Estimation of thermal contact resistance and thermally induced optical effects in single-coated optical fibers

In this study, a conjugate gradient method based on an inverse algorithm is applied to estimate the unknown time-dependent thermal contact resistance in a single-coated optical fiber, which is subjected to transient thermal loading. While knowing the temperature history at the measuring position, no prior information is needed on the functional form of the unknown contact resistance. The temperature data obtained from the direct problem are used to simulate the temperature measurement. The influence of measurement errors, initial guess values, and measurement locations upon the precision of the estimated results is also investigated. Results show that an excellent estimation on the time-dependent thermal contact resistance, temperature distributions, thermally induced microbending loss, and refractive index changes can be obtained for the case considered in this study.     

Transient thermal loading induced optical effects in tightly jacketed double-coated optical fibers with interlayer thermal contact resistance

This article investigates the transient microbending loss and refractive index changes in a tightly jacketed double-coated optical fiber subjected to thermal loading with stress-dependent interlayer thermal contact resistance. The effects of interlayer thermal resistance on the transient microbending loss and refractive index changes of the optical fiber are analyzed and discussed. Results show that the stress-dependent interlayer thermal contact resistance increases the lateral pressure induced by the transient thermal loading in the tightly jacketed double-coated optical fiber and, thus, the microbending loss. Similarly, the interlayer thermal contact resistance increases the thermal loading induced refractive index changes in the transient state of the loading.     

靶场光学测量中的变焦距光学系统

变焦距光学系统通过调整光学系统参数,改变光学系统的焦距来保证光学系统动态成像的需求。本文从变焦距光学系统的基本原理出发,简单描述了光学补偿与机械补偿变焦光学系统的设计,阐述了常见变焦距光学系统的类型与结构。指出了传统变焦距光学系统存在的问题,结合DSP和步进电机在变焦距光学系统中的最新应用,概述了靶场光测设备的变焦距光学系统的最新动态,分析了电机直传技术在靶场光测设备应用的可行性,意在为新一代数字变焦光学系统提供理论参考。     

基于瞬态光克尔效应的超快光学快门技术

系统介绍了几种基于瞬态光克尔效应的超快光学快门技术,包括传统的光克尔双折射快门技术,瞬态光栅快门技术,以及利用瞬态克尔透镜效应的光学快门技术。这些技术都是在泵浦-探测的实验配置基础上,利用门控光对克尔介质折射率的瞬态调制导致的信号光的相位（偏振态）、传播方向或光束发散角等光学特性的改变实现对信号光的超快时间分辨测量。对比讨论了这些超快快门技术的工作原理和实验配置,结果表明瞬态光束偏折快门技术相比其他快门技术具有无偏振配置要求、无相位匹配条件、超宽带光谱响应范围的特点,在光与物质相互作用的超快动力学研究中具有更为广阔的应用前景。     

马赫-曾德光纤干涉光谱测量系统的设计

光纤干涉光谱仪由于其体积小、分辨率高、抗电磁干扰和耐高温的特点,广泛应用于各种领域的物质检测中。设计了一种使用电动光纤延迟线实现光程差调制的基于Mach-Zehnder光纤干涉仪的光谱测量系统。介绍了系统的构成,推导了基于该系统的光谱计算公式以及分辨率计算公式。搭建了实验平台,对一宽谱光源进行测试,并采集其干涉信号,解调出了相应的光谱图。对结果进行分析,当最大光程差变为0.479 5 cm时,光谱分辨率为2.085 4 cm-1。电动光纤延迟线的性能在很大程度上决定了最终解调出的光谱的分辨率、精度,尤其是速度和延时时间的精度和线性度。     

靶场光学测量中的变焦距光学系统

变焦距光学系统通过调整光学系统参数,改变光学系统的焦距来保证光学系统动态成像的需求。本文从变焦距光学系统的基本原理出发,简单描述了光学补偿与机械补偿变焦光学系统的设计,阐述了常见变焦距光学系统的类型与结构。指出了传统变焦距光学系统存在的问题,结合DSP和步进电机在变焦距光学系统中的最新应用,概述了靶场光测设备的变焦距光学系统的最新动态,分析了电机直传技术在靶场光测设备应用的可行性,意在为新一代数字变焦光学系统提供理论参考。     

Direct observation of optical excitation transfer based on resonant optical near-field interaction

This article reports the direct observation of long-distance optical excitation transfer based on resonant optical near-field interactions in randomly distributed quantum dots (QDs). We fabricated optical excitation transfer paths based on randomly distributed QDs by using CdSe/ZnS core?Cshell QDs and succeeded for the first time in obtaining output signals resulting from a unidirectional optical excitation transfer length of 2.4???m. Furthermore, we demonstrate that the optical excitation transfer occurs via the resonant excited levels of the QDs with a comparative experiment using non-resonant QDs. This excitation-transfer mechanism allows for intersecting, non-interacting nano-optical wires.     

Modulated optical vortices

Single-beam optical gradient force traps created by focusing helical modes of light are known as optical vortices. Modulating the helical pitch of such a mode's wave front yields a new class of optical traps whose dynamically reconfigurable intensity distributions provide new opportunities for controlling motion in mesoscopic systems. An implementation of modulated optical vortices based on the dynamic holographic optical tweezer technique is described.     

远场光钳与近场光钳的发展

以经典光学为基础的光钳技术(又称"光镊")在生物、物理和化学等领域得到了广泛的发展和应用,但是该技术受到高倍显微物镜的尺寸和光学衍射极限等多种因素的制约,从而限制了其进一步发展。而远场光纤光钳和近场光钳技术,从不同方面克服了传统光钳的局限。回顾了传统光钳、远场光纤光钳和近场光钳的发展,着重讨论了各种方法的工作原理、实验方法和技术性能,对这几种光钳技术进行了深入地总结和细致地比较。     

基于混合光模式阵列的自由空间编码通信

光学涡旋的产生、传输与应用是当前光学领域的研究热点之一.光学涡旋具有轨道角动量,作为一种全新的自由度,丰富了目前光通信的方式.利用面向目标的共轭对称延拓傅里叶计算全息技术,基于空间光调制器,用单束激光直接产生混合光模式阵列进行编码通信.采用由单光涡和复合光涡构成的4种易于识别的模式组成2×2混合光模式阵列,进行灰度图像的编码传输.在接收端提取混合光模式阵列图的信息并进行解码,实现零误码的灰度图像再现.以传输一幅Lena图像为例,使用2×2混合光模式阵列进行编码通信,相对于传统单光涡编码通信,其信息容量可增加4倍.该方法光路简单易行,可扩展性强,进一步拓展使用4×4混合光模式阵列进行编码通信,信息容量提升16倍.提出的混合光模式阵列编码通信方法对于提高信息传输容量具有重要价值.     

An optical method for wavelength fine-selection in optical spectrum analysers

This letter describes a novel optical method for wavelength fine-selection in the optical spectrum analysers(OSAs) for dense wavelength division multiplexing (DWDM) applications. The proposed new method employs a 'refractive optical lever'system consisting of a rotating optical wedge prism.A new OSA system based on Littman-type monochromator is proposed and the wavelength selection accuracy and resolution of OSA that has included such an optical lever system have been improved by a factor of 20 to100 depending on the wedge angle and offset orientation angle of the optical wedge prism. This proposed 'refractive optical lever' may also simplify the rotation mechanism of the mirror in the commercially available OSAs.     

A novel scheme of two-dimension time-stacked wavelength-time optical code label for optical packet switching network

A novel scheme of time-stacked optical code label based on optical code division multiple (OCDM) technique for optical packet switching network is proposed, in which two-dimensional wavelength-time OCDM code is used as the optical label. Packet loss rate and system characteristic based on the proposed scheme are studied. Results show that less packet loss rate of proposed scheme can be achieved as compared with that of one-dimension time-stacked optical code label system.     

Low threshold optical bistability with optical pumping

By use of circularly polarized light we have exploited optical pumping within the Zeeman sublevels of the ground state to obtain optical bistability in sodium vapours with low threshold power (around 1 mW) and a wide tuning range (>12 GHz). Experimental results are presented for different conditions of operation and compared to computer calculations, that include propagation effects and inhomogeneous broadening, based on a three-level atomic model that accounts for optical pumping.CEILAP, Buenos Aires, Argentina     

Optically controllable variable fiber optical attenuator integrated in conventional optical fiber

New type of optically controllable variable fiber optical attenuator based on thermo-optical effect in liquid cladding of optical fiber is described. The thermo-optical effect in liquid cladding optical fiber causes refractive index contrast changes in core–cladding interface, what enables to change the propagating optical signal power with temperature. The temperature change is achieved by fiber based heating element using laser radiation. Attenuation up to −12 dB was achieved in static dependence and dynamic response confirmed rise time up to 24 ms.     

膜层厚度对金属薄膜光学常数的影响

从麦克斯韦方程出发,可以得到超薄金属膜层光学常数n、k与其厚度有关系的理论依据。采用电阻热蒸发和电子束热蒸发的方法在K9玻璃基底上分别沉积了不同厚度的Cu膜、Cr膜、Ag膜,由椭偏法检测、Drude模型拟合,获得了不同厚度Cu膜、Cr膜、Ag膜光学常数n、k随波长λ的变化规律。超薄金属薄膜与块状金属的光学常数相差较大,随着薄膜厚度的增加,n、k值趋近于块状金属。通过对样品膜层吸收、色散特性的分析,发现连续金属薄膜在可见光波段对长波的吸收较大,而且相比于介质薄膜平均色散率高10mn～102nm量级。     

光分组交换网络中多组光正交码组合光标签识别处理及实验

报道了光分组交换网络中基于多组光正交码组合光标签的识别与接收实验,光标签采用了码长为19,码重为3的2组光正交码组合光标签方案.给出了基于多组光正交码光标签的光分组交换网络(MOOC-OPS)基本原理,通过分析指出在MOOC-OPS网络中处理多组在时域上非连续、随机、突发光标签是现实MOOC-OPS关键技术之一.设计出了基于展宽网络和放大器级联方式接收多组低功率窄脉冲(MOOC-OPS网络的光标签)的实验方案,完成了实验电路板制作与实验验证.实验结果表明成功地实现了MOOC-OPS网络中周期为2ns基于多组光正交码光标签脉冲的识别接收,验证了该方案的可行性.     

Digital optical computing

The motivation for a digital optical computer is based on the shortcomings inherent in of electronic computers. Optics has solutions to offer especially in interconnects. Devices based on nonlinear optical effects are still in the early stages of their development. Hence at an intermediate stage hybrid opto-electronic computers might emerge. Their architectures should make use of the special attributes of optics. A specific approach called symbolic substitution logic is outlined.     

基于布里渊散射的分布式光纤传感技术

基于布里渊散射的分布式光纤传感技术是目前国内外研究的热点。其中基于时域定位的布里渊分布式光纤传感技术主要分为布里渊光时域反射和布里渊光时域分析两种。国内对基于布里渊光时域反射技术的分布式光纤传感技术的研究报道比较多。介绍了基于布里渊光时域分析技术的分布式光纤传感技术的研究现状,并对基于时域定位的两种传感技术进行了分析对比。总结了布里渊散射分布式光纤传感技术实用化存在的问题及可能的解决方法,指出了该传感技术进一步的发展方向。     

Temperature compensation techniques for resonantly enhanced sensors and devices based on optical microcoil resonators

It is well known that environmental effects have a major influence on the optical stability of resonantly enhanced sensors and devices based on optical microfiber, namely in the configuration of a microcoil resonator. We propose a geometric design to reduce such effects by chirping the refractive index of successive paired turns in the microcoil resonator. The resistance to external effects such as temperature drifts can be considerably improved by optimizing the coupling coefficients and chirping profile, such that the wavelength span of the resonant condition is maximized without compensating its sensitivity to the desired measurand. We also demonstrate another technique based on resonant wavelength tuning using a compact piezoelectric ceramic disk measuring 3 mm in diameter and 1 mm in thickness, attaining tunability as high as 6.5 pm/100 V.     

光学窗口电磁屏蔽性能分析与验证

为分析不同基底材料光学窗口电磁屏蔽性能，以Kohin的等效薄膜模型为基础，考虑电磁波在材料2个界面中的多次反射和折射，得到电磁波界面反射系数，利用matlab编写程序计算相同网栅、不同厚度、不同材料的屏蔽效率曲线，分析了厚度和材料对光窗屏蔽效率的影响。为验证仿真数据的准确性，在ZnS基底上制作了周期为500 μm、线宽为15 μm，电阻≤20 Ω的测试样片，测试其在8 GHz～18 GHz频段的电磁屏蔽效能。通过对比可看出:测试与理论计算数据较符合，误差约为2 dB～4 dB，计算数据可以预估光学窗口电磁屏蔽性能，为后续的设计工作提供参考。