Determination of Epinephrine in Pharmaceutical Formulation by an Optimized Novel Luminescence Method Using CdS Quantum Dots as Sensitizer

In this article, a novel chemiluminescence method using water-soluble CdS quantum dots (QDs) as sensitizers is proposed for the chemiluminometric determination of epinephrine. The method is based on the quenching effect of epinephrine on the chemiluminescence emission generated by the mixing of CdS quantum dots (QDs) with hydrogen carbonate (HCO₃ ^-) in the presence of hydrogen peroxide (H₂O₂) in an alkaline medium. The optimization of variables influencing the chemiluminescence response of the method has been carried out by using experimental design. Under the optimal conditions, there is good linear relationship between the relative chemiluminescence intensity and the concentration of epinephrine over the range of 5?×?10^?9–1?×?10^?6?molL^?1 with a 3σ detection limit of 5?×?10^?11?molL^?1. The method has been successfully applied to the determination of epinephrine in pharmaceutical formulation and the recovery test was done in human urine.     

A Novel Fluorimetric Bulk Optode Membrane Based on NOS Tridentate Schiff Base for Selective Optical Sensing of Al<Superscript>3+</Superscript> Ions

A novel fluorimetric optode has been developed for the highly selective and sensitive for the determination of ultra trace amounts of Al³⁺ ions. The proposed fluorescent optode is based on the incorporation of a simple and effective fluorescent sensor tridentate NOS Schiff base N-(2-hydroxynaphthylidene)-2-aminothiophenol (H₂L) in a plasticized PVC containing KTpClPB as a lipophilic anionic additive. H₂L was synthesized by a facile one-step Schiff base reaction. The plasticized PVC-membrane displays a calibration response for Al³⁺ ions over a wide concentration range from 1.0 × 10^?9 to 4.4 × 10^?3 mol/L. The fluorescence signal of the optode membrane can be easily recovered by immersion in 0.01 M EDTA. In addition to high stability and reproducibility, the sensor shows a unique selectivity towards Al³⁺ ion with respect to common co-existing cations, particularly Ga³⁺and In³⁺. The proposed optode was applied successfully for determination of Al³⁺ in some real samples, including bottled drinking waters, bottled mineral waters and soft drinks.     

Green electrolytes based on dextran-chitosan blend and the effect of NH<Subscript>4</Subscript>SCN as proton provider on the electrical response studies

Dextran-chitosan blend added with ammonium thiocyanate (NH₄SCN)-based solid polymer electrolytes are prepared by solution cast method. The interaction between the components of the electrolyte is verified by Fourier transform infrared (FTIR) analysis. The blend of 40 wt% dextran-60 wt% chitosan is found to be the most amorphous ratio. The room temperature conductivity of undoped 40 wt% dextran-60 wt% chitosan blend film is identified to be (3.84?±?0.97)?×?10^?10 S cm^?1. The inclusion of 40 wt.% NH₄SCN to the polymer blend has optimized the room temperature conductivity up (1.28?±?0.43)?×?10^?4 S cm^?1. Result from X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analysis shows that the electrolyte with the highest conductivity value has the lowest degree of crystallinity (χ _c) and the glass transition temperature (T _g), respectively. Temperature-dependence of conductivity follows Arrhenius theory. From transport analysis, the conductivity is noticed to be influenced by the mobility (μ) and number density (n) of ions. Conductivity trend is further verified by field emission scanning electron microscopy (FESEM) and dielectric results.     

Conductivity studies of plasticized proton conducting PVA–PVIM blend doped with NH4BF4

The proton conducting solid-state polymer electrolyte comprising blend of poly(vinyl alcohol) (PVA) and poly(N-vinylimidazole) (PVIM), ammonium tetrafluoroborate (NH₄BF₄) as salt, and polyethylene glycol (PEG) (molecular weight 300 and 600) as plasticizer is prepared at various compositions by solution cast technique. The prepared films are characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy analysis. The conductivity–temperature plots are found to follow an Arrhenius nature. The conductivity of solid polymer electrolytes is found to depend on salt and plasticizer content and also on the dielectric constant value and molecular weight of the plasticizer. Maximum ionic conductivity values of 2.20?×?10^?4 and 1.28?×?10^?4?S?cm^?1 at 30 °C are obtained for the system (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300 and (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300, respectively. The blended polymer, complexed with salt and plasticizer, is shown to be a predominantly ionic conductor. The proton transport in the system may be expected to follow Grotthuss-type mechanism.     

Synthesis,Spectral Characterization,DNA Binding Studies and Antimicrobial Activity of Co(II), Ni(II), Zn(II), Fe(III) and VO(IV) Complexes with 4-Aminoantipyrine Schiff Base of Ortho-Vanillin

A series of transition metal complexes of Co(II), Ni(II), Zn(II), Fe(III) and VO(IV) have been synthesized involving the Schiff base, 2,3-dimethyl-1-phenyl-4-(2-hydroxy-3-methoxy benzylideneamino)-pyrazol-5-one(L), obtained by condensation of 4-aminoantipyrine with 3-methoxy salicylaldehyde. Structural features were obtained from their FT-IR, UV–vis, NMR, ESI Mass, elemental analysis, magnetic moments, molar conductivity and thermal analysis studies. The Schiff base acts as a monovalent bidentate ligand, coordinating through the azomethine nitrogen and phenolic oxygen atom. Based on elemental and spectral studies six coordinated geometry is assigned to Co(II), Ni(II), Fe(III) and VO(IV) complexes and four coordinated geometry is assigned to Zn(II) complex. The interaction of metal complexes with Calf thymus DNA were carried out by UV–VIS titrations, fluorescence spectroscopy and viscosity measurements. The binding constants (K_b) of the complexes were determined as 5?×?10⁵ M^?1 for Co(II) complex, 1.33?×?10⁴ M^?1 for Ni(II) complex, 3.33?×?10⁵ M^?1 for Zn(II) complex, 1.25?×?10⁵ M^?1 for Fe(III) complex and 8?×?10⁵ M^?1 for VO(IV) complex. Quenching studies of the complexes indicate that these complexes strongly bind to DNA. Viscosity measurements indicate the binding mode of complexes with CT DNA by intercalation through groove. The ligand and it’s metal complexes were screened for their antimicrobial activity against bacteria. The results showed the metal complexes to be biologically active, while the ligand to be inactive.     

Validated HPLC-Fl Method for the Analysis of S-Adenosylmethionine and S-Adenosylhomocysteine Biomarkers in Human Blood

The natural methyl donor group, S-adenosylmethionine and its product, S-adenosylhomocysteine play an important role in many biochemical reactions involving transmethylation reactions. These compounds can be used as biomarkers in incipient diagnosis of various pathological disorders therefore the validation of a suitable method to routinely analysis of these compounds is very important. In this paper, a high performance liquid chromatrography method for S-adenosylmethionine and S-adenosylhomocysteine measurement as fluorescent 1,N ⁶-ethanoderivatives from biological samples was validated in terms of selectivity, linearity range of the response (R?>?0.9993), detection limit (9?×?10^?9 and 4.4?×?10^?9 molL^?1), the limit of quantitation (9.7?×?10^?9 and 5.7?×?10^?9?mol?L^?1), precision, trueness and robustness. The method for quantification simultaneous of these compounds is rapid, sensitive and precise and appropriate for clinical analysis.     

The effect of LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript> on the complexation with potato starch-chitosan blend polymer electrolytes

This work examines the effect of lithium trifluoromethanesulfonate (LiCF₃SO₃) and glycerol on the conductivity and dielectric properties of potato starch-chitosan blend-based electrolytes. The electrolytes are prepared via solution cast technique. From X-ray diffraction (XRD) analysis, the blend of 50 wt.% starch and 50 wt.% chitosan is found to be the most amorphous blend. Fourier transform infrared (FTIR) spectroscopy studies show the interaction between the electrolyte materials. The room temperature conductivity of pure starch-chitosan film is found to be (2.85 ± 1.31) × 10^?10 S cm^?1. The incorporation of 45 wt.% LiCF₃SO₃ increases the conductivity to (7.65 ± 2.27) × 10^?5 S cm^?1. Further conductivity enhancement up to (1.32 ± 0.35) × 10^?3 S cm^?1 has been observed on addition of 30 wt.% glycerol. This trend in conductivity is verified by XRD and dielectric analysis. The temperature dependence of conductivity of all electrolytes are Arrhenian.     

A Validated Spectrofluorimetric Method for the Determination of Citalopram in Bulk and Pharmaceutical Preparations Based on the Measurement of the Silver Nanoparticles-Enhanced Fluorescence of Citalopram/Terbium Complexes

A simple, sensitive, and accurate spectrofluorimetric method was developed for the determination of citalopram in bulk and pharmaceutical preparations. The method is based on the enhancement of the weak fluorescence signal (FL) of the Tb (III)-citalopram system in the presence of silver nanoparticles. Fluorescence intensities were measured at 555 nm after excitation at 281 nm. Prepared silver nanoparticles (AgNPs) were characterized by UV-Visible spectra and transmission electron microscopy (TEM). Various factors affecting the formation of citalopram-Tb (III)-AgNPs complexes were studied and optimized. The fluorescence intensity versus concentration plot was linear over the range 0.02–14 μg?mL^?1, with an excellent correlation coefficient of 0.9978. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 7.15?×?10^?6?μg?mL^?1 and 2.38?×?10^?5?μg?mL^?1 respectively. The proposed method was found to have good reproducibility with a relative standard deviation of 3.66 % (n?=?6). The interference effects of common excipients found in pharmaceutical preparations were studied. The developed method was validated statistically by performing recoveries studies and successfully applied for the assay of citalopram in bulk powder and pharmaceutical preparations. Percent recoveries were found to range from 98.98 % to 100.97 % for bulk powder and from 96.57 % to 101.77 % for pharmaceutical preparations.     

Biopolymer electrolytes based on carboxymethyl ҡ-carrageenan and imidazolium ionic liquid

Novel biopolymer electrolytes based on carboxymethyl kappa-carrageenan (CM?-carrageenan) and ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) have been successfully developed. Strong coordination and hydrogen bonding interaction of [Bmim]Cl with the biopolymer were detected by Fourier transform infrared (FTIR) spectroscopy. The efficient function of [Bmim]Cl as the charge carrier in the system was reflected by electrochemical impedance spectroscopy (EIS) where the highest ionic conductivity (σ) of (5.76 ± 0.20) × 10^?3 S cm^?1 was achieved at ambient temperature (298 K) upon 30 wt.% of [Bmim]Cl inclusion. X-ray diffraction (XRD) analysis confirmed that the addition of ionic liquid did not alter the prominent amorphous phase of CM?-carrageenan. Analysis of scanning electron microscopy (SEM) proved the strong interaction of [Bmim]Cl with the biopolymer matrix. The highest conducting biopolymer electrolyte showed an electrochemical stability up to 3.0 V, whereas the transference number measurement revealed that ions are the major elements that contribute to the conductivity with 0.970 ion transference number.     

Ultrasonic preparation of tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotubes for trace Ni(II) sensing

Under an aid of ultrasonic, tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotubes were prepared for Ni(II) sensing in aqueous solution. The processes involved the fabrication of tetraoxalyl ethylenediamine melamine resin by one pot way, the coating of tetraoxalyl ethylenediamine melamine resin at multiwalled carbon nanotubes (MWCNTs), and the determination of Ni(II). The present materials were carefully examined by Fourier transform infrared spectroscopy, field emission scanning electron microscope, and electrochemistry techniques. A great deal of amorphous microsphere could be observed for tetraoxalyl ethylenediamine melamine resin with an average diameter of 1.2 μm, and MTE could evenly adhere at the surface of MWCNTs by the ultrasonic. Tetraoxalyl ethylenediamine melamine resin-coated multiwalled carbon nanotube-modified paraffin-impregnated graphite electrode was successfully used for the determination of Ni(II) by differential pulse adsorptive anodic stripping voltammetry. The current responses (?0.3 V) were linearly increased depending on the concentration from 1?×?10^?11 to 3?×?10^?10 M (i (μA)?=?11.1?+?7.9 c (1?×?10^?12 M); R?=?0.9901, 3σ?=?7?×?10^?12 M).     

Effect of ZnO filler concentration on the conductivity, structure and morphology of PVdF-HFP nanocomposite solid polymer electrolyte for lithium battery application

The polyvinylidene difluoride-co-hexafluoropropylene (PVdF-HFP) nanocomposite solid polymer electrolyte films were developed by solution-casting method. PVdF-HFP as a polymer host, lithium perchlorate (LiClO₄) as a salt for lithium ion, and ZnO nanoparticles as fillers were used to form the nanocomposite solid polymer electrolyte films. All the prepared samples were characterized by X-ray diffraction (XRD), differential scanning calorimetry, and scanning electron microscopy. The XRD patterns of the pure and nanocomposite solid polymer electrolyte samples indicate the formation of amorphous phase with 17.5 wt.% of lithium salt and ZnO fillers up to 3 wt.%. The total conductivity and lithium ion transference number were studied at room temperature by using impedance spectroscopy and Wagner’s polarization methods. The highest conductivity at room temperature for solid polymer electrolyte and nanocomposite solid polymer electrolyte are found to be 3.208?×?10^?4 and 1.043?×?10^?3 S/cm, respectively. Similarly, the lithium ion transference number is evaluated for the optimized solid polymer electrolyte and nanocomposite solid polymer electrolyte films with 3 wt.% of ZnO fillers. And it is found that ionic transference number could be enhanced from 92 to 95 % with the addition of nanosized ZnO fillers to the solid polymer electrolyte.     

Effect of Al doping on structural,optical and electrical properties of SnO2 thin films synthesized by pulsed laser deposition

Aluminium-doped (Al = 0–5?wt.%) SnO₂ thin films with low-electrical resistivity and high optical transparency have been successfully synthesized by pulsed laser deposition technique at 500 °C. Structural, optical and electrical properties of the as-deposited and post-annealed thin films were investigated. X-ray diffraction patterns suggest that the films transform from crystalline to amorphous state with increasing aluminium content. The root mean square (R_q) surface roughness parameter, determined by atomic force microscopy decreases upon annealing of the as-deposited film. While resistivity of the film is the lowest (9.49 × 10^?4 Ω-cm) at a critical doping level of 1?wt.% Al, optical transparency is the highest (nearly 90%) in the as-deposited condition. Temperature dependence of the electrical resistivity suggests that the Mott’s variable range hopping process is the dominant carrier transport mechanism in the lower temperature range (40–135 K) for all the films whereas, thermally activated band conduction mechanism seems to account for conduction in the higher temperature region (200–300 K).     

Representation of type I heterostructure junctionless tunnel field effect transistor for high-performance logic application

In this paper, a gate-all-around junctionless tunnel field effect transistor (JLTFET) based on heterostructure of compound and group III–V semiconductors is introduced and simulated. In order to blend the high tunneling efficiency of narrow band gap material JLTFETs and the high electron mobility of III–V JLTFETs, a type I heterostructure junctionless TFET adopting Ge–Al _x Ga_1?x As–Ge system has been optimized by numerical simulation in terms of aluminum (Al) composition. To improve device performance, we considered a nanowire structure, and it was illustrated that high-performance logic technology can be achieved by the proposed device. The optimal Al composition founded to be around 20 % (x = 0.2). The numerical simulation results demonstrate that the proposed device has low leakage current I _OFF of ~1.9 × 10^?17, I _ON of 4 µA/µm, I _ON/I _OFF current ratio of 1.7 × 10¹¹ and subthreshold swing SS of 12.6 mV/decade at the 40 nm gate length and temperature of 300 K.     

Benzoylferrocene-modified carbon nanotubes paste electrode as a voltammetric sensor for determination of hydrochlorothiazide in pharmaceutical and biological samples

The electrooxidation of hydrochlorothiazide (HCT) at the surface of a benzoylferrocene modified multi-walled carbon nanotube paste electrode was studied using electrochemical approaches. Under the optimized conditions (pH 7.0), the square wave voltammetric peak current of HCT increased linearly with HCT concentration in the ranges of 6.0?×?10^?7 to 3.0?×?10^?4 M. The detection limit was 9.0?×?10^?8 M HCT. The diffusion coefficient (D?=?1.75?×?10^?5 cm²/s) and electron transfer coefficient (α?=?0.45) for HCT oxidation were also determined. The proposed sensor was successfully applied for the determination of HCT in human urine and tablet samples.     

Ionic conductivity and dielectric properties of potato starch-magnesium acetate biopolymer electrolytes: the effect of glycerol and 1-butyl-3-methylimidazolium chloride

In the present work, the effect of glycerol and 1-butyl-3-methylimidazolium chloride (BmImCl) on the conductivity and dielectric properties of potato starch doped with magnesium acetate, Mg(C₂H₃O₂)₂-based electrolytes is studied. The electrolytes are prepared via solution cast technique. The interaction between the materials is proven by Fourier transform infrared (FTIR) analysis. Electrolyte with 20 wt.% Mg(C₂H₃O₂)₂ exhibits a room temperature conductivity of (2.44 ± 0.37) × 10^?8 S cm^?1. The addition of 30 wt.% glycerol to the best polymer-salt composition has further enhanced the conductivity to (2.60 ± 0.42) × 10^?6 S cm^?1. A conductivity of (1.12 ± 0.08) × 10^?5 S cm^?1 has been achieved when 18 wt.% BmImCl is added to the best polymer-salt-plasticizer composition. From the loss tangent (tan δ) plot, the relaxation time (t _r) for selected electrolytes is determined. From transference number measurements, ions are found to be the dominant charge carriers.     

Enhancement in electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes by 100 MeV Si9+ swift heavy ion irradiation

Swift heavy ion (SHI) irradiation has been used as a tool to enhance the electrochemical properties of ionic liquid-based nanocomposite polymer electrolytes dispersed with dedoped polyaniline (PAni) nanorods; 100 MeV Si⁹⁺ ions with four different fluences of 5?×?10¹⁰, 1?×?10¹¹, 5?×?10¹¹, and 1?×?10¹² ions cm^?2 have been used as SHI. XRD results depict that with increasing ion fluence, crystallinity decreases due to chain scission up to fluence of 5?×?10¹¹ ions cm^?2, and at higher fluence, crystallinity increases due to cross-linking of polymer chains. Ionic conductivity, electrochemical stability, and dielectric properties are enhanced with increasing ion fluence attaining maximum value at the fluence of 5?×?10¹¹ ions cm^?2 and subsequently decrease. Optimum ionic conductivity of 1.5?×?10^?2 S cm^?1 and electrochemical stability up to 6.3 V have been obtained at the fluence of 5?×?10¹¹ ions cm^?2. Ac conductivity studies show that ion conduction takes place through hopping of ions from one coordination site to the other. On SHI irradiation, amorphicity of the polymer matrix increases resulting in increased segmental motion which facilitates ion hopping leading to an increase in ionic conductivity. Thermogravimetric analysis (TGA) measurements show that SHI-irradiated nanocomposite polymer electrolytes are thermally stable up to 240–260 °C.     

Li+ transportation kinetics of FeF3 · 0.33H2O/C nanocomposite synthesized by one-step solid state method

A new cathode material for lithium ion battery FeF₃?·?0.33H₂O/C was synthesized successfully by a simple one-step chemico-mechanical method. It showed a noticeable initial discharge capacity of 233.9 mAh g^?1 and corresponding charge capacity of 186.4 mAh g^?1. A reversible capacity of ca.157.4 mAh g^?1 at 20 mA g^?1 can be obtained after 50 charge/discharge cycles. To elucidate the lithium ion transportation in the cathode material, the methods of electrochemical impedance spectroscopy (EIS) and galvanostatic intermittent titration technique (GITT) were applied to obtain the lithium diffusion coefficients of the material. Within the voltage level of 2.05–3.18 V, the method of EIS showed that \( {D}_{{\mathrm{Li}}^{+}} \) varied in the range of 1.2?×?10^?13?~?3.6?×?10^?14 cm² s^?1 with a maximum of 1.2?×?10^?13 cm² s^?1 at 2.5 V. The method of GITT gave a result of 8.1?×?10^?14?~?1.2?×?10^?15 cm² s^?1. The way and the range of the variation for lithium ion diffusion coefficients measured by the GITT method show close similarity with those obtained by the EIS method. Besides, they both reached their maximum at a voltage level of 2.5 V.     

Study on the Cofluorescence Effect of Europium (III)–Yttrium (III)–Balofloxacin–Sodium Dodecyl Sulfate System and Its Analytical Application

A new fluorescence enhancement phenomenon in the europium(III)–balofloxacin–sodium dodecyl sulfate system was observed when yttrium(III) was added. Based on this, a sensitive cofluorescence assay for the estimation of balofloxacin was established. Under the optimized conditions, the enhanced fluorescence signal was linear over the concentration of balofloxacin ranging from 3.0 × 10^?9 to 7.0 × 10^?6 mol L^?1 with a correlation coefficient of 0.9993. The detection limit (3 σ) was determined as 8.3 × 10^?10 mol L^?1. The presented method was successfully applied to determination of balofloxacin in pharmaceutical preparations, human serum, and urine. The possible fluorescence enhancement mechanism was also discussed.     

Low-temperature fatigue behaviour and development of dislocation structure in aluminium single crystals with single-slip orientation

Al single crystals oriented for single slip were cyclically deformed under constant plastic strain amplitudes between 1?×?10^?3 and 5?×?10^?2 at 77?K. Al single crystals showed hardening to saturation at all applied shear stress amplitudes. The resultant cyclic stress–strain curve (CSSC) showed a stress plateau in a range of plastic strain amplitude from 2?×?10^?3 to 2?×?10^?2. Surface observation revealed that multiple slip systems were active even at the strain amplitude in the plateau region. At plastic strain amplitudes corresponding to the plateau of the CSSC, persistent slip bands (PSBs) were formed parallel to the primary slip plane. In the PSBs, well-developed dislocation walls parallel to the {100} planes were observed. The microstructure in the PSBs was explained by the fact of multiple activation of the primary and critical slip systems. The above results indicate that the high stacking fault energy of Al is an important factor affecting the fatigue behaviour even at 77?K.     

Selective Fluorescence Sensing of Deoxycytidine 5��-Monophosphate (dCMP) Employing a Bis(diphenylphosphate)diimine Ligand

A new bis(diphenylphosphate)diimine ligand (BP1) was prepared and evaluated for its ability for selective detection of deoxycytidine 5??-monophosphate (dCMP). BP1 exhibited off-type fluorescence in the presence of dCMP. The fluorescence of BP1 was significantly quenched upon the addition of 2.5?×?10^?4 M dCMP and the detection limit was 1.25?×?10^?5 M in MeCN-H₂O (1:1, v/v). The binding ratio between BP1 and dCMP was determined to be 1:1 with the binding constant of 3.98?±?0.60?×?10^?3 M^?1.