Formation of Ammonia from an Iron Nitrido Complex

Radical ideas : Reaction of the iron(IV) nitrido complex [PhB(MesIm)₃Fe?N] (see picture, Mes=2,4,6‐Me₃C₆H₂) with TEMPO‐H (1‐hydroxy‐2,2,6,6‐tetramethylpiperidine) results in high yields of ammonia and quantitative formation of [PhB(MesIm)₃Fe(tempo)]. The mechanism likely involves hydrogen‐atom transfer from TEMPO‐H to the nitrido complex. Similar reaction with the triphenylmethyl radical yields [PhB(MesIm)₃Fe?N? CPh₃].

     

Spin crossover in a four-coordinate iron(II) complex

The four-coordinate iron(II) phosphoraniminato complex PhB(MesIm)(3)Fe-N═PPh(3) undergoes an S = 0 to S = 2 spin transition with T(C) = 81 K, as determined by variable-temperature magnetic measurements and Mo?ssbauer spectroscopy. Variable-temperature single-crystal X-ray diffraction revealed that the S = 0 to S = 2 transition is associated with an increase in the Fe-C and Fe-N bond distances and a decrease in the N-P bond distance. These structural changes have been interpreted in terms of electronic structure theory.     

Styrene Aziridination by Iron(IV) Nitrides

Thermolysis of the iron(IV) nitride complex [PhB(tBuIm)₃Fe?N] with styrene leads to formation of the high‐spin iron(II) aziridino complex [PhB(tBuIm)₃Fe‐N(CH₂CHPh)]. Similar aziridination occurs with both electron‐rich and electron‐poor styrenes, while bulky styrenes hinder the reaction. The aziridino complex [PhB(tBuIm)₃Fe‐N(CH₂CHPh)] acts as a nitride synthon, reacting with electron‐poor styrenes to generate their corresponding aziridino complexes, that is, aziridine cross‐metathesis. Reaction of [PhB(tBuIm)₃Fe‐N(CH₂CHPh)] with Me₃SiCl releases the N‐functionalized aziridine Me₃SiN(CH₂CHPh) while simultaneously generating [PhB(tBuIm)₃FeCl]. This closes a synthetic cycle for styrene azirdination by a nitride complex. While the less hindered iron(IV) nitride complex [PhB(MesIm)₃Fe?N] reacts with styrenes below room temperature, only bulky styrenes lead to tractable aziridino products.     

Oxo iron(IV) as an oxidative active intermediate of p-chlorophenol in the Fenton reaction: a DFT study

Debate continues over which active species plays the role of oxidative agent during the Fenton reaction-the HO˙ radical or oxo iron [Fe(IV)O](2+). In this context, the present study investigates the oxidation of p-chlorophenol by [Fe(IV)O(H(2)O)(5)](2+) using DFT calculations, within gas-phase and micro-solvated models, in order to explore the possible role of oxo iron as a reactant. The results show that the chlorine atom substitution of p-chlorophenol by oxo iron is a highly stabilising step (ΔH = -83 kcal mol(-1)) with a free energy barrier of 5.8 kcal mol(-1) in the micro-solvated model. This illustrates the high oxidising power of the [Fe(IV)O(H(2)O)(5)](2+) complex. On the other hand, the breaking of the Fe-O bond, leading to the formation of hydroquinone, is observed to be the rate-determining step of the reaction. The rather large free energy barrier corresponding to this bond cleavage amounts to 10.2 and 9.3 kcal mol(-1) in the gas-phase and micro-solvated models, respectively. Elsewhere, the lifetime of the HO˙ radical has previously been shown to be extremely small. These facts, combined with observations of oxo iron under certain experimental conditions, suggest that oxo iron is a highly plausible oxidative species of the reaction. In addition, a trigonal bipyramidal iron complex, coordinated either by hydroxyl groups and/or by water molecules, has been found in all described mechanisms. This structure appears to be a stable intermediate; and to our knowledge, it has not been characterised by previous studies.     

Dioxygen activation and catalytic aerobic oxidation by a mononuclear nonheme iron(II) complex

We have used dioxygen, not artificial oxidants such as peracids, iodosylarenes, and hydroperoxides, in the generation of a mononuclear nonheme oxoiron(IV) complex, [Fe(IV)(TMC)(O)]2+ (TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), from its corresponding Fe(II) complex, [Fe(TMC)(CF3SO3)2]. The formation of oxoiron(IV) species by activating dioxygen was markedly dependent on iron(II) complexes and solvents, and this observation was interpreted with the electronic effect of iron(II) complexes on dioxygen activation to form oxoiron(IV) species. A catalytic aerobic oxidation of organic substrates was demonstrated in the presence of the [Fe(TMC)]2+ complex. By carrying out 18O-labeled water experiment, we were able to conclude that the oxidation of organic substrates was mediated by an oxoiron(IV) intermediate, not by a radical type of autoxidation process.     

Iron(III) [bond] Salen complexes as enzyme models: mechanistic study of oxo(salen)iron complexes oxygenation of organic sulfides

The oxidation of a series of para-substituted phenyl methyl sulfides was carried out with several oxo(salen)iron (salen = N,N'-bis(salicylidine)ethylenediaminato) complexes in acetonitrile. The oxo complex [O=Fe(IV)(salen)](*+), generated from an iron(III) [bond] salen complex and iodosylbenzene, effectively oxidizes the organic sulfides to the corresponding sulfoxides. The formation of [O [double bond] Fe(IV)(salen)](*+) as the active oxidant is supported by resonance Raman studies. The kinetic data indicate that the reaction is first-order in the oxidant and fractional-order with respect to sulfide. The observed saturation kinetics of the reaction and spectral data indicate that the substrate binds to the oxidant before the rate-controlling step. The rate constant (k) values for the product formation step determined using Michaelis-Menten kinetics correlate well with Hammett sigma constants, giving reaction constant (rho) values in the range of -0.65 to -1.54 for different oxo(salen)iron complexes. The log k values observed in the oxidation of each aryl methyl sulfide by substituted oxo(salen)iron complexes also correlate with Hammett sigma constants, giving positive rho values. The substituent effect, UV-vis absorption, and EPR spectral studies indicate oxygen atom transfer from the oxidant to the substrate in the rate-determining step.     

Ligand substitution kinetics of the iron(III) hydroxo dimer with simple inorganic ligands

The kinetics and mechanisms of ligand substitution reactions of the iron(III) hydroxo dimer, Fe(2)(mu-OH)(2)(H(2)O)(8)(4+), with various inorganic ligands were studied by the stopped-flow method at 10.0 or 25.0 C in 1.0 M NaClO(4). The transient formation of the following di- and tetranuclear complexes was confirmed: Fe(2)(OH)SO(4)(3+), Fe(2)(OH)H(2)PO(2)(4+), Fe(2)(OH)HPO(3)(3+), Fe(2)(OH)SeO(3)(3+), and Fe(4)(AsO(4))(OH)(2)(7+). The catalytic effect of arsenic(III) on the hydrolytic reaction of iron(III) was also attributed to the formation of a dinuclear complex at very low concentration levels. Fast formation and subsequent dissociation of the multinuclear species into the corresponding mononuclear complexes (FeL) proceed via parallel reaction paths which, in general, show composite pH dependencies. The appropriate rate laws were established. The reactions of the different ligands occur at very similar rates, though the uninegatively charged singly deprotonated form reacts about 1 order of magnitude faster than the neutral form of the same ligand. The results can conveniently be interpreted in terms of a dissociative interchange mechanism which postulates the formation of an intermediate complex in which the ligand is coordinated to only one Fe(III) center of the hydroxo dimer. In a subsequent fast step, the ligand forms a bridge between the two metal ions by replacing one of the OH groups. The dissociation of the dinuclear complex into FeL most likely proceeds via the same intermediate.     

Ground-state singlet L3Fe-(mu-N)-FeL3 and L3Fe(NR) complexes featuring pseudotetrahedral Fe(II) centers

Pseudotetrahedral iron(II) coordination complexes that contain bridged nitride and terminal imide linkages, and exhibit singlet ground-state electronic configurations, are described. Sodium amalgam reduction of the ferromagnetically coupled dimer, {[PhBP(3)]Fe(mu-1,3-N(3))}(2) (2) ([PhBP(3)] = [PhB(CH(2)PPh(2))(3)](-)), yields the diamagnetic bridging nitride species [{[PhBP(3)]Fe}(2)(mu-N)][Na(THF)(5)] (3). The Fe-N-Fe linkage featured in the anion of 3 exhibits an unusually bent angle of approximately 135 degrees , and the short Fe-N bond distances (Fe-N(av) approximately equal to 1.70 A) suggest substantial Fe-N multiple bond character. The diamagnetic imide complex {[PhBP(3)]Fe(II)(triple bond)N(1-Ad)}{(n)()Bu(4)N} (4) has been prepared by sodium amalgam reduction of its low-spin iron(III) precursor, [PhBP(3)]Fe(III)(triple bond)N(1-Ad) (5). Complexes 4 and 5 have been structurally characterized, and their respective electronic structures are discussed in the context of a supporting DFT calculation. Diamagnetic 4 provides a bona fide example of a pseudotetrahedral iron(II) center in a low-spin ground-state configuration. Comparative optical data strongly suggest that dinuclear 3 is best described as containing two high-spin iron(II) centers that are strongly antiferromagnetically coupled to give rise to a singlet ground-state at room temperature.     

Mononitrosyl tris(thiolate) iron complex [Fe(NO)(SPh)3]- and dinitrosyl iron complex [(EtS)2Fe(NO)2]-: formation pathway of dinitrosyl iron complexes (DNICs) from nitrosylation of biomimetic rubredoxin [Fe(SR)4]2-/1- (R = Ph, Et)

Nitrosylation of the biomimetic reduced- and oxidized-form rubredoxin [Fe(SR)4]2-/1- (R = Ph, Et) in a 1:1 stoichiometry led to the formation of the extremely air- and light-sensitive mononitrosyl tris(thiolate) iron complexes (MNICs) [Fe(NO)(SR)3]- along with byproducts [SR]- or (RS)2. Transformation of [Fe(NO)(SR)3]- into dinitrosyl iron complexes (DNICs) [(RS)2Fe(NO)2]- and Roussin's red ester [Fe2(mu-SR)2(NO)4] occurs rapidly under addition of 1 equiv of NO(g) and [NO]+, respectively. Obviously, the mononitrosyl tris(thiolate) complex [Fe(NO)(SR)3]- acts as an intermediate when the biomimetic oxidized- and reduced-form rubredoxin [Fe(SR)4]2-/1- exposed to NO(g) were modified to form dinitrosyl iron complexes [(RS)2Fe(NO)2]-. Presumably, NO binding to the electron-deficient [Fe(III)(SR)4]- and [Fe(III)(NO)(SR)3]- complexes triggers reductive elimination of dialkyl/diphenyl disulfide, while binding of NO radical to the reduced-form [Fe(II)(SR)4]2- induces the thiolate-ligand elimination. Protonation of [Fe(NO)(SEt)3]- yielding [Fe(NO)(SPh)3]- by adding 3 equiv of thiophenol and transformation of [Fe(NO)(SPh)3]- to [Fe(NO)(SEt)3]- in the presence of 3 equiv of [SEt]-, respectively, demonstrated that complexes [Fe(NO)(SPh)3]- and [Fe(NO)(SEt)3]- are chemically interconvertible. Mononitrosyl tris(thiolate) iron complex [Fe(NO)(SPh)3]- and dinitrosyl iron complex [(EtS)2Fe(NO)2]- were isolated and characterized by X-ray diffraction. The mean NO bond distances of 1.181(7) A (or 1.191(7) A) in complex [(EtS)2Fe(NO)2]- are nearly at the upper end of the 1.178(3)-1.160(6) A for the anionic {Fe(NO)2}9 DNICs, while the mean FeN(O) distances of 1.674(6) A (or 1.679(6) A) exactly fall in the range of 1.695(3)-1.661(4) A for the anionic {Fe(NO)2}9 DNICs.     

Olefin cis-dihydroxylation with bio-inspired iron catalysts. evidence for an Fe(II)/Fe(IV) catalytic cycle

Iron(II) complexes of a series of N-acylated dipyridin-2-ylmethylamine ligands (R-DPAH) have been investigated as catalysts for the cis-dihydroxylation of olefins to model the action of Rieske dioxygenases that catalyze arene cis-dihydroxylation. The Rieske dioxygenases have a mononuclear iron active site coordinated to a 2-histidine-1-carboxylate facial triad motif. The R-DPAH ligands are designed to provide a facial N,N,O-ligand set that mimics the enzyme active site. The iron(II) complexes of the R-DPAH ligands activate H(2)O(2) to effect the oxidation of olefin substrates into cis-diol products. As much as 90% of the H(2)O(2) oxidant is converted into cis-diol, but a large excess of olefin is required to achieve the high conversion efficiency. Reactivity and mechanistic comparisons with the previously characterized Fe(TPA)/H(2)O(2) catalyst/oxidant combination (TPA = tris(pyridin-2-ylmethyl)amine) lead us to postulate an Fe(II)/Fe(IV) redox cycle for the Fe(R-DPAH) catalysts in which an Fe(IV)(OH)(2) oxidant carries out the cis-hydroxylation of olefins. This hypothesis is supported by three sets of observations: (a) the absence of a lag phase in the conversion of the H(2)O(2) oxidant into a cis-diol product, thereby excluding the prior oxidation of the Fe(II) catalyst to an Fe(III) derivative as established for the Fe(TPA) catalyst; (b) the incorporation of H(2)(18)O into the cis-diol product, thereby requiring O-O bond cleavage to occur prior to cis-diol formation; and (c) the formation of cis-diol as the major product of cyclohexene oxidation, rather than the epoxide or allylic alcohol products more commonly observed in metal-catalyzed oxidations of cyclohexene, implicating an oxidant less prone to oxo transfer or H-atom abstraction.     

O2 activation by bis(imino)pyridine iron(II)-thiolate complexes

The new iron(II)-thiolate complexes [((iPr)BIP)Fe(II)(SPh)(Cl)] (1) and [((iPr)BIP)Fe(II)(SPh)(OTf)] (2) [BIP = bis(imino)pyridine] were prepared as models for cysteine dioxygenase (CDO), which converts Cys to Cys-SO(2)H at a (His)(3)Fe(II) center. Reaction of 1 and 2 with O(2) leads to Fe-oxygenation and S-oxygenation, respectively. For 1 + O(2), the spectroscopic and reactivity data, including (18)O isotope studies, are consistent with an assignment of an iron(IV)-oxo complex, [((iPr)BIP)Fe(IV)(O)(Cl)](+) (3), as the product of oxygenation. In contrast, 2 + O(2) results in direct S-oxygenation to give a sulfonato product, PhSO(3)(-). The positioning of the thiolate ligand in 1 versus 2 appears to play a critical role in determining the outcome of O(2) activation. The thiolate ligands in 1 and 2 are essential for O(2) reactivity and exhibit an important influence over the Fe(III)/Fe(II) redox potential.     

Metamagnetism and single-chain magnetic behavior in a homospin one-dimensional iron(II) coordination polymer

Reaction of FeCl(2)·4H(2)O with KNCSe and pyridine in ethanol leads to the formation of the discrete complex [Fe(NCSe)(2)(pyridine)(4)] (1) in which the Fe(II) cations are coordinated by two N-terminal-bonded selenocyanato anions and four pyridine co-ligands. Thermal treatment of compound 1 enforces the removal of half of the co-ligands leading to the formation of a ligand-deficient (lacking on neutral co-ligands) intermediate of composition [Fe(NCSe)(2)(pyridine)(2)](n) (2) to which we have found no access in the liquid phase. Compound 2 is obtained only as a microcrystalline powder, but it is isotypic to [Cd(NCSe)(2)(pyridine)(2)](n) and therefore, its structure was determined by Rietveld refinement. In its crystal structure the metal cations are coordinated by two pyridine ligands and four selenocyanato anions and are linked into chains by μ-1,3 bridging anionic ligands. Magnetic measurements on compound 1 show only paramagnetic behavior, whereas for compound 2 an unexpected magnetic behavior is found, which to the best of our knowledge was never observed before for a iron(II) homospin compound. In this compound metamagnetism and single-chain magnetic behavior coexist. The metamagnetic transition between the antiferromagnetically ordered phase and a field-induced ferromagnetic phase of the high-spin iron(II) spin carriers is observed at a transition field H(C) of 1300 Oe and the single-chain magnetic behavior is characterized by a blocking temperature T(B), estimated to be about 5 K.     

Biomimetic hydrocarbon oxidation catalyzed by nonheme iron(III) complexes with peracids: evidence for an Fe(V)=O species

Mononuclear nonheme iron(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Fe(Me(2)bpb)Cl(H(2)O)] (3 a) and [Fe(bpc)Cl(H(2)O)] (4 a), were prepared by substitution reactions involving the previously synthesized iron(III) complexes [Et(3)NH][Fe(Me(2)bpb)Cl(2)] (3) and [Et(3)NH][Fe(bpc)Cl(2)] (4). Complexes 3 a and 4 a were characterized by IR and elemental analysis, and complex 3 a also by X-ray crystallography. Nonheme iron(III) complexes 3, 3 a, 4, and 4 a catalyze olefin epoxidation and alcohol oxidation on treatment with m-chloroperbenzoic acid. Pairwise comparisons of the reactivity of these complexes revealed that the nature of the axial ligand (Cl(-) versus H(2)O) influences the yield of oxidation products, whereas an electronic change in the supporting chelate ligand has little effect. Hydrocarbon oxidation by these catalysts was proposed to involve an iron(V) oxo species which is formed on heterolytic O-O bond cleavage of an iron acylperoxo intermediate (FeOOC(O)R). Evidence for this iron(V) oxo species was derived from KIE (k(H)/k(D)) values, H(2) (18)O exchange experiments, and the use of peroxyphenylacetic acid (PPAA) as the peracid. Our results suggest that an Fe(V)=O moiety can form in a system wherein the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors. This work is relevant to the chemistry of mononuclear nonheme iron enzymes that are proposed to oxidize organic substrates via reaction pathways involving high-valent iron oxo species.     

First-principle computation of zero-field splittings: application to a high valent Fe(IV)-oxo model of nonheme iron proteins

We report the computational implementation of a combined spin-density-functional theory and perturbation theory (SDFT-PT) methodology for the accurate calculation of zero-field splittings (ZFS) in complexes of the most diverse nature including metal centers in proteins. We have applied the SDFT-PT methodology to study the cation of the recently synthesized complex [Fe(IV)(O)-(TMC)(NCCH(3))](OTf)(2), [J. Rohde et al., Science 299, 1037 (2003)] which is an important structural and functional analog of high-valent intermediates in catalytic cycles of nonheme iron enzymes. The calculated value (D(Theory)=28.67 cm(-1)) is in excellent agreement with the unusually large ZFS reported by experiment (D(Exp)=29+/-3 cm(-1)). The principal component D(zz) of the ZFS tensor is oriented along the Fe(IV)=oxo bond indicating that the oxo ligand dominates the electronic structure of the complex.     

High-spin and low-spin iron(II) complexes with facially-coordinated borohydride ligands

Rare examples of monometallic high-spin and low-spin L3Fe(H3BH) complexes have been characterized, where the two L3 ligands are [TpPh2] and [PhBP3] ([TpPh2] = [HB(3,5-Ph2pz)3]- and [PhBP3] = [PhB(CH2PPh2)3]-). The structures are reported wherein the borohydride ligand is facially coordinated to the iron center in each complex. Density functional methods have been employed to explain the bonding in these unusual iron(II) centers. Despite the differences in spin states, short Fe-B distances are observed in both complexes and there is significant theoretical evidence to support a substantial bonding interaction between the iron and boron nuclei. In light of this interaction, we suggest that these complexes can be described as (L3)Fe(eta4-H3BH) complexes.     

Addition of dioxygen to an N4S(thiolate) iron(II) cysteine dioxygenase model gives a structurally characterized sulfinato-iron(II) complex

The non-heme iron enzyme cysteine dioxygenase (CDO) catalyzes the S-oxygenation of cysteine by O(2) to give cysteine sulfinic acid. The synthesis of a new structural and functional model of the cysteine-bound CDO active site, [Fe(II)(N3PyS)(CH(3)CN)]BF(4) (1) is reported. This complex was prepared with a new facially chelating 4N/1S(thiolate) pentadentate ligand. The reaction of 1 with O(2) resulted in oxygenation of the thiolate donor to afford the doubly oxygenated sulfinate product [Fe(II)(N3PySO(2))(NCS)] (2), which was crystallographically characterized. The thiolate donor provided by the new N3PyS ligand has a dramatic influence on the redox potential and O(2) reactivity of this Fe(II) model complex.     

mer-[Fe III(bpca)(CN)3]-: a new low-spin iron(III) complex to build heterometallic ladder-like chains

The novel mononuclear complex PPh(4)-mer-[Fe(III)(bpca)(3)(CN)(3)].H(2)O (1) [PPh(4)(+) = tetraphenylphosphonium cation and bpca = bis(2-pyridylcarbonyl)amidate anion] and ladder-like chain compound [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)] [Fe(III)(bpca)(CN)(3)]].3H(2)O (2) have been prepared and characterized by X-ray diffraction analysis. Compound 1 is a low-spin iron(III) compound with three cyanide ligands in mer arrangement and a tridentate N-donor ligand building a distorted octahedral environment around the iron atom. Compound 2 is an ionic salt made up of cationic ladder-like chains [[Fe(III)(bpca)(micro-CN)(3)Mn(II)(H(2)O)(3)]](+) and uncoordinated anions [Fe(III)(bpca)(3)(CN)(3)](-). The magnetic properties of 2 correspond to those of a ferrimagnetic chain with significant intrachain antiferromagnetic coupling between the low-spin iron(III) centers and the high-spin manganese(II) cations. This compound exhibits ferrimagnetic ordering below 2.0 K.     

Facile ring opening of iron(III) and iron(II) complexes of meso-amino-octaethylporphyrin by dioxygen

Pyridine solutions of ClFe(III)(meso-NH(2)-OEP) undergo oxidative ring opening when exposed to dioxygen. The high-spin iron(III) complex, ClFe(III)(meso-NH(2)-OEP), has been isolated and characterized by X-ray crystallography. In the solid state, it has a five-coordinate structure typical for high-spin (S = 5/2) iron(III) complex. In chloroform-d solution, ClFe(III)(meso-NH(2)-OEP) displays an (1)H NMR spectrum characteristic of a high-spin, five-coordinate complex and is unreactive toward dioxygen. However, in pyridine-d(5) solution a temperature-dependent equilibrium exists between the high-spin (S = 5/2), six-coordinate complex, [(py)ClFe(III)(meso-NH(2)-OEP)], and the six-coordinate, low spin (S = 1/2 with the less common (d(xz)d(yz))(4)(d(xy))(1) ground state)) complex, [(py)(2)Fe(III)(meso-NH(2)-OEP)](+). Such pyridine solutions are air-sensitive, and the remarkable degradation has been monitored by (1)H NMR spectroscopy. These studies reveal a stepwise conversion of ClFe(III)(meso-NH(2)-OEP) into an open-chain tetrapyrrole complex in which the original amino group and the attached meso carbon atom have been converted into a nitrile group. Additional oxidation at an adjacent meso carbon occurs to produce a ligand that binds iron by three pyrrole nitrogen atoms and the oxygen atom introduced at a meso carbon. This open-chain tetrapyrrole complex itself is sensitive to attack by dioxygen and is converted into a tripyrrole complex that is stable to further oxidation and has been isolated. The process of oxidation of the Fe(III) complex, ClFe(III)(meso-NH(2)-OEP), is compared with that of the iron(II) complex, (py)(2)Fe(II)(meso-NH(2)-OEP); both converge to form identical products.     

2:2 Fe(III):ligand and "adamantane core" 4:2 Fe(III):ligand (hydr)oxo complexes of an acyclic ditopic ligand

A bis-hydroxo-bridged diiron(III) complex and a bis-mu-oxo-bis-mu-hydroxo-bridged tetrairon(III) complex are isolated from the reaction of 2,6-bis((N,N'-bis-(2-picolyl)amino)methyl)-4-tert-butylphenol (Hbpbp) with iron perchlorate in acidic and neutral solutions respectively. The X-ray structure of the dinuclear complex [{(Hbpbp)Fe([mu-OH)}(2)](ClO(4))(4).2C(3)H(6)O (1.2C3H6O) shows that only one of the metal-binding cavities of each ligand is occupied by an iron(III) atom and two [Fe(Hbpbp)]3+ units are linked together by two hydroxo bridging groups to form a [Fe(III)-(mu-OH)](2) rhomb structure with Fe...Fe = 3.109(1)A. The non-coordinated tertiary amine of Hbpbp is protonated. Magnetic susceptibility measurements show a well-behaved weak antiferromagnetic coupling between the two Fe(III) atoms, J= -8 cm(-1). The tetranuclear complex [(bpbp)(2)Fe(4)(mu-O)(2)(mu-OH)(2)](ClO(4))(4)(2) was isolated as two different solvates .4CH(3)OH and .6H(2)O with markedly different crystal morphologies at pH ca. 6. Complex .4CH(3)OH forms red cubic crystals and .6H(2)O forms green crystalline platelets. The Fe(4)O(6) core of shows an adamantane-like structure: The six bridging oxygen atoms are provided by the two phenolato groups of the two bpbp(-) ligands, two bridging oxo groups and two bridging hydroxo groups. The hydroxo and oxo ligands could be distinguished on the basis of Fe-O bond lengths of the two different octahedral iron sites: Fe-mu-OH, 1.953(5), 2.013(5)A and Fe-mu-O, 1.803(5), 1.802(5)A. The difference in ligand environment is too small for allowing Mossbauer spectroscopy to distinguish between the two crystallographically independent Fe sites. The best fit to the magnetic susceptibility of .4CH(3)OH was achieved by using three coupling constants J(Fe-OPh-Fe)= 2.6 cm(-1), J(Fe-OH-Fe)=-0.9 cm(-1), J(Fe-O-Fe)=-101 cm(-1) and iron(III) single ion ZFS (|D|= 0.15 cm(-1)).     

Unusual iron(III) ate complexes stabilized by Li-pi interactions

Several iron(III) complexes incorporating diamidoether ligands are described. The reaction between [Li(2)[RN(SiMe(2))](2)O] and FeX(3) (X=Cl or Br; R=2,4,6-Me(3)Ph or 2,6-iPr(2)Ph) form unusual ate complexes, [FeX(2)Li[RN(SiMe(2))](2)O](2) (2, X=Cl, R=2,4,6-Me(3)Ph; 3, X=Br, R=2,4,6-Me(3)Ph; 4, X=Cl, R=2,6-iPr(2)Ph) which are stabilized by Li-pi interactions. These dimeric iron(III)-diamido complexes exhibit magnetic behaviour characteristic of uncoupled high spin (S= 5/2 ) iron(III) centres. They also undergo halide metathesis resulting in reduced iron(II) species. Thus, reaction of 2 with alkyllithium reagents leads to the formation of iron(II) dimer [Fe[Me(3)PhN(SiMe(2))](2)O](2) (6). Similarly, the previously reported iron(III)-diamido complex [FeCl[tBuN(SiMe(2))](2)O](2) (1) reacts with LiPPh(2) to yield the iron(II) dimer [Fe[tBuN(SiMe(2))](2)O](2) but reaction with LiNPh(2) gives the iron(II) product [Fe(2)(NPh(2))(2)[tBuN(SiMe(2))](2)O] (5). Some redox chemistry is also observed as side reactions in the syntheses of 2-4, yielding THF adducts of FeX(2): the one-dimensional chain [FeBr(2)(THF)(2)](n) (7) and the cluster [Fe(4)Cl(8)(THF)(6)]. The X-ray crystal structures of 3, 5 and 7 are described.