A new route to 2,2′,3,3′-tetrasubstituted binaphthyls

Based on an ortho-lithiation protocol of 2,2′-dibromo-1,1′-binaphthyl four tetrasubstituted binaphthyls, 2,2′-dibromo-3,3′-diiodo-, 3,3′-dibromo-2,2′-diiodo-, 2,2′,3,3′-tetrabromo-, and 2,2′,3,3′-tetraiodo-1,1′-binaphthyls have been prepared in excellent yield which in turn proved to be versatile key intermediates in the synthesis of various 2,2′,3,3′-tetrasubstituted 1,1′-binaphthyl derivatives.     

Synthesis and characterizations of 3,3′-bis(diphenylphosphinoamine)-2,2′-bipyridine and 3,3′-bis(diphenylphosphinite)-2,2′-bipyridine and their chalcogenides

New bis(phosphinoamine) and bis(phosphinite) derivatives of 2,2′-bipyridine were prepared through a single step reaction of 3,3′-diamino-2,2′-bipyridine or 3,3′-dihydroxy-2,2′-bipyridine with diphenylchlorophosphine, respectively. Their P = E chalcogenides (E = O, S, Se) were also prepared. All the new compounds were characterized by elemental analysis, IR and NMR spectroscopies. The molecular structure of 3,3′-bis(diphenylthiophosphinite)-2,2′-bipyridine was elucidated by single-crystal X-ray crystallography.     

5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮的合成及结构表征

本文以4-甲基邻苯二甲酸酐为原料, 成功地合成了5,5′-二甲基-2,2′-二茚满-1,1′,3,3′-四酮(2). 通过元素分析、核磁共振、红外光谱及质谱等测试手段, 确定了化合物2的结构与存在形式, 通过ESR测试发现化合物2具有顺磁性.     

An efficient synthesis of 3,3′-dipyridyl BINOL ligands

Microwave-assisted Suzuki cross-coupling between 2,2′-bis(methoxymethyl)-3,3′-bis(potassium trifluoroboronato)BINOL and a series of 2-bromo- or 2-chloropyridines provides efficient access to 3,3′-dipyridyl BINOL ligands.     

Facile acid-catalyzed condensation of 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone with phenols, methoxyaromatic systems and enols

Various phenols, methoxy aromatic compounds, 3- and 4-hydroxycoumarins and enols smoothly condense with 2-hydroxy-2,2′-biindan-1,1′,3,3′-tetrone 1 in an acid medium producing 2-aryl/alkyl-2,2′-biindan-1,1′,3,3′-tetrones in high yields. The adducts of resorcinol, 1,3,5-trihydroxybenzene and α- and β-naphthols of 1 preferably remain in the intramolecular hemi-ketal form, confirmed by X-ray diffraction studies. On the other hand para and meta substituted phenols condense with 1 in an acid medium to produce 6 or 7 substituted 2′,4-spiro(1′,3′-indanedion)-indeno[3,2-b]chromenes in good yields.     

Synthesis of 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles] as a new class of ultrafast light-driven molecular switch

A new class of ultrafast light-driven molecular switch has been designed and synthesized. The reaction of 1-substituted 2-methylidene-3,3-dimethyl-2,3-dihydro-1H-indoles with 2-chloromethyl-4-nitrophenol afforded 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indoles], following a basic workup. The spectroscopic properties and nanosecond-resolved photoinduced dynamics of five compounds in the 1′,3,3′,4-tetrahydrospiro[chromene-2,2′-indole] family were investigated.     

Improved synthesis of 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-diacetic acid derivatives

During the past decade, the chemistry of BINAP, BINAM, and BINOL derivatives experienced an important development due to multiple applications in catalysis, metallo-supramolecular chemistry and material science. Consequently, the need to develop functionalized binaphthyl derivatives became crucial. In this context, we were interested in preparing 2,2′-dimethoxy-1,1′-binaphthyl-3,3′-diacetic acid species. The latter were efficiently prepared using a modified Arndt-Eistert reaction that afforded the expected chiral diacid in good yield. Compared to the method we described earlier, this new strategy allows the preparation of the target homologated diacid chloride in a very efficient manner, limiting wastes and tedious column chromatographies.     

Convenient synthesis of 1,1′-H-spiro[indoline-3,3′-piperidine]

The spirocyclic indoline ring system represents an important scaffold for the discovery of novel therapeutics. Herein, we describe the synthesis of 1,1′-H-spiro[indoline-3,3′-piperidine] using an intramolecular palladium-catalyzed α-arylation reaction.     

1,1′-Methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline): synthesis, reaction, resolution, and application in catalytic enantioselective transformations

The preparation of new chiral 1,3-diamine ligand systems based on the 1,1′-methylene-bis(1,1′,2,2′,3,3′,4,4′-octahydroisoquinoline) framework is described. Synthesis of various mono-, di-, and bridged N-alkyl derivatives are presented. Resolution of one compound, its Cu(I)Br X-ray crystallographic structure and the preliminary results on its application in the enantioselective Henry and Aldol reactions are disclosed.     

A 3,3′-dichlorobenzidine-imprinted polymer gel surface plasmon resonance sensor based on template-responsive shrinkage

Molecularly imprinted polymer gel film on the gold substrate of a chip was prepared with minute amount of cross-linker for the fabrication of a surface plasmon resonance (SPR) sensor sensitive to 3,3′-dichlorobenzidine. The molecularly imprinted gel film was anchored on a gold chip by a surface-bound photo-radical initiator. The sensing of 3,3′-dichlorobenzidine is based on responsive shrinkage of the imprinted polymer gel film that is triggered by target binding. This change can improve the responsiveness of the imprinted SPR sensor to 3,3′-dichlorobenzidine. The molecularly imprinted polymer gel film was characterized with contact angle measurements, electrochemical impedance spectroscopy, cyclic voltammogram, swelling measurements and atomic force microscopy. The changes of SPR spectroscopy wavenumber shifts revealed that the imprinted gel sensing film can ‘memorize’ the binding of 3,3′-dichlorobenzidine compared to non-imprinted one. The imprinted gel-SPR sensor showed a linear response in the range of 9.0 × 10⁻¹² to 5.0 × 10⁻¹⁰ mol L⁻¹ (R² = 0.9998) for the detection of 3,3′-dichlorobenzidine, and it also exhibited high selectivity to 3,3′-dichlorobenzidine compared to its structurally related analogues. We calculated the detection limits to be 0.471 ng L⁻¹ for tap water and 0.772 ng kg⁻¹ for soil based on a signal to noise ratio of 3. The method showed good recoveries and precision for the samples spiked with 3,3′-dichlorobenzidine. This suggest that the imprinted gel-SPR sensing method can be used as a promising alternative for the detection of 3,3′-dichlorobenzidine.     

Diastereoselective addition of dimethyl phosphite to 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene-2-carboxaldehyde

Addition of dimethyl phosphite to racemic 3,3′,4,4′-tetramethyl-1,1′-diphosphaferrocene-2-carboxaldehyde gives almost exclusively one diastereomer of the corresponding α-hydroxyphosphonate (d.r. ?96:4). Its absolute configuration (S, R_p)-(R, S_p) was established by X-ray diffraction.     

Application of 3,3′-disubstituted xylBINAP derivatives in inter- and intramolecular asymmetric Heck/Mizoroki reactions

3,3′-Disubstituted xylBINAP derivatives were applied to inter- and intramolecular asymmetric Heck/Mizoroki reactions. The results from these reactions were compared to those obtained with (R)-xylBINAP, (S)-BINAP and 3,3′-disubstituted BINAP derivatives. Catalysts derived from 3,3′-disubstituted xylBINAP ligands were found to be most effective in the arylation of 2,3-dihydrofuran in terms of reaction times, conversions, and product enantioselectivity.     

An isoselective and visual inclusion host system using charge-transfer complexes of 3,3′-disubstituted-1,1′-bi-2-naphthol and methylviologen

A charge-transfer (CT) complex, composed of rac-3,3′-dibromo-1,1′-bi-2-naphthol as the electron donor and 1,1′-dimethyl-4,4′-bipyridinium dichloride as the electron acceptor, is formed only by the inclusion of specific guest molecules. The color of this inclusion CT complex is sensitive to the component guest molecules.     

New N-acyl, N-alkyl, and N-bridged derivatives of rac-6,6′,7,7′-tetramethoxy-1,1′,2,2′,3,3′,4,4′-octahydro-1,1′-bisisoquinoline

The preparation of potential new ligand systems based on the rac-1,1′,2,2′,3,3′,4,4′-octahydro-6,6′,7,7′-tetramethoxy-1,1′-bisisoquinoline skeleton has been investigated. Syntheses of N-(2-bromobenzyl), N-(3-acetoxybenzyl), N-acetyl, N-chloroacetyl, N-chlorocarbonyl, N-ethoxycarbonyl and N-tert-butyloxycarbonyl derivatives and five macrocyclic, polyether containing derivatives are described.     

Oxidative coupling of 2-substituted 1,2-dihydro-1-naphthols using Jones reagent: a simple entry into 3,3′-disubstituted 1,1′-binaphthyl-4,4′-diols

2-Substituted 1,2-dihydro-1-naphthols underwent regioselective oxidative dimerization, when treated with Jones reagent, to furnish 3,3′-disubstituted 1,1′-binaphthyl-4,4′-diols. A series of symmetrical binaphthols were prepared and it was shown that the coupling reaction proceeds via the sequential oxidation of 2-substituted 1,2-dihydro-1-naphthols to 2-substituted 1-naphthols, which oxidatively dehydrodimerized.     

Enantioselective phenyl transfer to aldehydes using 1,1′-bi-2-naphthol-3,3′-dicarboxamide as chiral auxiliary

N,N,N′,N′-Tetra-n-butyl-BINOL-3,3′-dicarboxamide 5d was found to promote phenyl transfer from ethylphenylzinc to both aromatic and aliphatic aldehydes with high enantioselectivity up to 96% ee in tert-butyl methyl ether.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Total synthesis of 5,5′,6,6′-tetrahydroxy-3,3′-biindolyl, the proposed structure of a potent antioxidant found in beetroot (Beta vulgaris)

5,5′,6,6′-Tetrahydroxy-3,3′-biindolyl, the proposed structure of a phenolic antioxidant isolated from the red beetroot (Beta vulgaris), has been synthesised. The spectroscopic data of the synthetic material is not consistent with that reported for the natural product.     

Synthesis of N,N-difluoroboryl complexes of 3,3′-diarylazadiisoindolylmethenes

N,N-Difluoroboryl complexes of 3,3′-diarylazadiisoindolylmethenes were synthesized by the reaction of BF₃·OEt₂ and 3,3′-diarylazadiisoindolylmethenes, which were easily prepared from a reaction between phthalonitrile and aryl Grignard reagents. These novel dyes exhibit strong absorption in the visible region and intense fluorescence in the vis/NIR region. Their synthesis, characterization, and optical properties are reported in this Letter.     

Ordered porous films based on fluorinated polyimide derived from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 3,3′-dimethyl-4,4′-diaminodiphenylmethane

One of fluorinated polyimides was synthesized from 2,2′-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA) and 3,3′-dimethyl-4,4′-diaminodiphenylmethane (DMMDA) by two-steps method, which had good solubility and hydrophilicity. 6FDA-DMMDA polyimide was dissolved in chloroform (CHCl₃) and cast on a glass substrate in a humid atmosphere. It was found that 6FDA-DMMDA/CHCl₃ solution was easy to form ordered porous structure at high concentration, and the reason was discussed in detail. In addition, the influences of solution concentration, the atmosphere humidity, were also tested.