Criegee自由基CH2O2与H2O反应机理及动力学的理论研究

在6-311＋G(2d,2p)水平下, 采用密度泛函理论(DFT)的B3LYP方法, 研究了Criegee 自由基CH₂O₂与H₂O的反应. 结果表明反应存在三个通道: CH₂O₂＋H₂O®HOCH₂OOH (R1); CH₂O₂＋H₂O®HCO＋OH＋H₂O (R2); CH₂O₂＋H₂O®HCHO＋H₂O₂ (R3), 各通道的势垒高度分别为43.35, 85.30和125.85 kJ/mol. 298 K下主反应通道(R1)的经典过渡态理论(TST)与变分过渡态理论(CVT)的速率常数k^TST与k^CVT均为2.47×10^－17 cm³•molecule^－1•s^－1, 而经小曲率隧道效应模型(SCT)校正后的速率常数k^CVT/SCT为 5.22×10^－17 cm³•molecule^－1•s^－1. 另外, 还给出了200～2000 K 温度范围内拟合得到的速率常数随温度变化的三参数Arrhenius方程.     

乙二胺改性轻金属铝-金属有机骨架材料用于CO2/CH4分离

胺类分子在CO₂的捕获中可以起到选择性提升的作用,本文选择小尺寸的乙二胺分子对具有不饱和金属位点的轻金属铝基金属有机骨架（Al-MOFs）材料MIL-100Al进行改性,利用XRD、N₂吸附和FT-IR等对改性材料的结构进行表征,测试了不同浓度的乙二胺改性的MIL-100Al对CO₂和CH₄吸附性能。结果表明,与原始的MIL-100Al材料相比,改性后的材料对CO₂吸附量有明显提高,CH₄的吸附量却降低,从而进一步提高了材料的CO₂/CH₄吸附选择性,提升了吸附分离的效果。     

CCl2与CH2O插入反应机理及热力学与动力学特性的理论研究

采用密度泛函B3LYP/6-311G*和高级电子相关耦合簇[CCSD(T)/6-311G*]方法计算研究了CCl₂与CH₂O的插入反应机理, 全参数优化了反应势能面各驻点的几何构型, 用内禀反应坐标(IRC)和频率分析方法, 对过渡态进行了验证. 研究结果表明: 反应(1)是单重态二氯卡宾与甲醛插入反应的主反应通道. 该反应由两步组成: (i)两反应物首先经一无能垒的放热反应, 放出9.73 kJ•mol^－1的热量, 生成一中间体IM1, (ii)中间体IM1经一过渡态TS1, 发生H的转移, 生成产物P1, 其势垒为47.32 kJ•mol^－1. 用RRKM-TST理论计算了300～1900 K温度范围内反应(1)的压力效应. 用经Wigner校正的Eyring过渡态理论研究了不同温度下该反应的热力学和动力学性质. 从热力学和动力学角度综合分析, 在高压限101325 Pa下, 该反应进行的适宜温度范围为400～1800 K, 如此, 反应既有较大的自发趋势和平衡常数, 又具有较快的反应速率.     

废水生物脱氮工艺中N2O排放数学模型研究进展

N_2O是一种重要的温室气体,而污水生物脱氮处理过程是N_2O的潜在产生源之一。随着污水处理量和处理程度的不断提高,N_2O的排放量也将不断增大。建立N_2O排放数学模型对污水生物脱氮系统中N_2O生成机制的深入研究和污水处理行业N_2O削减工艺技术的开发具有重大的理论及实践意义。本文归纳了生物脱氮工艺的原理,系统阐述了生物脱氮工艺中N_2O的生成机理和排放数学模型的类型、建立方法及应用情况。在此基础上,对生物脱氮工艺中N_2O排放数学模型的研究现状和研究方向进行了总结和展望,以期为N_2O排放数学模型的完善、N_2O排放量的削减、污水生物脱氮工艺的优化及污水处理行业的可持续发展提供理论基础和科学依据。     

Z型Ag-Cu2O/BiVO4光催化剂的光催化还原CO2性能

利用简单的化学还原沉积法将Cu₂O纳米球和Ag纳米颗粒均匀包裹在十面体BiVO₄表面,成功构建了一种具有高效电荷载流子分离/转移特性的Z型异质结光催化剂Ag-Cu₂O/BiVO₄。Ag-Cu₂O/BiVO₄在可见光下光催化CO₂还原为CO的产率可达5.37 μmol·g^-1·h^-1,分别是纯BiVO₄和Cu₂O的35.8倍和6.25倍。通过X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线能谱(EDS)、紫外可见漫反射光谱(UV-Vis DRS)、光致发光(PL)光谱、瞬态光电流响应(TPC)和电化学阻抗谱(EIS)对Ag-Cu₂O/BiVO₄的晶体结构、形貌、组成、能带结构和吸光能力等进行了系统表征分析,并提出了其光催化体系还原CO₂的催化机理。     

Z型Ag-Cu2O/BiVO4光催化剂的光催化还原CO2性能

利用简单的化学还原沉积法将 Cu₂O纳米球和 Ag纳米颗粒均匀包裹在十面体 BiVO₄表面,成功构建了一种具有高效电荷载流子分离/转移特性的Z型异质结光催化剂Ag-Cu₂O/BiVO₄。Ag-Cu₂O/BiVO₄在可见光下光催化CO₂还原为CO的产率可达5.37 μmol·g^-1·h^-1,分别是纯 BiVO₄和 Cu₂O的 35.80倍和 6.30倍。通过 X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、X射线能谱(EDS)、紫外可见漫反射光谱(UV-Vis DRS)、光致发光(PL)光谱、瞬态光电流响应(TPC)和电化学阻抗谱(EIS)对 Ag-Cu₂O/BiVO₄的晶体结构、形貌、组成、能带结构和吸光能力等进行了系统表征分析,并提出了其光催化体系还原CO₂的催化机理。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

锂参与合成MOF-5用于CO2/CH4混合气体分离

利用溶剂热法合成了不同锂含量的MOF-5(xLi-MOF-5, x=0, 1, 3, 5).在MOF-5结晶过程中,锂离子被合并入其骨架结构中.实验表明,合并入骨架的锂能够改变MOF-5的结构和表面化学性质.不同的xLi-MOF-5能够不同程度降低骨架相互穿插的程度从而导致其吸附分离能力的大幅改变.其中,3Li-MOF-5具有最高的二氧化碳捕获能力(5.47 mmol·g^-1),对40% CO₂/60% CH₄混合气体具有最优吸附选择性.     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

制备工艺对NiFe2O4分解CO2活性的影响

随着大气中CO2浓度的增加,温室效应日趋严重,促使人们对大气中CO2的转化与消除这一课题更加重视。1990年Yutaka Tamaura[1]发现氧缺位磁铁矿几乎可以100%分解CO2后,为解决温室效应提供了一条新的探索途径。通过对不同铁酸盐MFe2O4(M=Fe,Mn[2],Co[3],Zn[4],Ni[5]等)分解CO2活性的考察,发现铁酸镍在300℃分解CO2的活性比其它铁酸盐都好。NiFe2O4的制备最常采用的是共沉淀法、柠檬酸溶胶凝胶法和水热法,3种方法由于制备     

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified B-zeolite

A new type of composite adsorbents was synthesized by incorporating monoethanol amine (MEA) into β-zeolite. The parent and MEA-functionalized β-zeolites were characterized by X-ray diffraction (XRD), N₂ adsorption, and thermogravimetric analysis (TGA). The adsorption behavior of carbon dioxide (CO₂), methane (CH₄), and nitrogen (N₂) on these adsorbents was investigated at 303 K. The results show that the structure of zeolite was well preserved after MEA modification. In comparison with CH₄ and N₂, CO₂ was preferentially adsorbed on the adsorbents investigated. The introduction of MEA significantly improved the selectivity of both CO₂/CH₄ and CO₂/N₂, the optimal selectivity of CO₂/CH₄ can reach 7.70 on 40 wt% of MEA-functionalized β-zeolite (MEA(40)-β) at 1 atm. It is worth noticing that a very high selectivity of CO₂/N₂ of 25.67 was obtained on MEA(40)-β. Steric effect and chemical adsorbate-adsorbent interaction were responsible for such high adsorption selectivity of CO₂. The present MEA-functionalized β-zeolite adsorbents may be a good candidate for applications in flue gas separation, as well as natural gas and landfill gas purifications.     

Adsorption separation of carbon dioxide,methane, and nitrogen on Hβ and Na-exchanged β-zeolite

Adsorption isotherms of carbon dioxide （CO2）, methane （CH4）, and nitrogen （N2） on Hβand sodium exchanged β-zeolite （Naβ） were volumetrically measured at 273 and 303 K. The results show that all isotherms were of Brunauer type I and well correlated with Langmuir-Freundlich model. After sodium ions exchange, the adsorption amounts of three adsorbates increased, while the increase magnitude of CO2 adsorption capacity was much higher than that of CH4 and N2. The selectivities of CO2 over CH4 and CO2 over N2 enhanced after sodium exchange. Also, the initial heat of adsorption data implied a stronger interaction of CO2 molecules with Na＋ ions in Naβ . These results can be attributed to the larger electrostatic interaction of CO2 with extraframework cations in zeolites. However, Naβ showed a decrease in the selectivity of CH4 over N2, which can be ascribed to the moderate affinity of N2 with Naβ. The variation of isosteric heats of adsorption as a function of loading indicates that the adsorption of CO2 in Naβ presents an energetically heterogeneous profile. On the contrary, the adsorption of CH4 was found to be essentially homogeneous, which suggests the dispersion interaction between CH4 and lattice oxygen atoms, and such interaction does not depend on the exchangeable cations of zeolite.     

Methane and nitrous oxide concentration and emission flux of Yangtze Delta plain river net

Methane (CH4) and nitrous oxide (N2O) saturation concentration and gas-water interface emission flux in surface water of the Yangtze Delta plain river net were investigated in summer at representative sites including the upper reaches of the Huangpu River and the rivers in the Chongming Island. The results show that the CH4 concentration in river water ranged from 0.30±0.03 to 6.66±0.14 μmol.L-1, and N2O concentration ranged from 13.8±2.33 to 435±116 nmol.L-1. River surface water had a very high satura- tio...     

Short Communication: Diffusion of Simple Molecules in 4A Zeolite

Recently reported diffusivity data for N₂, CH₄ and Kr in 4A zeolite pelleted adsorbent are compared with earlier data for the same sorbates in several different 4A samples. It is shown that, although there are large differences in diffusivity between the different adsorbent samples the activation energies are essentially constant. The data can be reconciled if it is assumed that the samples contain different fractions of open windows as a result of non-ideal distribution of the Na⁺ cations.     

PAN-based activated carbon nanofiber/metal oxide composites for CO2 and CH4 adsorption: influence of metal oxide

In the present study, we successfully prepared two different electrospun polyacrylonitrile (PAN) based-activated carbon nanofiber (ACNF) composites by incorporation of well-distributed Fe₂O₃ and Co₃O₄ nanoparticles (NPs). The influence of metal oxide on the structural, morphological, and textural properties of final composites was thoroughly investigated. The results showed that the morphological and textural properties could be easily tuned by changing the metal oxide NPs. Even though, the ACNF composites were not chemically activated by any activation agent, they presented relatively high surface areas (S_BET) calculated by Brunauer–Emmett–Teller (BET) equation as 212.21 and 185.12 m²/g for ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites, respectively. Furthermore, the ACNF composites were utilized as candidate adsorbents for CO₂ and CH₄ adsorption. The ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites resulted the highest CO₂ adsorption capacities of 1.502 and 2.166 mmol/g at 0 °C, respectively, whereas the highest CH₄ adsorption capacities were obtained to be 0.516 and 0.661 mmol/g at 0 °C by ACNF/Fe₂O₃ and ACNF/Co₃O₄ composites, respectively. The isosteric heats calculated lower than 80 kJ/mol showed that the adsorption processes of CO₂ and CH₄ were mainly dominated by physical adsorption for both ACNF composites. Our findings indicated that ACNF-metal oxide composites are useful materials for designing of CO₂ and CH₄ adsorption systems.     

Catalytic Reduction of Dinitrogen Monoxide with Methane Over Metal Zeolite Catalysts

Pronounced activities on the reduction of N₂O with CH₄ were observed over Fe-ZSM-5, Pd-ZSM-5, and Pt-ZSM-5 catalysts, respectively. No significant deactivation has been detected over Fe-ZSM-5 in the presence of oxygen.     

Deposition of Diamondlike Carbon Film and Mass Spectrometry Measurement in CH4/N2 RF Plasma

The deposition of diamondlike carbon (DLC) film and the measurements of ionic species by means of mass spectrometry were carried out in a CH₄/N₂ RF (13.56 MHz) plasma at 0.1 Torr. The film deposition rate greatly depended on both CH₄/N₂ composition ratio and RF power input. It was decreased monotonically as CH₄ content decreased in the plasma and then rapidly diminished to negligible amounts at a critical CH₄ content, which became large for higher RF power. The rate increased with increasing RF power, reaching a maximum value in 40% CH₄ plasma. The predominant ionic products in CH₄/N₂ plasma were NH⁺ ₄ and CH₄N⁺ ions, which were produced by reactions of hydrocarbon ions, such as CH⁺ ₃, CH⁺ ₂, CH⁺ ₅, and C₂H⁺ ₅ with NH₃ molecules in the plasma. It was speculated that the production of NH⁺ ₄ ion induced the decrease of C₂H⁺ ₅ ion density in the plasma, which caused a reduction in higher hydrocarbon ions densities and, accordingly, in film deposition rate. The N⁺ ₂ ion sputtering also plays a major role in a reduction of film deposition rate for relatively large RF powers. The incorporation of nitrogen atoms into the bonding network of the DLC film deposited was greatly suppressed at present gas pressure conditions.     

Effects of UV-irradiation on the formation of oxide thin films from chemically modified metal-alkoxides

The effects of UV-irradiation on the properties of ZrO₂ and TiO₂ gel films prepared from corresponding metal-butoxides modified with acetylacetone (AcAc) or benzoylacetone (BzAc) have been studied. It was found that the chelate bonds of -diketones remaining in the gel films were dissociated by the UV-irradiation. The UV-irradiation also changed the properties of the gel films such as solubility; the solubility in acidic solutions was decreased for ZrO₂ gel films modified with AcAc and TiO₂ gel films modified with BzAc became insoluble in alcohol. Based on these findings, a new fine-patterning process has been established, which enables us to make fine-patterns of ZrO₂ and TiO₂ films on a variety of substrates.     

Vibrational frequencies and force constants of N2O4 in complexes with molecules of different solvents determined by Raman spectra andAb initio calculation

The Raman spectra of N₂O₄ solutions in organic solvents have been recorded. The frequencies ofv ₁,v ₂, andv ₃ bands of N₂O₄ increase with increasing solvent electron-donor properties. Especially large changes ofv ₃ N-N stretching band have been observed (254.5 cm^–1 in n-hexane, 276.5 cm^–1 in 1,4-dioxane). The ab initio calculations have shown that the interaction between N₂O₄ and electron-donor molecules causes an increase of N-N and N-O stretching and O-N-O bending force constants of N₂O₄ in agreement with the results of Raman study.     

Effect of NO, SO2, and O2 on the conversion of nitrous oxide on iron-containing zeolite catalysts

Conditions were found for facilitation of the conversion of nitrous oxide in the presence of Fe-containing zeolite catalysts by oxidants (NO, SO₂, and O₂). The results were interpreted in the framework of a mechanism involving decomposition of N₂O. The effect of NO_x on the reduction of nitrous oxide by C₃-C₄ alkanes was established. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 241–245, July–August, 2006.