Effect of plasma treatment on cellulose fiber

Cotton cellulose fibers were modified in inert plasma. Surface morphology of the modified fibers was studied by SEM and changes in the surface composition by XPS and FTIR. Standard goniometry was used for determination of contact angle as a function of modified fiber aging. Absorptivity of modified fibers was determined by gravimetry and fiber width in physiological solution, simulating body liquids, by confocal microscopy. Antibacterial effect of pristine and plasma treated samples was examined by following growth of Escherichia coli. Plasma treatment led to surface ablation, changes in surface morphology and fiber width. Surface of the plasma modified fibers was oxidized and their water absorptivity was reduced. The plasma modification did not affect E. coli growth substantially.     

The effect of plasma treatment on structure and properties of poly(1-butene) surface

This paper is focused on the chemical and morphology changes in the surface of poly(1-butene) (PB-1) generated by plasma treatment. The radio frequency capacitively coupled plasma (air, argon, argon then allylamine, argon containing ammonia and argon with octafluorocyclobutane) was used. Modified surface of PB-1 was characterized by contact angle measurements, X-ray photoelectron spectroscopy, and atomic force microscopy. The surface hydrophilization by air and argon with ammonia plasmas was evaluated as most sufficient. Oppositely, a high level of hydrophobicity of PB-1 surface was reached by combination of argon with octafluorocyclobutane plasma. Upon plasma modification, hydrophilicity/hydrophobicity of treated surfaces remained stable within three days under air atmosphere and then values of contact angle slowly recovered to those of unmodified PB-1. However, morphology and surface chemical composition of plasma-modified samples remained generally unchanged during observed time. Changes in surface hydrophilicity/hydrophobicity of plasma-treated PB-1 were attributed to variance of conformation of the surface molecules.     

Comparison of the effect of excimer laser irradiation and RF plasma treatment on polystyrene surface

Polystyrene (PS) samples were treated with excimer laser, argon and oxygen plasmas. The surface of PS was irradiated using ArF excimer pulsed laser (λ=193 nm). Radio frequency glow discharge (RF) was used to generate the argon and oxygen plasmas. The samples were processed at different number of pulses and treatment times. The changes were characterized by atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared (ATR-FTIR), scanning electron microscopy (SEM) and contact angle measurements. The data from ATR-FTIR spectra showed the induction process of oxygen-based functional group in both PS samples treated with RF plasma and laser. AFM and SEM observations demonstrated that a specific nanostructure was created on the laser-treated PS surface. Contact angle measurement indicated higher wettability of the treated PS with both argon and oxygen plasmas and lesser wettability of laser-treated samples. The data from in vitro assays showed the significant cell attachment and growth onto plasma-treated surfaces in comparison with laser treated samples.     

Water disinfection activity of cellulose filters treated with polycarboxylic acid and aromatic amine

A cellulose filter for water disinfection was developed using a polycarboxylic acid and an aromatic amine via a simple process with water as a solvent. 1,2,3,4-Butanetetracarboxylic acid/m-phenylenediamine solution was applied to cellulose filters using a pad–dry–curing process. The surfaces of treated cellulose filters were examined by Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy. The liquid permeabilities of treated cellulose filters were determined by capillary flow porometry, and their water disinfection efficacies were measured by non-pressure-driven filtration. Chlorinated cellulose filters disinfected Escherichia coli- and Staphylococcus aureus-containing solutions to a much higher degree than observed for nonchlorinated cellulose filters.     

ESCA study of polymer surfaces treated by plasma

Surfaces of polymers [polyethylene, polystyrene, poly(ethylene terephthalate), poly(oxymethylene), cellulose acetate, polyacrylonitrile, nylon 6, and polytetrafluoroethylene] treated with argon (inert) and nitrogen (reactive) plasma were examined by ESCA (electron spectroscopy for chemical analysis). Argon plasma treatment generally introduces oxygen functionalities into the polymer surface. Nitrogen treatment generally incorporates nitrogen and oxygen functionalities into the treated surface. The extent of oxygen incorporation is typically less than that produced by argon plasma. When nitrogen and oxygen functional groups are already in a polymer structure, the extent of additional incorporation of these two elements as a result of plasma treatment is very much less than with other polymers. Polymers which contain only one of the elements tend to incorporate the other element to much the same degree as polymers without either element initially present.     

The determination of traces of ammonium-nitrogen in aqueous solution by optical emission spectrometry with a high-frequency inductively coupled argon plasma source

A method for the determination of low levels of ammonium ion in solution by optical emission spectrometry with an inductively coupled argon plasma source operated at 27 MHz is presented. The ammonium ion is oxidized with sodium hypobromite in alkaline medium, the evolved nitrogen is passed into the argon plasma, and the NH emission intensity produced in the plasma at 336.0 nm is monitored. A practical detection limit of 0.1 μg N ml^-1 for 5-ml aqueous sample solutions has been obtained. The method has been applied to the determination of the exchangeable ammonium content of soil samples.     

Investigation of plasma-functionalized multiwalled carbon nanotube film and its application of DNA sensor for Legionella pneumophila detection

A novel multiwall carbon nanotube (MWCNT) electrode functionalized with oxygen plasma treatment was prepared and characterized, and its DNA sensing ability for Legionella pneumophila (L. pneumophila) detection was examined using electrochemical measurement. A well-patterned MWCNT working electrode (WE) on a Pt track was fabricated using photolithography, transfer methods and an etching technique. The MWCNT WE was functionalized by oxygen plasma treatment prior to applying for DNA sensor. The surface morphology of the plasma-functionalized MWCNT (pf-MWCNT) WEs were observed by scanning electron microscope (SEM) and the change of chemical composition was characterized by X-ray photoelectron spectroscopy (XPS), and electrochemical measurements were performed using CV with ferricyanide/ferrocyanide redox couple. Effective areas of working electrodes were calculated to be 0.00453 cm² for pristine MWCNT electrode and 0.00747-0.00874 cm² for pf-MWCNT electrodes with different plasma treatment times. Differential pulse voltammetry (DPV) was carried out in methylene blue solution for DNA sensing. The pf-MWCNT based DNA sensor was successfully operated in a target concentration range of 10 pM to 100 nM and had a lower detection limit than a pristine MWCNT based DNA sensor.     

Surface modification of polyester by oxygen‐ and nitrogen‐plasma treatment

In this paper, we present a study on the surface modification of polyethyleneterephthalate (PET) polymer by plasma treatment. The samples were treated by nitrogen and oxygen plasma for different time periods between 3 and 90 s. The plasma was created by a radio frequency (RF) generator. The gas pressure was fixed at 75 Pa and the discharge power was set to 200 W. The samples were treated in the glow region, where the electrons temperature was about 4 eV, the positive ions density was about 2 × 10¹⁵ m^?3, and the neutral atom density was about 4 × 10²¹ m^?3 for oxygen and 1 × 10²¹ m^?3 for nitrogen. The changes in surface morphology were observed by using atomic force microscopy (AFM). Surface wettability was determined by water contact angle measurements while the chemical composition of the surface was analyzed using XPS. The stability of functional groups on the polymer surface treated with plasma was monitored by XPS and wettability measurements in different time intervals. The oxygen‐plasma‐treated samples showed much more pronounced changes in the surface topography compared to those treated by nitrogen plasma. The contact angle of a water drop decreased from 75° for the untreated sample to 20° for oxygen and 25° for nitrogen‐plasma‐treated samples for 3 s. It kept decreasing with treatment time for both plasmas and reached about 10° for nitrogen plasma after 1 min of plasma treatment. For oxygen plasma, however, the contact angle kept decreasing even after a minute of plasma treatment and eventually fell below a few degrees. We found that the water contact angle increased linearly with the O/C ratio or N/C ratio in the case of oxygen or nitrogen plasma, respectively. Ageing effects of the plasma‐treated surface were more pronounced in the first 3 days; however, the surface hydrophilicity was rather stable later. Copyright © 2008 John Wiley & Sons, Ltd.     

Au nanolayers deposited on polyethyleneterephtalate and polytetrafluorethylene degraded by plasma discharge

Polyethyleneterephtalate (PET) and polytetrafluorethylene (PTFE) foils were modified by plasma discharge. The effect of plasma modification on polymer surface wettability and on properties of gold coatings were studied as a function of time from plasma exposure (aging time) and polymer substrate temperature. Thickness, sheet resistance, and surface topology of gold layers were studied. Aging of the plasma‐exposed samples is accompanied by increase in contact angle, which is explained by rearrangement of the polymer segments in the polymer surface monolayer, and a decrease in the concentration of polar groups. The aging also leads to a decline in surface roughness R_a measured by atomic force microscopy (AFM). Under deposition conditions, comparable thicknesses of deposited Au layers were prepared on pristine PET and plasma‐treated PET and PTFE samples. The thinnest Au layers were evaporated onto pristine PTFE. The sheet resistance decreases with increasing thickness of Au layer. Plasma treatment leads to an increase of PTFE surface roughness, which becomes even more pronounced after Au deposition. A higher roughness shows that the PET samples are deposited with the Au layer at temperatures above the glassy transition temperature T_g. Copyright © 2006 John Wiley & Sons, Ltd.     

Surface modification of acrylate intraocular lenses with dielectric barrier discharge plasma at atmospheric pressure

Surface modification with dielectric barrier discharge (DBD) plasma was carried out at atmospheric pressure (argon as the discharge gas) to improve the biocompatibility of hydrophobic acrylate intraocular lens (IOL). Changes of the plasma-treated IOL surface in chemical composition, morphology and hydrophilicity were comprehensively evaluated by X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM) and water contact angle (WCA) measurements. The surface biocompatibility of the untreated and plasma-treated IOLs was compared with the adhesion behavior of platelets, macrophages and lens epithelial cells (LECs) in vitro. After DBD plasma treatment, the hydrophilicity of the IOL surface was obviously improved. The changes in WCA with treatment extension may be attributed to both the introduction of oxygen or/and nitrogen-containing polar groups and the increase of surface roughness induced by plasma etching effect. The existence of low molecular weight oxidized material (LMWOM) was proved on the plasmatreated IOL which was caused by the chain scission effect of the plasma treatment. The plasma-treated IOLs resisted the adhesion of platelets and macrophages significantly. The LECs spreading and proliferation were postponed on the IOLs plasma-treated for more than 180 s, with a well maintained epithelial phenotype of LECs. The IOL biocompatibility was improved after the DBD plasma treatment. We speculate that slighter foreign-body reaction and later incidence of anterior capsule opacification (ACO) may be expected after implantation of the argon DBD plasma-treated IOL. Supported by the Zhejiang Natural Science Foundation of China (Grant No. 2004C23003)     

Novel aspects of nanocellulose

Novel nanoscaled cellulose particles were prepared using high-pressure homogenization of aqueous media contenting treated cellulose samples in a Microfluidizer^® processor (MF). Here, we present the generation of spherical cellulose nanoparticles as an extension of previously published reports of nano fibrillated cellulose. Although MF treatment of unmodified cellulose yields nanofibrils which are reported in several publications, in the current work different kinds of pretreatments were proven to be necessary to obtain spherical structured cellulose nanoparticles. One such treatment may be the decrystallization of cellulose regenerating it from N-methylmorpholine-N-oxid-monohydrate (NMMNO*H₂O). Nanocellulose was then obtained by a subsequent high-pressure mechanical treatment of the precipitate in aqueous dispersion. Decrystallization was also realized by grinding cellulose in a planetary ball mill. The resulting amorphous intermediates were characterized by Raman spectroscopy. Another approach tested was hydrolysis and subsequent mechanical treatment using an Ultra-Turrax^® and MF. Another alternative was given by the mechanical treatment of aqueous dispersions of low substituted cellulose derivatives such as carboxymethyl cellulose and oxidized cellulose without any further hydrolysis.     

Isolation and characterization of fluorescent nanoparticles from pristine and oxidized electric arc-produced single-walled carbon nanotubes

Fluorescent nanoparticles were isolated from both pristine and nitric acid-oxidized commercially available carbon nanotubes that had been produced by an electric arc method. The pristine and oxidized carbon nanotube-derived fluorescent nanoparticles exhibited a molecular-weight-dependent photoluminescence in the violet-blue and blue to yellowish-green ranges, respectively. The molecular weight dependency of the photoluminescence was strongly related to the specific supplier. We analyzed the composition and morphology of the fluorescent nanoparticles derived from pristine and oxidized nanotubes from one supplier. We found that the isolated fluorescent materials were mainly composed of calcium and zinc. Moreover, the pristine carbon nanotube-derived fluorescent nanoparticles were hydrophobic and had a narrow distribution of maximal lateral dimension. In contrast, the oxidized carbon nanotube-derived fluorescent nanoparticles were superficially oxidized and/or coated by a thin carbon layer, had the ability to aggregate when dispersed in water, and exhibited a broader distribution of maximal lateral dimension.     

NMR spectroscopic studies on dissolution of softwood pulp with enhanced reactivity

N-methylmorpholine N-oxide (NMMO) is a known cellulose solvent used in industrial scale (LyoCel process). We have studied interactions between pretreated softwood pulp fibers and aqueous NMMO using nuclear magnetic resonance (NMR) spectroscopic methods, including solid state cross polarisation magic angle spinning (CP-MAS) ¹³C and ¹⁵N spectroscopies, and ¹H high resolution MAS NMR spectroscopy. Changes in both cellulose morphology and in accessibility of solvents were observed after the pulp samples that were exposed to solvent species were treated at elevated temperature. Evidence about interactions between cellulose and solvent components was observed already after a heat treatment of 15 min. The crystalline structure of cellulose was seen to remain intact for the first 30 min of heat treatment, at the same time there was a re-distribution of solvent species taking place. After a 90 min heat treatment the crystalline structure of cellulose had experienced major changes, and potential signs of regeneration into cellulose II were observed.     

Annealing of silver nanolayers sputtered on polytetrafluoroethylene

Silver nanolayers sputtered on polytetrafluoroethylene and their changes induced by post‐deposition annealing at 100–300 °C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy and by measurement of electrical sheet resistance by two‐point technique. Chemical composition was determined by X‐ray photoelectron spectroscopy (XPS) and electrokinetic analysis in dependence on the gold layer thickness. The annealing at 300 °C leads to significant rearrangement of the silver layer, and the transition threshold increases to 35 nm. The presence of oxidized structures on silver‐coated samples is observed in XPS spectra and by electrokinetic analysis, too. Annealing of pristine and silver‐coated poly(tetrafluoroethylene) at 300 °C results in significant change of the sample surface morphology and chemistry. There is observed formation of isolated silver islands on the surface, which could be connected with silver melting. Later, the silver agglomeration takes place. Copyright © 2013 John Wiley & Sons, Ltd.     

Effect of cold atmospheric plasma treatment on hydrophilic properties of fluorosilicone rubber

Vulcanized fluorosilicone rubber for aviation was treated by argon and oxygen cold atmospheric plasma (CAP) in order to modify its hydrophilic properties. The sample's chemical composition was analyzed by X‐ray photoelectron spectroscopy (XPS). The static contact angle, surface free energy, and adhesion strength were used to indicate the hydrophilic properties. Additionally, the surface morphologies of the specimens were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results showed that the contact angle declined from 101.5° to 22°, and the surface energy rose from 21.3 to 71.2 mJ/m² after they were treated by argon plasma. Alternatively, the water contact angle decreased to 25.5°, and the surface energy increased to 70.6 mJ/m² after they were treated by oxygen plasma. In addition, the SEM and AFM images of the samples illustrate that the treated surface of fluorosilicone rubber becomes rougher than the non‐treated surface. The concentrations of carbon (C) and fluorine (F) elements of the material' surface decreased and the contents of O element greatly enriched after plasma treatment. Additionally, chemical group C―O and C―OH appeared after the treatment. However, the hydrophilic effect of the plasma treatment is aged after the specimens were stored for 8–12 h. Copyright © 2016 John Wiley & Sons, Ltd.     

Development of highly ionic conductive cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co-methyl methacrylate) graft copolymer membranes

A novel cellulose acetate-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer was prepared via free radical polymerization for the first time. The chemical structure of the graft copolymer was confirmed using FT-IR, ¹H NMR and EDX. The TGA and DSC investigated the thermal changes. Factors affecting the grafting process were studied and various grafting characteristic parameters such as grafting efficiency (%), grafting yield (%) and add-on value (%) were determined. Flexible membranes based on different graft copolymer compositions were fabricated by simple solution casting. Physicochemical properties including ion exchange capability (IEC), water uptake (WU) and proton conductivity (σ) were evaluated. These membranes demonstrated higher IEC, WU and conductivity than the pristine CA. The maximum proton conductivity of the CA-g-poly (2-acrylamido-2-methylpropane sulfonic acid-co- methyl methacrylate) copolymer membrane (68%; Add-on %) was found to be 6.44 × 10⁻³ S/cm compared with 0.035 × 10⁻³ S/cm of the pristine CA. Thus, the appropriate graft copolymer composition will allow fine-tuning of the physical characteristics and led to several potential applications, such as polyelectrolyte fuel cells membranes or biodiesel production.     

Improvement of bonding between cellulose and polypropylene by plasma treatment

Plasma treatments can be utilized to upgrade the value of lignocellulosic materials for applications such as biobased composites. Poor adhesion in biobased composites is caused by incompatibility between polar cellulosics and non-polar thermoplastics. Plasma modification of both cellulose and polypropylene was evaluated by a T-peel test for improved compatibility and adhesion between these materials. Oxygen and argon plasmas were used to modify the surface of polypropylene films, while a cyclohexane plasma was used to modify the cellulose surface through deposition of a hydrophobic polymer layer. For plasma treatment of polypropylene, changes in power input had a greater effect on adhesion than changes in pressure. Surface oxidation and increased acid/base characteristics were found on both argon- and oxygen-plasma-treated polypropylene based on ESCA and wetting measurements. With the non-reactive argon plasma the persistence of reactive species, such as free radicals, was very important for enhanced adhesion. The amount of polar carbonyl groups introduced onto the surface was also an important factor for adhesion improvement. Modification of the cellulose (filter paper) surface to a hydrophobic character with a cyclohexane plasma did not improve adhesion to polypropylene.     

Green chemicals and process to graft cellulose fibers

The treatment of additive-free hand sheet paper samples with cold plasma was carried out and showed that cellulose can be chemically linked with reactive natural products, namely myrcene (My) and limonene (LM). Contact-angle measurement and X-ray photoelectron spectroscopy (XPS) were used to ascertain the occurrence of the grafting. Indeed, the contact-angle value of a drop of water deposited at the surface of paper increased from 30° for unmodified substrate to about 105 and 107°, for LM- and My-treated samples, respectively. In fact, LM- and My-treated surfaces were rendered totally apolar. Indeed, the polar contribution to the surface energy decreased from about 23 mJ/m² for pristine samples to practically zero for treated ones. The treated surfaces displayed water-barrier properties; the penetration of the liquid was reduced significantly after LM and My treatments. The XPS spectra showed that the modification with LM and My gave rise to very significant change in the O/C ratio, as well as in the intensity of the C1 peak assigned to aliphatic carbon sequences.     

Plasma modified polymers as a support for enzyme immobilization II. Amines plasma

Polysulfone films were modified by ammonia, n-butylamine and allylamine remote plasma using various sample-to-plasma distances. Contact angle measurements, FTIR-ATR and XPS spectroscopy proved the presence of polar, including amine, groups on the modified surface. Presence of argon in the plasma environment made the plasma more stable and in most cases left the surface more hydrophilic but with a lower amount of nitrogen moieties on it. Glucose isomerase was successfully immobilized on the plasma-treated samples. Its activity correlates well with the concentration of C-N bonds on the surface. The highest enzyme activity was achieved for samples treated with allylamine/Ar plasma close to the plasma edge.     

Improving the mechanical properties of CNF films by NMMO partial dissolution with hot calender activation

Reinforcing of cellulose nanofibril (CNF) films by partial dissolution with N-methylmorpholine-N-oxide (NMMO) was investigated. The method investigated is composed of impregnation of CNF film with liquid solution of NMMO followed by dry heat activation. The heat activation of the impregnated film was carried out using a heated calendering nip, which enabled simultaneous heating and compression. The partial dissolution of cellulose by NMMO caused a significant increase in the transparency of CNF film due to the decrease of film porosity and increased surface smoothness. The dry strength of the reinforced film was increased from 122 up to 195 MPa. Furthermore, the wet strength of the reinforced film was up to 70% greater than the dry strength of pure CNF film. The changes in the fibrillar structure were investigated with topographical imaging (SEM and AFM) and spectroscopically using NMR and FTIR. No significant changes in the fibril structure or cellulose morphology were observed. Moreover, the treated film resisted significant water pressure, highlighting CNF film’s permanent water resistance. The partial dissolution process with NMMO was also capable of reinforcing a CNF composite film with macro scale structural elements (lyocell short-cut fibres). The strategy investigated is a robust and fast method to improve the mechanical properties of fibrillary cellulose films, allowing them utilization in applications where improved water resistance and fully cellulosic character are required properties.