Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

Influence of the Molecular Mass of Poly(<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone) on Formation of Cu<Subscript>2</Subscript>O Nanoparticles During Reduction of Divalent Copper Ions with <Emphasis Type="Italic">tert</Emphasis>-Butylamine Borane in Polymer Solution

The process of reduction of divalent copper ions with tert-butylamine borane in dilute aqueous solutions of poly(N-vinylpyrrolidone) is investigated. The influence of polymer molecular mass on properties of the resultant Cu₂O sols is studied. It is shown that Cu₂O nanoparticles with an average diameter of 6–8 nm independent of polymer molecular mass and a relatively narrow size distribution of particles are formed in the systems under study. The contour length of macromolecules and the hydrodynamic diameter of a poly(N-vinylpyrrolidone) macromolecular coil are compared with the diameter of Cu₂O particles. Poly(N-vinylpyrrolidone) with M ≥ 1 × 10⁴ can be used to produce Cu₂O nanoparticles. Poly(N-vinylpyrrolidone) with M > 4 × 10⁴ should be used for the formation of long-living Cu₂O sols.     

Exchange reactions of urethanes with proton-donating compounds: Kinetics of the reactions of phenyl-<Emphasis Type="Italic">N</Emphasis>-phenylurethane with butyl alcohols

The exchange reactions of phenyl-N-phenylurethane with aliphatic alcohols, namely, n-butyl, sec-butyl, and tert-butyl alcohols, in ortho-dichlorobenzene and in the media of the corresponding alcohols were studied. In the absence of a catalyst and proton-donating compounds, the monomolecular cleavage of phenyl-N-phenylurethane to isocyanate and alcohol proceeds at a noticeable rate starting only at 250°C. Between 40 and 80°C, the exchange reactions take place via direct exchange between urethane and the photon-donating compound and are second-order up to high conversions (until the almost complete disappearance of the initial urethane). Activation energies and apparent rate constants have been determined for the exchange reactions of phenyl-N-phenylurethane with butyl alcohols. The rates of the exchange reactions in the alcohol medium are compared with those in ortho-dichlorobenzene.     

A thermodynamic study of complexation process between <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-dipyridoxylidene(1,4-butanediamine) and Cd<Superscript>2+</Superscript> in some binary mixed solvents using conductometry

Complexation of the Cd²⁺ ion with N,N′-dipyridoxylidene(1,4-butanediamine) Schiff base was studied in pure solvents including acetonitrile (AN), ethanol (EtOH), methanol (MeOH), tetrahydrofuran (THF), dimethylformamide (DMF), water (H₂O), and various binary solvent mixtures of acetonitrile–ethanol (AN–EtOH), acetonitrile–methanol (AN–MeOH), acetonitrile–tetrahydrofuran (AN–THF), acetonitrile–dimethylformamide (AN–DMF), and acetonitrile–water (AN–H₂O) systems at different temperatures using the conductometric method. The conductance data show that the stoichiometry of complex is 1: 1 [ML] in all solvent systems. A non-linear behavior was observed for changes of log K_f of [Cd(N,N′-dipyridoxylidene(1,4-butanediamine)] complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions. The results show that the thermodynamics of complexation reaction is affected by the nature and composition of the mixed solvents.     

Calculation of the concentration limits of detonation for liquid homogeneous explosive systems

The results of the crush method applied to the experimental determination of the concentration limit of detonation for binary systems based on tetranitromethane and fluoronitromethane are generalized. A universal line (for the class of standard explosives with the atomic composition C _a H _b N _c O _d F _e ) dividing the plane of pairs of dimensionless parameters (heat of explosion, coefficient of oxidizer excess) into regions of detonating solutions and those unable of detonation was found.     

Reactions of arylsulfinyl chlorides and <Emphasis Type="Italic">N</Emphasis>-(arylsulfonyl)arylsulfinimidoyl chlorides with <Emphasis Type="Italic">p</Emphasis>-aminophenols

In reactions of arylsulfinyl chlorides and N-(arylsulfonyl)arylsulfinimidoyl chlorides with p-aminophenols formed N-arylthio-1,4-benzoquinone imines, evidently through a stage of N-arylsulfinyl-4-aminophenols and N-(N-arylsulfonyl)arylsulfinylimidoyl-4-aminophenols that under the reaction conditions eliminate respectively H₂O and ArSO₂NH₂.     

Synthesis and structure of silicon-containing <Emphasis Type="Italic">N</Emphasis>-methyland <Emphasis Type="Italic">N</Emphasis>-benzoylamides of diisopropylphosphoric acid

Diisopropyl N-benzoyl-N-(trimethylsilyl)phosphoramidate reacts with ClCH₂SiMe₂Cl under mild conditions to form diisopropyl N-benzoyl-N-[(chlorodimethylsilyl)methyl]phosphoramidate (III). Diisopropyl N-methyl-N-(trimethylsilyl)phosphoramidate with ClCH₂SiMe₂Cl affords an N-transsilylation product which does not rearrange into diisopropyl N-[(chlorodimethylsilyl)methyl]-N-methylphosphoramidate (XV) even under severe conditions (4 h, 130°C). Compound XV was prepared by the reaction of diisopropyl phosphorochloridate with N-[(methoxydimethylsilyl)methyl]-N-methylamine followed by treatment of diisopropyl N-[(methoxydimethylsilyl)methyl]-N-methylphosphoramidate with boron trichloride. Analysis of experimental and calculated ²⁹Si chemical shifts points to a five-coordinate silicon atom in compound III and a fourcoordinate silicon atom in compound XV. According to B3LYP calculations with due regard to solvent effects, compound III is an isomer with a C=O→Si bond. By variation of substituents at silicon, phosphorus, and carbonyl carbon atoms, chelate structures with either C=O→Si or P=O→Si dative bonds can be obtained.     

Thermodynamic characteristics of complexation between Ho<Superscript>3+</Superscript> and ethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-disuccinic acid in aqueous solutions at 298.15 K

The thermodynamic characteristics of complexation between ethylenediamine-N,N'-disuccinic acid (H₄Y; EDDA) and Ho³⁺ ion were determined calorimetrically and potentiometrically at 298.15 K and ionic strengths of 0.1, 0.5, 1.0, and 1.5 (KNO₃). The logK, Δ_rG, Δ_rH, and Δ_rS values for the formation of HoY^– and HOHY complexes were calculated at the studied and zero ionic strength values. The changes in thermodynamic parameters of the reactions are discussed.     

The role of substituents in a bidentate <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-chelating ligand on the substitution of aqua ligands from mononuclear Pt(II) complexes

The rate of substitution of aqua ligands from three mononuclear platinum(II) complexes, namely [Pt{2-(pyrazol-1-ylmethyl)pyridine}(H₂O)₂](ClO₄)₂, [Pt(H ₂ Py)]; [Pt{2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine}(H₂O)₂](ClO₄)₂, [Pt(dCH ₃ Py)] and [Pt{2-[(3,5-bis(trifluoromethyl)pyrazoly-1-ylmethyl]pyridine}(H₂O)₂](ClO₄)₂, [Pt(dCF ₃ Py)] by thiourea, N,N-dimethylthiourea and N,N,N′,N′-tetramethylthiourea, was studied in aqueous perchloric acid medium of constant ionic strength. The substitution reactions were investigated under pseudo-first-order conditions as a function of nucleophile concentration and temperature using UV/Visible and stopped-flow spectrophotometries. The observed pseudo-first-order rate constants, \( k_{{{\text{obs }}\left( {1/2} \right)}} \), for the stepwise substitution of the first and second aqua ligands obeyed the rate law: \( k_{{{\text{obs}}\left( {1/2} \right)}} = k_{{2 \left( { 1 {\text{st/2nd}}} \right)}} \left[ {\text{Nu}} \right] \). The first substitution reaction takes place trans to the pyrazole ligand, while the second entering nucleophile is stabilised at the reaction site trans to the pyridine ligand. The rate of substitution of the first aqua ligand from the complexes followed the order: Pt(dCF ₃ Py) > Pt(H ₂ Py) > Pt(dCH ₃ Py), while that of the second was Pt(H ₂ Py) ≈ Pt(dCF ₃ Py) > Pt(dCH ₃ Py). Lower pK _a values were found for the deprotonation of the aqua ligand cis to the pyrazole ring. Density functional theory calculations were performed to support the interpretation of the experimental results.     

The Ethylbenzene/Styrene Preferential Separation with Ionic Liquids in Liquid–Liquid Extraction

The objective of this work was to explore the feasibility of using ionic liquids (ILs), namely N-ethyl-N-methylmorpholinium dicyanamide, [EMMor][DCA], (3-hydroxypropyl)-1-methylmorpholinium dicyanamide, [N-C₃OHMMor][DCA], 1-(3-hydroxypropyl)-3-methylimidazolium dicyanamide, [N-C₃OHMIM][DCA], 1-(3-hydroxypropyl)pyridinium dicyanamide, [N-C₃OHPy][DCA], (3-cyanopropyl)pyridinium dicyanamide, [N-C₃CNPy][DCA], and (3-cyanopropyl)methylpyrrolidinium dicyanamide, [N-C₃CNMPyr][DCA] for the separation of ethylbenzene and styrene. The liquid–liquid equilibrium (LLE) data in ternary systems of {IL (1)?+?styrene (2)?+?ethylbenzene (3)} at T?=?298.15 K and ambient pressure is presented for the six ILs synthesized by us. The final chromatography analysis of the composition of tie-lines has shown that the studied ILs are not found in the raffinate phase and they show interesting results on the selectivity and solute distribution ratio for styrene extraction. A comparison of different ILs is presented for the studied separation problem. It was observed that the best separation selectivities were found for [N-C₃CNPy][DCA] (S_Av?=?2.38) and [N-C₃OHMMor][DCA] (S_Av?=?2.42) in comparison with other studied ILs in this work and those presented in the literature. While the data presented here are useful from a theoretical standpoint, the possibility of applications for these ILs in technological processes is questionable because of low solute distribution ratios, especially those calculated from the masses [N-C₃CNPy][DCA] (β_MAv?=?0.08) and [N-C₃OHMMor][DCA] (β_MAv?=?0.07). The experimental tie-lines were correlated with the non-random two liquid NRTL model.     

Molecular complexes of 4-nitropyridine and 4-nitroquinoline <Emphasis Type="Italic">N</Emphasis>-oxides with boron trifluoride and hydrogen chloride as intermediates in S<Subscript>N</Subscript>Ar reactions

Complexation of 4-nitropyridine N-oxides with ν- (BF₃, HCl) and π-acceptors (tetracyanoethylene, chloranil, 2,3-dichloro-5,6-dicyano-1,4-benzoquinone, 7,7,8,8-tetracyanoquinodimethane) activates the nitro group to nucleophilic replacement by chlorine. Adducts formed by 4-nitropyridine and 4-nitroquinoline N-oxides with boron trifluoride and hydrogen chloride were studied by IR spectroscopy. It was shown that these complexes belong to the n,ν type and that the donor-acceptor interaction therein involves the oxygen atom of the N-oxide group.     

Physicochemical and excess properties of binary mixtures of (1-alkyl-3-methylimidazoliumchloride/bromide + ethylene glycol) at <Emphasis Type="Italic">T</Emphasis> = (288.15 to 333.15) K

In the present work, the density, ρ, refractive index, n_D, and dynamic viscosity, η, for four binary solutions containing ionic liquids [C_nmim]X (C_nmim = 1-alkyl-3-methylimidazolium; n = 6, 8; X = Cl, Br) and ethylene glycol (EG) were investigated at temperatures of 288.15–333.15 K and at ambient pressure. In addition, the excess molar volume, V_m^E, was calculated and correlated using the Redlich-Kister polynomial equation. The temperature effect on the density of the binary systems studied was expressed by a linear two-parameter equation. The variation in density, refractive index, and viscosity with the composition was described by polynomial equations. The influence of carbon chain-length and the anion of the ionic liquids, and the influence of the temperature on the physicochemical properties of the binary systems can be explained by comparison of the experimental results.     

Analysis of Novel Antioxidant Sesquarterpenes (C<Subscript>35</Subscript> Terpenes) Produced in Recombinant <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis>

Novel synthetic isoprenoids have been synthesized in engineered microbial hosts by evolving terpene synthase or expressing heterologous terpene synthases. Recently, the native operon, crtN_aN_cM derived from Planococcus sp. PAMC 21323, has isolated for potential industrial applications of C₃₅ carotenoids. For the first time, novel C₃₅ carotenoids (sesquarterpene) were synthesized in Corynebacterium glutamicum expressing the crtN_aN_cM genes. The recombinant strains accumulate various sesquarterpene including 4-apolycopene (red color), 4-aponeurosporene (yellow color), and no pigmentation, depending on the expression of the genetic elements of the crtN_aN_cM genes. Subsequently, the carotenoid extract from the cells harboring pCES-H36-CrtN_aN_cM was analyzed, resulting in significantly higher antioxidant activity than those of other strains harboring pCES-H36-CrtN_cM and pCES-H36-CrtN_aN_c, respectively. This study will promote further engineering of C. glutamicum to increase sesquarterpene productions.     

Copolymers of <Emphasis Type="Italic">N</Emphasis>-vinylcaprolactam with 1-vinyl- and 1-methacryloyl-3,5-dimethylpyrazole as sorbents of essential α-amino acids in liquid- and solid-phase extraction

Radical copolymerization of N-vinylcaprolactam with 1-vinyl- and 1-methacryloyl-3,5-dimethylpyrazole was performed with the aim of development of effective extraction systems based on nontoxic copolymers for the recovery of essential amino acids histidine, threonine, and tryptophan from aqueous media. Water-soluble and water-insoluble products were obtained. As follows from the copolymerization data, N-vinylcaprolactam exhibits relatively high activity, and the copolymerization constants r₁ and r₂ for both pairs of comonomers are lower than unity. The influence of the composition and structure of copolymers on the quantitative characteristics (degree of recovery R and distribution coefficient D) of liquid- and solid-phase extraction was studied. The probable mechanism of the interaction of the polymers with α-amino acids was considered. The synthesized copolymers show high performance in recovery of α-amino acids from aqueous media.     

Reaction of transsilylation of <Emphasis Type="Italic">N</Emphasis>-methyl-<Emphasis Type="Italic">N</Emphasis>-trimethylsilylacetamide with silanes ClCH<Subscript>2</Subscript>SiR<Superscript>1</Superscript>R<Superscript>2</Superscript>Cl

The reaction of N-methyl-N-trimethylsilylacetamide with silanes ClCH₂SiR¹R²Cl (R¹, R² = H, Me; H, Ph; Ph₂) leads to the formation of (O→Si) chelate compounds with pentacoordinate silicon: N-[chloro(methyl)-silyl]methyl-, N-[chloro(phenyl)silyl]methyl-, and N-[chloro(diphenyl)silyl]methyl-N-methylacetamides. From the data of multinuclear NMR spectroscopy, the intermediates of the reaction of N-methyl-N-trimethylsilylacetamide with ClCH₂SiPhHCl and ClCH₂SiPh²Cl are stable in CDCl₃ solution at room temperature during several days and slowly rearrange to the final (O–Si) chelate compounds.     

Measurement and Modeling the Excess Molar Volumes and Refractive Index Deviations of Binary Mixtures of 2-Propanol, 2-Butanol and 2-Pentanol with <Emphasis Type="Italic">N</Emphasis>-Propylamine

The densities, ρ, and refractive indices, n _D, of 2-alkanols (C₃–C₅) with N-propylamine have been measured for the whole range of composition at temperatures from (298.15–328.15) K at 10 K intervals and ambient pressure of 81.5 kPa, using an Anton Paar DMA 4500 oscillating tube densimeter and an Anton Paar Abbemat 500 automatic refractometer. From the experimental data, excess molar volumes \( V_{\text{m}}^{\text{E}} \) partial molar volumes \( \bar{V}_{i} \) apparent molar volumes V _?i and refractive index deviations Δn _D the binary systems consisting of N-propylamine + 2-alkanols (2-propanol, 2-butanol, 2-pentanol) were calculated and \( V_{\text{m}}^{\text{E}} \) and Δn _D values were correlated with the Redlich–Kister polynomial. The effect of temperature and the chain length of the alcohol on the excess molar volumes and refractive index deviations are discussed in terms of molecular interaction between unlike molecules. The excess molar volumes are negative and refractive index deviations are positive over the entire composition range, which indicates strong hydrogen bonding between molecules of the mixtures. A comparative study has been made of the refractive indices obtained experimentally and those calculated by means of the Lorentz–Lorenz, Weiner and Arago–Biot relations. The perturbed chain statistical associating fluid theory (PC-SAFT), simplified PC-SAFT and Prigogine–Flory–Patterson theory were also applied to correlate and predict the density and excess molar volumes of the mixtures.     

Solutions of mixtures of cellulose and synthetic polymers in <Emphasis Type="Italic">N</Emphasis>-methylmorpholine-<Emphasis Type="Italic">N</Emphasis>-oxide

Phase state and morphological features of solutions of cellulose blends with rigid-chain thermotropic LC copolyesters and isotropic poly(m-phenyleneisophthalamide) in the highly polar donor solvent N-methylmorpholine-N-oxide are studied by DSC and polarization microscopy. The ternary phase diagram for the cellulose-copolyesters-N-methylmorpholine-N-oxide system is constructed. Rheological characteristics of the prepared solutions are studied using capillary and rotary rheometers under the regimes of continuous and periodic shear deformation. Rheological characteristics of cellulose solutions with copolyesters in N-methylmorpholine-N-oxide with their different phase states are shown to change in accordance with the traditional mechanism of flow for solutions with high specific interactions between their components. However, the character of the rheological behavior of mixtures of cellulose with poly(m-phenyleneisophthalamide) in N-methylmorpholine-N-oxide primarily stems from structural-morphological transformations in solutions taking place upon deformation.     

Stability of <Emphasis Type="Italic">s</Emphasis>-, <Emphasis Type="Italic">p</Emphasis>-, and <Emphasis Type="Italic">d</Emphasis>-element diphosphates in water

The mean atomic Gibbs energies of formation of (Δ _f ? _at ⁰ ) of s-, p-, and d-element diphosphates have been calculated using ion increments of the Gibbs energy (Δ _f G ⁰). The diphosphate hydrolysis kinetics is considered, and a correlation between the Δ _f ? _at ⁰ values and the hydrolysis rate constants is presented.     

Enthalpy characteristics of the dissolution of L-valine in water/formamide mixtures at 298.15 K

The thermochemical dissolution of L-valine in solvent mixtures H₂O + (formamide, N-methylformamide, and N,N-dimethylformamide) is studied at an organic component concentration of x₂ = 0–0.35 molar fractions and a temperature of 298.15 K. The experimental data are used to calculate standard enthalpies of dissolution, the transferring of L-valine from water to a mixed solvent, and the enthalpy coefficients of pairwise interactions (h_xy) with organic solvent molecules. The correlation between the enthalpy characteristics of the dissolution of L-valine with the composition of aqueous organic mixtures and the nature of the organic solvent (its physicochemical properties) is determined. A comparative analysis of the values of h_xy of a number of aliphatic L-amino acids in similar solvent mixtures with the hydrophobicity parameters of their side chains is performed.     

Volumetric,Viscometric and Speed of Sound Studies of Binary Mixtures of <Emphasis Type="Italic">Tert</Emphasis>-butyl Acetate with Fluorobenzene,Chlorobenzene and Bromobenzene at (298.15 and 308.15) K and at Atmospheric Pressure 0.087 MPa

Volumetric, viscometric and speed of sound studies of binary mixtures of tert-butyl acetate with fluorobenzene, chlorobenzene and bromobenzene have been made over the entire range of composition, at (298.15 and 308.15) K and at atmospheric pressure (p?=?0.089 MPa). From the experimental values of density, viscosity, and speed of sound, the excess molar volumes V^E, deviations in viscosity ?η and deviation in isentropic compressibility ΔK _S have been calculated. The V^E and ΔK _S values are negative while the ?η the values are positive over the entire composition range for the binary mixtures. The derived parameters have been fitted with the Redlich–Kister polynomial equation. The interaction parameters of McAllister model are used to correlate the experimental values of density, viscosity and speed of sound.