Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

Synthesis of novel polypyromellitimides with n‐alkyloxy side chains and their liquid‐crystal aligning property

New well‐defined brush polypyromellitimides with n‐octyloxy and n‐dodecyloxy side chains were prepared by two‐step polycondensations of 3,6‐di(n‐alkyloxy)pyromellitic dianhydrides with various conventional aromatic diamines. Their structures and properties were investigated and compared with those of polyimides without the side chains. The alkyloxylated poly(amic acid)s had inherent viscosities of 0.45–1.09 dL/g. The polyimides showed enhanced solubility in organic solvents and had layered structures in the solid state. As the side‐chain length increased from n‐octyloxy to n‐dodecyloxy, the extent of layered structure formation increased, whereas the glass‐transition temperature and thermal resistance decreased. As for the liquid‐crystal (LC) aligning ability measured with 4‐n‐pentyl‐4′‐cyanobiphenyl on rubbed thin‐film surfaces, all the side‐chain polyimides revealed homogeneous LC alignment parallel to the rubbing direction with distinctively higher pretilt angles than those of the polyimides without the side chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3130–3142, 2004     

Synthesis of new aromatic polyimides with various side chains containing a biphenyl mesogen unit and their abilities to control liquid-crystal alignments on the rubbed surface

New poly(m-phenylene 4,4′-oxydiphthalimide)s containing various side chains, such as 6-(4-biphenylmethoxy)hexyloxy group and 6-(phenylphenoxy)hexyloxy isomers, were synthesized, giving thin films of a high quality. All the polyimides apparently were almost amorphous, but exhibited short-range ordering in some extent, depending on the side chains. By incorporating side chains, the thermal properties, including stability, thermal expansivity, and glass transition temperature, were generally degraded, whereas the optical and dielectric properties were improved. All the polyimides exhibited a good rubbing processability and excellent performance in the controlling of both the alignment and the pretilt of LC molecules in the LC cell. The pretilt angle of LC molecules was easily achieved in a wide-angle range of 8–27°, depending upon the rubbing density as well as the incorporated side chains. The pretilting of LC molecules was very sensitive to all the molecular parameters (namely, the flexibility of polymer chain backbone as well as the isomeric structure of biphenyl mesogen end group, spacer length, and spacer conformation in the side chain) in the polyimide, in addition to the rubbing process. In particular, the side chains, which are much shorter in length than the long alkyl side chains in the polyimides being used widely as LC alignment layers, were evident to involve effectively in the alignment of and the pretilt of LC molecules, which are highly desired in the LC display industry. This might mainly be attributed to a strong interaction between the biphenyl mesogen end group of the side chain and the LC molecule. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2909–2921, 1999     

Polydimethylsiloxanes with amylose side chains by enzymatic polymerization

Maltoheptaonamide modified polydimethylsiloxane was prepared applying a simplified synthetic pathway in the derivatization sequence of the carbohydrate. The products were characterized by ¹³C NMR and FT-IR spectroscopy. The glucan side chains of these “sweet siloxanes” were elongated by enzymatic catalysis with potato phosphorylase.     

Synthesis and properties of new polyimides containing flourinated alkoxy side chains

A series of new polyimides containing fluorinated alkoxy side chains are prepared from novel fluorinated alkoxy diamines. The dieletric constant at 1 kHz in the fluorinated polyimides decreases from 3.3 to 2.6 as fluorine content increases. The refractive index also changes from 1.58 to 1.48, dependent on the fluorine content. In addition, the fluorinated polyimides exhibit lower water absorption than the reference polyimides prepared from m-phenylenediamine.     

Pretilt angle for BTDA,PMDA and CPDA series polyimides with various side chain lengths

Polyamic acid precursors were prepared by mixing dianhydride of 3,3',4,4'-benzophenone-tetracarboxylic dianhydride (BTDA), 1,2,3,4-benzene-tetracarboxylic dianhydride (pyrromellitic dianhydride PMDA), cis-1,2,3,4-cyclopentane-tetracarboxylic dianhydride (CPDA), the diamine (alkyl 3,5-diaminobenzoate) with side chain, and 4,4'-oxydianiline (ODA) without side chain. Copolyimide films with various side chain lengths were prepared by thermal imidization of polyamic acid precursors. The roughness of rubbed polyimide surface increased with increase in the side chain length. The pretilt angle for the BTDA and PMDA series polyimide (PI) increased exponentially with increase in side chain length. Various pretilt angles were obtained on the synthesized polyimides. In the case of CPDA series PI, the pretilt angle was nearly constant at 0 until the alkyl side chain length reached 12 (C12) and then increased markedly at C18. Models of pretilt angle generation were tested.     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Interactions between brushlike polyacrylic acid side chains on a polyacrylate backbone in dioxane-water.

Densely grafted polyacrylic acids (d-PAAs) with overcrowded PAA side chains on the polyacrylate main chains were synthesized and characterized. Acryloyl poly(tert-butyl acrylate) macromonomer [M-P(tert-BA)] was prepared with a definite chain length (n=29) by atom-transfer radical polymerization (ATRP), then homopolymerization was carried out to produce densely grafted P(tert-BA)s with polyacrylate main chains of two different lengths (m=27 and 161). The two d-PAAs were obtained by hydrolyzing d-P(tert-BA)s in the presence of trifluoroacetic acid (TFA). The d-PAAs exhibit intermolecular and intramolecular hydrogen bonding between the carboxylic groups of PAA side chains in dioxane and pyridine; both were investigated using proton nuclear magnetic resonance (1H NMR) spectroscopy. The intermolecular hydrogen bonding was found to be dependent on polymer concentration, temperature, and water content. The intramolecular association between the PAA side chains was found to produce a contraction of the hydrodynamic volume of the d-PAA. Intermolecular hydrogen bonding produces aggregates, as demonstrated by dynamic light scattering (DLS). The clusters were found to shrink as the overall water concentration decreased, and this effect is tentatively explained by considering the gradient in chemical potential of water inside the clusters in comparison with the solvent phase.     

Phase structures and transition behaviors in polymers containing rigid rodlike backbones with flexible side chains. V. Methylene side‐chain effects on structure and molecular motion in a series of polyimides

A series of organo‐soluble hairy‐rod polyimides was recently synthesized from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and di[n‐alkyl]‐4,4′‐diamino‐6,6′‐dibromo‐2,2′‐biphenyldicarboxylate with side chains of varying lengths (the numbers of methylene units), BACBP(n). Dynamic mechanical (DM) results reveal two cooperative relaxation processes for BACBPs(n > 10), which correspond to the two (low‐ and high‐) transition temperatures observed in differential scanning calorimetry (DSC). For BACBPs(n < 10), although two DM relaxation processes can be observed, the low‐temperature relaxation peak shifts into a medium temperature region that is difficult to observe in DSC experiments. Measurements indicate that the density of BACBP(n)s decreases with increasing numbers of methylene units. A discontinuity in the rate of density change can be seen at BACBP(10). Variable temperature solid‐state nuclear magnetic resonance experiments were also carried out to determine the molecular origins of each of the observed DM relaxation processes. The low‐ [for BACBPs(n > 10)] and possibly the medium‐ [for BACBPs(n < 10)] temperature relaxations are associated with the onset of motion in the side chains, and the high‐temperature relaxation is associated with motion in the backbones. Wide‐angle X‐ray diffraction analysis indicates that the lateral packing periodicity of the backbones in the unoriented polyimides changes its relationship with the side‐chain length at around 10 methylene units. In the oriented films of these polyimides, furthermore, those having the long side chains [BACBPs(n > 10)] adopt monoclinic unit cells, whereas those having the short side chains [BACBPs(n ≤ 10)] possess hexagonal unit cells. The drastic temperature difference between the low‐ and medium‐relaxation processes observed in DM experiments may be explained because of a change in the lateral packing arising from the variation of the side‐chain length. The limited mobility afforded the BACBPs(n ≤ 10) is a result of their more ordered conformation and interdigitation between the neighboring side chains. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1633–1646, 1999     

A new triphenylamine-based hyperbranched polyfluorene with oxadiazole units on its side chains

A new triphenylamine-based hyperbranched polymer with electron deficient units of oxadiazole on its side chains was successfully prepared by a modified Suzuki polycondensation with Pd(PPh₃)₄ as a catalyst, K₂CO₃ as a base, and a mixture of THF/toluene (1:1) as the solvent. The electron deficient units of oxadiazole were used to improve the electron injection and transport of the polymer. The results of the cyclic voltammetry (CV) of the polymer indicate that the HOMO and LUMO energy levels match well with the work function of the ITO/PEDOT anode and the metal cathode, respectively. Moreover, the hyperbranched polymer shows blue-emission and the hyperbranched structure effectively suppressed the formation of the aggregates/excimers in the polymer film.     

Preparation and surface properties of the polysiloxane material modified with fluorocarbon side chains

The novel polysiloxane material modified with fluorocarbon side chains was synthesized. FTIR, FNMR were used to characterize the copolymer structure. The emulsion of the modified polysiloxane was prepared. The reflectance spectrum of the dyed polyester fabric treated with the polymer was also discussed. The effect of the modified polysiloxane on the color fastness of the dyed polyester fabric was investigated. The results show that the novel polysiloxane material modified with fluorocarbon side chains had excellent surface activity. It did not affect the shade of color and the fastnesses of the dyed fabrics and could improve the handle of fabrics. The treated fabric with the modified polysiloxane showed excellent repellency to water.     

Rigid rod polymers with flexible side chains. X. Thermotropic mesophases from aromatic stiff-chain polyamides bearing n-alkoxy side chains

The synthesis of stiff-chain poly(1,4-phenylene terephthalamide)s substituted by two as well as by four flexible side chains per repeating unit is described. The solubility of the materials bearing only two side chains is still very low. Appending of four side chains leads to polyamides which dissolve in common organic solvents. All polyamides reported herein form layered structures in the solid state as well as in the mesophase. Polyamides with two side chains have a very weak tendency for crystallization and do not exhibit a transition to the isotropic state even for the longest side chains. Polyamides with four side chains show three reversible thermal transitions: a disordering transition of the side chains, a transition to a layered, smectic-like mesophase, and finally the transition to an isotropic melt. It is shown that the phase behavior of these materials is mainly governed by the strong segregation of main- and side-chains which can be compared best to the microphase separation in block copolymers. © 1993 John Wiley & Sons, Inc.     

Synthesis and properties of polyimides derived from 9,10‐dialkyloxy‐1,2,3,4,5,6,7,8‐octahydro‐2,3,6,7‐anthracenetetracarboxylic 2,3:6,7‐dianhydrides

A series of new polyimides containing alicyclic units and alkyloxy side chains were prepared from 9,10‐dialkyloxy‐1,2,3,4,5,6,7,8‐octahydro‐2,3,6,7‐anthracenetetracarboxylic 2,3:6,7‐dianhydrides and various aromatic diamines. Their physical properties and structures were investigated. Polymers were obtained with inherent viscosities of 0.24–0.53 dL/g. In comparison with the aromatic polyimides, most polymers were readily soluble in common organic solvent such as N‐methylpyrrolidone and m‐cresol. These polymers had glass‐transition temperatures between 111 and 296 °C depending on the structure of the repeating unit and 10% weight‐loss temperatures of 418–477 °C in nitrogen. Wide‐angle X‐ray diffractometry for as‐polymerized samples revealed very low crystallinity and layered structures, which were better developed in the polymers with longer side chains. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1764–1774, 2002     

Synthesis and properties of polyimides bearing acid groups on long pendant aliphatic chains

A series of novel polyimide electrolytes having long pendant sulfo‐ or phosphoalkoxy groups were synthesized for fuel‐cell applications. Sulfodecyloxy‐, phosphodecyloxy‐, and sulfophenoxydodecyloxy‐substituted benzidine monomers were synthesized from dihydroxybenzidine. These monomers were copolymerized with naphthalene tetracarboxylic dianhydride and fluorenylidene dianiline to give the corresponding polyimides. A flexible, ductile, and self‐standing membrane was obtained via casting from the polyimide solution. Because the acid groups were on long pendant side chains and away from the main chains, the polyimide membrane showed improved oxidative and hydrolytic stability in comparison with the polyimides with sulfonic acid groups on the main chains or on the short side chains. High thermal stability (no glass‐transition temperature and a decomposition temperature > 200 °C) was also obtained. The polyimide membrane displayed high proton conductivity of 10^?1 S cm^?1 at 120 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3995–4005, 2006     

New hydrogen-bonded comblike polyimides with mesogenic side chains for stable orientation and fast switching of liquid crystals

ABSTRACT

New supramolecular comblike polyimides with mesogenic side chains for stable homeotropic orientation and fast electro-optical switching of liquid crystals (LCs) have been prepared through selective intermolecular hydrogen bonding between 4-(4-heptylphenyl)benzoic acid (4HPB) and host polyimide. A low concentration of 4HPB as the mesogenic guest molecule was hydrogen-bonded to polyimide backbone leading to the self-assembled comblike polyimide with enhanced homeotropic orientation properties. The electro-optical characteristics of the LC device containing hydrogen-bonded comblike polyimide exhibited better performance than those of LC cell with conventional polyimide. Because the conventional covalent approach for preparation of polyimides requires considerable synthetic efforts to achieve new functionality in polyimide materials, the proposed noncovalent method is a simple one and highly cost effective. Our controlled methodology should find wide application for the fabrication of functional alignment materials requiring high orientation ability.     

Functional polythiiranes 7: Surface activity of polythiiranes with PEO side chains

 Some comb-like polythiiranes with PEO side chains were prepared from the corresponding macromonomers. These new materials are amphiphiles and act as surfactants. Their surface tension and interfacial tension are measured and studied in this paper on account of their structures. The lowering of surface tension measured in polymers bearing methyl terminal group in PEO side chains, are in the same range as these observed with polymers of identical structures but different main chains. An increase of the hydrophobic units in the main chain, obtained in copolymers with methylthiirane does not significantly modified the surface tensions. Better lowering is afforded with structures bearing large alkyl groups as terminal group of PEO side chains. On the contrary, some of these macro-molecules with an optimized EO content largely lower the water/xylene surface tension. The main interest of these new materials is their very low cmc and the stabilization of L₁-type microemulsions. Received: 20 May 1997 Accepted: 25 November 1997     

Potentials of mean force between ionizable amino acid side chains in water

Potentials of mean force (PMF) between all possible ionizable amino acid side chain pairs in various protonation states were calculated using explicit solvent molecular dynamics simulations with umbrella sampling and the weighted histogram analysis method. The side chains were constrained in various orientations inside a spherical cluster of 200 water molecules. Beglov and Roux's Spherical Solvent Boundary Potential was used to account for the solvent outside this sphere. This approach was first validated by calculating PMFs between monatomic ions (K(+), Na(+), Cl(-)) and comparing them to results from the literature and results obtained using Ewald summation. The strongest interaction (-4.5 kcal/mol) was found for the coaxial Arg(+).Glu(-) pair. Many like-charged side chains display a remarkable lack of repulsion, and occasionally a weak attraction. The PMFs are compared to effective energy curves obtained with common implicit solvation models, namely Generalized Born (GB), EEF1, and uniform dielectric of 80. Overall, the EEF1 curves are too attractive, whereas the GB curves in most cases match the minima of the PMF curves quite well. The uniform dielectric model, despite some fortuitous successes, is grossly inadequate.     

Polyimides with side groups: Synthesis and effects of side groups on their properties

Polyimides are a class of well-known high-performance polymers combined the excellent mechanical, electrical, and thermal properties and widely applied in many high-tech fields. Traditional polyimides can only be processed in the state of soluble intermediates with a hazardous step of cyclodehydration and elimination of a nonvolatile polar solvent. Therefore, a great effort has been devoted to the development of soluble polyimides that can be processed in the full imidation state. The incorporation of side groups into the polyimide backbone is an efficient approach to resolve above problems with a little sacrifice of its inherent merits. The subtle variation of side groups in polyimide backbones has allowed researchers to tune their final properties. In particular, some special side groups can endow polyimides the specific property or functionality to broaden their application fields. In this article, we summarize the synthesis of polyimides with side groups in recent 20 years and further discuss the effect of side groups on their physical and specific properties. The future research directions of polyimides with side groups are also discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 533–559     

Molecular weight characterization of soluble high performance polyimides. 2. Validity of universal SEC calibration and absolute molecular weight calculation

Six different soluble high-performance aromatic polyimides, each prepared by solution imidization to three controlled average molecular weights, were analyzed by size exclusion chromatography (SEC) using on-line parallel coupled refractometric and viscometric detectors. N-methylpyrrolidone (NMP) with 0.06 M LiBr and NMP stirred over P₂O₅ were used as mobile phase for four of the polyimides; NMP with 0.06 M LiBr and NMP stirred over P₂O₅ were used as mobile phases for four of the polyimides; NMP with 0.06 M LiBr tetrahydrofuran (THF) and chloroform served as mobile phases for the other two polyimides. For all the samples the stationary phase in the SEC columns was cross-linked polystyrene beads. Molecular weight averages of the polyimides were calculated using universal SEC calibration with polystyrene standards in each solvent. The agreement of the calculated molecular weight averages in the different solvents confirms that the universal SEC calibrations are valid for these semiflexible polymers. There was good agreement with weightaverage molecular weights obtained by low-angle laser light scattering (LALLS) performed in pure NMP. Intrinsic viscosity and molecular weight data for a series of nine samples of one polyimide covering a M_w = 20,000–70,000 g mol^–1 interval were treated to obtain Mark-Houwink-Sakurada constants. Unperturbed chain dimensions of this polyimide were obtained by application of the Stockmayer-Fixman extrapolation procedure to these data. ©1995 John Wiley & Sons, Inc.     

Synthesis and properties of fluorosilicone with perfluorooctylundecyl side chains

A series of fluorosilicone (FLS) homopolymers with 4,4,5,5,6,6,7,7,8,8, 9,9,10,10,11,11,11‐heptadecafluoroundecylmethylsiloxane [? C₈F₁₇CH₂CH₂CH₂(CH₃) SiO? ; HDFUSiO] and copolymers based on dimethylsiloxane [? (CH₃)₂SiO? ] were prepared by the hydrosilylation of 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoro‐1‐undecene (C₈F₁₇CH₂CH?CH₂) with poly(hydromethylsiloxane)s. Thermal characterization showed that the decomposition of fluoroalkyl side chains occurred at about 245 °C. Side‐chain crystallization was observed for FLSs with more than 30 mol % HDFUSiO. The refractive index decreased with increasing HDFUSiO content. The dielectric constant increased with increasing HDFUSiO content. The liquid surface tension of the FLS containing 10 mol % HDFUSiO was as low as that of the highly fluorinated FLSs. FLSs with HDFUSiO and trichlorosilylethyl side chains (Cl₃SiCH₂CH₂? ) were also prepared so that their solid surface tension (surface free energy) could be measured. The surface free energy of these FLSs decreased with increasing Cl₃SiCH₂CH₂? content, but the sliding angle of a water droplet and the contact‐angle hysteresis adversely increased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2704–2714, 2003