Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Bioaccumulation of antimony, arsenic, and mercury in the vicinities of a large antimony mine, China

To study the characteristics of antimony (Sb) bioaccumulation under high Sb background values, aquatic, amphibious and terrestrial biological samples were collected in the vicinity of the Xikuangshan (XKS) Sb mine area in China. Hydride generation-atomic fluorescence (HG-AFS) analysis showed that Sb concentrations in terrestrial invertebrates (average 30,400 μg kg^− 1 dry wt.) were higher than those in aquatic (average 5200 μg kg^− 1 dry wt.) and amphibian (average 2300 μg kg^− 1 dry wt.) biological samples. Within 1 km distance of the XKS Sb mine area, grasshoppers (Acrida chinensis) and earthworms (Pheretima aspergillum) had the highest Sb amounts of 17,300 ±3200 and 43,600 ± 47,700 μg kg^− 1 dry wt., respectively. No Sb biomagnifications were observed. The bioavailability of Sb was found to be lower than those of As and Hg. A preliminary conclusion is that antagonistic effects exist between Sb and Hg accumulation in biological samples from aquatic environments. Our study is the first to report such antagonistic effects between Sb and Hg. If this deduction proves to be correct, it should be taken into consideration in assessing human health risks, especially when Sb and Hg concentrations in the aquatic environments are high.     

Simultaneous hyperaccumulation of arsenic and antimony in Cretan brake fern: Evidence of plant uptake and subcellular distributions

Arsenic (As) and antimony (Sb) show similar chemical properties and often present together in sulfide ores. Currently, phenomenon of co-contamination of As and Sb at some sites of the world has been increasingly emerged. The present study was conducted to explore the potential of Pteris cretica L. (Cretan brake fern), an arsenic (As) hyperaccumulator, to simultaneously accumulate As and Sb under hydroponic conditions. Arsenic was imposed at medium and high levels of 5 mg L^− 1 and 20 mg L^− 1, while Sb was imposed either single or co-presence with As at medium and high levels of 10 mg L^− 1 and 20 mg L^− 1, with no As and Sb addition as the control. The single and interactive effects of As and Sb on their uptake and subcellular distributions were analyzed. Cretan brake fern could accumulate high concentrations of As and Sb, with the highest concentrations of As and Sb been recorded as 1677.2 mg kg^− 1 and 1516.5 mg kg^− 1 in the fronds, respectively. Arsenic and Sb were found mainly in cytosol, while less in cell wall and cytoplasmic organelles. Sb uptake by Cretan brake fern was enhanced with increasing As levels, which was accompanied with an increase of Sb but a decrease of As in cytosol fractions. Arsenic uptake was slightly enhanced whereas suppressed when Sb was co-present in a medium and high level, respectively; however, in both conditions, As was found to be decreased in cytosol of the above ground parts as fronds and stems of Cretan brake fern. The results demonstrate Cretan brake fern can simultaneously hyperaccumulate As and Sb, thus is valued in phytoremediation of As and Sb co-contamination.     

An effective method for fast determination of artemisinin in Artemisia annua L. by high performance liquid chromatography with evaporative light scattering detection

Artemisinin isolated from the aerial parts of Artemisia annua L., is a promising and potent antimalarial drug, which meets the dual challenge posed by drug-resistant parasites and rapid progression of malarial illness. The aim of the current study was to develop a reliable and fast analytical procedure for the determination of artemisinin in A. annua using high performance liquid chromatography (HPLC) with evaporative light scattering detection (ELSD) in couple with microwave-assisted extraction (MAE) as an efficient sample preparation technique. The HPLC conditions were Agilent C18 column using water:acetonitrile (40:60 v/v) mixture as mobile phase at a flow rate of 1 mL min⁻¹. ELSD conditions were optimized at nebulizer-gas flow rate of 2.0 L min⁻¹ and drift tube temperature of 70 °C under the impactor off-mode, and the gain was set at 2. Afterwards, method validation system for HPLC-ELSD analysis was developed. Calibration range was 0.2-1.0 mg mL⁻¹ and correlation coefficient r was above 0.9990. Precision experiments showed relative standard deviation (R.S.D.) of retention time was less than 0.5% and R.S.D. of peak area was less than 1.30%. Inter-day and intra-day variabilities showed that R.S.D. was ranged from 1.01% to 4.66%. Limit of detection was less than 40 μg mL⁻¹ and limit of quantification was less than 100 μg mL⁻¹. Accuracy validation showed that average recovery was between 98.23% and 104.97%. The developed analytical procedure was successfully applied to determine the contents of artemisinin in the different parts of A. annua plants.     

Determination of quinolizidine alkaloids in Sophora medicinal plants by capillary electrophoresis

A new capillary electrophoresis (CE) method for the determination of quinolizidine alkaloids in Sophora medicinal plants was developed. A total of seven alkaloid components (cytisine, sophocarpine, matrine, lehmannine, sophoranol, oxymatrine and oxysophocarpine) were separated within 15 min. The running buffer was a 50 mM phosphate buffer containing 1%HP-β-CD and 3.3% isopropanol. The linear calibration ranges were 5.50-88.0 μg ml⁻¹ for cytisine and lehmannine, 5.00-88.0 μg ml⁻¹ for sophocarpine and sophoranol, 5.60-89.6 μg ml⁻¹ for matrine and oxysophocarpine, and 24.0-384 μg ml⁻¹ for oxymatrine. The recoveries of the seven alkaloids were 96.0-102.9% with relative standard deviations from 1.50 to 3.00% (n = 5). The method was successfully applied to different Sophora medicinal plants including Sophora flavescens, Sophora tonkinensis and Sophora alopecuroides.     

Use of bioluminescent bacterial sensors as an alternative method for measuring heavy metals in soil extracts

The luminescence based bacterial sensor strains Pseudomonas fluorescens OS8 (pTPT11) for mercury detection and Pseudomonas fluorescens OS8 (pTPT31) for arsenite detection were used in testing their application in detecting heavy metals in soil extracts. Three different soil types (humus, mineral and clay) were spiked with 1, 100 or 500 μg g⁻¹ Hg²⁺ or As³⁺. Samples were taken 1, 14 and 30 days and extracted with water, ammonium acetate, hydrogen peroxide and nitric acid to represent water soluble, bioavailable, organic matter bound and residual fractions, respectively. The lowest mercury-concentration measured using biosensor (0.003 μg kg⁻¹) was considerably lower than by chemical method (0.05 μg kg⁻¹). The sensor strain with pTPT31 appeared to have a useful detection range similar to that of chemical methods. Concentration results with chemical and biosensor analysis were very similar in the case of mercury-spiked samples. Although some of the arsenite samples showed higher variation between methods, it is concluded that the bacteria can be used as an alternative traditional methods for different types of samples.     

Study of antimony (III) binding to soil humic acid from an antimony smelting site

Soil samples were collected from an antimony smelting site in Guangxi Zhuang Autonomous Region, China, at four locations characterized by different land usage, including two cultivated sites: one formerly cultivated and one uncultivated. Surface soils from all four sites were heavily polluted by toxic metals including antimony (Sb), lead (Pb) and arsenic (As), and their concentrations were 410-3330 mg·kg⁻¹, 410-3690 mg·kg⁻¹ and 200-460 mg·kg⁻¹, respectively. In the uncultivated area metal levels were 1.4-6.2 times higher as compared to the formerly and currently agriculture land. Lower levels at the cultivated sites may have resulted from an accumulation of airborne particles by vegetation and lower contents in the surface soil. However, the elevated mercury (Hg) content may reflect both natural and anthropogenic origins in this smelting site. Soil-derived humic acid (HA) from the smelting site reacted directly with Sb (III) aqueous solutions with concentrations of 12, 71 and 143 mg·g⁻¹. The maximum Sb (III) binding to the soil-derived HA was 253 μmol·g⁻¹ (added concentration of 71 mg·g⁻¹) and showed more binding (up to 50%) at lower Sb content.     

‘Total fluorine’ analysis of seed of Australian Gastrolobium spp. showing temporal, spatial and morphological variation

Alkali-fusion in conjunction with a fluoride selective electrode were used to quantify ‘total fluorine’, being organic fluorine + inorganic fluoride, for the seed of 13 species of Gastrolobium from south-west Western Australia. Intact seed covering spatial and temporal distributions, as well as G. bilobum, G. calycinum and G. parviflorum seed dissected into cotyledons and testa + aril, were analysed. Analysis found significant intra-and inter-species variation, both temporally and spatially, with intact seed concentrations ranging from 1.6 ± 0.3 mg kg⁻¹ in G. spinosum from Mundaring to 1063.9 ± 77.8 mg kg⁻¹ for G. cuneatum from Torbay. Approximately 87% of the ‘total fluorine’ was found to be in the seed cotyledons. Additional analysis detected little inorganic fluoride, indicating the majority of fluorine in the seed is organically bound. Parent compound(s) of the fluorine, seed toxicity and the implications of the results for seed chemical defense are discussed.     

Simultaneous determination of trace arsenic(III), antimony(III), total arsenic and antimony in Chinese medicinal herbs by hydride generation-double channel atomic fluorescence spectrometry

A new method was developed for simultaneous determination of trace arsenic and antimony in Chinese herbal medicines by hydride generation-double channel atomic fluorescence spectrometry with a Soxhlet extraction system and an n-octanol-water extraction system, respectively. The effects of analytical conditions on the fluorescence intensity were investigated and optimized. A water-dissolving and methanol-water-dissolving capability were compared. The contents of different species in five Chinese herbal medicines and their decoctions were analyzed. The concentration ratios of n-octanol-soluble As or Sb to water-soluble As or Sb were related to the kinds of medicine and the acidity of the decoction. Soxhlet extraction was found to be an effective method for plants pretreatment for determination of arsenic and antimony species in Chinese herbs; the interferences of coexisting ions were evaluated. The proposed method has the advantages of simple operation, high sensitivity and high speed, with 3σ detection limits of 0.094 μg g⁻¹ for As(III), 0.056 μg g⁻¹ for total As, 0.063 μg g⁻¹ for Sb(III) and 0.019 μg g⁻¹ for total Sb in a 1.0 g of the sample.     

Antimony distribution in soils and plants near an abandoned mining site

A study about antimony distribution and mobility in soils located in the surroundings of an abandoned mining site is carried out. The mineralogical composition of the soils is obtained, and the samples classified into three groups attempting to correlate antimony level and behavior with the main mineral phases present. The total antimony concentrations are measured (5-40 mg kg⁻¹), and mobility of the metalloid is assessed by using selective extractants. Maximum mobility is obtained when extracting with a reducing-complexing medium which, taking into account the characteristics of the zone, means antimony availability to plants should be low. This is verified by analyzing both roots and leaves of vegetation growing in the area. The maximum level present in the leaves is 1.5 mg kg⁻¹ dry matter, but most of the samples show antimony concentrations below 0.5 mg kg⁻¹. The results indicate that plants represent an effective barrier to antimony that is incorporated only in small proportions, and so the risk posed to biota is low.     

Spectrophotometric determination of titanium with o-carboxyphenylfluorone in cationic micellar media, and its equilibrium and kinetic studies

Spectrophotometric determination of titanium(IV) was accomplished with o-carboxyphenylfluorone (OCPF) in the presence of hexadecyltrimethyl ammonium chloride (HTAC) under strongly acidic media. In the determination of titanium(IV), Beer's law was obeyed in the range of 24-340 ng mL⁻¹ with an effective molar absorption coefficient (at 530 nm) and relative standard deviation of 2.24 × 10⁵ dm³ mol⁻¹ cm⁻¹ and 0.64% (n = 8), respectively. The severe interference of iron ions was easily eliminated by the addition of ethylenediaminetetraacetic acid (EDTA); the effects of other foreign substances were low. Equilibrium and kinetic studies under analytical conditions were investigated to quantitatively evaluate the reaction mechanism. The obtained orange complex is considered to be Ti(OCPF)₄. Its stability log K_f and rate constant K_obs are 16.88 and 1.65 × 10⁻² s⁻¹, respectively. It is suggested that the color of the complex is related to the species of OCPF in the solution.     

Evaluation of steviol and its glycosides in Stevia rebaudiana leaves and commercial sweetener by ultra-high-performance liquid chromatography-mass spectrometry

Stevia rebaudiana leaves contain non-cariogenic and non-caloric sweeteners (steviol-glycosides) whose consumption could exert beneficial effects on human health. Steviol-glycosides are considered safe; nonetheless, studies on animals highlighted adverse effects attributed to the aglycone steviol. The aim of the present study was to develop and validate two different ultra-high-performance liquid chromatography methods with electrospray ionization mass spectrometry (UHPLC-MS) to evaluate steviol-glycosides or steviol in Stevia leaves and commercial sweetener (Truvia^®). Steviol-glycosides identity was preliminarily established by UV spectra comparison, molecular ion and product ions evaluation, while routine analyses were carried out in single ion reaction (SIR) monitoring their negative chloride adducts. Samples were sequentially extracted by methanol, cleaned-up by SPE cartridge and the analytes separated by UHPLC HSS C₁₈ column (150 mm × 2.1 mm I.D., 1.8 μm). The use of CH₂Cl₂ added to the mobile phase as source of Cl⁻ enhance sensitivity. The LLOD for stevioside, rebaudioside A, steviolbioside and steviol was 15, 50, 10 and 1 ng ml⁻¹, respectively. Assay validation demonstrated good performances in terms of accuracy (89–103%), precision (<4.3%), repeatability (<5.7%) and linearity (40–180 mg/g). Stevioside (5.8 ± 1.3%), rebaudioside A (1.8 ± 1.2%) and rebaudioside C (1.3 ± 1.4%) were the most abundant steviol-glycosides found in samples of Stevia (n = 10) from southern Italy. Rebaudioside A was the main steviol-glycosides found in Truvia^® (0.84 ± 0.03%). The amounts of steviol-glycosides obtained by the UHPLC-MS method matched those given by the traditional LC-NH₂-UV method. Steviol was found in all the leaves extract (2.7–13.2 mg kg⁻¹) but was not detected in Truvia^® (<1 μg kg⁻¹). The proposed UHPLC-MS methods can be applied for the routine quality control of Stevia leaves and their commercial preparations.     

Langmuir-Blodgett film of p-tert-butylthiacalix[4]arene modified glassy carbon electrode as voltammetric sensor for the determination of Hg(II)

The π-A isotherms and UV-vis spectra of the transferred films suggested that the monolayer of p-tert-butylthiacalix[4]arene can coordinate with Hg²⁺ at the air-water surface. From these observations, a glassy carbon electrode coated with Langmuir-Blodgett film of p-tert-butylthiacalix[4] arene as a new voltammetric sensor is designed for the determination of trace amounts of Hg²⁺. Compared with bare glassy carbon electrode and modified glassy carbon electrode using direct coating method, the Langmuir-Blodgett film-modified electrode can greatly improve the measuring sensitivity of Hg²⁺. Under the selected conditions, the Langmuir-Blodgett film-modified electrode in 0.1 mol L⁻¹ H₂SO₄ + 0.01 mol L⁻¹ KCl solution shows a linear voltammetric response for Hg²⁺ in the range of 5.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹, with a detection limit of 2.0 × 10⁻¹⁰ mol L⁻¹. The proposed method was also applied to determine Hg²⁺ in water samples (tap, lake and river water). In addition, the fabricated electrode exhibited a distinct advantage of simple preparation, non-toxicity, good reproducibility and good stability.     

Discrimination of Ephedra plants with diffuse reflectance FT-NIRS and multivariate analysis

The secondary metabolites of different Ephedra plants are various. Therefore, the discrimination of different Ephedra plants is significant. An objective, easy-to-use, rapid and pollution-free approach is proposed for discriminating Ephedra plants of different species, habitats and picking times on the basis of diffuse reflectance Fourier transform near infrared spectroscopy (FT-NIRS) measurements and multivariate analysis. The Fourier transform near infrared diffuse reflectance spectra (NIRDRS) were acquired from 37 pulverized samples of Ephedra plants put in glass vials in the near infrared (NIR) region between 10 000 and 4000 cm⁻¹, averaging 64 scans per spectrum at a resolution of 4 cm⁻¹. After spectra processing and data pre-processing, spectral data were analyzed respectively with three multivariate analysis techniques: discriminant analysis (DA), self-organizing map (SOM) and back-propagation artificial neural network (BP-ANN). The proposed method could distinguish not only the Ephedra plants of three species and two habitats but also the plants picked at different times of day without special sample treatment and the use of chemical reagents. The performance indexes of the DA model were 84.2-91.9% and the prediction accuracies of both the SOM and the BP-ANN models reached 93.3-100.0%.     

Simultaneous determination of N-acetyl-p-aminophenol and p-aminophenol with poly(3,4-ethylenedioxythiophene) modified glassy carbon electrode

A sensitive and selective method was developed for the determination of N-acetyl-p-aminophenol (APAP) and p-aminophenol (PAP) using poly(3,4-ethylenedioxythiophene) (PEDOT)-modified glassy carbon electrode (GCE). Cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical reaction of APAP and PAP at the modified electrode. Both APAP and PAP showed quasireversible redox reactions with formal potentials of 367 mV and 101 mV (vs. Ag/AgCl), respectively, in phosphate buffer solution of pH 7.0. The significant peak potential difference (266 mV) between APAP and PAP enabled the simultaneous determination both species based on differential pulse voltammetry. The voltammetric responses gave linear ranges of 1.0 × 10⁻⁶-1.0 × 10⁻⁴ mol L⁻¹ and 4.0 × 10⁻⁶-3.2 × 10⁻⁴ mol L⁻¹, with detection limits of 4.0 × 10⁻⁷ mol L⁻¹ and 1.2 × 10⁻⁶ mol L⁻¹ for APAP and PAP, respectively. The method was successfully applied for the determination of APAP and PAP in pharmaceutical formulations and biological samples.     

Spectrofluorometric determination and chemical speciation of trace concentrations of chromium (III & VI) species in water using the ion pairing reagent tetraphenyl-phosphonium bromide

A highly selective, and low cost extractive spectrofluorometric method has been developed for determination of trace concentrations of chromium (III & VI) in water samples using the fluorescent reagent tetraphenylphosphonium bromide (TPP⁺·Br⁻). The method was based upon solvent extraction of the produced ion associate [TPP⁺·CrO₃Cl⁻] of TPP⁺·Br⁻ and halochromate in aqueous HCl and measuring the fluorescence quenching of TPP⁺·Br⁻ in chloroform at λ_ex/em = 242/305 nm. The fluorescence intensity of TPP⁺Br⁻ decreased linearly on increasing the chromium (VI) concentration in the range of 1-114 μg L⁻¹. The limits of detection (LOD) and quantification (LOQ) of chromium (VI) were 0.43 and 1.42 μg L⁻¹, respectively. Chromium (III) species after oxidation to chromium (VI) with H₂O₂ in alkaline solution were also determined. Chemical speciation of chromium (III & VI) species at trace levels was achieved. The method was applied for analysis of chromium in certified reference material (IAEA Soil-7) and in tap- and wastewater samples and compared successfully (>95%) with the inductively coupled plasma-mass spectrometry (ICP-MS) results.     

A simplified approach to the determination of N-nitroso glyphosate in technical glyphosate using HPLC with post-derivatization and colorimetric detection

A simple and sensitive HPLC post-derivatization method with colorimetric detection has been developed for the determination of N-nitroso glyphosate in samples of technical glyphosate. Separation of the analyte was accomplished using an anionic exchange resin (2.50 mm × 4.00 mm i.d., 15 μm particle size, functional group: quaternary ammonium salt) with Na₂SO₄ 0.0075 M (pH 11.5) (flow rate: 1.0 mL min⁻¹) as mobile phase. After separation, the eluate was derivatized with a colorimetric reagent containing sulfanilamide 0.3% (w/v), [N-(1-naphtil)ethilendiamine] 0.03% (w/v) and HCl 4.5 M in a thermostatized bath at 95 °C. Detection was performed at 546 nm. All stages of the analytical procedure were optimized taking into account the concept of analytical minimalism: less operation times and costs; lower sample, reagents and energy consumption and minimal waste. The limit of detection (k = 3) calculated for 10 blank replicates was 0.04 mg L⁻¹ (0.8 mg kg⁻¹) in the solid sample which is lower than the maximum tolerable accepted by the Food and Agriculture Organization of the United Nations.     

Dual-wavelength β-correction spectrophotometric determination of trace concentrations of cyanide ions based on the nucleophilic addition of cyanide to imine group of the new reagent 4-hydroxy-3-(2-oxoindolin-3-ylideneamino)-2-thioxo-2H-1,3-thiazin-6(3H)-one

A simple, fast, low cost and sensitive direct β-correction spectrophotometric assay of cyanide ions based on its reaction with the reagent 4-hydroxy-3-(2-oxoindolin-3-ylideneamino)-2-thioxo-2H-1,3-thiazin-6(3H)-one, abbreviated as HOTT in aqueous media of pH 7-10 is described. The electronic spectrum of the produced brown-red colored species showed well defined and sharp peak at λ_max = 466 nm. The effective molar absorptivity for the produced cyano compound was 2.5 × 10⁴ L mol⁻¹ cm⁻¹. Beer's law and Ringbom's plots were obeyed in the concentration range 0.05-2.0 and 0.30-1.5 μg mL⁻¹ cyanide ions, respectively. The proposed method offers 16.0 and 50.3 μg L⁻¹ lower limits of detection (LOD) and quantification (LOQ) of the cyanide ion, respectively. The analytical utility of the method for the analysis of cyanide ions in tap and drinking water samples was demonstrated and the results were compared successfully with the conventional cyanide ion selective electrode. The short time response and the detection by the naked eye make the method available for the detection and quantitative determination of cyanide in a variety of samples e.g. fresh and drinking water. Moreover, the structure of the produced colored species was determined with the aid of spectroscopic measurements (UV-Vis, IR, ¹H and ¹³C NMR) and elemental analysis.     

Calorimetric investigation of the effect of hydroxyanthraquinones in Rheum officinale Baill on Staphylococcus aureus growth

The inhibitory effects of five hydroxyanthraquinones (HAQs) from root and rhizoma of Rheum officinale Baill, a traditional Chinese medicinal (TCM) herb, on Staphylococcus aureus growth were investigated by calorimetry. The power-time curves of S.aureus with and without HAQ were acquired and the extent and duration of inhibitory effects on the metabolism evaluated by growth rate constants (k₁, k₂), half inhibitory ratio (IC₅₀), maximum heat output (P_max) and peak time (t_p). The value of k₁ and k₂ of S. aureus in the presence of the five HAQs decreased with the increasing concentrations of HAQs. Moreover, P_max was reduced and the value of t_p increased with increasing concentrations of the five drugs. The inhibitory activity varied for different drugs. IC₅₀ of the five HAQs was 4 μg ml⁻¹ for emodin, 3.5 μg ml⁻¹ for rhein, 10 μg ml⁻¹ for aloe-emodin, 1000 μg ml⁻¹ for chrysophanol, 1600 μg ml⁻¹ for physcion. The sequence of antimicrobial activity of the five HAQs: rhein > emodin > aloe-emodin > chrysophanol > physicion.     

p-Aminobenzoate ion determination in pharmaceutical formulations by using a potentiometric sensor immobilized in a graphite matrix

The characteristics, performance, and application of an electrode, namely, Pt|Hg|Hg₂(PABzt)₂| graphite, where PABzt stands for p-aminobenzoate ion, are described. This electrode responds to PABzt with sensivity of (58.1±1.0) mV per decade over the range 1.0×10⁻⁴ to 1.0×10⁻¹ mol l⁻¹ at pH 6.5-8.0 and a detection limit of 3.2×10⁻⁵ mol l⁻¹. The electrode shows easy construction, fast response time (within 10-30 s), low-cost, and excellent response stability (lifetime greater than 6 months, in continuous use). The proposed sensor displayed good selectivity for p-aminobenzoate in the presence of several substances, especially, concerning carboxylate and inorganic anions. It was used to determine p-aminobenzoate in pharmaceutical formulations by means of the standard additions method. The results obtained by using this electrode compared very favorably with those given by an HPLC procedure.