Application of the integrated ion-current technique to the study of rare-earth chelates

Several substituted acetylacetones have been prepared and reacted with holmium to give tris chelates of the form HoL₃. One of these chelates has been converted to a tetrakis chelate of the form NaHoL₄. The mass spectra of these compounds have been studied and the integrated ion currents at significant m/e values have been related to the amounts of metal chelates evaporated into the ion source of the mass spectrometer. The shape of the integrated ion-current curve is shown to give information about the nature of the evaporation process. When the β-diketone (L) is asymmetrical as in the case of 1,1,1-trifluoro-5,5-dimethylhexan-2,4-dione, the existence of geometrical isomers of the chelate, HoL₃, is reflected in the shape of the integrated ion-current curve, which shows fine structure. The results of mass spectrometric studies are compared with those of the sublimation and gas chromatographic behaviour of the metal chelates.     

Modification of a double focusing mass spectrometer for the observation of metastable ions decaying in two field-free regions

The occurrence of ‘metastable’ ions formed in the ion source as one species decays to a lower mass ion prior to mass analysis provides direct evidence for dissociation mechanisms in organic mass spectra. Both unimolecular and collision-induced decay processes provide useful information on available dissociation pathways, ion structures, and energetics. In double-focusing mass spectrom-eters the existence of two field-free regions presents a convenient vehicle for studying these processes and for obtaining kinetic information on consecutive metastables through simple modification in circuitry and operating conditions. These modifications are described and the method is used to demonstrate consecutive metastable decay processes in acetyl acetone, 1-butene, toluene and alumin-um hexafluoroacetylacetonate. Drift tube pressure studies showed that, within experimental error, consecutive metastables observed in acetyl acetone and 1-butene were collision-induced, while toluene and the aluminum chelate both exhibit two-step unimolecular decays.     

Analysis of polyethylenimine by spectrophotometry of its copper chelate

Polyethylenimine (PEI) forms a copper chelate with a N/Cu ratio of about 5 and with extinction coefficients of about 175 at 6350 A. and 4250 at 2694 A. Solutions of PEI-copper chelate obey Lambert's and Beer's laws and show increased optical density in the presence of chloride ion. Above pH 4.25, hydrogen ion has little effect. A comparison with the copper chelate of polyvinylamine suggests that PEI has a highly, branched structure. Analysis of PEI via its copper chelate is described.     

Chelate ring geometry,and the metal ion selectivity of macrocyclic ligands. Some recent developments

Abstract

The idea (Hancock, 1992) that the dominant architectural feature in controlling metal ion selectivity in both open-chain and macro-cyclic ligands is the size of the chelate ring is pursued further. It is shown that when more than one or two six-membered chelate rings are present in the complex of a nitrogen donor macrocycle, the steric requirements of the six-membered chelate ring of a M-N bond length of 1.6 Å and N-M-N angle of 109.5° become particularly severe, and can only be met by a small tetrahedral metal ion. Thus, the ligand 16-aneN₄ (1,5,9,13-tetraazacyclohexadecane) forms complexes of low stability with all metal ions studied to date, but a conformer of 16-aneN₄ is identified by MM calculation which is predicted to form complexes of high stability with very small tetrahedral metal ions. The question of the M-O bond length and O-M-O angles that will produce minimum strain in chelate rings containing neutral oxygen donor is addressed. The observation (Hay, 1993) that the geometry around an ethereal oxygen coordinated to a metal ion approximates to trigonal planar rather than tetrahedral leads to ideal M-O-C angles of about 126°, which leads to minimum strain energy with much longer M-L lengths in chelate rings containing neutral oxygen donors than neutral nitrogen donors. It is suggested that this fact accounts for the general tendency of crown ethers to form their most stable complexes with potassium out of the alkali metal ions, and also accounts for the very small macrocyclic effect observed in complexes of macrocycles containing mixed nitrogen and oxygen donor groups. The preferred geometry of four-membered chelate rings is discussed, and it is shown that higher coordination numbers of metal ions are associated with four membered chelate rings, and that four membered chelate rings may be used to engineer preference for larger metal ions. Very rigid reinforced chelate rings are discussed, and it is shown that open-chain ligands with reinforced bridges between the donor atoms can display all the thermodynamic and kinetic aspects associated with macrocyclic ligands.     

Retention Behavior of Proteins on Glutamic Acid-Boned Silica Stationary Phase

A glutamic acid-bonded silica (Glu-silica) stationary phase with cation-exchange properties was synthesized using l-glutamic acid as ligand and silica gel as matrix. The effects of solution pH value, salt concentration and metal ion on the retention of proteins were examined. The standard protein mixture was separated with a prepared chromatographic column and an iminodiacetic acid column, and compared. The influence of the binding capacity of an immobilized metal ion on the complexation of metal chelate column was studied. The results indicate that the obtained column displays cation-exchange characteristic and better separation ability for proteins. As fixing metal ion on the Glu-silica column, retention of proteins on the column is a cooperative interaction of metal chelate and cation-exchange. The stationary phase shows the typical metal chelate properties with the increase of the sorption capacity of immobilized metal ion.     

Electrospray ionization collision‐induced dissociation mass spectrometry: a tool to characterize synthetic polyaminocarboxylate ferric chelates used as fertilizers

Fertilizers based on synthetic polyaminocarboxylate ferric chelates have been known since the 1950s to be successful in supplying Fe to plants. In commercial Fe(III)‐chelate fertilizers, a significant part of the water‐soluble Fe‐fraction consists of still uncharacterized Fe byproducts, whose agronomical value is unknown. Although collision‐induced dissociation (CID) tandem mass spectrometry (MS/MS) is a valuable tool for the identification of such compounds, no fragmentation data have been reported for most Fe(III)‐chelate fertilizers. The aim of this study was to characterize the CID‐MS² fragmentation patterns of the major synthetic Fe(III)‐chelates used as Fe‐fertilizers, and subsequently use this technique for the characterization of commercial fertilizers. Quadrupole‐time‐of‐flight (QTOF) and spherical ion trap mass analyzers equipped with an electrospray ionization (ESI) source were used. ESI‐CID‐MS² spectra obtained were richer when using the QTOF device. Specific differences were found among Fe(III)‐chelate fragmentation patterns, even in the case of positional isomers. The analysis of a commercial Fe(III)‐chelate fertilizer by high‐performance liquid chromatography (HPLC) coupled to ESI‐MS(QTOF) revealed two previously unknown, Fe‐containing compounds, that were successfully identified by a comprehensive comparison of the ESI‐CID‐MS²(QTOF) spectra with those of pure chelates. This shows that HPLC/ESI‐CID‐MS²(QTOF), along with the Fe(III)‐chelate fragmentation patterns, could be a highly valuable tool to directly characterize the water‐soluble Fe fraction in Fe(III)‐chelate fertilizers. This could be of great importance in issues related to crop Fe‐fertilization, both from an agricultural and an environmental point of view. Copyright © 2009 John Wiley & Sons, Ltd.     

Study of the structure of chelate fibrous ionites by IR spectroscopy

Structure of fibrous chelate ion exchangers FIBAN X-1 and FIBAN X-2 prepared by a two-step synthesis was studied by IR Fourier spectroscopy. The first step of the ion exchanger preparation consists in the production of an aminated fiber (AF). The process can be carried out in different phases: either vapor, or aqueous. It is found that conditions of the synthesis of AF affect differently the ion exchanger structure. For the ion exchanger FIBAN X-1 it does not a matter in which phase is AF synthesized, and the FIBAN X-1 sorbent has amidoamine structure. The structure of chelate ion exchanger FIBAN X-2 depends on the conditions of the synthesis of AF. When the process is carried out in aqueous medium the FIBAN X-2 has amidoamine structure, while amination in the vapor phase leads to formation of the FIBAN X-2 ion exchanger mainly containing in its structure imidazoline rings.     

4,4'-二(对氨基苯乙炔基)-6,6'-二[N,N-二(乙氧基羰甲基)氨甲基]-2,2'-联吡啶的合成与表征

以4,4'-二硝基-2,2'-联吡啶-6,6'-二亚甲基双三氟乙酸酯作为起始原料, 经水解、 溴化、 酯化和对氨基苯乙炔取代4步反应合成了4,4'-二(对氨基苯乙炔基)-6,6'-二[N,N-二(乙氧基羰甲基)氨甲基]-2,2'-联吡啶. 通过红外光谱、 核磁共振波谱、 高分辨质谱等表征了该化合物的结构. 该化合物经水解后与铕离子形成稀土荧光螯合物, 在紫外光激发下, 发射出具有铕离子特征的荧光光谱.     

Gas-phase reactions of divalent Ni complex ions with acetonitrile: Chelate ring size,inductive, and steric effects

Ni(II) complexes of a series of pentadentate polyamine ligands have been reacted with CH₃CN in the gas phase using a modified quadrupole ion trap mass spectrometer. The ligands have structural features such that upon complexation, chelate ring size, sterics, and inductive effects can be evaluated in the gas phase. Rate and equilibrium constants for CH₃CN addition to the metal complexes show that there is a general decrease in the gas-phase reactivity as the chelate ring size is increased. Density functional theory calculations at the B3LYP/LANL2DZ level of theory have been used to obtain minimum energy structures and Mulliken charges for the complexes. The decreased reactivity observed as the chelate ring size is increased correlates with a decrease in the atomic charge on the metal. A larger chelate ring size enhances ligand flexibility and improves the overlap of the ligand’s donor atoms with the metal center. Adding methyl groups adjacent to or on the nitrogen donor groups of a ligand also decreases the rate and equilibrium constants for the reactions of a given complex with CH₃CN. Analysis of Mulliken charges for these complexes indicates that both inductive and steric effects are responsible for lower complex reactivity. These results suggest that while the gas-phase reactivity of a metal complex with CH₃CN is very dependent on the functional groups directly bound to the metal, in some cases steric effects can conceal the correlation between reactivity and coordination structure.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

非均相聚砜螯合滤膜的制备及其对Cu~(2+)的吸附性能研究

通过探讨共混比例、螯合树脂粒径及铸膜液温度对膜结构的影响 ,确定了最佳制膜工艺 ,用相转换法制备出对Cu2 + 具有大螯合容量的非均相螯合滤膜 .研究了螯合树脂颗粒粒径、盐溶液pH值和盐溶液浓度对膜螯合吸附量的影响 ,发现膜对Cu2 + 的最大吸附量可达 70 0 μg cm2 ,吸附行为满足Freundlich吸附等温式 .对膜进行动态螯合吸附测试表明该膜对Cu2 + 可实现吸附与解吸同步进行     

The proportional relationship between the efficiency of a DC ion source and atom mass

The efficiency of ion extraction from a DC ion source has been found by experiment to bear a close correlation to atomic mass. The factors influencing this efficiency are examined theoretically in terms of the mechanisms of extraction, that is, by gas flow, electric field and bulk diffusion. It is found that while charged material is extracted by the electric field, the transport mechanism to the region influenced by the extraction electrode is dominated by gas flow and is therefore dependent on atomic mass. Close agreement with theory and experiment can be seen.The practical application of this approximately linear dependence of ion yield and mass is demonstrated in the VG 9000 glow discharge mass spectrometer. The simple ratio of matrix ion current to contamination ion current gives a direct quantitative reading of weight-% impurity levels down to ppt levels.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Perchlorate Ion-Selective Electrodes with the Liquid Membranes of the O-Phenanthroline Chelate or its Related Compounds

Abstract

The metal chelates of o-phenanthroline, a, a′-dipyridyl or bathophenanthroline were used as the ion exchanger in the liquid membrane of the perchlorate ion-selective electrode. The electrode with a nitrobenzene membrane containing tris(bathophenanthroline)ferrous perchlorate is the highest sensitive one and gives a linear Nernstian response up to about 1 × 10 ^?5 M perchlorate. The membrane electrode having the ferrous ion-chelate of o-phenanthroline as an ion exchanger shows an excellent selectivity for perchlorate ion over nitrate or iodide Ion. The effects of the chelate concentration in the membrane and the central metal species of the chelate are examined on the electrode performance.     

Copper catalysis of 8-acetoxyquinoline hydrolysis

The hydrolysis of 8-acetoxyquinoline in dilute acid solution has been found to be subject to copper^II catalysis. The catalysed reaction is first order in 8-acetoxyquinoline (as the free base), first order in copper ion, and first order in hydroxide ion. It is proposed that a copper chelate is a reaction intermediate in the hydrolysis.     

Kinetic studies of the on/off reaction of the amino group in the side chain of Cu(II), Ni(II), and Co(II) complexes with 14-membered tetraazamacrocycles

The kinetics of the on/off reaction of the amino group in the side chain of tetraazamacrocyclic Cu2+, Ni2+ and Co2+ complexes has been measured. The rate law k(obs)=k(0)+k(H)[H+]+k(OH)/[H+], the sum of the forward and reverse reaction, gives rise to u-shaped pH dependences from which the three rate constants can be determined. k(H) describes the proton assisted dissociation of the amino group bound to the metal ion and is roughly correlated to the equilibrium constant of the reaction. k(OH) is determined by the protonation constant of the free amino group and the rate constant describing the binding of the amino group to the metal ion. k(0) is composed of the rate constant for the opening of the chelate ring without proton assistance and the rate for the reactivity of the ammonium group in the formation of the chelate ring. Our results show that the rates of the opening and closing of the chelate ring are very little dependent on the nature of the metal ion.     

Chemical ionization mass spectrometry. i-Butane reactant gas modified by ethanolamine or ethylenediamine

1,2-Diaminoethane and 2-aminoethanol-1 were added to the isobutane plasma of a chemical ionization mass spectrometer. The resulting reactant gas mixture did not react with additives containing a single oxygen functional group. Addition reactions were observed with some additives containing multiple oxygen functions. Additives containing nitrogen functions were protonated by the reactant mixture. The relative proportion of protonation to addition depended on the ability of the additive to chelate the reactant ion and on the basicity of the additive. This use of 1,2-diaminoethane and 2-aminoethanol-1 provides a convenient method of varying the reactivity of the plasma in a chemical ionization source.     

Quantitative investigations on moving chelation boundary within a continuous EDTA-based sample sweeping system in capillary electrophoresis

Recently, the EDTA-based sweeping of metal ion that combines chelate formation and in-line sample pre-concentration was advanced. However, the moving chelation boundary (MCB) existing in the sweeping system has not been investigated for the quantitative illumination of the mechanism of metal ion sweeping yet. In this paper, the model of MCB was developed from the EDTA-based sweeping. The theoretical studies were performed for boundary movements and controllable sweeping of metal ion. The theoretical studies show that the sweeping system contains the MCB boundary and chelate boundary, and the difference between the MCB and chelate boundary velocities plays a key role in the stacking efficiency of metal ion. To demonstrate the validity of the theoretical conclusion, the experiments of continuous EDTA-based sweeping were performed with CE and a home-made apparatus of a large tube. The home-made apparatus consisted of a glass tube used for the run of continuous EDTA-based sweeping and two peristaltic pumps used for the supply of solution. The experimental results were in accordance with the theoretical conclusions above. The developed theory holds evident for significance for the mechanism of controllable stacking of metal ions in EDTA-based sweeping system in CE.     

Radical polymerization of metal-coordinated monomers with ligands of pyrrole-containing schiff bases

The copper complexes and the cobalt complex with the ligand of 3-(2-pyrrolylmethyl-enimino)propene-1 (PIP) or p-(2-pyrrolylmethylenimino)styrene (PIS) were synthesized and homopolymerizations and the copolymerization with styrene, acrylonitrile, methyl methacrylate and acrylic acid studied. In the polymerization of chelate monomers, inhibition of radical polymerization by the central metal ion was observed, but the chelate polymer could be obtained only if the initiator was present in higher concentrations in the feed. It is considered that the strength of inhibition depends on the electronic configuration of d-orbitals of the central metal ion. The initiation mechanism of the cupric chelate monomer may be reduction of the metal ion by the redox reaction with a primary radical via the intramolecular electron transfer through the π-conjugated system of the ligand prior to the propagation step. This mechanism was verified by studying the redox reaction of various copper complexes with DPPH. In the system of the copper complex containing PIS and acylic acid the alternating copolymer could be obtained at any mole fraction of monomer mixture in feed.     

Synthesis of chromogenic crown ethers and liquid—liquid extraction of alkaline earth metal ions

New crown ether dyes carrying two pendent anionic side-arms were synthesized for the extraction-spectrophotometry of alkaline earth metal ions. In the extraction of alkaline earth metal ions by these dianionic reagents, size recognition by the crown ether ring was more remarkable than in the case of alkali metal ion extraction by a similar type of monoanionic reagents. Dramatic changes in metal selectivity were observed when the nature of the anionic side-arm was changed while the crown ether skeleton was kept the same. The structure/selectivity relationship is discussed in terms of “chelate” and “intramolecular ion-pair” formation. Typically, when the basicity of the pendent anions was relatively high and a six-membered chelate was structurally possible for the pendent anions and the crown-bound metal, the extraction of calcium was favored by up to a factor of 3000 in the ratio of the Ca/Ba extraction constants for reagents of the diaza-18-crown-6 type. In contrast, the reagents which had pendent anions with only poor coordination ability for metal ions seemed to form complexes of the ion-pair type, and calcium ion was 10⁵ times less extractable than barium ion for the same diaza-18-crown-6-skeleton. Strontium ion seemed to be extracted most effectively when the extracted complex assumed properties intermediate between the chelate and intramolecular ion-pair.