Optimal irradiation wavelength in iniferter‐based photocontrolled radical polymerization

In iniferter‐based photocontrolled radical polymerization optimal irradiation wavelength was examined for precise molecular design of star vectors, which can function as high‐performance gene carriers. Monochromatic light in the range from 330 to 400 nm with the interval of about 10 nm was irradiated to tetrafunctional iniferter, 1,2,4,5‐tetrakis(N,N‐diethyldithiocarbamylmethyl)benzene, in the presence of N,N‐dimethyaminopropylacrylamide (DMAPAAm), as a model monomer, in toluene. In all wavelengths tetrabranched polymers were produced except for 400‐nm‐irradiation. The highest conversion reaching to about 35% was observed at the wavelength of 370 nm after only 40 min of irradiation. There was no further increase in conversion by combination with another two wavelengths. HPLC analysis and NMR spectra showed that the polymerization at the optimal wavelength of 370 nm was occurred in a living manner with the ability to control the chain length (from about 5000 to 40,000) having very narrow polydispersity (about 1.6) by changing of the irradiation time, the intensity, and the monomer concentration. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4505–4512, 2008     

Functionalization of PMMA by a functional “iniferter”: Kinetics of polymerization of MMA using N,N′-diethyl-N,N′-bis(2-hydroxyethyl) thiuram disulfide

α,ω-Dihydroxy-terminated-PMMA was synthesized by the bulk polymerization of methyl methacrylate in the presence of a functional “iniferter,” viz., N,N′-diethyl-N,N′-bis(2-hydroxyethyl)thiuram disulfide (DHTD). The kinetics of the polymerization were studied by determining the polymerization rate as a function of the “iniferter” concentration at 60, 70, 85, and 95°C. Evaluation of the data by a computerized multiple regression analysis led to calculation of the various kinetic parameters and the activation energies of the related phenomena. The maximum observed in the R_p–initiator concentration curve was found to shift to lower initiator concentration as the temperature increased. The formal reaction order with respect to the concentration of the initiator decreased with increasing temperature and concentration of DHTD. The chain transfer constants of DHTD with MMA were calculated from the molecular weights of the resulting polymers. The functionalities of the oligomers were calculated from the elemental analysis of the chain end groups. Thermogravimetric analysis revealed that the polymer chain ends were devoid of unsaturated groups and that the polymer underwent degradation only by random scission.     

反应介质对N，N－二乙基二硫代氨基甲酸苄酯引发丙烯酰胺聚合反应的影响

反应介质对Ｎ，Ｎ－二乙基二硫代氨基甲酸苄酯引发丙烯酰胺聚合反应的影响杨文君，沈家骢（青岛化工学院橡塑工程研究所，青岛，２６６０４２）（吉林大学化学系）关键词聚丙烯酰胺，溶剂效应，自由基聚合，引发－转移－终止剂近年来，具有结构的有机硫化物以其优良的Ｉｎ...     

Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

Poly(N-n-butylitaconimide). Preparation and characterization

Poly(N-n-butylitaconimide) was prepared by radical polymerization in benzene and in bulk at 60°C and was subsequently fractionated at 30°C with benzene and methanol as solvent and nonsolvent, respectively. Relationships between molecular weight and intrinsic viscosity (Mark-Houwink-Sakurada equations) in tetrahydrofuran, benzene, and toluene at 30°C are established. From the Burchard-Stockmayer-Fixman plot, the characteristic ratio of this polymer is determined, and local chain conformation is discussed in relation to the termination process in radical polymerization. © 1993 John Wiley & Sons, Inc.     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Living free radical donor-acceptor copolymerization of styrene and N-cyclohexylmaleimide and the synthesis of poly[styrene-co-(N-cyclohexylmaleimide)]/polystyrene block copolymers

Styrene/N-cyclohexylmaleimide copolymers with small polydispersities and controlled molecular weights were synthesized by a free radical copolymerization using an iniferter system consisting of benzoyl peroxide and 2,2,6,6-tetramethylpiperidine-N-oxyl. Due to the interactions of the electropositive (styrene) and electronegative (N-cyclohexylmaleimide) monomers the brutto polymerization rates are higher than for other living polymerizations initiated with the same iniferter system. The prepared copolymers were used as macroiniferters for bulk polymerization of styrene.     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

Study of the kinetics of styrene copolymerization with divinyl sulfide and the structure of macromolecules

The kinetics of the free-radical copolymerization of styrene with divinyl sulfide in the presence of N,N′-bis(vinyloxyethyl)thiuram disulfide as an iniferter has been studied. The rate of polymerization is shown to decrease with increasing iniferter concentration. The structure of the copolymers isolated in the course of copolymerization has been investigated by electron microscopy and compared with that of the copolymers synthesized using AIBN as an initiator. Evolution in the morphology of the polymer phase during the process, which consists in self-organization of the secondary supramolecular structure into spheroids with diameters of 0.1–10 μm, has been revealed. The stages of the formation of polymer particles of various structures are described by the scheme of morphogenesis.     

反应介质对N,N-二乙基二硫代氨基甲酸苄酯引发丙烯酰胺聚合反应的影响

The effects of reaction medium (alcohol, dioxane, dioxane/alcohol)on the heterogenous polymerization of acrylamide initiated by BDC (benzyl diethyldiothiocarbate)were studied. The results showed that herterogenous polymerization differed from homogeneous solution polymerization initiated by BDCand did not have the character of living radical polymerization. The polarity of reaction medium affected the enolization of acrylamide obviously, and made the yield of polymer and molecular weight different from each other, behaving obvious solvent effects.The UVspectra of products and polymerization of acrylamide initiated by products, show that iniferter functional groups remained in products.     

大分子引发－转移－终止剂

大分子引发－转移－终止剂杨文君，李俊柏，沈家骢（青岛化工学院橡塑工程研究所，青岛，２６６０４２）（吉林大学化学系，长春，１３００２３）关键词聚苯乙烯，聚丙烯酰胺，嵌段共聚，扩链反应，引发－转移－终止剂含有二乙基二硫代氨基甲酸基的有机硫化物或大分子，在...     

Initiator‐fragment incorporation radical polymerization of divinylbenzene in the presence of glyoxylic oxime ether: Formation of soluble hyperbranched polymer

The copolymerization of divinylbenzene (DVB) and ethylstyrene (EtSt) was carried out at 70 and 80 °C in benzene with dimethyl 2,2‐azobisisobutyrate (MAIB) at high concentrations as initiator in the presence of methyl benzyloxyiminoacetate (MBOIA), a glyoxylic oxime ether, as a retarder. The copolymerization system of DVB (0.25 mol/L), EtSt (0.25 mol/L), MBOIA (0.5 mol/L), and MAIB (0.5 mol/L) gave benzene‐soluble copolymers despite a considerably high concentration of DVB as an excellent crosslinker. The yield and molecular weight of the resulting copolymers increased with time both at 70 and 80 °C and then leveled off because of initiator consumption. The homogeneous polymerization system involved electron spin resonance (ESR), observable nitrogen‐centered polymer radicals (MBOIA·) under the actual polymerization conditions. The MBOIA· concentration increased with time despite a homogeneous polymerization system, suggesting the formation of rigid hyperbranched polymers. A benzene solution of isolated copolymer also showed an ESR signal. The copolymer was soluble in acetone, toluene, chloroform, ethyl acetate, tetrahydrofuran, and N,N‐dimethylformamide but insoluble in n‐hexane, methanol, and dimethyl sulfoxide. MAIB fragments as high as 30–40 mol % were incorporated into the copolymers through initiation and primary radical termination, on the basis of which this polymerization was named the initiator‐fragment incorporation radical polymerization. MBOIA (13–16 mol%) was also incorporated into the copolymers through an opening of the C?N bond. The intrinsic viscosity of the copolymers was very low (0.08 dL/g), and the reduced viscosity was almost independent of the polymer concentration, supporting a hyperbranched structure of them. Gel permeation chromatography and multi‐angle laser light scattering and transmission electron microscopy revealed that the copolymer was formed as a hyperbranched nanoparticle. The thermal behavior of the copolymer was examined by dynamic thermogravimetry and differential scanning calorimetry. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3038–3047, 2003     

Photopolymerization of Methyl Methacrylate and other Acrylates with the Use of [Hydroxy(tosyloxy)iodo]benzene as Photoinitiator

Abstract

[Hydroxy(tosyloxy)iodo]benzene (HTIB) was found to be an effective photoinitiator for the solution polymerization of methyl methacrylate. The polymerization is strongly inhibited in the presence of hydroquinone, it is not affected by air, and it is favored in the presence of nucleophilic solvents. A kinetic study of solution polymerization in N,N-dimethylformamide indicated a free radical polymerization mechanism involving complexation of initiator molecules with the solvent prior to radical generation, and bimolecular termination of chain radicals. Methyl acrylate and 2-hydroxyethyl methacrylate were also polymerized with HTIB as photoinitiator, but styrene could not be polymerized under similar conditions.     

Synthesis of Telechelic Polystyrene by Radical Polymerization Using 1,4-Bis(p-tert-Butylphenylseleno-Methyl)benzene as a Photoiniferter

Abstract

1,4-Bis(p-tert-butylphenylselenomethyl) benzene was synthesized, and used as a bifunctional photoiniferter for the polymerization of styrene. Both the polymer yields and the number average of molecular weights (_n) of polymers increased with the polymerization. The polymerization of styrene by this iniferter permitted telechelic polystyrene containing arylseleno groups at both chain ends, and the degree of functionality was 1.9. The seleno groups of both chain ends of polystyrene were reduced quantitatively by tri-n-butyltin hydride. These seleno groups in polystyrene were also eliminated by treatment with hydrogen peroxide to give telechelic polystyrene with carbon-carbon double bond at both chain ends. Further, polystyrene with double bonds was converted to telechelic polystyrene carrying terminal functional groups as epoxy, hydroxy, and iodide group, respectively.

     

大分子引发－转移－终止剂

Polystyrene and polyacrylamide prepared by BDC (benzyl diethldithiocarbamate )could be ed as macromolecular iniferter and they initated styrene or acrylamidepolymerization further. The results shoWed that chain enlargement reaction inhomogeneous systems had the character of living radical polymerization and theprodusts still contained iniferter functional groups. Polystyrene macromoleculariniferter can initiate acrylamide polymerizahon in dioxane and thepolystyrene-- block-- polyanylamide copolymers were obtained. Blocking efficiency and polymerization activity were high.     

Syntheses of amphiphilic block copolymers. Block copolymers of methacrylic acid and p-N,N-dimethylaminostyrene

Amphiphilic block copolymers consisting of methacrylic acid (MA) sequences and p-N,N-dimethylaminostyrene (DMS) sequences were prepared by living anionic polymerization. DMS was polymerized by lithium naphthalene in tetrahydrofuran to yield a living polymer solution, to which trimethylsilyl methacrylate (TMSM) was added to allow the block copolymerization. The conversion of TMSM was dependent on the countercation, i.e., with Na⁺ as counterion, no quantitative conversion was reached owing to premature termination, whereas with Li⁺ the conversion was quantitative. The role of the counterion was discussed in some detail in connection with self-termination by the backbiting mechanism. The trimethylsilyl ester groups in the block copolymer were quantitatively hydrolyzed by treatment with aqueous methanol at room temperature, yielding MA sequences. The block copolymer of MA and DMS exhibited micellar properties in an aqueous solution.     

Elucidation of mechanism for living radical polymerization of styrene with N,N-diethyldithiocarbamate derivatives as iniferters by the use of spin trapping technique

The photodissociation of several N,N-diethyldithiocarbamate derivatives (RDC), i.e., benzyl, 1-phenylethyl, 2-phenylethyl, n-butyl, sec-, and tert-butyl N,N-diethyldithiocarbamates, was investigated by the spin trapping technique to elucidate the polymerization mechanism of styrene (St) with RDC as iniferters. The scission of RDC occured at two different C? S bonds depending on the structure of the alkyl groups of RDC and the cleavage manner was dominated by both resonance and steric effects. It has been confirmed that RDC generating an N,N-diethyldithiocarbamyl radical acts as an effective iniferter and induces the living radical polymerization of St in homogeneous system. The polymerizations of St with tetraethylthiuram disulfide and p-xylylene bis(N,N-diethyldithiocarbamate) were also discussed on the basis of the results of the spin trapping for RDC as the model compounds of the poly(St) chain ends. © 1994 John Wiley & Sons, Inc.     

Synthesis of A-B-A Type Block Copolymer of Methyl Methacrylate and Styrene by Living Free-Radical Polymerization†

Abstract

A newly synthesized iniferter, N,N′-dimethyl-N,N′-bis(phenethyl)-thiuram disulfide, has been used in the free-radical living polymerization of styrene by a photochemical method. The low molecular weight (M _w = 6000) difunctionalized polystyrene was used as a macroiniferter to photopolymerize methyl methacrylate, and was fractionated to obtain an A-B-A type block copolymer containing two poly(methyl methacrylate) units and one polystyrene unit in each block. The glass transition temperature, thermal stability, and ¹³C NMR of the block copolymer are discussed.     

Synthesis of Poly(IB‐co‐VBDC)‐g‐PMMA via Photo‐initiated Free Radical Graft Polymerization

Abstract

Photoinitiated free radical graft polymerization of methyl methacrylate (MMA) with poly[isobutene‐co‐(4‐vinyl benzyl N,N‐diethyldithiocarbamate)] [poly(IB‐co‐VBDC)] as macromolecular iniferter was investigated. The polymerization proceeds to give a high yield graft copolymer, however it was observed that even in the early stage of the polymerization there formed an insoluble polymer. In the presence of tetraethylthiuram disulfide (TETD) the gel fraction of the yield graft copolymer was drastically reduced and the polymerization was retarded as well. When the [TETD]/[VBDC] increased from 0 to 1.0, the gel fraction of the graft copolymer decreased from 33.2% to 1.6% (wt) while the fraction of the homopolymer of the MMA increased from 4.5% to 10.5% (wt). With the increasing of the UV irradiation time, both the MMA conversion and the molecular weight of the graft copolymer increased readily.     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000