Determination of new pyridoquinoline derivatives and their quantification in urine by capillary liquid chromatography

Capillary liquid chromatography (CLC) in reversed separation mode was applied to the quantification and impurity profile determination of eight newly synthesized pyridoquinolines. The CLC separation system consisted of Nucleosil C18 stationary phase and methanol containing 1% (v/v) of triethylamine (TEA) as the mobile phase. The optimized separation system enabled the separation of impurities from the main component and their quantification in a reasonable analysis time. The presence of TEA in the mobile phase greatly improved the peak shape and decreased the analysis time of the studied derivatives on the C18 stationary phase. Calibration curves of pyridoquinolines were plotted in a concentration range from 1.0×10^–6 to 1.0×10^–3 mol/L at two parallel detector wavelengths of 254 and 265 nm and subsequently used for quantification of pyridoquinoline derivatives in human urine. No pretreatment of the real biological sample was needed. Detection and quantification limits were calculated for all the derivatives and the detection limits of most of the pyridoquinolines were found to lie in the μmol/L concentration range. The proposed CLC separation system has proved to be a suitable method for quantification of test derivatives in samples containing human urine matrix.     

Capillary liquid chromatography as a tool for separation of hydrophobic basic drugs. Relation between tests for column characterization and real analysis

Two capillary columns for reversed phase (RP) capillary liquid chromatography (CLC), viz. Nucleosil 100‐5 C18 and LiChrosorb RP‐select B, were characterized by the Walters test, i.e. the chromatographic test proposed for RP stationary phases. Hydrophobicity indices were determined not only in acetonitrile/water mobile phase, as proposed in the test, but they were also measured in buffered systems. This approach was used to quantify the influence of mobile phase composition on the modification of the surface of the stationary phases. In the next step, small basic compounds differing in their hydrophobicity and basicity were selected and their retention on the stationary phases in mobile phases of the same composition as used for column testing was examined. Furthermore, the retention of newly synthesized drugs, chemotherapeutics derived from thioacridine and pyridoquinoline, differing in their structures, basicity, and hydrophobicity, was also studied. The composition of the mobile phases had to be shifted to higher contents of organic modifiers – acetonitrile or methanol – in order to elute these hydrophobic compounds from the columns. The question we wanted to answer was: How is the method for testing of reversed phases related to retention, separation efficiency, and peak symmetry of various analytes?     

Polyethylenimine-modified metal oxides for fabrication of packed capillary columns for capillary electrochromatography and capillary liquid chromatography

The need for novel packing materials in both capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) is apparent and the development towards more selective, application-oriented chromatographic phases is under progress world-wide. In this study we have synthesized new polyethyleneimine (PEI) functionalized Mn(2)O(3), SiO(2), SnO(2), and ZrO(2) particles for the fabrication of packed capillary columns for CEC and CLC. The nanocasting approach was successful for the preparation of functionalized metal oxide materials with a controlled porosity and morphology. PEI functionalization was done using ethyleneimine monomers to create particles which are positively charged in aqueous solution below pH 9. This functionalization allowed the possibility to have both hydrophobic (due to its alkyl chain) and ionic interactions (due to positively charged amino groups) with selected compounds. For comparison aminopropyl-functionalized silica was also synthesized and tested. Both slurry pressure and electrokinetic packing procedures used gave similar results, but fast sedimentation of the material caused some problems during the packing. The high stability and wide pH range of PEI-functionalized SiO(2) material, with potential for hydrophobic and electrostatic interactions, proved to be useful for the CEC and CLC separation of some model acidic and neutral compounds.     

Cloud point extraction combined with micellar electrokinetic capillary chromatography determination of benzophenones in cosmetic matrix

A method has been developed for the separation and determination of three hydrophobic benzophenones: 2,4-dihydroxybenzophenone (BP-1), 2,2'4,4'-tetrahydroxybenzophenone (BP-2), and 2-hydroxy-4-methoxybenzophenone (BP-3) in sunscreen by micellar electrokinetic capillary chromatography (MEKC) combined with cloud point extraction (CPE). The analytes were extracted at pH 5.0 by micelles of the nonionic surfactant polyoxyethylene-7.5-octylphenyl ether (Triton X-114). A 150 microL aliquot from the extracted surfactant-rich phase was diluted up to 500 microL with ethanol to reduce its viscosity before separation by MEKC. A background electrolyte of 25 mmol/L sodium tetraborate containing 30 mmol/L sodium dodecyl sulfate at pH 9.25 was used as the separation medium to avoid the adsorption of hydrophobic substances and Triton X-114 onto the inner surface of the separation capillary, ensuring the separation efficiency and reproducibility. Detection is performed at 290 nm. Under the optimized conditions, an enrichment factor of 20 was obtained and the determination limits of BP-1, BP-2, and BP-3 were found to be 3.90 x 10(-) (7), 3.83 x 10(-7), and 6.42 x 10(-8) mol/L, respectively. In comparison with the earlier reported methods, the LODs of this method are superior to the other methods. The presented procedure was successfully applied to the determination of BP-1, BP-2, and BP-3 in sunscreen with satisfactory results.     

Separation and determination of aminophenols and phenylenediamines by liquid chromatography and micellar electrokinetic capillary chromatography

The separation and determination of aminophenols and phenylenediamines were investigated by liquid chromatography (LC) and micellar electrokinetic chromatography (MEKC) in this study. Aminophenols and phenylenediamines are commonly used components in commercial hair colorants. The problem of tailing peaks in LC was improved by the technique of using mobile phase containing 15 mM triethylamine at pH 8.0. The analysis of o-aminophenol was not succeeded with LC even though the modifier of triethylamine was added. But it could be quantitative successfully by MEKC. The optimum separation condition of MEKC was achieved by employing 55 mM cetyltrimethyl ammonium chloride in 50 mM borate buffer (pH 9.2) with electric field strength of −145 V cm⁻¹. Finally, the commercial hair dyes were analyzed by developing methods of LC and MEKC. From both the results, there is no significant difference presence at 99.5% confidence level. These two methods could give the complementary results.     

Method of Determination of 9-(Alkylthio)Acridines in Urine by Capillary Liquid Chromatography

Reversed-phase capillary liquid chromatography was applied for quantification of thioderivatives of acridine. Ten 9-(alkylthio)acridines, three containing and seven lacking amino groups, were analyzed on Nucleosil C₁₈ with acetonitrile-water-triethylamine (90.0:9.0:1.0, v/v/v) mixture as the mobile phase. The presence of triethylamine in the eluent greatly improved the peak shape and markedly shortened the analysis time. Calibration curves of all the studied acridine derivatives were measured over a concentration range of 1.0·10^?6 – 1.0·10^?3 mol. L^?1 at two parallel detection wavelengths, 265 and 270 nm. Detection and quantification limits were evaluated for all the derivatives. The detection limits were in the region of μmol. L^?1 for most of the thioacridines. The calibration curves were used for quantification of the derivatives in human urine. No pretreatment of the real biological samples was necessary. The optimized CLC method enabled a good separation of the individual thioacridines from other compounds present in human urine samples and their quantification in a reasonable analysis time.     

Comparative study of capillary zone electrophoresis and micellar electrokinetic chromatography for the separation of twelve aromatic sulphonate compounds

Summary Two modes of capillary electrophoresis (CE), capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC), were investigated for the separation of 12 aromatic sulphonate compounds. In CZE, although the voltage applied, the buffer concentration and the pH were optimized for effective separation of the compounds studied, under the best conditions four of the five amino compounds coeluted, as did naphthalene-1-sulphonic acid and naphthalene-2-sulphonic acid. In MEKC, sodium dodecyl sulphate (SDS) and Brij 35 were chosen as the anionic and nonionic surfactants and the effect of the concentration of micelles was examined. The effect of adding methanol as the organic modifier was also investigated with each of these micellar systems. All the analytes, including the isomers, were completely separated by use of MEKC with Brij 35 but when SDS was used only 11 compounds were separated because two amino compounds coeluted.     

Octyl-type monolithic columns of 530 microm i.d. for capillary liquid chromatography

A novel monolithic capillary column (530 microm i.d.) was prepared for capillary liquid chromatography (CLC) by in situ copolymerization of octyl methacrylate (MAOE) and ethylene dimethacrylate (EDMA) in the presence of a porogen solvent containing 1-propanol, 1,4-butanediol, and water with azobisisobutyronitrile as the initiator. The influences of the contents of the porogen solvent, EDMA and the various concentration ratios of 1-propanol to 1,4-butanediol in the polymerization mixture on the morphology, porosity, globule size, stability and column efficiency were investigated. The morphology and pore size distribution of monolithic capillary columns were characterized by SEM and mercury intrusion porosimetry, respectively. Chromatographic evaluations of the columns were performed under CLC mode. The results showed that good permeability and stability can be obtained under optimal experimental conditions. The separation results of some acid, neutral and basic analytes demonstrated the hydrophobicity and low affinity to basic analytes of the new column. Three metal ions, i.e. Mg(II), Zn(II) and Cd(II) were also separated under ion-pair mode on the new monolithic capillary column and the results were acceptable.     

Investigation of solvent effects in capillary electrophoresis for the separation of biological porphyrin methyl esters

The effects of organic solvents on the capillary electrophoresis (CE) separation of a number of important biological porphyrin methyl esters - six weakly basic, hydrophobic cyclic tetrapyrroles possessing two and four to eight methyl ester groups around the periphery of the porphyrin ring - were investigated in the mode of micellar electrokinetic chromatography (MEKC), microemulsion electrokinetic chromatography (MEEKC), and nonaqueous CE. In aqueous MEKC, partial separation of the six neutral porphyrin methyl esters was obtained with an organic modifier (acetonitrile) in the concentration range between 20 and 40%, in which sodium dodecyl sulfate (SDS) molecules might be present in the form of SDS micelles and/or SDS micelle-like aggregates. Relatively stable SDS micelles can be formed in nonaqueous MEKC using formamide as the separation medium, but the separation of the target analytes remained unsatisfactory. Improved resolution of all six porphyrin methyl esters was obtained using MEEKC with the running buffer consisting of 0.8% w/w n-heptane (oil phase), 2.25% w/w SDS and 1.0% w/w Brij 35 (mixed surfactant), 6.6% w/w 1-butanol (cosurfactant), and 30% v/v 2-propanol (second cosurfactant), but reproducibility in terms of peak areas for certain porphyrins (especially uroporphyrin I octamethyl ester) was found to be very poor. Best separation performances were achieved with nonaqueous CE separations in which the weakly basic porphyrin methyl esters were protonated under strongly acidic conditions (e.g., using 10 mM perchloric acid) in mixed organic solvents. For example, using a 50:50 mixture of methanol and acetonitrile as the separation medium, baseline separation of all six (positively charged) porphyrin methyl esters can be obtained within 3 min and the average precision (RSD, N = 13) in terms of migration time and peak area were 0.55 and 2.16%, respectively.     

Rapid analysis using capillary supercritical fluid chromatography

Capillary supercritical fluid chromatography (SFC) is proving to be a viable and useful separation method for thermally labile and nonvolatile materials. As with other capillary chromatographic techniques, very fast separations can be accomplished by sacrificing total efficiency and optimizing the conditions for rapid analysis. This is achieved using short, small-bore capillary columns, increased mobile phase linear velocities and very fast pressure programming rates. These principles are demonstrated for the rapid separation of selected component systems.     

Separation of O- and C-allyl glycoside anomeric mixtures by capillary electrophoresis and high-performance liquid chromatography

Rapid and reliable methods for the analysis of O- and C-allyl galactopyranosides and glucopyranosides are presented, based on capillary zone electrophoresis (CZE) and micellar electrokinetic capillary chromatography (MEKC). In MEKC, the formation of chromophoric and charged complexes between the saccharides and borate as well as the hydrophobic interactions with micelles jointly contributed to the selective separation and sensitive detection of all the investigated anomeric couples. Some non-purified synthesis mixtures of C-allyl glycosides were successfully characterised without pre-treatment. MEKC buffer conditions for which glycosides separation was successfully achieved were then exported and applied to reverse-phase liquid chromatography (RP-HPLC), for the quantitative isolation of each allyl glycoside anomer. Identification of the obtained anomeric products was performed by electrospray mass spectrometry and (13)C NMR spectroscopy. Glycoside-solvent interactions driving the selective anomeric separation were shortly addressed and discussed on the basis of sugar derivatives structural differences.     

Optimized Method for the Determination of Prednisolone, Zn-Bacitracin and Phenylephrine in Local Pharmaceutical Preparations by Micellar Electrokinetic Capillary Chromatography

Summary A new, rapid and simple method is described and applied to resolve and quantify mixtures of prednisolone, Zn-bacitracin and phenylephrine. The determination was accomplished by MEKC. The separation was carried out at 25 °C and 30 kV, using a 5 mM phosphate-5 mM borate buffer (pH=8.2), 40 mM SDS as background electrolyte. Under these conditions, the run time was 6.6 min and the limits of quantification were about 1.0 mg L^–1 for every component. Repeatability and reproducibility studies were achieved showing no significant differences at 95% confidence level. The MEKC method has been applied for quantifying these compounds in different commercials pharmaceuticals products, without separations steps.     

Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.     

Electrically assisted capillary liquid chromatography using a silica monolithic column

A silica monolithic capillary column was linked to an open capillary of the same internal diameter via a Teflon sleeve to form a duplex column to investigate the combination of chromatography and electrophoresis in the mode of electrically assisted capillary liquid chromatography (eCLC). Using a commercial CE instrument with an 8.5 cm long, 100 μm i.d. reversed phase silica monolithic section and a window 1.5 cm beyond the end of this in a 21.5 cm open section, a minimum plate height of 9 μm was obtained in capillary liquid chromatography (CLC) mode at a low driving pressure of 50 psi. In eCLC mode, high speed and high resolution separations of acidic and basic compounds were achieved with selectivity tuning based on the flexible combination of pressure (0–100 psi) and voltage. Taking advantage of the excellent permeability of silica monolithic columns, use of a step flow gradient enabled elution of compounds with different charge state.     

Evaluation of the enantioseparation capability of the novel chiral selector clindamycin phosphate towards basic drugs by micellar electrokinetic chromatography

To date, a series of chiral selectors have been utilized successfully in capillary electrophoresis (CE). Among these various chiral selectors, macrocyclic antibiotics have been demonstrated to represent powerful enantioselectivity towards many chiral compounds. Differing from macrocyclic antibiotics, the use of lincosamide antibiotics as chiral selectors has not been reported previously. In our recent work, clindamycin phosphate belonging to the group of lincosamides has been first used as a chiral selector in capillary zone electrophoresis (CZE). In this paper, a micellar electrokinetic chromatography (MEKC) method has been developed for the evaluation of enantioseparation capability of this novel chiral selector towards several racemic basic drugs. As observed during the course of this work, clindamycin phosphate allowed excellent separation of the enantiomers of nefopam, citalopram, tryptophan, chlorphenamine, propranolol and metoprolol, as well as partial enantioresolution of tryptophan methyl ester and cetirizine. In this MEKC chiral separation system, different types of anionic surfactants, organic additives and background electrolytes were tested, and satisfactory enantioseparations of basic drugs above-mentioned were achieved using sodium dodecyl sulfate (SDS) as the surfactant, isopropanol as the organic additive, and phosphate as the background electrolyte. Furthermore, both migration times and enantioseparation of the analytes were influenced by several experimental parameters such as pH of the BGE, clindamycin phosphate and SDS concentrations, phosphate and isopropanol concentrations, and applied voltage. Consequently, the effects of these factors on enantioseparations of the studied basic drugs were systematically investigated in order to evaluate the stereoselectivity of clindamycin phosphate in MEKC.     

Determination of hydrolyzable tannins in the fruit of Terminalia chebula Retz. by high-performance liquid chromatography and capillary electrophoresis

A RP-HPLC method for determining fourteen components (gallic acid, chebulic acid, 1,6-di-O-galloyl-D-glucose, punicalagin, 3,4,6-tri-O-galloyl-D-glucose, casuarinin, chebulanin, corilagin, neochebulinic acid, terchebulin, ellagic acid, chebulagic acid, chebulinic acid, and 1,2,3,4,6-penta-O-galloyl-D-glucose) in the fruit of Terminalia chebula Retz. is described. The separation was achieved within 80 min using a binary gradient with mobile phases consisting of a pH 2.7 phosphoric acid solution and an 80% CH3CN solution. Capillary electrophoretic analyses were also attempted, and it was found that CZE (25 mM Na2B4O7, 5 mM NaH2PO4, pH 7.0) was an efficient method for the separation of gallotannins, while an MEKC method (25 mM Na2B4O7, 5 mM NaH2PO4, 20 mM SDS, pH 7.0, and 10% acetonitrile) provided a better separation for most of the tannins examined. The HPLC and CE methods developed were both successfully applied to the assay of tannins in commercial samples of Chebulae Fructus.     

Separation and determination of acrylamide in potato chips by micellar electrokinetic capillary chromatography

A simple and rapid method using micellar electrokinetic capillary chromatography (MEKC) was developed for the separation and determination of acrylamide in potato chips at low levels for the first time. The experimental conditions for the separation and quantification of acrylamide were optimized at first. The optimized conditions were: 50 mmol/L Na₂B₄O₇ and 40 mmol/L SDS at pH 10.0, 12 kV applied voltage, 76 cm total length (67 cm effective length) and 75 μm i.d. capillary, 198 nm wavelength, 15 cm high 25 s hydrodynamics sample injection, 20 °C air-cooling. The linear response of acrylamide concentration ranges from 0.5 to 100 μg/mL with high correlation coefficient (r = 0.9986, n = 9). The LOD and LOQ were estimated to be 0.1 and 0.33 μg/mL based on S/N = 3 and 10. The precision values (expressed as R.S.D.) of intra- and inter-day were 0.86-4.35% and 2.61-9.65%, respectively. Recoveries spiked at levels 2, 20, 60 μg/mL ranged between 90.86% and 99.6% with R.S.D. less than 6.5%. Finally, the developed method has been applied to the analysis of real samples and has achieved satisfactory results. All of these indicated that it was a reliable method for the quantification of acrylamide in potato chips.     

Micellar and microemulsion electrokinetic chromatography of hop bitter acids

The elution order of the hop α- and β-acids has been studied under different modes of electrokinetic separation. A model is advanced to explain the shorter migration times of the more hydrophobic β-acids compared to the α-acids in micellar electrokinetic chromatography (MEKC). For quality control of the bitter principles in hops, the ruggedness of electrokinetic separation could be improved by replacing MEKC by microemulsion electrokinetic chromatography (MEEKC).     

Investigation of some modes of flat-bed chromatography

A comparison of different chromatographic methods is presented: column liquid chromatography (CLC), thin layer chromatography (TLC), and continuous-elution flat-bed chromatography (CEFBC), which is in fact a combination of the first two methods. In CEFBC a sample is applied to a sorbent layer in a steady flow of eluent, and the components are detected directly on the layer, or immediately upon leaving it, during the separation process. It is shown that evaluation of the separation processes in CEFBC is best accomplished in terms of the parameters applicable in CLC. The reproducibility of the analytical results obtained by CEFBC is better than in the case of TLC by a factor of 6 to 10, and approaches that known for CLC.