Observation of record flux pinning in melt-textured NEG-123 superconductor doped by Nb, Mo, and Ti nanoparticles

Flux pinning in melt-processed (Nd_0.33Eu_0.33Gd_0.33)Ba₂Cu₃O_y “NEG-123” + 35 mol% Gd₂BaCuO₅ “NEG-211” (70 nm in size) composite doped by TiO₃, MoO₃ and Nb₂O₅ achieved record values. The optimum values of all three dopands were found to be around 0.1 mol%. Transmission electron microscope (TEM) analysis found clouds of <10 nm sized particles in the NEG-123 matrix, shifting the pinning particle size distribution to significantly lower values. TEM by energy dispersive X-ray spectroscopy (EDX) analysis clarified that these nanoparticles contained a significant amount of Nb, Mo, and Ti. Appearance of nanometer-sized defects correlated with a significantly improved flux pining at low and medium magnetic fields, which was particularly significant at high temperatures. In the Nb-doped sample, a record J_c value of 925 kA/cm² at the secondary peak field (4.5 T) was achieved at 65 K, 640 kA/cm² at zero field at 77 K, and 100 kA/cm² at 90.2 K, the last value having been up to now considered as a good standard for REBa₂Cu₃O_y “RE-123” materials at 77 K. The greatly improved J_c–B performance in Nb/Mo/Ti doped samples can be easily translated to large-scale LRE-123 (LRE = light rare earths, Nd, Eu, Gd, Sm) blocks intended for real superconducting super-magnets applications.     

Deposition of Gd2Zr2O7 single buffer layers with different thickness for YBa2Cu3O7−δ coated conductors on metallic substrates

A series of Gd₂Zr₂O₇ (GZO) single buffer layers with different thicknesses were epitaxially grown on highly textured Ni–5 at.% W tapes using pulsed laser deposition. These allow the subsequent growth of high-quality superconducting YBa₂Cu₃O_7?δ layers. The superconducting transition temperature T_c reaches a maximum value of 92.4 K as well as a narrow transition width of 0.8 K for the optimized GZO layer thickness. The inductive measurements show the critical current density as high as 1.2 MA/cm² at 77 K in self-field, indicating that a GZO single buffer layer is a suitable alternative for simplifying the second generation high T_c superconducting coated conductors architecture.     

Effects on Jc of pinning center morphology for multiple-in-line-damage in coated conductor and bulk,melt-textured HTS

The properties of discontinuous aligned pinning centers (PCs) created by high-energy heavy-ions are compared for bulk melt-textured and coated conductor HTS. Properties of PCs, which increase J_c (pinning potential and entanglement), and negative properties which decrease J_c (e.g., decreased T_c and percolation paths) are evaluated. Mechanisms are proposed to explain the very large increases in J_c resulting from multiple-in-line-damage (MILD) compared to continuous columnar pinning centers (CCPC). In particular, a mechanism which results in fluxoid entanglement, even for parallel (unsplayed) PCs, is discussed. The same mechanism is found to also account for restoration of much of the pinning potential expected to be lost due to the gaps in MILD PCs. It also accounts for the fact that at high fluence, J_c increases as fluence is increased, instead of decreasing as expected. The very low self-field in coated conductor permits separation of the negative and positive effects of PCs. It is found that parameters developed to quantify the negative effects in bulk melt-textured YBCO, by 63 GeV U²³⁸ ions, successfully describe damage to 2.1 μm thick coated conductor by 1 GeV Ru⁴⁴ ions. Coated conductor at 77 K and self-field is generally known to have J_c about 100 times that of melt-textured YBCO. However, at 77 K and applied field of 1 T, when both forms of HTS are processed with comparable numbers of near-optimum MILD PCs, the difference in J_c is reduced to a factor of 1.3–2. Whereas J_c for melt-textured YBCO increased sharply, by a factor of up to 16.8 for high-fluence MILD PCs, J_c in coated conductor increased by a smaller factor of 2.5–3.0. Nevertheless, 2.1 μm thick coated conductor, with near-optimum MILD PCs, exhibits J_c = 543 kA/cm² at 77 K and applied field of 1.0 T, and I_c = 114 A/cm-width of conductor. This is the highest value we find in the literature. The phenomenology developed indicates that for optimum MILD PCs in coated conductor, J_c ～ 700 ± 70 kA/cm² should be achievable at 77 K, 1.0 T.     

Alumina nano-inclusions as effective flux pinning centers in Y–Ba–Cu–O superconductor fabricated by seeded infiltration and growth

The YBa₂Cu₃O_7?x (Y123) textured bulk superconductors with various amounts of nanometer alumina particles were fabricated by a seeded infiltration and growth process. The addition of nanometer alumina was found to be effective for an improvement of the superconducting properties. The critical current density (J_c) values were increased twice in self field with a slight addition amount of nanometer alumina particles (maximum J_c at 0.01 wt.% alumina addition). The present work suggests that the use of insulating inclusions in the nanometer sub-scale can stabilize the flux-line lattice and greatly enhance the pinning capabilities of the infiltrated samples. No refinement of Y211 particles was observed with alumina addition. The J_c improvement by nanometer alumina inclusions is likely rendered to the insulating nano-pinning centers that have been successfully embedded into superconducting Y123 matrix. On the other hand, we examined the effect of the pinning centers size on the superconducting properties of infiltrated YBCO bulk samples. To this effect insulating nano-pinning centers with two different size distributions has been successfully incorporated within YBCO matrix of bulk superconductor by slightly doping with nano-particle alumina dispersions. Two alumina nano-particle dispersions with mean size diameters of about 20 nm and 130 nm were used. It was shown that the size of the pinning centers can affect considerably the J_c performances and the pinning mechanism.     

(RE0.33Eu0.33Gd0.33)Ba2Cu3Oy bars processed in air

Bars of REBa₂Cu₃O_y superconductor with three different rare earths were prepared by floating zone technique in air. Their nominal composition is (RE_0.33Eu_0.33Gd_0.33)Ba₂Cu₃O_y (RE=Y, La, Pr, Nd, Sm and Yb). The mixing of these three elements leads to a single phase formation. The physical properties of these systems and their microstructure were studied. All the compositions exhibit a superconducting transition excepted that one containing Pr and substitution of Ba by RE is avoided excepted in the case of RE=La. Only the phase with Nd shows a pronounced fishtail effect and the phase with Sm exhibits a very high J_c value of 70 000 A/cm² in self-field and more than 30 000 A/cm² at 1.7 T.     

Observation of nanostripes and -clusters in (Nd, EuGd)Ba2Cu3Ox superconductors

Nanostripes are observed in melt-textured and single-crystalline samples of the ternary light rare earth (LRE)-compound (Nd_0.33Eu_0.33Gd_0.33)Ba₂Cu₃O_x (NEG) by means of atomic force microscopy, scanning tunnelling microscopy at ambient conditions, combined with transmission electron microscopy and electron backscatter diffraction. This enables the observation of several important features: The nanostripes are formed by chains of nanoclusters, representing the LRE/Ba substitution. The dimensions of the nanostripes are similar for both types of NEG samples. The periodicity of the nanostripes is found to range between 40 and 60 nm; the shape of the nanoclusters is elliptic with a major axis length between 300 and 500 nm and a minor axis length of about 30–150 nm. The stripes are filling effectively the space in between the twin boundaries. Concerning the flux pinning, the nanoclusters are the important pinning sites, not the nanostripes themselves.     

Embedding of insulating nano-inclusions in Y-123 superconductor as pinning centers: The influence of size

The optimization of flux line pinning in superconductors is one of the most efficient ways to improve the transport properties of these materials. The generation of effective artificial pinning centers in a controlled way and with optimal dimensions can contribute to the enhancement of pinning capability and to the improvement of the critical current densities J_c. In this work, we examined the effectiveness of an insulating inclusion in a type II superconductor as a pinning center with a size close to the penetration depth λ instead of the coherence length ξ. To this effect, insulating nano-pinning centres (100–150 nm) have been successfully embedded into superconducting YBa₂Cu₃O_7?d (Y-123) matrix by slightly doping with nano-particle alumina dispersions. Two alumina nano-particle dispersions with mean size diameters of about 130 nm and 150 nm which are considerably larger than the coherence length ξ of Y-123 were used. A systematic study of the relationship of J_c(H,T) with different amounts of D₁ and D₂-nanoalumina additions was performed to determine the optimum nano-particle doping contents. The results indicate that slight inclusions of D₁ or D₂-nanoalumina can effectively enhance the flux pinning capability of samples. The best flux pinning was observed in the sample with 10^?2 wt.% D₁-alumina and 3 × 10^?2 wt.% D₂-alumina. The present work suggests that the use of sufficiently large insulating inclusions in the nanometer sub-scale can stabilize the flux-line lattice. It also shows that the optimal size for an insulating inclusion, acting as a pinning center in bulk material, is more likely related to λ than to ξ.     

Increase of critical current density with doping carbon nano-tubes in YBa2Cu3O7−δ

The effects of carbon nano-tubes (CNTs) on the crystal structure and superconducting properties of YBa₂Cu₃O_7?δ (Y-123) compound were studied. Samples were synthesized using standard solid-state reaction technique by adding CNT up to 1 wt% and X-ray diffraction data confirm the single phase orthorhombic structure for all the samples. Current–voltage measurements in magnetic fields up to 9 T were used to study the pinning energy U_J and critical current density J_c as a function of magnetic field at fixed temperature. We find that while T_c does not change much with the CNT doping (91–92 K), both U_J and J_c increase systematically up to 0.7 wt% CNT doping in a broad magnetic field ranges between 0.1 and 9 T and J_c in the 0.7 wt% CNT doped sample is at least 10 times larger than that of the pure Y-123. The scanning electron microscope image shows that CNTs are forming an electrical-network between grains. These observations suggest that the CNT addition to the Y-123-compounds improve the electrical connection between superconducting grains to result in the J_c increase.     

High performance batch production of LREBa2Cu3Oy using novel thin film Nd-123 seed

A batch production for fabrication of LREBa₂Cu₃O_y (LRE: Sm, Gd, NEG) “LRE-123” pellets are developed in air and Ar-1% O₂ using a novel thin film Nd-123 seeds grown on MgO crystals. The SEM and XRD results conformed that the quality and orientation of the seed crystals are excellent. On the other hand, new seeds can withstand temperatures >1100 °C, as a result, the cold seeding process was applied even to grow Sm-123 material in Air. The trapped field observed in the best 45 mm single-grain puck of Gd-123 was in the range of 1.35 T and 0.35 T at 77.3 K and 87.3 K, respectively. The average trapped field at 77.3 K in the 24 mm diameter NEG-123 samples batch lies between 0.9 and 1 T. The maximum trapped field of 1.2 T was recorded at the sample surface. Further, the maximum trapped field of 0.23 T at 77 K was recorded in a sample with 16 mm diameter of Sm-123 with 3 mol% BaO₂ addition. As a result we made more then 130 single grain pucks within a couple of months. Taking advantage of the single grain batch processed material, we constructed self-made chilled levitation disk, which was used on the open day of railway technical research Institute. More then 150 children stood on the levitation disk and revel the experience of levitation. The present results prove that a high-performance good-quality class of LREBa₂Cu₃O_y material can be made by using a novel thin film Nd-123 seeds.     

High temperature protonic conduction in Sr-doped LaP3O9

Electrical conduction of Sr-doped LaP₃O₉ ([Sr]/{[La] + [Sr]} = 2–10 mol%) was investigated under 0.4–5 kPa of p(H₂O) and 0.01–100 kPa of p(O₂) or 0.3–3 kPa of p(H₂) at 573–973 K. Sr-doped LaP₃O₉ showed apparent H/D isotope effect on conductivity regardless of the Sr-doping level under both H₂O/O₂ oxidizing and H₂/H₂O reducing conditions at investigated temperatures. Conductivities of the material were almost independent of p(O₂) and p(H₂O). These results demonstrated that the Sr-doped LaP₃O₉ exhibited protonic conduction under wide ranges of p(O₂), p(H₂O) and temperature. The conductivity of the Sr-doped LaP₃O₉ increased with increasing Sr concentration up to its solubility limit, ca. 3 mol%, while the further Sr-doping slightly degraded the conductivity. These indicate that Sr²⁺ substitution for La³⁺ leads to proton dissolution into the material and induced protonic conduction. Conductivities of the 3 mol% Sr-doped sample were 2 × 10^- 6–5 × 10^− 4 S cm^− 1 at 573–973 K.     

Effect of Li2CO3 addition on the structural,optical, ferroelectric,and electric-field-induced strain of lead-free BNKT-based ceramics

In this work, we reported the effect of Li₂CO₃ addition on the structural, optical, ferroelectric properties and electric-field-induced strain of Bi_0.5(Na,K)_0.5TiO₃ (BNKT) solid solution with CaZrO₃ ceramics. Both rhombohedral and tetragonal structures were distorted after adding Lithium (Li). The band gap values decreased from 2.91 to 2.69 eV for 5 mol% Li-addition. The maximum polarization and remanent polarization decreased from 49.66 μC/cm² to 27.11 μC/cm² and from 22.93 μC/cm² to 5.35 μC/cm² for un-doped and 5 mol% Li- addition BNKT ceramics, respectively. The maximum S_max/E_max value was 567 pm/V at 2 mol% Li₂CO₃ access. We expected this work will help to understand the role of A-site dopant in lead-free ferroelectric BNKT materials.     

Oxygen diffusion studies on (Y2O3)2(Sc2O3)9(ZrO2)89

The oxygen tracer diffusion coefficient (D?) has been measured for 9 mol% scandia 2 mol% yttria co-doped zirconia solid solution, (Y₂O₃)₂(Sc₂O₃)₉(ZrO₂)₈₉, using isotopic exchange and line scanning by Secondary Ion Mass Spectrometry, as a function of temperature. The values of the tracer diffusion coefficient are in the range of 10^? 8–10^? 7 cm² s^? 1 and the Arrhenius activation energy was calculated to be 0.9 eV; both valid in the temperature range of 600–900 °C. Electrical conductivity measurements were carried out using 2-probe and 4-probe AC impedance spectroscopy, and a 4-point DC method at various temperatures. There is a good agreement between the measured tracer diffusion coefficients (D?, Ea = 0.9 eV) and the diffusion coefficients calculated from the DC total conductivity data (D_σ, Ea = 1.0 eV), the latter calculated using the Nernst–Einstein relationship.     

Incorporation of Ce3+ in crystalline Gd-silicate nanoclusters formed in silica

Structural and optical properties of sol–gel silica based glassceramics doped with 0.1 mol% Ce and codoped with Gd at high concentrations, from 5 mol% up to 40 mol%, are investigated and compared to those of analogous samples doped only with Ce. Raman scattering, transmission electron microscopy, and x-ray diffraction reveal the formation of Gd apatite-like silicate (Gd_4.67O(SiO₄)₃) and of Gd pyrosilicate (Gd₂Si₂O₇) nanophases whose morphology and crystallinity depend on the Gd concentration and thermal treatments. Optical absorption measurements demonstrate the role of the densification atmosphere in modifying the charge state of Ce ions. The incorporation of Ce³⁺ ions in the nanophases is put in evidence by photo- and radio-luminescence results.     

Electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr

The series of Gd_4 ? xM_xAl₂O_9 ? x/2 (M = Ca, Sr) with x = 0, 0.01, 0.05, 0.10 and 0.25 was prepared by the citrate complexation method. Both Gd_4 ? xCa_xAl₂O_9 ? x/2 and Gd_4 ? xSr_xAl₂O_9 ? x/2 show the monoclinic cuspidine structure with space group of P2₁/c up to 0.05–0.1 and 0.01–0.05 mol for Ca and Sr, respectively. Beyond the substitution limit of Gd₄Al₂O₉, GdAlO₃ and SrGd₂Al₂O₇ appear as additional phases. The highest electrical conductivity obtained at 900 °C yielded σ = 1.49 × 10^? 4 S/cm for Gd_3.95Ca_0.05Al₂O_8.98. In comparison, the conductivity of pure Gd₄Al₂O₉ was σ = 1.73 × 10^? 5 S/cm. The conductivities determined are in a similar range as those of other cuspidine materials investigated previously. The thermal expansion coefficient of Gd₄Al₂O₉ at 1000 °C was 7.4 × 10^? 6 K^? 1. The phase transition between 1100 and 1200 °C reported earlier changes with increasing substitution of Ca and Sr.     

Synthesis and characterization of excess magnesium MgB2 superconductor under inert carbon environment

The structural, transport and magnetic properties of MgB₂ superconductor heavily blended with Mg is studied. The samples are synthesized with a new approach in both, pressed carbon environment and in flowing argon. The excess magnesium used is observed to play dual role: one being the prevention of Mg losses during the synthesis process and hence maintaining the stoichiometry of MgB₂ phase, and second being the formation of Mg milieu probably all around the MgB₂ grains to give a dense structure. Excess Mg also improves the grain connectivity by going into the pores and there by minimizing the insulating junctions. The residual resistivity of the sample is observed to decrease from 57.02 μΩ cm to 10.042 μΩ cm as it is progressively filled with superconductor–normal–superconductor (SNS) type junctions amongst the grains by the virtue of increased magnesium content. The synthesized samples devoid of porosity show the superconducting transition, T_c in the range of 39–34 K as of clean MgB₂ samples, though overloaded with Mg. The excess Mg resulted in enhanced critical current density, J_c from 6.8 × 10³ A cm^?2 to 5.9 × 10⁴ A cm^?2 at 20 K and 10 kOe, with reasonable decrease in the superconducting transition. Thus our samples being overloaded with Mg impart mechanical strength and competitive superconducting properties, which forms a part of interest.     

Large transport critical currents of powder-in-tube Sr0.6K0.4Fe2As2/Ag superconducting wires and tapes

We report the achievement of transport critical currents in Sr_0.6K_0.4Fe₂As₂ wires and tapes with a T_c = 34 K. The wires and tapes were fabricated through an in situ powder-in-tube process. Silver was used as a chemical addition as well as a sheath material. All the wire and tape samples have shown the ability to transport superconducting current. Critical current density J_c was enhanced upon silver addition, and at 4.2 K, a largest J_c of ～1200 A/cm² (I_c = 9 A) was achieved for 20% silver added tapes, which is the highest in iron-based wires and tapes so far. The J_c is almost field independent between 1 T and 10 T, exhibiting a strong vortex pinning. Such a high transport critical current density is attributed to the weak reaction between the silver sheath and the superconducting core, as well as an improved connectivity between grains. We also identify a weak-link behavior from the apparent drop of J_c at low fields and a hysteretic phenomenon. Finally, we found that compared to Fe, Ta and Nb tubes, Ag was the best sheath material for the fabrication of high-performance 122 type pnictide wires and tapes.     

Pinning,thermally activated depinning and their importance for tuning the nanoprecipitate size and density in high Jc YBa2Cu3O7−x films

YBa₂Cu₃O_7?x (Y123) films with quantitatively controlled artificial nanoprecipitate pinning centers were grown by pulsed laser deposition (PLD) and characterized by transport over wide temperature (T) and magnetic field (H) ranges and by transmission electron microscopy (TEM). The critical current density J_c was found to be determined by the interplay of strong vortex pinning and thermally activated depinning (TAD), which together produced a non-monotonic dependence of J_c on c-axis pin spacing d_c. At low T and H, J_c increased with decreasing d_c, reaching the very high J_c ～ 48 MA/cm² ～20% of the depairing current density J_d at 10 K, self-field and d_c ～ 10 nm, but at higher T and H when TAD effects become significant, J_c was optimized at larger d_c because longer vortex segments confined between nanoprecipitates are less prone to thermal fluctuations. We conclude that precipitates should extend at least several coherence lengths along vortices in order to produce irreversibility fields H_irr(77 K) greater than 7 T and maximum bulk pinning forces F_p,max(77 K) greater than 7–8 GN/m³ (values appropriate for H parallel to the c-axis). Our results show that there is no universal pin array that optimizes J_c at all T and H.     

La0.8Sr0.2Cr1 − xRuxO3 − δ–Gd0.1Ce0.9O1.95 solid oxide fuel cell anodes: Ru precipitation and electrochemical performance

Composites containing La_0.8Sr_0.2Cr_1 ? xRu_xO_3 ? δ (LSCrRu) with x = 0–0.25 and Gd_0.1Ce_0.9O_1.95 (GDC) were studied as anodes in solid oxide fuel cells (SOFCs) with La_0.9Sr_0.1Ga_0.8Mg_0.2O_3 ? δ (LSGM) electrolytes. Electrode polarization resistance R_P decreased during initial SOFC operation before reaching a minimum. The decrease was more rapid, and the ultimate R_P value reached was generally lower, with increasing temperature and Ru content x. R_P was stable at longer times except for x = 0.25 where it increased slightly. SOFCs with x = 0.18 anodes at 800 °C yielded power densities as high as 0.53 W/cm² with an R_P value, including the (La,Sr)(Co,Fe)O₃–GDC cathode, of < 0.15 Ω cm². Transmission electron microscopy revealed Ru nano-particles on LSCrRu surfaces; their size increased and their density decreased with increasing temperature. Increasing the Ru content increased the density of Ru surface particles at a given time and temperature. Measured early-stage Ru surface coverage values were consistent with a model where Ru supply to the LSCrRu surface was limited by Ru bulk out-diffusion, but the coverage saturated at longer times. There was surprisingly little Ru particle coarsening over times up to 1000 h at 800 °C, with Ru particles sizes remaining < 10 nm. The cell R_P values generally decreased with increasing Ru nano-particle surface area.     

MWA and scanning-probe study of argon-ion irradiation effects on superconducting properties of Bi2Sr2CaCu2O8 thin films

Bi₂Sr₂CaCu₂O₈ films with thickness of 200 and 800 nm were irradiated with monovalent argon ions with an energy of 40 keV and a dose ranging between 10¹⁴ and 10¹⁷ ion/cm². The dose dependences of (i) the superconducting transition temperature, (ii) the critical current density value and (iii) the irreversibility line position on the magnetic field-temperature phase diagram were determined for two series of samples of different thickness. Atomic force microscopy images of the irradiated samples showed an appearance of defects in the form of surface holes. The obtained data were used to establish conditions for improving properties of thin-film superconducting materials. Firstly, the irradiation dose should be at least 10¹⁶ ion/cm² to form embedded gas bubbles and surface holes serving as artificial pinning centers. Secondly, the film thickness and the average depth of the defect formation should be of a comparable value and sufficiently exceed the thickness of the surface layer sputtered as a result of irradiation.     

Color tunable emission from (GdxY1−x)2O3: Er3+, Yb3+ phosphor prepared by combustion method

The (Gd_xY_1?x)₂O₃: Er³⁺, Yb³⁺ [x=0.0, 0.1, 0.5, 0.9, 1.0] phosphor samples with 0.5 mol% concentration of Er³⁺ and 3.0 mol% of Yb³⁺, have been prepared using combustion route. The effect of variation of composition on the morphology, crystallinity and photoluminescence characteristics of the material has been investigated. The samples were post-heated at a temperature 1200 °C, for 5 h. We find systematic color tunability from red to green with an increase of Gd₂O₃ content in Y₂O₃ lattice. Further, the post-heated samples show an enhancement of fluorescence intensity for more than fifteen times. The samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence measurement and Fourier transform infrared (FTIR) techniques in order to find out the structural changes in host lattice. An increase in crystallite size has been marked with increasing Gd content while FTIR analysis explains the reason of variation in the fluorescence of rare earth ions in different host matrices.