. In this limit, we find that the profile shape is a characteristic of critical adsorption in simple binary fluid mixtures. Finally, this work must be regarded as a natural extension of a previous one, which was concerned with the same problem, but in the absence of solvent. Received 24 June 1999 and Received in final form 5 November 1999     

Helix coil mixing in twist-storing polymers

Twist-storing polymers respond with elastic energy penalty to coherent or random twisting along the local chain axis away from its equilibrium, which can be straight (as in “ribbons”) or helical (as in DNA and other biopolymers). Here we study the equilibrium conformation of such polymers, focusing on the thermodynamic balance between twist and writhe, resulting from the competition between the random coil entropy and the potential energy stored in superhelical portions of the polymer chain. Two macroscopic variables characterise such a chain, the end-to-end distance R and the link number Lk, which is a topological invariant of a given polymer with clamped ends. We find that with increasing link number Lk, the chain accommodates its excess twist in growing plectonemes, unless forced out of this state by stretching its end-to-end distance R. We calculate the force-extension relation, which exhibits crossovers between different deformation regimes. Received 16 November 2000 and Received in final form 6 February 2001     

Morphologies of diblock copolymer thin films before and after crystallization

Spin-coated thin films of about 100nm of low-molecular-weight hydrogenated poly(butadiene-b- ethyleneoxide) (PB_h-PEO) diblock copolymers have been crystallized at various constant temperatures. Crystallization has been observed in real time by light microscopy. Detailed structural information was obtained by atomic force microscopy, mainly enabled by the large viscoelastic contrast between amorphous and crystalline regions. The behavior in thin films is compared to the bulk properties of the polymer. Crystallization started from an annealed microphase separated melt where optical microscopy indicated a lamellar orientation parallel to the substrate. A small difference in the length of the crystallizable block produced significantly different crystallization behavior, both in the bulk and in thin films. For thin films of the shortest diblock copolymer (45% PEO content) and for an undercooling larger than about 10 degrees, crystallization created vertically oriented lamellae. These vertical lamellae could be preferentially aligned over several micrometers when crystallization occurred close to a three-phase contact line. Annealing at temperatures closer to the melting point or keeping the sample at room temperature for several months allowed the formation of a lamellar structure parallel to the substrate. A tentative interpretation based on kinetically caused chain folding and relaxation within the crystalline state, with implications on general aspects of polymer crystallization, is presented. Received 19 March 1999 and Received in final form 14 December 1999     

Partitioning of a heterotelechelic polystyrene to separate interfaces of thin films

Heterotelechelic deuteropolystyrenes have been synthesised with a tertiary amine functionality at one end and a fluorocarbon group at the other end of the polymer chain. A layer of this polymer, circa 120 ? thick, has been attached to the surface of a silicon substrate and subsequently covered with a much thicker layer of hydrogenous polystyrene. The combination has then been annealed at 413 K under vacuum for defined times and the subsequent distribution of the deutero heterotelechelic polymer determined using nuclear reaction analysis and neutron reflectometry. The influences of annealing time, molecular weight and thickness of the hydrogenous polymer have been examined. Nuclear reaction analysis showed that an excess of the heterotelechelic polymer formed at both interfaces with a larger excess remaining at the substrate-polymer interface. When the molecular weight of the hydrogenous polymer is lower than that of the deuteropolymer, the deutero layer is initially swollen by the hydrogenous polymer but the thickness then decreases as deutero polymer becomes detached from the silicon substrate and an additional excess layer is eventually formed at the vacuum-polymer surface. When the molecular weight of the hydrogenous polymer is higher, there is an initial shrinkage of the deuteropolymer layer, but the original thickness (∼ radius of gyration of the deuteropolymer) is regained on prolonged annealing. There is no evidence for bridging between the two interfaces by the heterotelechelic polymer. After five days annealing the volume fraction distribution of the deuteropolymer at the silicon substrate was well described by a self-consistent field model where the only adjustable parameter was the sticking energy of the tertiary amine group to the silicon substrate for which a value of 8k _B T was obtained. Comparison of the dependence of the equilibrium layer thickness of the deuteropolymer on the equilibrium grafting density at the silicon surface with the predictions of scaling theory for brush-like polymer layers suggested that the grafted molecules were in the ideal, unperturbed brush region. Received 12 October 2000 and Received in final form 27 March 2001     

The mechanisms of recrystallization after melting in syndiotactic polypropylene and isotactic polystyrene

Several semicrystalline polymers show a recrystallization after melting during a heating scan. We have studied the mechanisms of such recrystallization processes for two different polymers, namely syndiotactic polypropylene (sPP) and isotactic polystyrene (iPS). This was done by monitoring the structure evolution during the recrystallization process and its changes during a subsequent heating scan via time- and temperature-dependent SAXS measurements, respectively. The results of this study showed that the sPP samples exhibited a recrystallization mechanism similar to the multi-stage route found upon initial crystallization of semicrystalline polymers from an entangled melt. Meanwhile, a different recrystallization mechanism was shown by the iPS samples. In this case, the recrystallization process proceeded as a direct growth into the melt in a one-step process. This is the first time we have observed such a mechanism which resembles the picture presented by the classical models for crystallization from an entangled polymer melt. The reason for such different mechanisms may be related to the initial melt state prior to crystallization. It seems as though, when crystallization sets in an entangled polymer melt, it follows the multi-stage route, whereas if the melt is locally disentangled, it proceeds by a direct growth mechanism. Received 23 July 2001 and Received in final form 4 October 2001     

Oppositely charged polyelectrolytes grafted onto planar surface: Mean-field lattice theory

Equilibrium structures of planar polyelectrolyte brushes formed by grafted chains carrying charges of opposite sign are examined by employing mean-field lattice theory. Two brushes of different architecture are considered: one formed by grafted diblock copolymers with oppositely charged blocks and the other being a mixed brush composed of oppositely charged homopolymers. The systems display nontrivial intrinsically inhomogeneous brush structures originating from the chain connectivity and the electrostatic interaction among the segments. In addition, a coexistence of stretched and coiled chains inside the brush is observed. The influence of the charges of the blocks, the relative length of the oppositely charged blocks, and the ionic strength of the solution on the brush inhomogeneity and structural differences between the two types of brushes are discussed. Received 14 March 2001 and Received in final form 18 June 2001     

Adsorption of a random heteropolymer with random self-interactions onto an interface

We consider the adsorption of a random heteropolymer onto an interface within the model of Garel et al. [#!gareletal89!#] by taking into account random self-interactions and ternary repulsive interactions between the monomers. Within the replica trick and by using a self-consistent preaveraging procedure we map the adsorption problem onto the problem of binding state of a quantum mechanical Hamiltonian. The analysis of the latter is treated within the variational method based on the 2nd Legendre transform. Our study reveals a complex behaviour of the localization of the heteropolymer. In particular, we predict a reentrant localization transition for moderate values of the asymmetry of the distribution function of the monomer sequences along the heteropolymer. Received 9 October 2001 and Received in final form 27 February 2002 Published online 6 June 2002     

Collapse of sodium polyacrylate chains in calcium salt solutions

The sodium salt of polyacrylic acid (NaPA) precipitates in the presence of Ca²⁺-ions. This phase behaviour can be represented by a phase diagram where the critical NaPA concentration is plotted versus the critical Ca²⁺ concentration resulting in a straight line as a phase boundary. The location of this phase boundary is influenced by the presence of an inert monovalent salt like NaCl. The present contribution focuses on the coil dimensions of NaPA chains in dilute aqueous solution corresponding to the one phase region of such a phase diagram. A variety of parameters with which the size and shape of the polyelectrolyte chains can be modulated are revealed. Approaching the phase boundary by decreasing the NaPA concentration at a constant Ca²⁺ content leads to a collapse of the NaPA chains. Combined static and dynamic light scattering suggests a compact spherical shape as the final state of this transition, both in 0.1 M NaCl and in 0.01 M NaCl. In the lower NaCl concentration, indication is presented for the existence of a cigar or pearl necklace like intermediate. Most strikingly, the collapsed chains can be reexpanded by increasing the concentration of inert NaCl at constant content of NaPA and Ca²⁺. Clearly, excessive Na⁺-ions displace the Ca²⁺-ions from the NaPA chains. Received 18 July 2000 and Received in final form 24 August 2000     

Elastic rod model of a supercoiled DNA molecule

We study the elastic behaviour of a supercoiled DNA molecule. The simplest model is that of a rod-like chain, involving two elastic constants, the bending and the twist rigidities. Writing this model in terms of Euler angles, we show that the corresponding Hamiltonian is singular and needs a small distance cut-off, which is a natural length scale giving the limit of validity of the model, of the order of the double-helix pitch. The rod-like chain in the presence of the cut-off is able to reproduce quantitatively the experimentally observed effects of supercoiling on the elongation-force characteristics, in the small supercoiling regime. An exact solution of the model, using both transfer matrix techniques and its mapping to a quantum mechanics problem, allows to extract, from the experimental data, the value of the twist rigidity. We also analyse the variation of the torque and the writhe-to-twist ratio versus supercoiling, showing analytically the existence of a rather sharp crossover regime which can be related to the excitation of plectoneme-like structures. Finally we study the extension fluctuations of a stretched and supercoiled DNA molecule, both at fixed torque and at fixed supercoiling angle, and we compare the theoretical predictions to some preliminary experimental data. Received 1 April 1999 and Received in final form 4 January 2000     

Polymers grafted to a fluid and flexible membrane: Extreme sensitivity to the grafting density

Equilibrium phase coexistence between two chemical species implies the equality of the chemical potentials and of the osmotic pressures. We study this problem on a deformable membrane when one type of the molecules serves as anchor for polymeric chains immersed in the surrounding medium (considered as a good solvent). We derive the general conditions for phase coexistence when both the curvature of the membrane and the density field of the anchor molecule are free to adjust themselves. We show that curvature favors phase segregation. Our model predicts that membranes decorated with polymeric chains exhibit new shape bifurcations without equivalent in fixed density systems. Received: 26 November 2002 / Accepted: 2 April 2003 / Published online: 12 May 2003 RID="a" ID="a"e-mail: nicolas@drfmc.ceng.cea.fr RID="b" ID="b"e-mail: bfourcade@cea.fr     

Structures and energetics of carbon bridged C 60 clusters

The structures and energetics of carbon bridged C₆₀ clusters (C ₆₀ ) _n C_m have been studied by simulated annealing technique within the tight-binding molecular-dynamics. The “sp² addition” ball-and-chain dimers exhibit odd-even alternations over the number of chain atoms, with the dimers containing even chain atoms more stable against dissociation than their immediate neighbors containing odd chain atoms. In addition to the usual “sp² addition” dimers, a pentagon-linked C₁₂₁ isomer and a hexagon-linked C₁₂₂ isomer are also found to be stable. Based on our tight-binding calculations, trimers and larger clusters can be simply regarded as being made up of independent or weakly interacting dimers, if the C-C₆₀ joints on a single cage are not too close to each other. Large C₆₀ clusters connected by chains each containing only one or two carbon atoms have similar stability to that of constituent dimers, indicating the possibility to form stable C₆₀-carbon polymers. Received 17 January 2001 and Received in final form 26 February 2001     

Melting and unzipping of DNA

Existing experimental studies of the thermal denaturation of DNA yield sharp steps in the melting curve suggesting that the melting transition is first order. This transition has been theoretically studied since the early sixties, mostly within an approach in which the microscopic configurations of a DNA molecule consist of an alternating sequence of non-interacting bound segments and denaturated loops. Studies of these models neglect the repulsive, self-avoiding, interaction between different loops and segments and have invariably yielded continuous denaturation transitions. In the present study we take into account in an approximate way the excluded-volume interaction between denaturated loops and the rest of the chain. This is done by exploiting recent results on scaling properties of polymer networks of arbitrary topology. We also ignore the heterogeneity of the polymer. We obtain a first-order melting transition in d = 2 dimensions and above, consistent with the experimental results. We also consider within our approach the unzipping transition, which takes place when the two DNA strands are pulled apart by an external force acting on one end. We find that the under equilibrium condition the unzipping transition is also first order. Although the denaturation and unzipping transitions are thermodynamically first order, they do exhibit critical fluctuations in some of their properties. For instance, the loop size distribution decays algebraically at the transition and the length of the denaturated end segment diverges as the transition is approached. We evaluate these critical properties within our approach. Received 21 August 2001 and Received in final form 26 January 2002