Cationic polymerization of γ-methyl- and α-methylphenylallene

The cationic polymerizations of γ-methylphenylallene ( 1 ) and α-methylphenylallene ( 2 ) were carried out with some Lewis acids at 25 and 0°C in dichloromethane to obtain the corresponding polymers through allyl cations, respectively. Tin (IV) chloride was found to be an effective catalyst for the cationic polymerization of both allenes 1 and 2 compared with other Lewis acids. Thus, in the polymerization of 1 , methanol-insoluble polymer was only obtained using Tin (IV) chloride, and M?_n of methanol-insoluble polymer obtained by Tin (IV) chloride was the highest in the polymerization of 2 . From the analysis of ¹H- and ¹³C-NMR spectra of the obtained polymers, the polymer from 1 consisted of two kinds of units polymerized by each double bonds of allene 1 , whereas the polymer from 2 consisted of only one unit polymerized by terminal double bond of allene 2 . Moreover, effect of solvent on the cationic polymerizations of 1 and 2 were discussed.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Stearyl ferulate-based solid lipid nanoparticles for the encapsulation and stabilization of β-carotene and α-tocopherol

UVA exposure induces DNA damage that could result in skin carcinogenesis. Antioxidants are usually employed as protective agents to avoid this problem: in particular, both β-carotene and α-tocopherol can protect the skin against UVA-induced damage. It is well known that the photochemical instability of these compounds has been a limiting factor for their applications to protect skin. In this study, stearyl ferulate-based solid lipid nanoparticles (SF-SLNs), as vehicles for β-carotene and α-tocopherol, were formulated to improve the stability of these compounds. The SF-SLNs were characterized for entrapment efficiency, size and shape together with their cytotoxicity and capability to inhibit lipid peroxidation. After treatment with a pro-oxidant and/or exposition to sunlight the antioxidants entrapped in SF-SLNs were extremely stable. The results highlighted how SF-SLNs represent a suitable vehicle for β-carotene and α-tocopherol stabilizing and protecting them from degradation. A dermatological formulation in order to prevent skin damages is, therefore, suggested.     

A Novel Method for the Synthesis of α,β‐Unsaturated Amides Mediated by Samarium Diiodide

Promoted by Samarium diiodide (SmI₂), α,β‐unsaturated amides were formed from nitrogen anions (formed in situ by the reduction of nitro compounds) and α,β‐unsaturated esters. This reaction contrasts with the conjugate addition between amines and α,β‐unsaturated esters promoted by samarium triiodide (SmI₃) and provides an alternative attractive way to obtain α,β‐unsaturated amides using SmI₂.     

Oxidative acylation of α,α‐diarylallylic alcohols: Synthesis of 1,2,4‐triarylbutane‐1,4‐diones

A metal‐free mediated oxidative acylation of α,α‐diarylallylic alcohols with simple aromatic aldehydes for the synthesis of 1,2,4‐triphenylbutane‐1,4‐diones is presented. In the presence of TBPB (tert‐butyl peroxybenzoate), desired products were obtained in good to excellent yields for 28 examples. This protocol features high regioselectivity, wide functional group tolerance and atom economy.     

Synthesis of α,β‐Unsaturated Ketones and Esters Using Polymer‐supported Selenium Bromide

Treatment of the polymer‐supported α‐phenylseleno ketones and esters prepared from polymer‐supported selenium bromide with ketone and ester enolates with hydrogen peroxide afford α,β‐unsaturated ketones and esters in good yields and high purities.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Reactions of 3, 5-Dimethyl-4-Carbethoxy-2-Cyclohexen-1-One at α-Position

3, 5-Dimethyl-4-carbethoxy-2-cyclohexen-1-one has been synthesized through the Knoevenagel condensation¹, which is then subjected to alkylation and acylation at α-position. The resulting products are hydrolyzed and decarboxylated to α-substituted cyclohexenones. 3, 5-Dimethyl-2-cyclohexen-1-one is converted by N-bromosuccinimide to phenol via enolization².     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Palladium‐catalyzed decarboxylative coupling of α,β‐unsaturated carboxylic acids with aryl tosylates

We report a general method for selective cross‐coupling of α,β‐unsaturated carboxylic acids with aryl tosylates enabled by versatile Pd(II) complexes. This method features the general cross‐coupling of ubiquitous α,β‐unsaturated carboxylic acids by decarboxylation. The transformation is characterized by its operational simplicity, the use of inexpensive, air‐stable Pd(II) catalysts, scalability and wide substrate scope. The reaction proceeds with high trans selectivity to furnish valuable (E)‐1,2‐diarylethenes.     

Synthesis and Biological Activity of α-Methylene-γ-butyrolactones

α-Methylene-γ-butyrolactones [dihydro-3-methylene-2(3H)furanones] constitute an important group of natural products and possess wide-ranging biological activities. Progress in the synthesis of the heterocycle and the classification of the synthetic methods are not only of practical interest, but also fundamentally important as a current example for the construction of an unusual 1,4-functionality distance and an α-substituted acrylic ester moiety which is susceptible to nucleophilic attack.     

Synthesis of Aryl α,α-Difluoroalkyl Ketones as Potent Inhibitors of Cholesterol Esterase

Aryl α,α-difluoroalkyl ketones were synthesized from the reaction of ethyl α,α-difluoroacylate with aryl lithium at ?78°C or from the coupling of aryl iododifluoromethyl ketone with 1-alkene in the presence of tetcrakis(triphenylphosphine)palladium(0). These compounds were potent inhibitors of pancreatic cholesterol esterase with K_i values in the range 15 μM-20 nM.     

An efficient and convenient transformation of α-haloketones to α-hydroxyketones using cesium formate

A new safe and convenient transformation has been developed. In the presence of cesium formate in dry MeOH solution, α-haloketones underwent direct conversion reaction to afford α-hydroxyketone in excellent yields. Furthermore, this methodology can be extended and applied in 2-chloro-N-(1,3-diphenyl-1H-pyrazol-5-yl)acetamide, 2-chloro-N-(2,6-dimethylphen-yl)acetamide, 1-(bromomethylsulfonyl)benzene, and N-(bromomethyl)phthalimide to give the corresponding products in moderate to excellent yields.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Organocatalytic Enantioselective Synthesis of Tetrasubstituted α‐Amino Allenoates by Dearomative γ‐Addition of 2,3‐Disubstituted Indoles to β,γ‐Alkynyl‐α‐imino Esters

The first asymmetric synthesis of tetrasubstituted α‐amino allenoates by a chiral phosphoric acid catalyzed dearomative γ‐addition reaction of 2,3‐disubstituted indoles to β,γ‐alkynyl‐α‐imino esters is reported. This method provides access to a series of highly functionalized tetrasubstituted allenes featuring quaternary stereocenters in high yields, and with excellent regio‐, diastereo‐, and enantioselectivities under mild conditions without by‐product formation. Representative large‐scale reactions and diverse transformations of the products into various scaffolds with potential biological activities render are also disclosed. The mechanism of the reaction was elucidated by control reactions and DFT calculations.     

The influence of short branches on the α, β and γ-relaxation processes of ultra-high strength polyethylene fibers

Dynamic mechanical measurements were conducted for several kinds of ultra–high-strength polyethylene fibers with different methyl branch contents. As is the case with conventional polyethylene materials, UHSPE fibers also exhibit α, β, and γ-relaxation dispersions. Each relaxation process is the function of both the tensile moduli and the branch contents of UHSPE fibers. It was also found that the γ-process of UHSPE fibers is dominated mainly by the localized molecular motion in the crystalline part, such as a dislocation mode of crystallite defects, which is very sensitive to the branching content. From the time and temperature superposition of the frequency dispersion experiments, it was found that activation energies for both the α2-process and α3-process increase proportionally to the methyl branch content, while the α1-process is not so affected by the branch content. This result shows that the incorporated branch sites in the crystalline part effectively hinder the chain-to-chain slippage; meanwhile, they have not hindered the slippage at the grain boundary so far, which also enables us to explain the creep improvement of UHSPE fibers through branch incorporation with the same mechanism. © 1994 John Wiley & Sons, Inc.     

Iridium‐Catalyzed Enantioselective Allylic Substitution of Unstabilized Enolates Derived from α,β‐Unsaturated Ketones

We report Ir‐catalyzed, enantioselective allylic substitution reactions of unstabilized silyl enolates derived from α,β‐unsaturated ketones. Asymmetric allylic substitution of a variety of allylic carbonates with silyl enolates gave allylated products in 62–94 % yield with 90–98 % ee and >20:1 branched‐to‐linear selectivity. The synthetic utility of this method was illustrated by the short synthesis of an anticancer agent, TEI‐9826.     

12/14/14‐Helix Formation in 2:1 α/β‐Hybrid Peptides Containing Bicyclo[2.2.2]octane Ring Constraints

The highly constrained β‐amino acid ABOC induces different types of helices in β urea and 1:1 α/β amide oligomers. The latter can adopt 11/9‐ and 18/16‐helical folds depending on the chain length in solution. Short peptides alternating proteinogenic α‐amino acids and ABOC in a 2:1 α/β repeat pattern adopted an unprecedented and stable 12/14/14‐helix. The structure was established through extensive NMR, molecular dynamics, and IR studies. While the 1:1 α‐AA/ABOC helices diverged from the canonical α‐helix, the helix formed by the 9‐mer 2:1 α/β‐peptide allowed the projection of the α‐amino acid side chains in a spatial arrangement according to the α‐helix. Such a finding constitutes an important step toward the conception of functional tools that use the ABOC residue as a potent helix inducer for biological applications.