Synthetic scope of Ru(OH)x/Al2O3-catalyzed hydrogen-transfer reactions: an application to reduction of allylic alcohols by a sequential process of isomerization/Meerwein-Ponndorf-Verley-type reduction

Reduction of allylic alcohols can be promoted efficiently by the supported ruthenium catalyst Ru(OH)x/Al2O3. Various allylic alcohols were converted to saturated alcohols in excellent yields by using 2-propanol without any additives. This Ru(OH)x/Al2O3-catalyzed reduction of a dienol proceeds only at the allylic double bond to afford the corresponding enol, and chemoselective isomerization and reduction can be realized under similar conditions. The catalysis is truly heterogeneous and the high catalytic performance can be maintained during at least three recycles of the Ru(OH)x/Al2O3 catalyst. The transformation of allylic alcohols to saturated alcohols consists of three sequential reactions: oxidation of allylic alcohols to alpha,beta-unsaturated carbonyl compounds; reduction of alpha,beta-unsaturated carbonyl compounds to saturated carbonyl compounds; and reduction of saturated carbonyl compounds to saturated alcohols.     

Scope, kinetics, and mechanistic aspects of aerobic oxidations catalyzed by ruthenium supported on alumina

The Ru/Al(2)O(3) catalyst was prepared by modification of the preparation of Ru(OH)(3).n H(2)O. The present Ru/Al(2)O(3) catalyst has high catalytic activities for the oxidations of activated, nonactivated, and heterocyclic alcohols, diols, and amines at 1 atm of molecular oxygen. Furthermore, the catalyst could be reused seven times without a loss of catalytic activity and selectivity for the oxidation of benzyl alcohol. A catalytic reaction mechanism involving a ruthenium alcoholate species and beta-hydride elimination from the alcoholate has been proposed. The reaction rate has a first-order dependence on the amount of catalyst, a fractional order on the concentration of benzyl alcohol, and a zero order on the pressure of molecular oxygen. These results and kinetic isotope effects indicate that beta-elimination from the ruthenium alcoholate species is a rate-determining step.     

Synthesis of alkyl iodides/nitriles from carbonyl compounds using novel ruthenium tris(2,2,6,6-tetramethyl-3,5-heptanedionate) as catalyst

Aldehydes and ketones were hydrogenated to the corresponding alcohols, which were then transformed in situ into their respective iodides and nitriles in good yields. A structurally well-defined O-containing transition metal complex, Ru (TMHD)₃, was found to be the active catalyst for hydrogenation, iodination and cyanation reactions. It has high affinity for the transformation of benzylic alcohols to iodides and nitriles.     

Heterogeneously catalyzed aerobic oxidative biaryl coupling of 2-naphthols and substituted phenols in water

The oxidative coupling reaction can efficiently be promoted by supported ruthenium catalyst Ru(OH)x/Al2O3. A variety of 2-naphthols and substituted phenols can be converted to the corresponding biaryl compounds in moderate to excellent yields using molecular oxygen as a sole oxidant in water without any additives. The catalysis is truly heterogeneous in nature, and Ru(OH)x/Al2O3 can easily be recovered after the reaction. The catalyst can be recycled seven times with the maintenance of the catalytic performance, and the total turnover number reaches up to 160. The results of competitive coupling reactions suggest that the present oxidative biaryl coupling reaction proceeds via the homolytic coupling of two radical species and the Ru(OH)x/Al2O3 catalyst acts as an one-electron oxidant. Two radical species are coupled to give the corresponding biaryl product, and the one-electron reduced catalyst is reoxidized by molecular oxygen. The amounts of O(2) uptake and H(2)O formation were almost one-quarter and one-half the amount of substrate consumed, respectively, supporting the reaction mechanism. The kinetic data and kinetic isotope effect show that the reoxidation of the reduced catalyst is the rate-limiting step for the coupling reaction.     

Synthesis of a polymer–ruthenium complex Ru(pbbp)(pydic) and its catalysis in the oxidation of secondary alcohols with TBHP as oxidant

A polymer–ruthenium complex Ru(pbbp)(pydic) was synthesized from the reaction of poly-2,6-bis(benzimidazolyl)pyridine (pbbp) with RuCl₃ and disodium pyridine-2,6-dicarboxylate (pydic). The Ru(pbbp)(pydic) was characterized thoroughly by spectroscopic methods. ICP analysis revealed that the percentage of complexation of 2,6-bis(benzimidazolyl)pyridine unit in pbbp was about 83%. The complex was tested as a heterogeneous catalyst for the oxidation of secondary alcohols to their corresponding carbonyl compounds in solvent-free conditions using aqueous tert-butyl hydroperoxide as oxidant. The developed catalytic system exhibited high activity and broad functional group compatibility, allowing a variety of secondary alcohols, including substituted secondary benzylic alcohols and secondary aliphatic ones, to be oxidized to the corresponding ketones in high yields. This Ru(pbbp)(pydic) could be recycled for several times, but it dissolved in part in the reaction mixture during the catalytic run leading to gradual deactivation of the catalyst with repeated runs.     

1,3-Dipolar cycloaddition of organic azides to alkynes by a dicopper-substituted silicotungstate

The dicopper-substituted gamma-Keggin silicotungstate TBA 4[gamma-H2SiW10O36Cu2(mu-1,1-N3)2] (I, TBA = tetra- n-butylammonium) could act as an efficient precatalyst for the regioselective 1,3-dipolar cycloaddition of organic azides to alkynes. Various combinations of substrates (four azides and eight alkynes) were efficiently converted to the corresponding 1,2,3-triazole derivatives in excellent yields without any additives. The present system was applicable to a larger-scale cycloaddition of benzyl azide to phenylacetylene under solvent-free conditions (100 mmol scale) in which 21.5 g of the analytically pure corresponding triazole could be isolated. In this case, the turnover frequency and the turnover number reached up to 14,800 h(-1) and 91,500, respectively, and these values were the highest among those reported for the copper-mediated systems so far. In addition, I could be applied to the one-pot synthesis of 1-benzyl-4-phenyl-1H-1,2,3-triazole from benzyl chloride, sodium azide, and phenylacetylene. The catalyst effect, kinetic, mechanistic, and computational studies show that the reduced dicopper core plays an important role in the present 1,3-dipolar cycloaddition.     

Synthesis, structure, and redox and catalytic properties of a new family of ruthenium complexes containing the tridentate bpea ligand

We have prepared a new family of ruthenium complexes containing the bpea ligand (where bpea stands for N,N-bis(2-pyridyl)ethylamine), with general formula [Ru(bpea)(bpy)(X)](n+) (2, X = Cl(-); 3, X = H(2)O; 4, X = OH(-)), and the trisaqua complex [Ru(bpea)(H2O)(3)](2+), 6. The complexes have been characterized through elemental analyses, UV-vis and (1)H NMR spectroscopy, and electrochemical studies. For complex 3, the X-ray diffraction structure has also been solved. The compound belongs to the monoclinic P2(1)/m space group, with Z = 2, a = 7.9298(6) A, b = 18.0226(19) A, c = 10.6911(8) A, and beta = 107.549(8) degrees. The Ru metal center has a distorted octahedral geometry, with the O atom of the aquo ligand placed in a trans position with regard to the aliphatic N atom of the bpea ligand so that the molecule possesses a symmetry plane. NMR spectra show that the complex maintains its structure in aqueous solution, and that the corresponding chloro complex also has a similar structural arrangement. The pH dependence of the redox potential for the complex [Ru(bpea)(bpy)(H2O)](PF(6))(2) is reported, as well as the ability of the corresponding oxo complex to catalyze the oxidation of benzylic alcohol to benzaldehyde in both chemical and electrochemical manners.     

Synthetic scope and mechanistic studies of Ru(OH)x/Al2O3-catalyzed heterogeneous hydrogen-transfer reactions

Three kinds of hydrogen-transfer reactions, namely racemization of chiral secondary alcohols, reduction of carbonyl compounds to alcohols using 2-propanol as a hydrogen donor, and isomerization of allylic alcohols to saturated ketones, are efficiently promoted by the easily prepared and inexpensive supported ruthenium catalyst Ru(OH)x/Al2O3. A wide variety of substrates, such as aromatic, aliphatic, and heterocyclic alcohols or carbonyl compounds, can be converted into the desired products, under anaerobic conditions, in moderate to excellent yields and without the need for additives such as bases. A larger scale, solvent-free reaction is also demonstrated: the isomerization of 1-octen-3-ol with a substrate/catalyst ratio of 20,000/1 shows a very high turnover frequency (TOF) of 18,400 h(-1), with a turnover number (TON) that reaches 17,200. The catalysis for these reactions is intrinsically heterogeneous in nature, and the Ru(OH)x/Al2O3 recovered after the reactions can be reused without appreciable loss of catalytic performance. The reaction mechanism of the present Ru(OH)x/Al2O3-catalyzed hydrogen-transfer reactions were examined with monodeuterated substrates. After the racemization of (S)-1-deuterio-1-phenylethanol in the presence of acetophenone was complete, the deuterium content at the alpha-position of the corresponding racemic alcohol was 91%, whereas no deuterium was incorporated into the alpha-position during the racemization of (S)-1-phenylethanol-OD. These results show that direct carbon-to-carbon hydrogen transfer occurs via a metal monohydride for the racemization of chiral secondary alcohols and reduction of carbonyl compounds to alcohols. For the isomerization, the alpha-deuterium of 3-deuterio-1-octen-3-ol was selectively relocated at the beta-position of the corresponding ketones (99% D at the beta-position), suggesting the involvement of a 1,4-addition of ruthenium monohydride species to the alpha,beta-unsaturated ketone intermediate. The ruthenium monohydride species and the alpha,beta-unsaturated ketone would be formed through alcoholate formation/beta-elimination. Kinetic studies and kinetic isotope effects show that the Ru-H bond cleavage (hydride transfer) is included in the rate-determining step.     

离子液体-水介质中离子液体负载TEMPO催化选择氧化合成脂肪醇羟基芳香醛和酮

由于脂肪醇羟基和苄醇羟基具有相同的氧化反应活性,所以当分子内同时含有脂肪醇羟基和苄醇羟基时,很难选择氧化苄醇羟基合成含脂肪醇羟基的芳香醛或酮。本文报道了在离子液体-水介质中,NCS/NaBr/IL-TEMPO（离子液体负载TEMPO）催化氧化合成含有脂肪醇羟基的芳香醛、酮的方法,反应条件温和,选择性好,收率高,且离子液体和催化剂可以循环使用。     

Water oxidation intermediates applied to catalysis: benzyl alcohol oxidation

Four distinct intermediates, Ru(IV)═O(2+), Ru(IV)(OH)(3+), Ru(V)═O(3+), and Ru(V)(OO)(3+), formed by oxidation of the catalyst [Ru(Mebimpy)(4,4'-((HO)(2)OPCH(2))(2)bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) and 4,4'-((HO)(2)OPCH(2))(2)bpy = 4,4'-bismethylenephosphonato-2,2'-bipyridine] on nanoITO (1-PO(3)H(2)) have been identified and utilized for electrocatalytic benzyl alcohol oxidation. Significant catalytic rate enhancements are observed for Ru(V)(OO)(3+) (~3000) and Ru(IV)(OH)(3+) (~2000) compared to Ru(IV)═O(2+). The appearance of an intermediate for Ru(IV)═O(2+) as the oxidant supports an O-atom insertion mechanism, and H/D kinetic isotope effects support net hydride-transfer oxidations for Ru(IV)(OH)(3+) and Ru(V)(OO)(3+). These results illustrate the importance of multiple reactive intermediates under catalytic water oxidation conditions and possible control of electrocatalytic reactivity on modified electrode surfaces.     

A ruthenium-grafted hydrotalcite as a multifunctional catalyst for direct alpha-alkylation of nitriles with primary alcohols

Treatment of a hydrotacite, Mg6Al2(OH)16CO3, with an aqueous solution of RuCl3.nH2O afforded a monomeric Ru(IV) species on the surface of the hydrotalcite. This novel Ru-grafted hydrotalcite (Ru/HT) efficiently catalyzed alpha-alkylation of nitriles with primary alcohols through the cooperative catalysis between the Ru species and the surface base sites. The catalyst system could be further extended for the one-pot synthesis of alpha,alpha-dialkylated phenylacetonitriles via the base-catalyzed Michael reaction of alpha-alkylated phenylacetonitrile with activate olefins.     

Environmentally friendly one-pot synthesis of alpha-alkylated nitriles using hydrotalcite-supported metal species as multifunctional solid catalysts

A ruthenium-grafted hydrotalcite (Ru/HT) and hydrotalcite-supported palladium nanoparticles (Pd(nano)/HT) are easily prepared by treating basic layered double hydroxide, hydrotalcite (HT, Mg(6)Al(2)(OH)(16)CO(3)) with aqueous RuCl(3)n H(2)O and K(2)[PdCl(4)] solutions, respectively, using surface impregnation methods. Analysis by means of X-ray diffraction, and energy-dispersive X-ray, electron paramagnetic resonance, and X-ray absorption fine structure spectroscopies proves that a monomeric Ru(IV) species is grafted onto the surface of the HT. Meanwhile, after reduction of a surface-isolated Pd(II) species, highly dispersed Pd nanoclusters with a mean diameter of about 70 A is observed on the Pd(nano)/HT surface by transmission electron microscopy analysis. These hydrotalcite-supported metal catalysts can effectively promote alpha-alkylation reactions of various nitriles with primary alcohols or carbonyl compounds through tandem reactions consisting of metal-catalyzed oxidation and reduction, and an aldol reaction promoted by the base sites of the HT. In these catalytic alpha-alkylations, homogeneous bases are unnecessary and the only by-product is water. Additionally, these catalyst systems are applicable to one-pot syntheses of glutaronitrile derivatives.     

Multiple pathways for benzyl alcohol oxidation by Ru(V)═O3+ and Ru(IV)═O2+

Significant rate enhancements are found for benzyl alcohol oxidation by the Ru(V)═O(3+) form of the water oxidation catalyst [Ru(Mebimpy)(bpy)(OH(2))](2+) [Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl)pyridine; bpy = 2,2'-bipyridine] compared to Ru(IV)═O(2+) and for the Ru(IV)═O(2+) form with added bases due to a new pathway, concerted hydride proton transfer (HPT).     

Ruthenium(II)-cored supramolecular organic framework-mediated recyclable visible light photoreduction of azides to amines and cascade formation of lactams

Porous[Ru(bpy)₃]²⁺-cored supramolecular metal organic framework can efficiently catalyze visible light photoreduction of various azides to afford amines and, through cascade reactions, lactams.     

助剂前体ZnSO_4浓度对苯选择加氢制环己烯Ru-Zn催化剂性能的影响

共沉淀法制备了Ru-Zn催化剂,在ZrO_2作分散剂下考察了助剂前体ZnSO_4浓度对苯选择加氢制环己烯Ru-Zn催化剂性能的影响.并用X-射线衍射(XRD)、X-射线荧光光谱(XRF)、N_2-物理吸附、透射电镜(TEM)和X-射线光电子能谱(XPS)等手段对催化剂进行了表征.结果表明,当ZnSO_4前体浓度低于0.10 mol/L时,Ru-Zn催化剂中Zn以ZnO形式存在,在加氢过程中ZnO可以与反应修饰剂ZnSO_4反应生成(Zn( OH)_2)_3(ZnSO_4)(H_2O)_3盐.继续增加ZnSO_4前体浓度,催化剂中Zn以ZnO和NaZn_4(SO_4)(Cl)(OH)_6·6H_2O盐存在,在加氢过程中ZnO和NaZn_4(SO_4)(Cl)(OH)_6·6H_2O盐可以与反应修饰剂ZnSO_4反应生成(Zn( OH)_2)_3(ZnSO_4)(H_2O)_5.(Zn( OH)_2)_3(ZnSO_4)(H_2O)_x(x=3或5)盐的Zn~(2+)可以转移金属Ru的部分电子.因此,随ZnSO_4前体浓度的增加,(Zn( OH)_2)_3(ZnSO_4)(H_2O)_x的量逐渐增加,金属Ru失电子越多,催化剂活性越低,环己烯选择性越高.0.08 mol/L ZnSO_4前体制备Ru-Zn催化剂给出了59.1%的环己烯收率,而且该催化剂具有良好的重复使用性能和稳定性.     

Synthesis,characterization and catalytic properties of tetrachlorocuprate(II) immobilized on layered double hydroxide

Readily prepared copper(II) immobilized on layered double hydroxide has been found to effectively catalyse the 1,3‐dipolar cycloaddition (CuAAC) of a variety terminal alkynes and benzyl azides generated in situ from sodium azide and benzyl halides furnishing the corresponding 1,2,3‐triazoles in excellent yields. The advantages of the protocol are short reaction time, mild reaction conditions, reusability of the catalyst and applicability to a wide range of substrates.     

Reactions of [Ru(H(2)O)(6)](2+) with water-soluble tertiary phosphines

In aqueous solutions under mild conditions, [Ru(H(2)O)(6)](2+) was reacted with various water-soluble tertiary phosphines. As determined by multinuclear NMR spectroscopy, reactions with the sulfonated arylphosphines L =mtppms, ptppms and mtppts yielded only the mono- and bisphosphine complexes, [Ru(H(2)O)(5)L](2+), cis-[Ru(H(2)O)(4)L(2)](2+), and trans-[Ru(H(2)O)(4)L(2)](2+) even in a high ligand excess. With the small aliphatic phosphine L = 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1(3,7)]decane (pta) at [L]:[Ru]= 12:1, the tris- and tetrakisphosphino species, [Ru(H(2)O)(3)(pta)(3)](2+), [Ru(H(2)O)(2)(pta)(4)](2+), [Ru(H(2)O)(OH)(pta)(4)](+), and [Ru(OH)(2)(pta)(4)] were also detected, albeit in minor quantities. These results have significance for the in situ preparation of Ru(II)-tertiary phosphine catalysts. The structures of the complexes trans-[Ru(H(2)O)(4)(ptaMe)(2)](tos)(4)x2H(2)O, trans-[Ru(H(2)O)(4)(ptaH)(2)](tos)(4)[middle dot]2H(2)O, and trans-mer-[RuI(2)(H(2)O)(ptaMe)(3)]I(3)x2H(2)O, containing protonated or methylated pta ligands (ptaH and ptaMe, respectively) were determined by single crystal X-ray diffraction.     

Efficient heterogeneous oxidation of alkylarenes with molecular oxygen

[reaction: see text] Ru(OH)x/Al2O3 efficiently catalyzes the heterogeneous aerobic oxygenation or oxidative dehydrogenation of alkylarenes to give the corresponding oxygenated or dehydrogenated products. Catalyst/product separation is very easy, and the recovered catalyst is reusable with retention of the high catalytic performance.     

Oxidation of alkylarenes by nitrate catalyzed by polyoxophosphomolybdates: synthetic applications and mechanistic insights

Alkylarenes were catalytically and selectively oxidized to the corresponding benzylic acetates and carbonyl products by nitrate salts in acetic acid in the presence of Keggin type molybdenum-based heteropolyacids, H(3+)(x)()PV(x)()Mo(12)(-)(x)()O(40) (x = 0-2). H(5)PV(2)Mo(10)O(40) was especially effective. For methylarenes there was no over-oxidation to the carboxylic acid contrary to what was observed for nitric acid as oxidant. The conversion to the aldehyde/ketone could be increased by the addition of water to the reaction mixture. As evidenced by IR and (15)N NMR spectroscopy, initially the nitrate salt reacted with H(5)PV(2)Mo(10)O(40) to yield a N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] intermediate. In an electron-transfer reaction, the proposed N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] complex reacts with the alkylarene substrate to yield a radical-cation-based donor-acceptor intermediate, N(IV)O(2)[H(4)PV(2)Mo(10)O(40)]-ArCH(2)R(+)(*). Concurrent proton transfer yields an alkylarene radical, ArCHR(*), and NO(2). Alternatively, it is possible that the N(V)O(2)(+)[H(4)PV(2)Mo(10)O(40)] complex abstracts a hydrogen atom from alkylarene substrate to directly yield ArCHR(*) and NO(2). The electron transfer-proton transfer and hydrogen abstraction scenarios are supported by the correlation of the reaction rate with the ionization potential and the bond dissociation energy at the benzylic positions of the alkylarene, respectively, the high kinetic isotope effect determined for substrates deuterated at the benzylic position, and the reaction order in the catalyst. Product selectivity in the oxidation of phenylcyclopropane tends to support the electron transfer-proton transfer pathway. The ArCHR(*) and NO(2) radical species undergo heterocoupling to yield a benzylic nitrite, which undergoes hydrolysis or acetolysis and subsequent reactions to yield benzylic acetates and corresponding aldehydes or ketones as final products.     

助剂Fe和反应修饰剂修饰的Ru催化剂上苯选择加氢制环己烯

共沉淀法制备了Ru-Fe(x)催化剂,并利用X射线衍射(XRD)、X射线荧光光谱(XRF)、N2物理吸附和透射电镜等手段对催化剂进行了表征.结果表明,Ru-Fe(x)催化剂中助剂Fe以Fe3O4形式存在.单独Fe3O4并不能提高Ru催化剂的环己烯选择性.但在加氢过程中Fe3O4可与反应修饰剂ZnSO4反应生成(Zn(OH)2)3(ZnSO4)(H2O)x(x=1 or 3).化学吸附的(Zn(OH)2)3(ZnSO4)(H2O)x(x=1 or 3)在提高Ru催化剂环己烯选择性中起着关键作用.此外,Ru-Fe(x)催化剂的性能还与浆液中的Zn2+浓度和pH值有关.在0.61 mol/L ZnSO4溶液中Ru-Fe(0.47)催化剂不但给出了56.7%的环己烯收率,而且具有良好的稳定性和重复使用性能.化学吸附在Ru表面的Fe2+同样能提高Ru催化剂的环己烯选择性.在0.29 mol/L和0.61 mol/L FeSO4溶液中Ru-Fe(0.47)催化剂上化学吸附Fe2+量近似,性能近似.因为Fe2+和Zn2+性质的差异,在0.29 mol/L和0.61 mol/L FeSO4溶液中Ru-Fe(0.47)催化剂的环己烯选择性分别低于在同浓度的ZnSO4溶液中的.