The mechanism of epoxide carbonylation by [Lewis Acid]+[Co(CO)4]- catalysts

A detailed mechanistic investigation of epoxide carbonylation by the catalyst [(salph)Al(THF)2]+ [Co(CO)4]- (1, salph = N,N'-o-phenylenebis(3,5-di-tert-butylsalicylideneimine), THF = tetrahydrofuran) is reported. When the carbonylation of 1,2-epoxybutane (EB) to beta-valerolactone is performed in 1,2-dimethoxyethane solution, the reaction rate is independent of the epoxide concentration and the carbon monoxide pressure but first order in 1. The rate of lactone formation varies considerably in different solvents and depends primarily on the coordinating ability of the solvent. In mixtures of THF and cis/trans-2,5-dimethyltetrahydrofuran, the reaction is first order in THF. From spectroscopic and kinetic data, the catalyst resting state was assigned to be the neutral (beta-aluminoxy)acylcobalt species (salph)AlOCH(Et)CH2COCo(CO)4 (3a), which was successfully trapped with isocyanates. As the formation of 3a from EB, CO, and 1 is rapid, lactone ring closing is rate-determining. The favorable impact of donating solvents was attributed to the necessity of stabilizing the aluminum cation formed upon generation of the lactone.     

Synthesis of beta-lactones: a highly active and selective catalyst for epoxide carbonylation

A new highly active and selective catalyst for the synthesis of beta-lactones from CO and epoxides is reported. The catalyst, [(N,N'-bis(3,5-di-tert-butylsalicylidene) phenylenediamino)Al(THF)2][Co(CO)4] ([(salph)Al(THF)2][Co(CO)4]) is easily prepared from the corresponding (salph)AlCl and NaCo(CO)4. At 50 degrees C and 880 psi of CO, the catalyst (1 mol %) carbonylates epoxides such as propylene oxide, 1-butene oxide, epichlorohydrin, and isobutylene oxide to the lactones beta-butyrolactone, beta-valerolactone, gamma-chloro-beta-butyrolactone, and beta-methyl-beta-butyrolactone in high yield. (R)-Propylene oxide was carbonylated to (R)-beta-butyrolactone with retention of stereochemistry.     

Versatile synthesis of quaternary 1,3-oxazolidine-2,4-diones and their use in the preparation of α-hydroxyamides

A new approach to the synthesis of 1,3-oxazolidine-2,4-diones, via a two-step reaction sequence, starting from the readily available α-ketols and isocyanates, is reported. The condensation of the latter led to the key precursors 4-methylene-2-oxazolidinones, which are converted into the diones by an oxidative cleavage of the exocyclic double bond. Thus, 5,5-disubstituted 1,3-oxazolidine-2,4-diones can be accessed in good yields from the appropriate functionalized α-ketols. Moreover, two alternative routes are also described either by functionalization of 4-oxazolin-2-ones or by alkylation of the 1,3-oxazolidine-2,4-dione core previously prepared. Upon hydrolysis of the 1,3-oxazolidine-2,4-diones, a series of α-hydroxyamides bearing a quaternary stereocenter were obtained.     

Reaction of 1,3-thiazolidine-4-carboxylic and 1,4-tetrahydro-thiazine-3-carboxylic acid esters with isocyanates and isothiocyanates and structures of the reaction products

7-Thia-1,3-diazabicyclo[3.3.0]octane-2,4-diones and 7-thia-1,3-diazabicyclo[4.3.0]-nonane-2, 4-diones, as well as their thio analogs, were obtained by the reaction of (S)-1,3-thiazolidine-4-carboxylic and 1,4-tetrahydrothiazine-3-carboxylic acid esters with isocyanates and isothiocyanates. Intermediate reaction products, viz., heterocyclic derivatives of urea, were isolated. The three-dimensional structures of the 3-methyl-4-oxo-7-thia-1,3-diazabicyclo[3.3.0]octane-2-thione and 3-methyl-4-oxo-7-thia-1, 3-diazabicyclo[4.3.0]nonane-2-thione molecules were determined by x-ray diffraction analysis.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1327–1332, October, 1985.     

Chromium(III) octaethylporphyrinato tetracarbonylcobaltate: a highly active, selective, and versatile catalyst for epoxide carbonylation

The development of a highly active and selective porphyrin-based epoxide carbonylation catalyst, [(OEP)Cr(THF)2][Co(CO)4] (1; OEP = octaethylporphyrinato; THF = tetrahydrofuran), is detailed. Complex 1 is a separated ion pair composed of a tetracarbonylcobaltate anion and an octahedral chromium porphyrin complex axially ligated by two THF ligands. Regarding the carbonylation of epoxides to beta-lactones, catalyst 1 exhibits excellent turnover numbers (up to 10,000) and turnover frequencies (up to 1670 h(-1)), with regioselective carbonyl insertion occurring between the oxygen and the sterically less hindered carbon of the epoxide substrate. Complex 1 is highly tolerant of nonprotic functional groups, carbonylating an array of aliphatic and cycloaliphatic epoxides, as well as epoxides with pendant ethers, esters, and amides. With careful control of reaction conditions in the carbonylation of glycidyl esters, the exclusive production of either the beta- or gamma-lactone isomer was achieved. Through analysis of reaction stereochemistry, a mechanism for the formation of gamma-lactone products was proposed. Overall, a broad array of synthetically useful lactones has been synthesized in a rapid and selective fashion by catalytic carbonylation using [(OEP)Cr(THF)2][Co(CO)4].     

Preparation of some perhydrothiazolo[3,2-a] [1,3,5] triazine-2,4-diones

2-Dialkylamino-δ²-thiazolines were found to react with aryl isocyanates to give 1,3-diaryl-8a-dialkylaminoperhydrothiazolo[3,2-a ] [ 1,3,5]triazine-2,4-diones (IIa-c), while p-toluenesulphonyl isocyanate gave a 1:1 adduct (VII). No reaction was observed with alkyl or aryl isothiocyanates.     

Synthesis of 3-aryl-3a-phenylindano[2,1-d]-oxazolidine-2,4-diones

2-Phenylindan-1,3-dione reacts with aryl isocyanates in benzene in the presence of catalytic amounts of triethylamine with the formation of 3-aryl -3a-phenylindano-[2,1-d]oxazolidine-2,4-diones. In pyridine, this reaction leads to 2-arylcarbamoyl-2-phenylindan-1,3-dione.Translated from Khimiya Geterotsklicheskikh Soedinenii, No. 5, pp. 612–615, May, 1985.     

Formation of carbon-carbon single bonds from isocyanates and cyclic pentaoxyphosphoranes—VI : Synthesis of 4-oxazolones and 4-thiazolones,and a new type of chapman rearrangement

The reaction of 4,5-dimethyl-2,2,2-trimethoxy-2,2-dihydro-1,3,2-dioxaphospholene with carbomethoxy, carbopropoxy and N,N-diphenylcarbamyl isocyanates yields, respectively, 2-methoxy-, 2-propoxy- and 2- diphenylamino-5-acetyl-5-methyl-2-oxazolin-4-one. The reaction with carbophenoxy isocyanate gives two products in a proportion which depends on experimental conditions: 2-phenoxy-5-acetyl-5-methyl-2-oxalin-4-one (1:1 stoichiometry) and 1,3-dicarbophenoxy-5-acetyl-5-methyl-hydantoin (1:2 stoichiometry). The 2-substituted 4- oxazolones are hydrolyzed to 5-acetyl-5-methyl-oxazolidin-2,4-dione. The alkyl group of the 2-alkoxy-4-oxazolones migrates to the adjacent nitrogen to give 3-alkyl-5-acetyl-5-methyl-oxazolidin-2,4-diones. The dioxaphospholene reacts with 2-substituted 2-thiazolin-4,5-diones to give 2-substituted 5-acetyl-5-methyl-2-thiazolin-4-ones, including rhodanine derivatives.     

[1,3,5]Triazino[1,2-a] azepines: A new ring system

The reaction of 2-pyrrolidino-1-aza-1-cycloheptene with aryl isocyanates leads, via 1,4-dipolar cycloaddition, to 1,3-diaryl-10a-pyrrolidinoperhydro[1,3,5]triazino[1,2-a]azepine-2,4-diones. The reaction provides a facile route to the novel [1,3,5]triazino[1,2-a]azepine ring system.     

Heterocyclization of functionalized heterocumulenes with C,N-, C,O-, and C,S-binucleophiles: VIII. Synthesis of pyrano(chromeno)[3,4-e][1,3]oxazines by condensation of 1-chloroalkyl isocyanates with 4-hydroxy-6-methylpyran-2-one and 4-hydroxycoumarin

1-Chlorobenzyl isocyanates react with 4-hydroxy-6-methylpyran-2-one and 4-hydroxycoumarin forming 4-aryl-3,4-dihydro-2H,5H-pyrano(chromeno)[3,4-e][1,3]oxazine-2,5-diones. The reaction of 1-aryl-2,2,2-trifluoro-1-chloroethyl isocyanates with the above substrates gives rise to structurally isomeric 2-aryl-2-trifluoromethyl-2,3-dihydro-2H,5H-pyrano(chromeno)[3,4-e][1,3]-oxazine-4,5-diones.     

Synthesis of derivatives of 4-alkylthiouracil,cytosine, pyrido[2,3-d]pyrimidine,and pyrimido[4,5-d]pyrimidine from the N,S- and N,N-acetals of diacetylketene and isocyanates

The action of alkyl and aryl isocyanates on the N,S-acetals of diacetylketene leads to the formation of 4-alkylthio-5-acetyl-1-alkyl(aryl)-6-methyl-1H-pyrimidin-2-ones (derivatives of 4-alkylthiouracils). The reaction of the synthesized thiouracils with amines or the reaction of the N,N-acetals of diacetylketene (N,N-ADK) with an equi-molar amount of aryl isocyanates leads to the formation of substituted 4-amino-5-acetyl-1H-pyrimidin-2-ones (derivatives of cytosine). From the latter and isocyanates or directly from N,N-ADK and an excess of the isocyanate, derivatives of 4-methylene-1H,3H, 4H-pyrimido[4,5-d]pyrimidine-2,7-dione were obtained. The exception was the condensation of 3-[N-(4,6-dimethyl-2-pyrimidinyl)diaminomethylene]pentane-2,4-dione with aryl isocyanates, which led to 3H,8H-pyrido[2,3-d]pyrimidine-2,5-diones.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2593–2599, November, 1991.     

[HCo(CO)4]‐Catalyzed Three‐component Cycloaddition of Epoxides,Imines, and Carbon Monoxide: Facile Construction of 1,3‐Oxazinan‐4‐ones

The three‐component [3+2+1] cycloaddition of epoxides, imines, and carbon monoxide to produce 1,3‐oxazinan‐4‐ones has been developed by using [HCo(CO)₄] as the catalyst. The reaction occurs for a wide variety of imines and epoxides, under 60 bar of CO pressure at 50 °C, to produce 1,3‐oxazinan‐4‐ones with different substitution patterns in high yields, and provides an efficient and atom‐economic route to heterocycles from simple and readily available starting materials. A plausible mechanism involves [HCo(CO)₄]‐induced ring‐opening of the epoxide, followed by sequential addition of carbon monoxide and the imine, and then ring closure to form the product accompanied by regeneration of [HCo(CO)₄].     

Palladium-catalyzed cyclization reactions of 2-vinylthiiranes with heterocumulenes. Regioselective and enantioselective formation of thiazolidine, oxathiolane, and dithiolane derivatives

The first palladium-catalyzed ring-expansion reaction of 2-vinylthiiranes with heterocumulenes to form sulfur-containing five-membered-ring heterocycles is described. This regioselective reaction requires 5 mol % of Pd(2)(dba)(3).CHCl(3) and 10 mol % of bidendate phosphine ligand (dppp, BINAP), at 50-80 degrees C, in THF. The reaction of 2-vinylthiiranes with carbodiimides, isocyanates, and ketenimines affords 1,3-thiazolidine derivatives, whereas the reaction with diphenylketene or isothiocyanates results in the formation of 1,3-oxathiolane or 1,3-dithiolane compounds in good to excellent isolated yields and in up to 78% ee.     

[HCo(CO)4]‐Catalyzed Three‐component Cycloaddition of Epoxides,Imines, and Carbon Monoxide: Facile Construction of 1,3‐Oxazinan‐4‐ones

The three‐component [3+2+1] cycloaddition of epoxides, imines, and carbon monoxide to produce 1,3‐oxazinan‐4‐ones has been developed by using [HCo(CO)₄] as the catalyst. The reaction occurs for a wide variety of imines and epoxides, under 60 bar of CO pressure at 50 °C, to produce 1,3‐oxazinan‐4‐ones with different substitution patterns in high yields, and provides an efficient and atom‐economic route to heterocycles from simple and readily available starting materials. A plausible mechanism involves [HCo(CO)₄]‐induced ring‐opening of the epoxide, followed by sequential addition of carbon monoxide and the imine, and then ring closure to form the product accompanied by regeneration of [HCo(CO)₄].     

An expedient approach for the synthesis of dispiropyrrolidine bisoxindoles, spiropyrrolidine oxindoles and spiroindane-1,3-diones through 1,3-dipolar cycloaddition reactions

A series of dispiropyrrolidine bisoxindoles were synthesized via a multicomponent 1,3-dipolar cycloaddition reaction of isatin, sarcosine and isatylidene malononitrile in refluxing methanol. Also a series of spiropyrrolidine oxindoles and spiroindane-1,3-diones were synthesized using 2-(1H-Indole-3-carbonyl)-3-phenyl-acrylonitrile and 2-(1,3-dioxo-indan-2-ylidene)-malononitrile as dipolarophiles, respectively.     

Preparative synthesis of ethyl 5-acyl-4-pyrone-2-carboxylates and 6-aryl-, 6-alkyl-, and 5-acylcomanic acids on their basis

A simple and efficient method for the synthesis of ethyl 5-alkanoyl- and 5-aroyl-4-pyrone-2-carboxylates was developed, which is based on the condensation of 1-R-2-(dimethyl-aminomethylidene)butane-1,3-diones, obtained from 1,3-diketones and dimethylformamide dimethyl acetal, with diethyl oxalate in the presence of NaH in THF. Ethyl 5-acyl-4-pyrone-2-carboxylates were used in the synthesis of 6-R- and 5-RCO-comanic acids.     

Synthesis of isocyanates and carbodiimides

The reaction of 1,3-disubstituted ureas and 1-arylsulfonyl-3-alkylureas with phosgene permits the preparation of a number of isocyanates and sulfonyl isocyanates that had not previously been described, or that were difficult to prepare. 1,3-Disubstituted thioureas and 1-aryl-(or alkyl)sulfonyl-3-alkylthioureas give carbodiimides. Thionyl chloride and phosphorus pentachloride react with the urea derivatives in the same way as phosgene. Oxalyl chloride reacts with ureas to form parabanic acid derivatives, whereas with thiourea it gives 2-imino-1,3-thiazolidine-4,5-diones, which can isomerize to parabanic acid derivatives.     

One-pot multistep synthesis of 4-acetoxy-2-amino-3-arylbenzofurans from 1-aryl-2-nitroethylenes and cyclohexane-1,3-diones

[reaction: see text] A novel method for synthesizing 4-acetoxy-2-amino-3-arylbenzofurans (4) from 1-aryl-2-nitroethylenes (1) and cyclohexane-1,3-diones (2) is described. The method features one-pot operation of a solution of 1 and 2 in THF with catalytic Et3N (rt, 12 h) followed with Ac2O, Et3N, and DMAP (rt, 5 h), although the process consists of 13 elementary reactions.     

Catalytic double carbonylation of epoxides to succinic anhydrides: catalyst discovery, reaction scope, and mechanism

The first catalytic method for the efficient conversion of epoxides to succinic anhydrides via one-pot double carbonylation is reported. This reaction occurs in two stages: first, the epoxide is carbonylated to a beta-lactone, and then the beta-lactone is subsequently carbonylated to a succinic anhydride. This reaction is made possible by the bimetallic catalyst [(ClTPP)Al(THF)2]+[Co(CO)4]- (1; ClTPP = meso-tetra(4-chlorophenyl)porphyrinato; THF = tetrahydrofuran), which is highly active and selective for both epoxide and lactone carbonylation, and by the identification of a solvent that facilitates both stages. The catalysis is compatible with substituted epoxides having aliphatic, aromatic, alkene, ether, ester, alcohol, nitrile, and amide functional groups. Disubstituted and enantiomerically pure anhydrides are synthesized from epoxides with excellent retention of stereochemical purity. The mechanism of epoxide double carbonylation with 1 was investigated by in situ IR spectroscopy, which reveals that the two carbonylation stages are sequential and non-overlapping, such that epoxide carbonylation goes to completion before any of the intermediate beta-lactone is consumed. The rates of both epoxide and lactone carbonylation are independent of carbon monoxide pressure and are first-order in the concentration of 1. The stages differ in that the rate of epoxide carbonylation is independent of substrate concentration and first-order in donor solvent, whereas the rate of lactone carbonylation is first-order in lactone and inversely dependent on the concentration of donor solvent. The opposite solvent effects and substrate order for these two stages are rationalized in terms of different resting states and rate-determining steps for each carbonylation reaction.     

Pyrimidine derivatives and related compounds. 38. Synthesis of 1,3-oxazine-2,4-diones and their reaction with nucleophiles. Ring transformation of 1,3-oxazines to pyrimidines

5,6-Unsubstituted 1,3-oxazine-2,4-diones ( 3 ) and 6-unsubstituted 5-methyl-1,3-oxazine-2,4-diones ( 4 ) were prepared by reduction of the corresponding 6-chloro derivatives ( 1 and 2 ). Treatment of 6-chloro-3-methyl-1,3-oxazine-2,4-dione ( 1a ) with sodium azide, sodium cyanide, secondary amines and aniline gave the corresponding 6-substituted compounds ( 7, 9, 10 and 11 ) while the reaction of 1a and 2a,b with primary aliphatic amines such as methylamine and ethylamine caused a ring transformation to pyrimidine ring system giving barbituric acids ( 13a-d ).