Effect of sorbitan-based surfactants on glass transition temperature of cellulose esters

Thermal behavior of mixtures composed of cellulose acetate butyrate (CAB), carboxymethylcellulose acetate butyrate (CMCAB), or cellulose acetate phthalate (CAPh), and sorbitan-based surfactants was investigated as a function of mixture composition by means of differential scanning calorimetry (DSC). Surfactants with three different alkyl chain lengths, namely, polyoxyethylenesorbitan monolaurate (Tween 20), polyoxyethylenesorbitan monopalmitate (Tween 40), and polyoxyethylene sorbitan monostearate (Tween 60) were chosen. DSC measurements revealed that Tween 20, 40, and 60 act as plasticizers for CAB, CMCAB, and CAPh (except for Tween 60), leading to a dramatic reduction of glass transition temperature (T _g). The dependence of experimental T _g values on the mixture composition was compared with theoretical predictions using the Fox equation. Plasticization was strongly dependent on mixture composition, surfactant hydrophobic chain length, and type of cellulose ester functional group.     

Comparative Analysis of the Properties of Tween‐20, Tween‐60, Tween‐80, Arlacel‐60, and Arlacel‐80

Foamability and foam stability, emulsifying power, surface tension, and interfacial tension were investigated for Tween‐20 (polyoxyethylene sorbitan monolaurate), Tween‐60 (polyoxyethylene sorbitan monostearate), Tween‐80 (polyoxyethylene sorbitan monooleate), Arlacel‐60 (Sorbitan stearate), and Arlacel‐80 (Sorbitan oleate). Among all the surfactants tested for their foaming power and foamabilty, Arlacel‐60 and Arlacel‐80 showed the best results; the foaming power and foamability was found to be 100%. The surfactants having foam stability more than 50% can be considered as metastable and those less than 50% are considered as low‐stability foams. In case of surface tension and interfacial tension property measurements, Arlacel‐80 showed the best results. At 1% surfactant concentration, the surface tension and interfacial tension of Arlacel‐80 was found to be 29.9 dynes/cm and 1.1 dynes/cm at 30°C ambient temperature. Also, Arlacel‐60 was found to exhibit the best emulsifying power among all the surfactants tested. At 30°C, the emulsifying property of Arlacel‐60 was 6 hours.     

Characterization of Binary Surfactant Mixtures (Cetylpyridinium Chloride and Tween 60) in an Aqueous Medium

Abstract

Micellar properties of the binary surfactant mixtures of cetylpyridinium chloride (CPC) and polyoxyethylene (20) sorbitan monostearate (Tween‐60) have been investigated in detail using tensiometric, conductometric, spectrophotometric, and fluorimetric techniques. The critical micelle concentration (CMC), counterion binding, interfacial adsorption, energetics of micellization, and micellar dielectric constant have been evaluated. The theories of Clint, Motomura, Rubingh, and Sarmoria, Puvvada and Blankschtein have been followed to understand the CMC, composition, activity coefficients, and synergism of the binary surfactant systems.     

Single-crystalline platinum nanosheets from nonionic surfactant 2-D self-assemblies at solid/aqueous solution interfaces

Single-crystalline platinum nanosheets have been prepared via a new methodology based on the chemical reduction of a platinum salt (H2PtCl6) with hydrazine at a graphite/solution interface, using polyoxyethylene (20) sorbitan monostearate (Tween 60) based self-assembly (hemicylindrical micelle) templates. The platinum nanosheets with a uniform thickness of as thin as 3.5 +/- 1 nm are surface-smooth and continuous over relatively large length scales of micrometer sizes. In striking contrast to the Tween 60 based system, no Pt nanosheets are obtained with nonaethylene glycol monododecyl ether (C12EO9) and polyoxyethylene (23) dodecyl ether (C12EO23). No Pt nanosheets are also obtainable with a laterally homogeneous layer of Tween 60 formed at the silica/solution interface. These results indicate that surfactant Tween 60 molecules with a triple polyoxyethylene structure, as well as their hemicylindrical micelle templates, play an essential role for the formation of the Pt nanosheets. It is also suggested that the interfacially directed growth of Pt metals within the aqueous shells of the Tween 60 hemicylindrical micelles induces the thin Pt crystals as thick as the aqueous shells. The present approach could be extended to prepare a wide range of novel nanostructures of noble metals, using various micelle-like self-assemblies at interfaces.     

A triptycene-based approach to solubilising carbon nanotubes and C60

We describe herein the synthesis of a triptycene-based surfactant designed with the ability to solubilise single-walled carbon nanotubes (SWNTs) and C(60) in water through non-covalent interactions. Furthermore, an amphiphilic naphthalene-based surfactant with the same ability to solubilise SWNTs and C(60) has also been prepared. The compounds synthesised were designed with either two ionic or non-ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Effects of surfactants on the morphology of composite polymer particles produced by two‐stage seeded emulsion polymerization

Poly(methyl methacrylate) (PMMA)–polystyrene (PS) composite polymer particles were synthesized in the presence of a surfactant by two‐stage seeded emulsion polymerization. The first stage was the synthesis of PMMA particles by soapless emulsion polymerization; the second stage was the synthesis of the PMMA–PS composite polymer particles with the PMMA particles as seeds. In the second stage of the reaction, three kinds of surfactants—sodium laurate sulfate (SLS), polyoxyethylene (POE) sorbitan monolaurate (Tween 20), and sorbitan monolaurate (Span 20)—were used to synthesize the PMMA–PS composite particles. Both the properties and concentrations of the surfactants influenced the morphology of the composite particles significantly. Core–shell composite particles, with PS as the shell and PMMA as the core, were synthesized in the presence of a low concentration of the hydrophilic surfactant SLS. This result was the same as that in the absence of the surfactant. However, a low concentration of Tween 20 led to composite particles with a core/strawberry‐like shell morphology; the core region was a PS phase, and the strawberry‐like shell was a PS phase dispersed in a PMMA phase. With an increase in the concentration of SLS, the morphology of the composite particles changed from core (PMMA)–shell (PS) to core (PS)–shell (PMMA). Moreover, the effects of a high concentration of Tween 20 or Span 20 on the morphology of the PMMA–PS composite particles were investigated in this study. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2224–2236, 2005     

Remarkably enhanced inhibitory effects of three-component hybrid liposomes including sugar surfactants on the growth of lung carcinoma cells

Sugar parts play important roles in recognizing molecules on the cell membranes. We successfully produced sugar-type micellar surfactants, lactonoalkylamide (LacCn), for the first time. Spherical vesicles, three-component hybrid liposomes, were obtained after the sonication of the mixture of L-alpha-dimyristoyl-phosphatidylcholine (DMPC), Tween 20 and LacCn (DMPC:Tween 20:LacCn=65:7:28). It is noteworthy that high inhibitory effects of the three-component hybrid liposomes composed of DMPC, Tween 20, and LacCn (DMPC:Tween 20:LacCn=65:7:28) on the growth of glioma (U251) and lung adenocarcinoma (RERF-LC-OK) cells were attained in vitro without any drug, although no significant inhibitory effects of any individual component (DMPC, Tween 20, LacCn) or the two-component hybrid liposomes of DMPC and Tween 20 on the growth of tumor cells examined were obtained.     

Preparation of finely dispersed O/W emulsion from fatty acid solubilized in subcritical water

A novel method for preparing a finely dispersed oil-in-water emulsion is proposed. Octanoic acid dissolved in water at a high temperature of 220 or 230 degrees C at 15 MPa was combined with an aqueous solution of a surfactant and then the mixture was cooled. When a nonionic surfactant, decaglycerol monolaurate (ML-750) or polyoxyethylene sorbitan monolaurate (Tween 20), was used, fine emulsions with a median oil droplet diameter of 100 nm or less were successfully prepared at ML-750 and Tween 20 concentrations of 0.083% (w/v) and 0.042%, respectively, or higher. The diameters were much smaller than those of oil droplets prepared by the conventional homogenization method using a rotor/stator homogenizer. However, an anionic surfactant, sodium dodecyl sulfate, was not adequate for the preparation of such fine emulsions by the proposed method. Although the interfacial tensions between octanoic acid and the surfactant solutions were measured at different temperatures, they were not an indication for selecting a surfactant for the successful preparation of the fine emulsion by the proposed method.     

The Effect of Temperature on Sorbitan Surfactant Monolayers

The effect of temperature on four sorbitan ester (Span 20, sorbitan monolaurate; Span 40, sorbitan monopalmitate; Span 60, sorbitan monostearate; and Span 80, sorbitan monooleate) monolayers was analyzed. The covered temperature range was from 22 to 42 degrees C. Surface pressure-molecular area isotherms were measured with a Langmuir-type instrument. As the temperature was increased, the monolayers expanded more. This change can also be seen from the surface compressional modulus that was lowered as the temperature was increased. Also, the collapse pressure was lowered as the temperature was increased. Copyright 2001 Academic Press.     

Cationic vesicles consisting of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and phosphatidylcholines and their interaction with erythrocyte membrane

We studied the formation and stability of vesicles consisting of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and phosphatidylcholines by electron spin resonance (ESR) analysis and observation of their hemolytic activities. In contrast with previous findings on dimethyldialkylammoniums, DOTAP formed vesicles at 37 degrees C with phosphatidylcholines containing either saturated acyl chains such as dimyristoylphosphatidylcholine (DMPC) or unsaturated acyl chains such as dilinoleoylphosphatidylcholine (DLPC). Phosphatidylcholines made the bilayer more rigid and significantly reduced the hemolytic activity of DOTAP. In the presence of equimolar concentration of DOTAP and phosphatidylcholines, formation of tightly aggregated structures of several erythrocytes was observed, as previously reported for the vesicles containing dimethyldipalmitylammonium. These findings indicate that DOTAP vesicles were stabilized by phosphatidylcholines with either saturated acyl chains or unsaturated acyl chains, and the interaction with the lipid bilayer of biological membranes as cationic vesicles became prominent with minimal membrane damage by DOTAP monomers.     

Properties of various phospholipid mixtures as emulsifiers or dispersing agents in nanoparticle drug carrier preparations

The characteristics of mixed phospholipids were examined when used as dispersing agents and emulsifiers. Synthesized phospholipids were mixed to investigate the potential effects of different hydrophilic or lipophilic groups on emulsification and dispersion. To examine the effects of the hydrophilic polar head group on the dispersing or emulsifying potency of phospholipids, l--phosphatidylcholine dimyristoyl (DMPC) and l--phosphatidylethanolamine dimyristoyl (DMPE) were mixed in various ratios. Moreover, all combinations of two kinds of phosphatidylcholines (PCs) out of l--phosphatidylcholine dilauroyl (DLPC), DMPC, l--phosphatidylcholine dipalmitoyl (DPPC) and l--phosphatidylcholine distearoyl (DSPC) were tested (50:50, w/w) to examine the effects of the hydrophobic carbon chains on the dispersing or emulsifying potency of phospholipids. Mean diameters of vesicles and O/W emulsions prepared by sonication were measured. Vesicles prepared with DMPC–DMPE mixtures gave larger particle sizes than those of DMPC alone. Particle sizes of vesicles prepared with a mixture of two kinds of PCs increased when adding a PC with a longer carbon chain, while particle sizes in a mixture with a PC having a shorter carbon chain was comparable to those in pure PC. In vesicles that were generated by hydration of phospholipids and had a bilayer form, the physical form of the phospholipids consisting of bilayers was thought to be an important factor influencing particle sizes. Among the emulsions, DMPC–DMPE mixtures gave a similar droplet size to DMPC alone. Droplet size in emulsions prepared with a mixture of two kinds of PCs had a strong positive correlation with the total number of carbons, which corresponds to hydrophilic–lipophilic balance (HLB). In O/W emulsions, in which phospholipids were absorbed at water–oil interfaces and which have a single layer form, HLB was thought to be a major factor in the determination of particle size; likewise with non-ionic emulsifiers.     

Characterization of Cinnamic Acid-Attached Nonionic Amphiphiles in UV Extinction,Emulsification, and In Vitro Toxicity

Cinnamic acid (CA) was covalently attached to nonionic surfactants by condensation reaction. The mass and the molar extinction coefficient of CA residue of each conjugate did not markedly deviate from those of free CA, indicating CA could absorb the UV light after being conjugated to the surfactants. When the concentration of the conjugates in aqueous phase was 0.1% and 1.0%, mineral oil could readily be emulsified by polyoxyehtylene(20) cetyl ether–CA conjugate (CE20–CA), polyoxyethylene(20) oleyl ether–CA conjugate (OE20–CA), and polyoxyehtylene(20) sorbitan monolaurate–CA conjugate (Tween 20–CA). The extinction coefficients of the surfactant–CA conjugates contained in O/W emulsion did not markedly deviate from those of the conjugates dissolved in water, suggesting that the conjugate could maintain their extinction coefficients when they coexisted with oil droplets. According to the result of 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay, the viability of cell (BALB/c 3T3 clone A31) was greater than 80% for all the surfactant–CA conjugates tested when the conjugate concentration was 0.2%. It is believed that CE20–CA, OE20–CA, and Tween 20–CA could be used as an emulsifier which absorbs UV light effectively.     

Synthesis of high surface area hydroxyapatite nanoparticles by mixed surfactant-mediated approach

A new surfactant-mediated approach was developed to synthesize hydroxyapatite (HAp) nanoparticles with high surface areas by calcination of their precursors encapsulated with calcium stearate using mixed surfactant-containing reaction mixtures. Acidic aqueous solution of calcium phosphate was mixed with both or either nonaoxyethylene dodecyl ether (C12EO9) and polyoxyethylene(20) sorbitan monostearate (Tween 60) and then was treated with aqueous ammonium at 25 degrees C. The C12EO9-based single surfactant system yielded an aggregate of platy HAp nanoparticles 20-40 nm in size, whereas the Tween 60-based single and mixed systems led to lath-shaped HAp nanoparticles 2-8 nm wide and encapsulated with calcium stearate. On calcination at 500 degrees C, the stearate-encapsulated HAp nanoparticles in the latter two systems were deorganized into high surface area HAp nanoparticles. Particularly, the HAp nanoparticles in the mixed system exhibited a specific surface area as high as 364 m2 g(-1) that is roughly 3 times larger than 160 m2 g(-1) for those in the single system. The significantly high surface area for the former is attributed to much less adhesion of decapsulated HAp nanoparticles, which originated from the particle-separating effect of the C12EO9 molecules adsorbed on the outer surface of the stearate-encapsulated HAp nanoparticles to inhibit their agglomeration or interfacial coordination. The present results demonstrate that the mixed use of two different surfactants as a source of encapsulating and templating agent and a particle-separating agent is specifically effective for the synthesis of high surface area HAp nanoparticles.     

Micellization of dissymmetric cationic gemini surfactants and their interaction with dimyristoylphosphatidylcholine vesicles

The micellization process of a series of dissymmetric cationic gemini surfactants [CmH2m+1(CH3)2N(CH2)6N(CH3)2C6H13]Br2 (designated as m-6-6 with m = 12, 14, and 16) and their interaction with dimyristoylphosphatidylcholine (DMPC) vesicles have been investigated. In the micellization process of these gemini surfactants themselves, critical micelle concentration (cmc), micelle ionization degree, and enthalpies of micellization (DeltaHmic) were determined, from which Gibbs free energies of micellization (DeltaGmic) and entropy of micellization (DeltaSmic) were derived. These properties were found to be influenced significantly by the dissymmetry in the surfactant structures. The phase diagrams for the solubilization of DMPC vesicles by the gemini surfactants were constructed from calorimetric results combining with the results of turbidity and dynamic light scattering. The effective surfactant to lipid ratios in the mixed aggregates at saturation (Resat) and solubilization (Resol) were derived. For the solubilization of DMPC vesicles, symmetric 12-6-12 is more effective than corresponding single-chain surfactant DTAB, whereas the dissymmetric m-6-6 series are more effective than symmetric 12-6-12, and 16-6-6 is the most effective. The chain length mismatch between DMPC and the gemini surfactants may be responsible for the different Re values. The transfer enthalpy per mole of surfactant within the coexistence range may be associated with the total hydrophobicity of the alkyl chains of gemini surfactants. The transfer enthalpies of surfactant from micelles to bilayers are always endothermic due to the dehydration of headgroups and the disordering of lipid acyl chain packing during the vesicle solubilization.     

A new modified low-energy emulsification method for preparation of water-in-diesel fuel nanoemulsion as alternative fuel

In this research, 24 of water-in-diesel fuel nanoemulsions were prepared using mixed nonionic surfactants of sorbitan monooleate and polyoxyethylene sorbitan trioleate (MTS). The emulsions were formed using a new modified low-energy method at hydrophilic-lipophilic balance (HLB) value of 10 and a working temperature of 20°C. Five HLB values of 9.6, 9.8, 10, 10.2, and 10.4 were prepared to identify the optimum value that gives low water droplet size at working conditions as: 5 wt% of water contents, 10 wt% of mixed surfactant concentration, and a temperature of 20°C. The effect of mixed surfactant concentration and water content on the droplet size for 0, 15, 30, 60, and 90 days has been studied. Droplet size of the prepared nanoemulsions was determined by dynamic light scattering and the nanoemulsion stability was assessed by measuring the variation of the droplet size as a function of time. Results show that the mean droplet sizes were formed between 26.23 and 277.1 nm depending on the surfactant concentrations, water contents, and storage time.     

疏水链长对聚氧乙烯失水山梨醇脂肪酸酯界面扩张流变性质的影响

利用悬挂滴方法研究了系列聚氧乙烯失水山梨醇脂肪酸酯(TweenX)在正癸烷-水界面的扩张流变性质. 实验结果表明, 疏水烷基链长较短的Tween20 分子在界面上吸附量较大, 分子排列更紧密, Tween40 和Tween60具有大致相同的“有效截面积”, 导致饱和吸附时界面张力(γ_cmc)比较接近. TweenX浓度大于临界胶束浓度(cmc)时, 由于Tween20 分子排列的更加紧密, 模量和弹性大于Tween40 和Tween60. 当TweenX的疏水烷基链长达到一定长度时, TweenX的界面膜性质受疏水链长的影响减弱, Tween40和Tween60的扩张参数相差不大.     

Release studies on niosomes containing fatty alcohols as bilayer stabilizers instead of cholesterol

Monomers of some amphiphiles organize into bilayers to form liposomes and niosomes. Such bilayers are unstable or leaky and hence cholesterol is a common ingredient included to stabilize them. Cholesterol stabilizes bilayers, prevents leakiness, and retards permeation of solutes enclosed in the aqueous core of these vesicles. Other than cholesterol a material with good bilayer-stabilizing properties is yet to be identified. We have substituted cholesterol with fatty alcohols in niosomes containing polyglyceryl-3-di-isostearate (PGDS) and polysorbate-80 (PS-80) to explore their membrane-stabilizing property via permeation studies. Niosomes of polyglyceryl-3-di-isostearate, fatty alcohol/cholesterol, and polysorbate were prepared by ether injection method. Aqueous solution of ketorolac tromethamine (KT) was entrapped in them. The effects of alkyl chain length of fatty alcohols (C(12), C(14), C(16), C(18), and C(16+18)), of acyl chain length of polyoxyethylene sorbitan monoester surfactants, and of the molar ratio of lipid mixture on the release rate of ketorolac from niosomes were assessed by employing modified dissolution-dialysis method. Niosomes with cholesterol or fatty alcohols have exhibited a common release pattern. Niosomes containing fatty alcohol showed a considerably slower release rate of KT than those containing cholesterol. Based on the release rate, fatty alcohols can be ranked as stearyl相似文献   

Fluorescence and dynamic light scattering studies of niosomes-membrane mimetic systems

Niosomal vesicles are more stable than liposomal vesicles due to higher chemical stability of surfactants compared to phospholipids. Niosomes have been prepared from Span20, Span80, Tween20 and Tween80. Fluorescence resonance energy transfer studies have been performed in these systems to determine donor-acceptor distances. It has been found that the fluorescence resonance energy transfer efficiency is better in niosomes compared to micelles. The formation of niosomes is guided by the hydrophile-lipophile balance value of the nonionic surfactant.     

Micellization and surface properties of aqueous solutions of binary mixtures of tween-80 and bromide cetyltrimethylammonium

The physicochemical properties of solutions of mixtures of cationic (cetiltrimethylammonum bromide) and nonionic (polyoxyethylene (20) sorbitan monooleate) surfactant, i.e., Tween-80, have been studied. The critical concentration of micellization, adsorption at the interface of a mixture of surfactants solution/air, and the minimum area occupied by a surfactant molecule have been determined. It was shown that, in the whole region of ratios between surfactants, sinergic effects are observed for both micellization and for the process of adsorption at the interface of a mixture of surfactants solution/air. The results obtained have been analyzed according to the regular solution theory (RST).