Trimerization of 4‐Amino‐3,5‐dinitropyrazole: Formation,Preparation, and Characterization of 4‐Diazo‐3,5‐bis(4‐amino‐3,5‐dinitropyrazol‐1‐yl) pyrazole (LLM‐226)

4‐Amino‐3,5‐dinitropyrazole (LLM‐116, 1 ) undergoes trimerization to 4‐diazo‐3,5‐bis(4‐amino‐3,5‐dinitropyrazol‐1‐yl) pyrazole (LLM‐226) upon heating. A mechanism is proposed and discussed. LLM‐226 is a new diazo‐based energetic material, thermally stable, and insensitive to impact, friction, and spark. The material may be prepared by heating 1 and 4‐diazo‐3,5‐dinitropyrazole ( 2 ) in a mixture of toluene and butyl acetate at 110°C or heating 1 alone in dichlorobenzene at 160°C. The characterization of LLM‐226 including X‐ray crystallographic analysis and small‐scale safety properties will be discussed.     

Four Syntheses of 4‐Amino‐3,5‐dinitropyrazole

In this paper, syntheses of 4‐amino‐3,5‐dinitropyrazole from four different starting materials are described. The starting materials were 4‐nitropyrazole, 4‐nitro‐3,5‐dimethylpyrazole, 3,5‐dinitropyrazole, and 4‐chloropyrazole, respectively. They are compared in terms of yield, number of steps and suitability for scale‐up into pilot scale production. The overall yield, calculated from commercially available starting materials, ranged from 21% in the case of synthesis via 3,5‐dinitropyrazole up to 61% for the one starting from 4‐chloropyrazole. With numerous factors taken into account, the latter was chosen for a pilot scale study and the product could be produced in batches of 200 g.     

A novel three‐dimensional CdII coordination polymer: poly[[aquabis(2,2′‐bipyridine)(μ5‐pyrazol‐1‐ide‐3,5‐dicarboxylato)(μ4‐pyrazol‐1‐ide‐3,5‐dicarboxylato)(μ3‐pyrazole‐3,5‐dicarboxylato)tetracadmium(II)] dihydrate]

The title compound, {[Cd₄(C₅H₂N₂O₄)(C₅HN₂O₄)₂(C₁₀H₈N₂)₂(H₂O)]·2H₂O}_n, crystallized in the monoclinic space group P2₁/n and displays a three‐dimensional architecture. The asymmetric unit is composed of four crystallographically independent Cd^II centres, two triply deprotonated pyrazole‐3,5‐dicarboxylic acid molecules, one doubly deprotonated pyrazole‐3,5‐dicarboxylic acid molecule, two 2,2′‐bipyridine ligands, one coordinated water molecule and two interstitial water molecules. Interestingly, the Cd^II centers exhibit two different coordination numbers. Two Cd^II centres adopt a distorted octahedral arrangement and a third a trigonal–prismatic geometry, though they are all hexacoordinated. However, the fourth Cd^II center is heptacoordinated and displays a pentagonal–bipyramidal geometry. The three anionic ligands adopt μ₃‐, μ₄‐ and μ₅‐bridging modes, first linking Cd^II centers into a one‐dimensional wave‐like band, then into a wave‐like layer and finally into a three‐dimensional coordination framework, which is stabilized by hydrogen bonds.     

4‐(3,5‐Dimethyl‐1H‐pyrazol‐4‐ylmethyl)‐3,5‐dimethyl‐1H‐pyrazol‐2‐ium dihydrogen phosphate: a combined X‐ray and DFT study

The molecular structure of the title salt, C₁₁H₁₇N₄⁺·H₂PO₄⁻, has been determined from single‐crystal X‐ray analysis and compared with the structure calculated by density functional theory (DFT) at the BLYP level. The crystal packing in the title compound is stabilized primarily by intermolecular N—H...O, O—H...N and O—H...O hydrogen bonds and π–π stacking interactions, and thus a three‐dimensional supramolecular honeycomb network consisting of R₄²(10), R₄⁴(14) and R₄⁴(24) ring motifs is established. The HOMO–LUMO energy gap (1.338 eV; HOMO is the highest occupied molecular orbital and LUMO is the lowest unoccupied molecular orbital) indicates a high chemical reactivity for the title compound.     

3,5‐Di­fluoro‐4‐nitro­pyridine N‐oxide and 3,5‐di­amino‐4‐nitro­pyridine N‐oxide monohydrate

The mol­ecule of 3,5‐di­fluoro‐4‐nitro­pyridine N‐oxide, C₅H₂F₂N₂O₃, is twisted around the C—NO₂ bond by 38.5 (1)°, while the 3,5‐di­amino analogue, 3,5‐di­amino‐4‐nitro­pyridine N‐oxide monohydrate, C₅H₆N₄O₃·H₂O, adopts a planar conformation stabilized by intramolecular hydrogen bonds, with a significant redistribution of π electrons.     

3,5‐Bis(4‐methoxy­benzyl­idene)‐1‐methyl‐4‐piperidone and 3,5‐bis(4‐methoxy­benzyl­idene)‐1‐methyl‐4‐oxopiperidinium chloride: potential biophotonic materials

In the title compound 3,5‐bis(4‐methoxy­benzyl­idene)‐1‐methyl‐4‐piperidone, C₂₂H₂₃NO₃, (I), the central heterocyclic ring adopts a flattened boat conformation, while in the related salt 3,5‐bis(4‐methoxy­benzyl­idene)‐1‐methyl‐4‐oxopiperidin­ium chloride, C₂₂H₂₄NO₃⁺·Cl⁻, (II), the ring exhibits a `sofa' conformation in which the N atom deviates from the planar fragment. The pendant benzene rings are twisted from the heterocyclic ring planes in both mol­ecules in the same direction, the range of dihedral angles between the ring planes being 24.5 (2)–32.7 (2)°. The dominant packing motif in (I) involves centrosymmetric dimers bound by weak intermolecular C—H⋯O hydrogen bonds. In (II), cations and anions are linked by strong N—H⋯Cl hydrogen bonds, while weak C—H⋯O and C—H⋯Cl hydrogen bonds link the cations and anions into a three‐dimensional framework.     

Two N‐substituted 3,5‐diphenyl‐2‐pyrazoline‐1‐thiocarboxamides

The structures of N‐ethyl‐3‐(4‐fluoro­phen­yl)‐5‐(4‐methoxy­phen­yl)‐2‐pyrazoline‐1‐thio­carboxamide, C₁₉H₂₀FN₃OS, (I), and 3‐(4‐fluoro­phen­yl)‐N‐methyl‐5‐(4‐methyl­phen­yl)‐2‐pyrazoline‐1‐thio­carboxamide, C₁₈H₁₈FN₃S, (II), have similar geometric parameters. The meth­oxy/methyl‐substituted phenyl groups are almost perpendicular to the pyrazoline (pyraz) ring [inter­planar angles of 89.29 (8) and 80.39 (10)° for (I) and (II), respectively], which is coplanar with the fluoro­phenyl ring [inter­planar angles of 5.72 (9) and 10.48 (10)°]. The pyrazoline ring approximates an envelope conformation in both structures, with the two‐coordinate N atom involved in an intra­molecular N—H⋯N_pyraz inter­action. In (I), N—H⋯O and C—H⋯S inter­molecular hydrogen bonds are the primary inter­actions, whereas in (II), there are no intermolecular hydrogen bonds.     

New Homoleptic Rare Earth 3,5‐Diphenylpyrazolates and 3,5‐Di‐tert‐butylpyrazolates and a Noteworthy Structural Discontinuity

Direct thermally induced reactions between rare earth metals (Ln = Y,Ce, Dy, Ho, and Er) activated by Hg metal and 3,5‐diphenylpyrazole (Ph₂pzH) or 3,5‐di‐tert‐butylpyrazole (tBu₂pzH) yielded either homoleptic complexes [Ln_n(R₂pz)_3n] or a heteroleptic complex [Ln(Ph₂pz)₃(Ph₂pzH)₂] From Ph₂pzH, [Ce₃(Ph₂pz)₉], [Dy₂(Ph₂pz)₆], [Ho₂(Ph₂pz)₆], and [Y(Ph₂pz)₃(Ph₂pzH)₂] were isolated. The first has a bowed trinuclear Ce₃ backbone with two η² pyrazolate ligands on the terminal metal atoms and one on the middle, and bridging by both μ‐η²:η² and μ‐η²:η⁵ ligands between the terminal and the central Ce atoms. Although both the Dy and Ho complexes are dinuclear, the former has the rare μ‐η²:η¹ bridging whilst the latter has μ‐η²:η² bridging. Thus the dysprosium complex is seven‐coordinate and the holmium is eight‐coordinate, in contrast to any correlation with Ln³⁺ ionic radii, and the series has a remarkable structural discontinuity. The heteroleptic Y complex is eight coordinate with three chelating Ph₂pz and two transoid unidentate Ph₂pzH ligands. From tBu₂pzH, dimeric [Ln₂(tBu₂pz)₄] (Ln = Ce, Er) were isolated and are isomorphous with eight coordinate Ln atoms ligated by two chelating terminal tBu₂pz and two μ‐η²:η² tBu₂pz donor groups. They are also isomorphous with previously reported La, Nd, Yb, and Lu complexes.     

From small structural modifications to adjustment of structurally dependent properties: 1‐methyl‐3,5‐bis[(E)‐2‐thienylidene]‐4‐piperidone and 3,5‐bis[(E)‐5‐bromo‐2‐thienylidene]‐1‐methyl‐4‐piperidone

The molecules of the title compounds, C₁₆H₁₅NOS₂, (I), and C₁₆H₁₃Br₂NOS₂, (II), are E,E‐isomers and consist of an extensive conjugated system, which determines their molecular geometries. Compound (I) crystallizes in the monoclinic space group P2₁/c. It has one thiophene ring disordered over two positions, with a minor component contribution of 0.100 (3). Compound (II) crystallizes in the noncentrosymmetric orthorhombic space group Pca2₁ with two independent molecules in the unit cell. These molecules are related by a noncrystallographic pseudo‐inversion center and possess very similar geometries. The crystal packings of (I) and (II) have a topologically common structural motif, viz. stacks along the b axis, in which the molecules are bound by weak C—H...O hydrogen bonds. The noncentrosymmetric packing of (II) is governed by attractive intermolecular Br...Br and Br...N interactions, which are also responsible for the very high density of (II) (1.861 Mg m⁻³).     

4‐Phenyl‐3,5‐bis(2‐pyridyl)‐4H‐1,2,4‐triazole

In the title compound, C₁₈H₁₃N₅, the two pyridyl rings form dihedral angles of 32.7 (2) and 30.1 (2)° with the triazole ring. The most favoured orientation of the pyridyl rings is that with their N atoms on opposite sides of the triazole ring directed towards the phenyl ring. π–π‐Stacking interactions involving pyridyl rings are observed along the a axis at a perpendicular distance of 3.670 (3) Å. This arrangement is further stabilized by weak intermolecular C—H?N hydrogen bonds.     

Synthesis and Characterization of 3,5‐Diamino‐1,2,4‐triazolium Dinitramide

3,5‐Diamino‐1,2,4‐triazole ( 1 , guanozol) was protonated with diluted hydrochloric acid, nitric acid, as well as perchloric acid forming 3,5‐diamino‐1,2,4‐triazolium chloride hemihydrate ( 2 ), 3,5‐diamino‐1,2,4‐triazolium nitrate ( 3 ) and 3,5‐diamino‐1,2,4‐triazolium perchlorate ( 4 ), respectively. In a second step 4 reacted with potassium dinitramide forming 3,5‐diamino‐1,2,4‐triazolium dinitramide ( 5 ) and low soluble potassium perchlorate. Compounds 2 – 5 were characterized by low temperature single X‐ray diffraction, IR and Raman as well as multinuclear NMR spectroscopy, mass spectrometry and differential scanning calorimetry. The heats of formation of 1 – 5 were calculated by the CBS‐4M method to be 81.1 ( 1 ), 124.7 ( 2 ), –76.1 ( 3 ), –25.2 ( 4 ) and 138.7 ( 5 ) kJ·mol^–1. With these values as well as the X‐ray densities several detonation parameters were calculated using both computer codes EXPLO5.03 and EXPLO5.04. In addition, the sensitivities of 1 – 5 were determined by the BAM drophammer and friction tester as well as a small scale electrical discharge device.     

Ethyl 3,5‐dimethyl‐4‐phenyl‐1H‐pyrrole‐2‐carboxylate

In the title compound, C₁₅H₁₇NO₂, the ethoxy­carbonyl group is anti with respect to the pyrrole N atom. The angle between the planes of the phenyl and pyrrole rings is 48.26 (9)°. The mol­ecules are joined into dimeric units by a strong hydrogen bonds between pyrrole N—H groups and carbonyl O atoms. The geometry of the isolated mol­ecule was studied by ab initio quantum mechanical calculations, employing both molecular orbital Hartree–Fock (MO–HF) and density functional theory (DFT) methods. The minimum energy was achieved for a conformation where the angle between the planes of the phenyl and pyrrole rings is larger, and that between the ethoxy­carbonyl and pyrrole planes is smaller than in the solid‐state mol­ecule.     

3,5‐Bis­[4‐(diethyl­amino)­benzyl­idene]‐1‐methyl‐4‐piperidone and 3,5‐bis[4‐(diethyl­amino)­cinnamyl­idene]‐1‐methyl‐4‐piperidone: prospective biophotonic materials

The structures of 3,5‐bis­[4‐(diethyl­amino)­benzyl­idene]‐1‐methyl‐4‐piperidone, C₂₈H₃₇N₃O, (I), and 3,5‐bis­[4‐(diethyl­amino)­cinnamyl­idene]‐1‐methyl‐4‐piperidone, C₃₂H₄₁N₃O, (II), have been characterized. Because of conjugation between donor and acceptor parts, the central heterocycles (including the carbonyl group) in (I) and (II) are flattened and exhibit a `sofa' conformation, with a deviation of the N atom from the planar fragment. The dihedral angles between the planar part of the heterocycle and the two almost flat fragments that include a phenyl ring and bridging atoms are 23.2 (1) and 11.2 (1)° in (I), and 11.8 (1) and 8.7 (2)° in (II). One‐ and two‐photon absorption of light and the fluorescence of (I) and (II) have also been characterized.     

3,5‐Bis{3‐[4‐(dimethylamino)phenyl]prop‐2‐enylidene}‐1‐methyl‐4‐piperidone and 3,5‐bis[3‐(4‐methoxyphenyl)prop‐2‐enylidene]‐1‐methyl‐4‐piperidone: potential biophotonic materials

The structures of the title compounds, C₂₈H₃₃N₃O, (I), and C₂₆H₂₇NO₃, (II), together with their two‐photon absorption properties and fluorescence activities are reported. Molecules of (II) reside on crystallographic mirror planes containing the piperidone C=O group and N‐methyl H atoms. Because of the conjugation between the donor and acceptor parts, the central heterocycle in both (I) and (II) exhibits a flattened boat conformation, with deviations of the N atom and the opposite C atom from the planar fragment. The dihedral angles between the coplanar heterocyclic atoms and terminal C₆ rings are less than 20° in both (I) and (II). In (I), the N‐methyl group of the ring occupies an equatorial position, but in (II) it is positioned in an axial site. In the crystal structure of (I), weak intermolecular C—H...π(arene) and C—H...O steric contacts link the molecules along the a axis. In the crystal structure of (II), molecules form stacks along the b axis.     

Secondary interactions in 1‐iodo‐3‐nitrobenzene and 1‐iodo‐3,5‐dinitrobenzene

The crystal packing of 1‐iodo‐3‐nitro­benzene, C₆H₄INO₂, is formed by planar mol­ecules which are linked by I⋯I and NO₂⋯NO₂ interactions. In the case of 1‐iodo‐3,5‐di­nitro­benzene, C₆H₃IN₂O₄, the NO₂ groups are not exactly coplanar with the benzene ring and the mol­ecules form sheets linked by NO₂⋯NO₂ interactions. In contrast with 4‐iodo­nitro­benzene, the crystal structures of both title compounds do not form highly symmetrical I⋯NO₂ intermolecular interactions.     

Synthesis and characterization of novel fluorinated aromatic polyimides derived from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel fluorinated aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FMA), was synthesized by the coupling reaction of 3′,5′‐ditrifluoromethyl‐2,2,2‐trifluoroacetophenone with 2,6‐dimethylaniline under the catalysis of 2,6‐dimethylaniline hydrochloride. A series of fluorinated aromatic polyimides were synthesized from 9FMA and various aromatic dianhydrides, including pyromellitic dianhydride, 3,3′4,4′‐biphenyl tetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature, one‐stage imidization process. The inherent viscosities of the polyimides ranged from 0.37 to 0.74 dL/g. All the polyimides were quickly soluble in many low‐boiling‐point organic solvents such as tetrahydrofuran, chloroform, and acetone as well as some polar organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, and N,N′‐dimethylformamide. Freestanding fluorinated polyimide films could be prepared and exhibited good thermal stability with glass‐transition temperatures of 298–334 °C and outstanding mechanical properties with tensile strengths of 69–102 MPa and elongations at break of 3.3–9.9%. Moreover, the polyimide films possessed low dielectric constants of 2.70–3.09 and low moisture absorption (<0.58%). The films also exhibited good optical transparency with a cutoff wavelength of 303–351 nm. One polyimide (9FMA/BTDA) also exhibited an intrinsic negative photosensitivity, and a fine pattern could be obtained with a resolution of 5 μm after exposure at the i‐line (365‐nm) wavelength. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2665–2674, 2006     

Convenient Synthesis of 3,5‐Biscarbamoyl‐pyridine Derivatives

An efficient and convenient method for synthesis of 3,5‐bis‐carbamoyl‐2,6‐dimethylpyridine derivatives was achieved in good to excellent yields by reaction of anilines with 3,5‐bis(3′,5′‐dimethyl‐1′‐pyrazolyl‐carbonyl)‐2,6‐dimethylpyridine, in which pyrazoles served as leaving groups. The structures of products were confirmed by spectra data and microanalysis.