Separation of cis- and trans-isomers of thioxanthene and dibenz[b,e]oxepin derivatives on calixarene- and resorcinarene-bonded high-performance liquid chromatography stationary phases

The chromatographic behavior of six calix[n]arene phases (n=4, 6, 8) and one calix[4]resorcinarene phase is described for the separation of cis- and trans-isomers of three thioxanthene (flupentixol, clopenthixol, chlorprothixene) and one benz[b,e]oxepin derivative (doxepin). The influences of two different organic modifiers (MeOH, MeCN) for the separation of the isomers on every column are described. Different selectivities of the stationary phases exist as a function of the ring size of the calixarenes and their substitution at the "upper rim" with p-tert.-butyl groups. Furthermore, the influence of free phenol groups on the resorcinarene phase is discussed. Relations between structural elements of the analytes and the retention behavior on the stationary phases are found. The selectivity of the calixarene and resorcinarene stationary phases is compared with a RP-C18 phase containing the same base silica. Advantages of the resorcinarene as well as of the calixarene columns exist for the separation of cis- and trans-isomers of three compounds dependent from the substitution in position 2 of the thioxanthenes, respectively the kind of the basic side chain of all substances.     

Influence of pH*-value of methanolic electrolytes on electroosmotic flow in hydrophilic coated capillaries

The dependency of EOF on the H+-concentration and the related so called pH* value of methanolic electrolytes has been examined with poly(ethylene glycol) (PEG), poly(vinyl alcohol) (PVA) and uncoated capillaries. These results were compared with the pH dependency of EOF of these capillaries using aqueous buffers. In uncoated capillaries the dependency of EOF on the pH(*)-value is very similar for aqueous and methanolic electrolytes. The EOF increases with increasing H+-concentration and pH-hysteresis is observed. In PVA coated capillaries the EOF is strongly reduced over wide pH* or pH ranges for both methanolic electrolytes and aqueous buffers. The EOF in PEG coated capillaries is surprisingly directed to the anode with methanolic electrolytes whereas a reduced cathodic EOF is observed in aqueous electrolytes. The anodic EOF of PEG-coated capillaries in methanolic electrolytes is independent of the pH*-value. The usefulness of PEG- and PVA-coated capillaries for adjusting the EOF in non-aqueous electrolytes for the analysis of isomeric organic acids was demonstrated.     

p-tert-Butylcalix[4]arene-1,3-bis(allyloxyethoxy)ether coated capillaries for open-tubular electrochromatography.

The preparation and characterization of p-tert-butylcalix[4]arene-1,3-bis(allyloxyethoxy)ether (CA[4]-BAE) chemically coated capillaries via a free-radical reaction with vinyltriethoxysilane (VTES) that was attached onto the inner wall previously were carried out. IR spectra and decreased electroosmotic flow (EOF) suggested that the capillary was successfully coated with CA[4]-BAE. A slight slope of EOF versus pH at 5 < pH < 9 would help to make the separation reproducible. The CA[4]-BAE-coated capillary showed improved separations of toluidine isomers, naphthol isomers and polycyclic aromatic hydrocarbons (PAHs) compared with an uncoated capillary. The special selectivity indicates that there is a certain extent of host-guest interactions between the solutes and the CA[4]-BAE coating.     

Separation of positional isomers by cucurbit[7]uril-mediated capillary electrophoresis

A novel macrocyclic molecule, cucurbit[7]uril (CB[7]) was for the first time employed as an additive in capillary electrophoresis (CE). In similarity to other macrocyclic molecules, such as crown ethers, cyclodextrins (CDs) and calixarenes, CB[7] can form inclusion complexes with a variety of guest molecules due to its inner cavity. Thus, it can be used like other macrocyclic molecules to manipulate selectivities in CE. During the running process, CB[7] bears a positive charge under the studied pH range (pH 2.5-7) and can be adsorbed onto the inner wall of a fused-silica capillary, leading to a reversal of the electroosmotic flow (EOF). Electrophoretic behaviors of nitrotoluene, nitrophenol, nitroaniline, and methylaniline isomers were studied under various conditions. The electrophoretic separations of the isomers can be accomplished with a buffer containing CB[7]. Furthermore, a probable separation mechanism in the presence of CB[7] was also proposed.     

Electrophoretic separations in poly(dimethylsiloxane) microchips using a mixture of ionic and zwitterionic surfactants

The use of mixtures of ionic and zwitterionic surfactants in poly(dimethylsiloxane) (PDMS) microchips is reported. The effect of surfactant concentration on electroosmotic flow (EOF) was studied for a single anionic surfactant (sodium dodecyl sulfate, SDS), a single zwitterionic surfactant (N-tetradecylammonium-N,N-dimethyl-3-ammonio-1-propanesulfonate, TDAPS), and a mixed SDS/TDAPS surfactant system. SDS increased the EOF as reported previously while TDAPS showed an initial increase in EOF followed by a reduction at higher concentrations. When TDAPS was added to a solution containing SDS, the EOF decreased in a concentration-dependent manner. The EOF for all three surfactant systems followed expected pH trends, with increasing EOF at higher pH. The mixed surfactant system allowed tuning of the EOF across a range of pH and concentration conditions. After establishing the EOF behavior, the adsorption/desorption kinetics were measured and showed a slower adsorption/desorption rate for TDAPS than SDS. Finally, the separation and electrochemical detection of model catecholamines in buffer and reduced glutathione in red blood cell lysate using the mixed surfactant system were explored. The mixed surfactant system provided shorter analysis times and/or improved resolution when compared to the single surfactant systems.     

碱金属掺杂叔丁基杯[4]芳烃体系的结构及非线性光学性质

采用密度泛函理论B3LYP方法得到了M@t-Bu-calix[4]arene和（M@t-Bu-calix[4]arene）Li'（M=Li,Na,K）体系的几何结构. 其中（M@t-Bu-calix[4]arene）Li'（M=Li,Na,K）三个体系各有5个稳定异构体,在前三个异构体中,碱金属与t-Bu-calix[4]arene分子间具有很强的相互作用能,说明了体系的稳定性. 在部分（M@t-Bucalix[4]arene）Li异构体中Li'原子以阴离子形式存在,整个体系表现出碱金属化物的特性. 此外,使用CAMB3LYP方法计算了t-Bu-calix[4]arene及碱金属掺杂后体系的非线性光学性质. 结果表明,t-Bu-calix[4]arene内部掺杂一个碱金属原子M后,体系的一阶超极化率（β₀）有较大提高,而在配体外部又掺杂一个Li原子后,体系具有更大的β₀值. 其中（M@t-Bu-calix[4]arene）Li'体系的MLi'-4异构体表现出最高的β₀值（41827-114354 a.u.）,并且随着M原子序数的增加而逐渐增大. 可见,碱金属掺杂是提高t-Bu-calix[4]arene非线性光学响应的一种有效策略.     

Synthesis of （p-Formylphenyl）azo Calix[4]arenes

Five novel azo calix[4]arenes were reported. The p-aminobenzaldehyde was diazotized with sodium nitrite in aqueous hydrochloride solution. Mono-, bis-, tris- and tetrakis(p-formylphenyl)azo calix[4]arenes (including proximal and distal isomers) were obtained respectively by diazo-coupling in different molar ratio to calix[4]arene(1) under pH=7.5--8.5 at 0-5℃. All (p-formylphenyl)azo calix[4]arenes were characterized by ^1H NMR, ^13C NMR, IR, MS (ESIMS) spectroscopies and elemental analysis.     

Characterization of the SDS-induced electroosmotic flow in micellar electrokinetic chromatography with cationic polyelectrolyte-coated capillaries

Manipulation of the EOF is essential for achieving optimal separations by MEKC. In this paper, we present an extensive investigation of the effect of common experimental conditions on the EOF observed in a capillary coated with poly(diallyldimethylammonium chloride) (PDADMA) polyelectrolyte under MEKC conditions. It was found that highly reproducible cathodal EOF is achieved approximately at or just below the conditional CMC value of SDS in the electrolytes used. At concentrations of SDS greater than the CMC the EOF is independent of pH. The impact of common organic modifiers (ACN, methanol, urea, beta-CD and nonionic surfactant) on the EOF behavior in both a PDADMA-coated capillary and a bare silica capillary is compared. The suppressing effect of organic modifiers on the EOF is much stronger for coated capillary indicating that these compounds additionally reduce the negative charge density on the capillary surface due to alteration of the surfactant coating.     

Self-assembly of palladium(II) and platinum(II) complexes of 2-hydroxypyrimidine to novel metallacalix[4]arenes. Receptor properties through multiple H-bonding interactions

Reaction of [enM(H2O)2](NO3)2 (en = ethylenediamine, M = PdII, PtII) with 2-hydroxypyrimidine (Hpymo) in water results in self-assembly to cyclic complexes of type [enM(pymo-N1,N3)]4(NO3)4 (1, M = PdII; 2, M = PtII) which are structurally analogous to calix[4]arenes. The tetranuclear cations in compounds 1 and 2 adopt, in the solid state, a 1,3-alternate orientation of the pymo residues. Attempts to coordinate either soft (PdII, PtII), borderline (CuII, ZnII), or hard (LaIII, BeII, NaI) metal ions to the oxo surface of the metallacalix[4]arene lower rim were fruitless. In fact, X-ray studies performed on [[enPt(pymo-N1,N3)]4(ClO4)4]2.[Cu(H2O)6](ClO4)2.9H2O (4) showed that multiple H-bonding interactions between the water coordination sphere of the copper center and the oxo surface of two tetranuclear cations take place instead of a direct interaction between the heterometal and the oxo surface of the metallacalix[4]arene. Encapsulation of [Cu(H2O)6]2+ is also responsible for the stabilization of the pinched-cone conformation of the tetranuclear cations in 4. pH* dependent 1H NMR spectra of compounds 1 and 2 indicate a very low basicity of the O-donor group of the pymo residues, revealing no protonation of this position down to pH* 0. Moreover, recrystallization of 2 from strongly acidic aqueous solution (approximately 1 M HClO4) affords the adduct [[enPt(pymo-N1,N3)]4(ClO4)4]2.[H20O8](ClO4)4 (6). Analogously to 4, the cationic [H20O8]4+ species is sandwiched between two tetranuclear cations as a result of multiple H-bonding interactions with the oxo surface of two metallacalix[4]arenes. Again a pinched-cone orientation of the pymo residues is realized.     

Selected applications of cyclodextrin selectors in capillary electrophoresis.

Through the use of alpha-, beta-, gamma- and heptakis(2,6-di-O-methyl)-beta-cyclodextrin as stereospecific selectors or electrolyte modifiers, both in capillary zone electrophoresis and isotachophoresis, selected model isomeric compounds (including optical isomers) were resolved. Soluble alkylhydroxyalkylcellulose derivatives were further added to the cyclodextrin-modified background electrolytes under study. Their presence was found to be essential, as demonstrated by improvements in both enantioselectivity and separation efficiency. The results obtained in both electrophoretic modes, under optimized conditions, are compared and discussed.     

碱金属掺杂叔丁基杯[4]芳烃体系的结构及非线性光学性质

采用密度泛函理论B3LYP方法得到了M@t-Bu-calix[4]arene和(M@t-Bu-calix[4]arene)Li′(M=Li,Na,K)体系的几何结构.其中(M@t-Bu-calix[4]arene)Li′(M=Li,Na,K)三个体系各有5个稳定异构体,在前三个异构体中,碱金属与t-Bu-calix[4]arene分子间具有很强的相互作用能,说明了体系的稳定性.在部分(M@t-Bucalix[4]arene)Li异构体中Li′原子以阴离子形式存在,整个体系表现出碱金属化物的特性.此外,使用CAMB3LYP方法计算了t-Bu-calix[4]arene及碱金属掺杂后体系的非线性光学性质.结果表明,t-Bu-calix[4]arene内部掺杂一个碱金属原子M后,体系的一阶超极化率(β0)有较大提高,而在配体外部又掺杂一个Li原子后,体系具有更大的β0值.其中(M@t-Bu-calix[4]arene)Li′体系的MLi′-4异构体表现出最高的β0值(41827-114354 a.u.),并且随着M原子序数的增加而逐渐增大.可见,碱金属掺杂是提高t-Bu-calix[4]arene非线性光学响应的一种有效策略.     

Using of S-(-)-2-hydroxymethyl-1,1-dimethylpyrrolidinium tetrafluoroborate as additive to the background electrolyte in capillary electrophoresis

We synthesised and used new type of quaternary ammonium salt [S-(-)-2-hydroxymethyl-1,1-dimethylpyrrolidinium tetrafluoroborate] as effective additive to acidic background electrolytes. We used this quaternary ammonium salt as effective agent for capillary zone electrophoresis separation of model mixture of five tricyclic antidepressants (amitriptyline, nortriptyline, imipramine, desipramine and clomipramine) as model analytes. We observed that addition of S-(-)-2-hydroxymethyl-1,1-dimethylpyrrolidinium tetrafluoroborate ([HMDP](+) [BF(4)](-)) to acidic background electrolytes leads to suppression of magnitude of electroosmotic flow (EOF) and gradually change the direction of the EOF. Baseline separation of five TAs was achieved by using of 91.1 mmol L(-1) (20 gL(-1)) of [HMDP](+) [BF(4)](-) in 25 mmol L(-1) sodium phosphate pH 2.5, where electroosmotic mobility was -11.3 x 10(-9) m(2) V(-1) s(-1). We achieved baseline separation of five TAs with using of [HMDP](+) [BF(4)](-) as water solution too. We observed that [HMDP](+) [BF(4)](-) can be used as buffer additive, which offers relatively smaller anodic electroosmotic flow instead of cationic surfactants that are mostly used for genarating of anodic electroosmotic flow in capillary electrophoresis.     

Suppression of electroosmotic flow and its application to determination of electrophoretic mobilities in a poly(vinylpyrrolidone)-coated capillary

A hydrophilic polymer, poly(vinylpyrrolidone) (PVP), was employed for suppressing the electroosmotic flow (EOF). A capillary was filled with aqueous PVP solution for coating the capillary wall with PVP; the PVP solution was then replaced by a migration buffer solution containing no PVP. Three types of PVP with different molecular weights were examined. The EOF was suppressed more effectively as the molecular weight of PVP increased. The EOF in the coated capillary was approximately 10-fold smaller than that of a bare capillary and was constant in the pH range of 6-8. The suppressed EOF was stable even when no PVP was added to the migration buffer. However, the EOF increased significantly when sodium dodecyl sulfate was added into the migration buffer. The method was applied for determining the electrophoretic mobilities of inorganic anions that have negative electrophoretic mobilities larger than the electroosmotic mobility of the bare capillary. A novel method for determining the electrophoretic mobilities was proposed based on the linear relationship between electric current and electrophoretic mobility. The electrophoretic mobility was proportional to the electric current. Therefore, the intercept of the regression equation represents the electrophoretic mobility at room temperature. The electrophoretic mobilities were in good agreement with the absolute electrophoretic mobilities.     

葫［7］环联脲作为毛细管电泳分离介质的研究

以葫［7］环联脲(CB［7］)作为毛细管电泳添加剂,成功地分离了6种硝基苯类化合物。考察了pH值对电渗流的影响,初步评价了其基本的电泳性能,结果表明在所考察的pH值范围内(pH 2~6.5),葫［7］环联脲是质子化的,且吸附到毛细管内壁上,这使得毛细管内壁带上正电荷,电渗流反向;初步考察了葫［7］环联脲的浓度对分离的影响,证明了用葫［7］环联脲作为添加剂可完全分离对硝基乙苯、对硝基甲苯、对氯硝基苯、间二硝基苯、2,4-二硝基氯苯和硝基苯这6种物质,最佳的缓冲液为10 mmol/L Na2HPO4（用盐     

Micellar electrokinetic chromatography (MEKC) separation of furanonaphthoquinones from Tabebuia impetiginosa

The separation of nine furanonaphthoquinones by micellar electrokinetic chromatography (MEKC) is described. The running electrolytes used in this method were 0.03 M sodium dodecyl sulphate (SDS) in 0.09 M borate buffer (pH 9) containing 10% methanol, with an applied voltage of 20 kV. Application of this technique in the determination of the main furanonaphthoquinones, 5-hydroxy-2-(1-hydroxyethyl)naphtho[2,3-b]furan-4,9-dione, 8-hydroxy-2-(1-hydroxyethyl)naphtho[2,3-b]furan-4,9-dione, and 2-(1-hydroxyethyl)naphtho[2,3-b]furan-4,9-dione, of Tabebuia impetiginosa is demonstrated in this paper.     

Preparation and characterization of calixarene-coated capillaries for capillary electrophoresis

Preparation and characterization of calixarene-coated capillaries for capillary electrophoresis (CE) were exemplified with p-allylcalix[4]arene (pACX4) which was immobilized to the fused silica surface using gamma-methacryloxypropyl-trimethoxysilane (gamma-MAPS) as linking agent. Successful gamma-ACX4 coating was suggested by the greatly decreased electroosmotic flow (EOF), due to the introduction of phenolic hydroxyl groups on the inner surface of the capillaries. A slight slope of EOF versus pH at pH <8 would help make the separation reproducible. The coated columns also featured a low ultraviolet (UV) absorption background and long lifetime (> 6 months at 4相似文献   

On the unprecedented level of dinitrogen activation in the calix[4]arene complex of Nb(III)

The calix[4]arene niobium(III) complex ([L]Nb-N=N-Nb[L] where [L] = p-tert-butylcalix[4]arene), reported to bind N(2) in a μ(2)-linear dimeric capacity and to activate the N(2) triple bond to 1.39 ?, corresponding to the longest N(2) bond known in the end-on coordination mode, was subjected to a computational investigation involving both density functional and wavefunction based methods to establish the basis for the unprecedented level of activation. Replacement of the calix[4]arene ligand with hydroxide or methoxide ligands reveals that the organic backbone structure of the calix[4]arene ligand exerts negligible electronic influence over the metal centre, serving only to geometrically constrain the coordinating phenoxide groups. A fragment bonding analysis shows that metal-to-dinitrogen π* backbonding is the principal Nb-N interaction, providing a strong electronic basis for analogy with other well-characterised three- and four-coordinate complexes which bind N(2) end-on. While the calculated structure of the metallacalix[4]arene unit is reproduced with high accuracy, as is also the Nb-Nb separation, the calculated equilibrium geometry of the complex under a variety of conditions consistently indicates against a 1.39 ? activation of the N(2) bond. Instead, the calculated N-N distances fall within the range 1.26-1.30 ?, a result concordant with closely related three- and four-coordinate μ(2)-N(2) complexes as well as predictions derived from trends in N-N stretching frequency for a number of crystallographically characterized linear N(2) activators. A number of potential causes for this bond length discrepancy are explored.     

Evaluation of electroosmotic markers in aqueous and nonaqueous capillary electrophoresis

The most common method to determine the EOF in CE is to measure the migration time for a neutral marker. In this study, 12 compounds (three novel and some previously used) were investigated as EOF markers in aqueous and nonaqueous BGEs. In the aqueous buffer systems (ammonium acetate, sodium phosphate, and sodium borate) the evaluation included a wide pH range (2–12). Two BGEs contained chiral selectors (sulphated‐β‐CD, (?)‐diketogulonic acid) and one that contained a micellar agent (SDS) were included in the study. The majority of the evaluated compounds were found to migrate with the EOF in the water‐based BGEs and are thus useful as EOF markers. However, in the SDS‐based BGE only four of the compounds (acetone, acrylamide, DMSO, and ethanol) were found to be applicable. In the nonaqueous BGEs 11 markers (acetone, acetophenone, acrylamide, anthracene, benzene, 4‐(4‐methoxybenzylamino)‐7‐nitro‐2,1,3‐benzoxadiazole, benzyl alcohol, 2,5‐diphenyloxazole, ethanol, flavone, and mesityl oxide) seemed to be functional as EOF markers. Even though several of the evaluated compounds can be used as EOF markers in the investigated BGEs, the authors would recommend the use of acrylamide as a general marker for UV detection. Furthermore, the four fluorescent markers (of which three were novel) gave RSD values equal to the other markers and can be used for the determination of the EOF in CE or microchip CE with fluorescence detection.     

A novel sol-gel calix[4]arene-modified capillary column for open-tubular capillary electrochromatography

A novel open-tubular CEC (OT-CEC) column was prepared by immobilized 5,11,17,23-tetra-tert-butyl-25,27-diethoxy-26,28-dihydroxy-calix[4]arene (Calix[4]) on fused-silica capillary column with sol-gel technology. Calix[4] was initially reacted with gamma-glycidoxypropyltrimethoxysilane (KH-560) to form a new sol-gel precursor (calix[4]-KH-560), and then mixed with another precursor, namely tetraethoxysilane (TEOS). After hydrolysis and condensation, a sol-gel matrix was obtained, in which calix[4] was incorporated. Successful calix[4]-modified sol-gel coating was suggested by infrared (IR) spectra and greatly decreased EOF. In comparison with OT columns prepared by the sol-gel method with TEOS and KH-560 only, the calix[4]-modified sol-gel column showed greatly improved separation of isomeric toluidines, nitrophenols, picolines and neurotransmitters with structural similarity. Migration time and theoretical plate number reproducibility were satisfactory with RSDs less than 1 and 6% each for within column runs and not more than 3 and 7% each for column-to-column measurements, using toluidine and nitrophenol isomers as test solutes on this column. High separation efficiencies (96,000-300,000 plates/m) for basic toluidine isomers were obtained. This column was also successfully employed to combine extraction procedure for the determination of dopamine (DA) and norepinephrine (NE) in Portulaca oleracea L. The recoveries of DA and NE were 93.3 and 94.2%, respectively.     

Electroosmotic flow-switchable poly(dimethylsiloxane) microfluidic channel modified with cysteine based on gold nanoparticles

An electroosmotic flow (EOF)-switchable poly(dimethylsiloxane) (PDMS) microfluidic channel modified with cysteine has been developed. The native PDMS channel was coated with poly(diallyldimethylammonium chloride) (PDDA), and then gold nanoparticles by layer-by-layer technique was assembled on PDDA to immobilize cysteine. The assembly was followed by infrared spectroscopy/attenuated total reflection method, contact angle, EOF measurements and electrophoretic separation methods. EOF of this channel can be reversibly switched by varying the pH of running buffer. At low pH, the surface of channels is positively charged, EOF is from cathode to anode. At high pH, the surface is negatively charged, EOF is from anode to cathode. At pH 5.0, near the isoelectric point of the chemisorbed cysteine, the surfaces of channels show neutral. When pH is above 6.0 or below 4.0, the magnitude of EOF varies in a narrow range. And the modified channel surface displayed high reproducibility and good stability, a good reversibility of cathodic-anodic EOF transition under the different pH conditions was observed. Separation of dopamine and epinephrine as well as arginine and histidine were performed on the modified chip.