Filler network structure in graphene nanoplatelet (GNP)-filled polymethyl methacrylate (PMMA) composites: From thermorheology to electrically and thermally conductive properties

In this work, graphene nanoplatelet (GNP) filled polymethyl methacrylate (PMMA) composites were prepared using solution method via a specially designed route and relatively high thermal conductivities of the composites were achieved at a low GNP loading. The effect of GNP content on rheological behavior, thermal and electrical conductivity of the composites was intensively investigated. Thermorheological complexity was displayed at elevated GNP loading, and the rheological percolation threshold of GNP in PMMA decreased from 7.96 wt% at 220 °C to 4.02 wt% at 260 °C according to Winter-Chambon method, suggesting that GNP was more likely to form a seepage network at higher temperature. The DMTA results showed that the increase in moduli of the composites should be ascribed to the formation of the GNP-GNP network structure. The electrical conductivity of the composites underwent a sudden jump by seven orders of magnitude, which also indicated the formation of a GNP conductive pathway in the matrix with an electrical percolation threshold of 2–4 wt%. The results of transient temperature measurement were in good consistent with the thermal conductivity versus GNP loading, which was compared with various thermal conduction models with a modified Agari model presenting an acceptable evaluation of the dispersion status of GNP in the matrix. The experimental electrical and thermal conductivities as a function of GNP content could well be interpreted by the filler network structure as observed in morphological studies.     

Low percolation conductive graphite flakes-filled poly(urethane-imide) composites with high thermal stability via imidization self-foaming structure

In the study, the conductive graphite flakes filled poly(urethane-imide) composites (PUI/GFs) with high performance were constructed by the thermal imidization self-foaming reaction. It was found that the foaming action could promote the redistribution of GFs during curing process and the formation of stable linear conductive pathways. The percolation threshold of PUI/GFs composites was lowered from 1.26 wt% (2000 mesh GFs) or 0.86 wt% (1000 mesh GFs) to 0.79 wt% (500 mesh GFs), which were relatively low percolation thresholds for polymer/GFs composites so far. When the content of 500 mesh GFs was 4.0 wt%, the electrical conductivity of the composite was as high as 3.96 × 10^?1 S/m. Also, a poly(urethane-imide) (PUI) matrix with excellent thermal stability (T_d10%: 334.97 °C) and mechanical properties (elongation at break: 324.52%, tensile strength: 15.88 MPa) was obtained by introducing the rigid aromatic heterocycle into the polyurethane (PU) hard segments. Moreover, the zero temperature coefficient of resistivity for the composites was observed at the temperature range from 30 °C to 200 °C. Consequently, PUI/GFs composites may provide the novel strategy for considerable conductive materials with high thermal stability in electrical conductivity.     

Deep eutectic silsesquioxane hybrids with quaternary ammonium/urea derivatives: synthesis and physicochemical and ion-conductive properties

We report the synthesis of deep eutectic silsesquioxane hybrids (DE-SQs) by simple mixing of quaternary-ammonium-containing SQ and urea derivatives. Cationic SQ, which was prepared by the hydrolytic condensation of a triethoxysilane precursor derived from 2-(dimethylamino)ethyl acrylate, followed by a quaternization reaction with methyl iodide, was used as a quaternary-ammonium-containing SQ component. Cationic SQ reacted with urea at a 1:2 M ratio at 80 °C for 48 h to yield a viscous DE-SQ (2Urea) liquid with a low glass transition temperature (T_g = ?11 °C). Urea derivatives—1,3-dimethylurea (DMU) and 1,3-dimethylthiourea (DMTU)—were additionally used as hydrogen bond donors to form low-T_g DE-SQs. The thermal, physical, and ion-conductive properties of the DE-SQ family of organic–inorganic hybrids were investigated and characterized, and the influences of the nature of the urea derivative and their feed ratios on DE-SQ formation were evaluated. Among the DE-SQs developed in this study, DE-SQ (2Urea) and DE-SQ (2DMTU) achieved the highest ionic conductivity, with DE-SQ (2Urea) exhibiting 2.35 × 10^?6 and 6.63 × 10^?4 S cm^?1 at 25 and 75 °C, respectively, under anhydrous conditions. This is the first report on the synthesis of DE-SQs by simple mixing of two solids, wherein the resulting compounds exhibit low T_g, thermal stability, and characteristic ionic conductivity. The ability to incorporate unique DE units into the SQ structure facilitates the development of advanced organic–inorganic hybrid materials possessing a wide range of functions and applications.     

Alkaline-developable and negative-type photosensitive polyimide with high sensitivity and excellent mechanical properties using photo-base generator

An alkaline developable and negative-type PSPI with a high sensitivity and excellent mechanical properties based on a poly(amic acid) (PAA) and a photo-base generator has been developed. The PAA was prepared by the polycondensation of p-phenylenediamine (PDA) with an equimolar of 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA) and converted thermally to the corresponding polyimide, PI(PDA-BPDA/6-FDA). PI(PDA-BPDA/6-FDA) showed the high thermal and mechanical properties and the dimensional stability such as the thermal decomposition temperature of 530°C, glass transition temperature of 369°C, linear coefficient of thermal expansion of 28 ppm/K, ultimate tensile strength of 148 MPa, elongation at break of 25% and dielectric constant of 2.8. The PSPI was formulated directly from PAA(PDA-BPDA/6-FDA) with a photo-base generator (PBG), (E)-3-(2-hydroxy-4-methoxyphenyl)-1-(piperidin-1-yl)prop-2-en-1-one (HMPP) (10 wt% to PAA) and the optimized parameters for photolithographic process were investigated including the PBG content, post-exposure bake (PEB) temperature, and PEB time. The PSPI based on PAA(PDA-BPDA/6-FDA) and HMPP (10 wt% to PAA) showed a sensitivity of 114 mJ/cm² and contrast of 1.29 when exposed to 365-nm light (i-line), post-exposure baked at 160°C for 5 min, and developed with an aqueous solution of 2.38 wt% tetramethylammonium hydroxide and iso-propanol. A clear negative 8-μm features pattern was obtained by contact-printing and converted into the PI pattern upon heating at 250°C, confirming by scanning electron microscopy and infrared spectroscopy.     

Room temperature processable heat‐resistant epoxy‐oxazolidone‐based syntactic foams

Syntactic foams based on oxazolidone‐modified epoxy resin using glass microballoons as reinforcing filler with varying densities were processed. The influence of various grades of microballoons and their concentration on the mechanical, thermal, thermomechanical, and flammability characteristics were investigated. The effect of temperature on the compressive strength with density was monitored in detail. By incorporating the microballoons, T_g of the syntactic foam increased from 90 °C to 115 °C. Thermal conductivity was found to decrease from (0.064 to 0.056 W/(m·K)) in conjunction with decreasing resin to filler ratio. In the case of composites filled with K25 alone, the creation of large voids due to less effective packing between the microballoons led to lower thermal conductivity. The specific heat of the different composites was in the range of 0.32 to 0.44 cal/g/°C, and the coefficient of thermal expansion was in the range of 13.2 to 17.4 × 10⁻⁶/°C with limiting oxygen index of 28% to 33%.     

Novel polymer electrolytes prepared by copolymerization of ionic liquid monomers

Ionic liquid monomer couples were prepared by the neutralization of 1‐vinylimidazole with vinylsulfonic acid or 3‐sulfopropyl acrylate. These ionic liquid monomer couples were viscous liquid at room temperature and showed low glass transition temperature (Tg) at ?83 °C and ?73 °C, respectively. These monomer couples were copolymerized to prepare ion conductive polymer matrix. Thus prepared ionic liquid copolymers had no carrier ions, and they showed very low ionic conductivity of below 10^?9 S cm^?1. Equimolar amount of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) to imidazolium salt unit was then added to generate carrier ions in the ionic liquid copolymers. Poly(vinylimidazolium‐co‐vinylsulfonate) containing equimolar LiTFSI showed the ionic conductivity of 4 × 10^?8 S cm^?1 at 30 °C. Advanced copolymer, poly(vinylimidazolium‐co‐3‐sulfopropyl acrylate) which has flexible spacer between the anionic charge and polymer main chain, showed the ionic conductivity of about 10^?6 S cm^?1 at 30 °C, which is 100 times higher than that of copolymer without spacer. Even an excess amount of LiTFSI was added, the ionic conductivity of the copolymer kept this conductivity. This tendency is completely different from the typical polyether systems. Copyright © 2002 John Wiley & Sons, Ltd.     

Melt processed polyethylene/fullerene nanocomposites with highly improved thermo-oxidative stability

The thermo-oxidative stability of melt processed polyethylene composites with the two fullerenes C₆₀ and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) was studied with the aim of comparing the stabilization effect of both fullerenes on three different polyethylenes (PE). The results obtained show that, irrespective of the specific polyethylene being considered, C₆₀ loadings as low as 1.0 wt% cause a dramatic increase in the thermo-oxidative stability of the corresponding composites (up to 64.8 °C at T2% and 113.8 °C at T5%, TX% being the temperature corresponding to a mass loss of X wt%), in agreement with previous reports. Furthermore, and more importantly, this work shows for the first time that the thermo-oxidation stability effect caused by PCBM is even higher than that of C₆₀, the difference between both being particularly significant in the early stages of degradation, i.e. for mass losses ≤2 wt%. For example, polyethylene composites with 1.0 wt% PCBM show T2% values which are systematically higher than those of the corresponding composites with 1.0 wt% C₆₀, the difference between the T2% values of the two composites being 38.8 °C, 67.1 °C and 26.4 °C in the three different polyethylenes considered. Therefore, when compared with C₆₀, PCBM is particularly more effective at delaying the beginning of the thermo-oxidative degradation. According to our results, PCBM loadings as low as 1.0 wt% can increase the thermo-oxidative stability of polyethylene composites by more than 130 °C and these are, as far as we know, the highest thermo-oxidative stability results induced by nanoparticles ever reported in the literature for polyethylene.     

Studies on ionic liquid-based corn starch biopolymer electrolytes coupling with high ionic transport number

Biopolymer electrolytes containing corn starch, lithium hexafluorophosphate (LiPF₆) and ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (BmImTf) were prepared by solution casting technique. The ionic conductivity was found to increase with increasing ionic liquid concentration. Upon doping with 80 wt% of BmImTf, the ionic conductivity increased by three orders of magnitude. The highest ionic conductivity of (3.21 ± 0.01) × 10^?4 S cm^?1 was achieved at ambient temperature. The complexation between corn starch, LiPF₆ and BmImTf was further proven in attenuated total reflectance-Fourier transform infrared findings. The highest conducting biopolymer electrolyte was stable up to 230 °C, as proven in thermogravimetric analysis.     

Preparation and characterization of form-stable tetradecanol–palmitic acid expanded perlite composites containing carbon fiber for thermal energy storage

In this study, tetradecanol–palmitic acid/expanded perlite composites containing carbon fiber (TD-PA/EP-CF CPCMs) were prepared by a vacuum impregnation method. Binary eutectic mixtures of PA and TD were utilized as thermal energy storage material in the composites, where EP behaved as supporting material. X-ray diffraction demonstrated that crystal structures of PA, TD, EP, and CF remained unchanged, confirming no chemical interactions among raw materials besides physical combinations. The microstructures indicated that TD-PA was sufficiently absorbed into EP porous structure, forming no leakage even in molten state. Differential scanning calorimetry estimated the melting temperature of TD-PA/EP-CF CPCM to 33.6 °C, with high phase change latent heat (PCLH) of 138.3 kJ kg⁻¹. Also, the freezing temperature was estimated at 29.7 °C, with PCLH of 137.5 kJ kg⁻¹. The thermal cycling measurements showed that PCM composite had adequate stability even after 200 melting/freezing cycles. Moreover, the thermal conductivity enhanced from 0.48 to 1.081 W m⁻¹ K⁻¹ in the presence of CF. Overall, the proposed CPCMs look promising materials for future applications due to their appropriate phase change temperature, elevated PCLH, and better thermal stability.

     

Performance of high-temperature thermosetting polyimide composites modified with thermoplastic polyimide

The preparation of polyimide (PI) resin with high heat resistance and toughness is a significant challenge. In this study, thermoplastic PI (TPI) was used to toughen thermosetting PIs, and toughened PI (TPI/PI) blends were prepared. The modified PI resin system exhibited good thermal stability, excellent heat resistance, and high toughness. The results indicated that the TPI/PI blends maintained the curing behavior and characteristics of the PI oligomer. The T_g of the cured TPI/PI blend exceeded 395 °C, and the T_5% values were in the range of 533–563 °C, suggesting excellent thermal stability and heat resistance. The maximum impact strength was increased by 46% compared with that of pure PI, indicating the excellent toughening effect of the TPI. Carbon fiber-reinforced PI composites were prepared using the toughening system as a matrix. The compression-after-impact values of the carbon fiber-reinforced PI composites were up to 190 MPa, indicating the excellent toughness of the materials.     

Synthesis and properties of novel sulfonated (co)polyimides bearing sulfonated aromatic pendant groups for PEFC applications

Novel sulfonated diamines bearing aromatic pendant groups, namely, 3,5‐diamino‐3′‐sulfo‐4′‐(4‐sulfophenoxy) benzophenone (DASSPB) and 3,5‐diamino‐3′‐sulfo‐4′‐(2,4‐disulfophenoxy) benzophenone (DASDSPB), were successfully synthesized. Novel side‐chain‐type sulfonated (co)polyimides (SPIs) were synthesized from these two diamines, 1,4,5,8‐naphthalene tetracarboxylic dianhydride (NTDA) and nonsulfonated diamines such as 4,4′‐bis(3‐aminophenoxy) phenyl sulfone (BAPPS). Tough and transparent membranes of SPIs with ion exchange capacity of 1.5–2.9 meq g^?1 were prepared. They showed good solubility and high thermal stability up to 300 °C. They showed isotropic membrane swelling in water, which was different from the main‐chain‐type and sulfoalkoxy‐based side‐chain‐type SPIs. The relative humidity (RH) and temperature dependence of proton conductivity were examined. At low RH, the novel SPI membranes showed much higher conductivity than the sulfoalkoxy‐based SPIs. They showed comparable or even higher proton conductivity than Nafion 112 in water at 60 °C (>0.10 S cm^?1). The membrane of NTDA‐DASDSPB/BAPPS (1/1)‐s displayed reasonably high proton conductivities of 0.05 and 0.30 S cm^?1 at 50 and 100% RH, respectively, at 120 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2862–2872, 2006     

EC modified PEO/PVDF-LLZO composite electrolytes for solid state lithium metal batteries

The polymer-ceramic composite electrolytes have great application potential for next-generation solid state lithium batteries, as they have the merits to eliminate the problem of liquid organic electrolytes and enhancing chemical/electrochemical stability. However, polymer-ceramic composite electrolytes show poor ionic conductivity, which greatly hinders their practical applications. In this work, the addition of plasticizer ethylene carbonate (EC) into polymer-ceramic composite electrolyte for lithium batteries effectively promotes the ionic conductivity. A high ionic conductivity can be attained by adding 40 wt% EC to the polyethylene oxide (PEO)/polyvinylidene fluoride (PVDF)-Li₇La₃Zr₂O₁₂ (LLZO) based polymer-ceramic composite electrolytes, which is 2.64 × 10⁻⁴ S cm⁻¹ (tested at room temperature). Furthermore, the cell assembled with lithium metal anode, this composite electrolyte, and LiFePO₄ cathode can work more than 80 cycles at room temperature (tested at 0.2 C). The battery delivers a high reversible specific capacity after 89 cycles, which is 119 mAh g⁻¹.     

Liquid crystalline epoxies bearing biphenyl ether and aromatic ester mesogenic units: Synthesis and thermal properties

Two liquid crystalline epoxies containing biphenyl ether and aromatic ester mesogenic units, oxybis(4,1-phenylene)bis(4-(oxiran-2-ylmethoxy)benzoate)(LCE1) and oxybis(4,1-phenylene) bis(4-(4-(oxiran-2-yl)butoxy)benzoate)(LCE2), were synthesized and characterized. Subsequently, the epoxy monomers were cured with diaminodiphenylsulfone (DDS). From DSC, XRD and POM results, monomers did not show liquid crystalline phase while the cured samples exhibited nematic phase. The cured samples showed good mechanical properties with strength of 99.1MPa and excellent thermal stabilities with high glass transition temperature up to 168.0?°C, 5% weight loss temperature at 343?°C and high char yield of 24.5% at 800?°C. The relationship between thermal conductivity and network structure was discussed in this work. Due to the introduction of mesogenic units into epoxy networks, the cured resins showed high thermal conductivity as high as 0.292?W/(m*K), more than 1.5times higher than conventional epoxy resins. By introducing alumina (Al₂O₃) into LCE1/DDS cured system, composites of LCE1/DDS/Al₂O₃ with the highest thermal conductivity of 1.61?W/(m*K) was obtained with the content of 80?wt% while that of diglycidyl ether of bisphenol A (DGEBA, E51) epoxy resin/DDS/Al₂O₃ was 1.10?W/(m*K). The as-prepared epoxy resins showed high glass transition temperature and excellent thermal stabilities, indicating the potential of application in microelectronics.     

Improved properties of polymer electrolyte by ionic liquid PP1.3TFSI for secondary lithium ion battery

A new kind of polymer electrolyte is prepared from N-methyl-N-propylpiperidinium bis (trifluoromethanesulfonyl) imide (PP1.3TFSI), polyethylene oxide (PEO), and lithium bis (trifluoromethanesulfonyl) imide (LiTFSI). IR and X-ray diffraction results demonstrate that the addition of ionic liquid decreases the crystallization of PEO. Thermal and electrochemical properties have been tested for the solid polymer electrolytes, the addition of the room temperature molten salt PP1.3TFSI to the conventional P(EO)₂₀LiTFSI polymer electrolyte leads to the improvement of the thermal stability and the ionic conductivity (x = 1.27, 2.06 × 10⁻⁴ S cm⁻¹ at room temperature), and the reasonable lithium transference number is also obtained. The Li/LiFePO₄ cell using this polymer electrolyte shows promising reversible capacity, 120 mAh g⁻¹ at room temperature and 164 mAh g⁻¹ at 55 °C.     

A new promising high temperature lithium battery solid electrolyte

Lithium lanthanoid silicates find importance as a solid electrolyte in high temperature lithium batteries in view of its high ionic conductivity at high temperatures. An first ever attempt is made to synthesis a new high temperature solid electrolyte viz., lithium samarium holmium silicate by sol–gel process and it has been characterized by thermal analysis (TGA–DTA), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Lithium ion conductivity of 0.8087 × 10⁻⁷ Ω⁻¹ cm⁻¹ at 25 °C was obtained and it increases with increasing temperature. For the first time a highest conductivity of 0.1095 × 10⁻² Ω⁻¹ cm⁻¹ was obtained at 850 °C which is high compared to other high temperature lithium battery solid electrolytes.     

Polymerization-induced microphase separation of polymer-polyoxometalate nanocomposites for anhydrous solid state electrolytes

Solid-state electrolytes (SSEs) with high ionic conductivity, mechanical stability, and high thermal stability, as well as the stringent requirement of application in high-temperature fuel cells and lithium-ion batteries is receiving increasing attention. Polymer nanocomposites (PNCs), combining the advantages of inorganic materials with those of polymeric materials, offer numerous opportunities for SSEs design. In this work, we report a facile and general one-pot approach based on polymerization-induced microphase separation (PIMS) to generate PNCs with bi-continuous microphases. This synthetic strategy transforms a homogeneous liquid precursor consisting of polyoxometalates (POMs, H₃PW₁₂O₄₀, Li₇[V₁₅O₃₆(CO₃)]), poly(ethylene glycol) (PEG) macro-chain-transfer agent, styrene and divinylbenzene monomers, into a robust and transparent monolith. The resulting POMs are uniformly dispersed in the PEG block (PEG/POM) to form a conducting pathway that successfully realizes the effective transfer of protons and lithium ions, while the highly cross-linked polystyrene domains (P(S-co-DVB)) as mechanical support provide outstanding mechanical properties and thermal stability. As the POM loading ratio up to 35 wt%, the proton conductivity of nanocomposite reaches as high as 5.99 × 10^-4 S/cm at 100 °C in anhydrous environment, which effectively promotes proton transfer under extreme environments. This study broadens the application of fuel cells and lithium-ion batteries in extreme environments.     

Characterization and properties of ternary P(VdF-HFP)-LiTFSI-EMITFSI ionic liquid polymer electrolytes

Gel polymer electrolytes containing 1-ethyl-3-methylimidazolium-bis (trifluoromethyl-sulfnyl)imide (EMITFSI) ionic liquid were prepared for lithium ion batteries by solution casting method. Thermal and electrochemical properties have been determined for the gel polymer electrolytes. Proper addition of EMITFSI to the P(VdF-HFP)-LiTFSI polymer electrolyte improves the ionic conductivity and electrochemical window to 2.11 × 10⁻³ S cm⁻¹ (30 °C) and 4.6 V. In combination of the prepared ternary P(VdF-HFP)-LiTFSI-EMITFSI ionic liquid polymer electrolytes, Li₄Ti₅O₁₂ anode exhibited two extra voltage plateaus around 1.1 V and 2.3 V except the typical voltage plateau around 1.6 V by possible side reaction between ionic liquid and polymer. LiFePO₄ cathode exhibited high capacity above 140 mA h g⁻¹ and retention of 93.1% due to the suppressed polarization effect caused by enhanced ion transport properties. The high temperature of 80 °C didn't have significant impact on the cycling performance.     

Thermal analysis of polyurethane elastomers matrix with different chain extender contents for thermal conductive application

Polyurethane elastomers (PUR) based on polypropylene glycol and 4,4′-diphenylmethane diisocyanate were prepared with various monoethylene glycol (mEG) contents. The aim of this study is to find a reliable polymer matrix for composites of improved thermal conductivity and testing fully in order to collect knowledge about its structure. Thermal conductivity was improved from 0.255 to 0.329 W m^?1 K^?1 when increasing chain extender content. This attributed to a high appearance crystalline ordering level when adding high mEG content. Differential scanning calorimetry revealed a low transition temperature of soft segment at the same temperature around ??64 °C, due to constant polyol content. The enthalpy of melting increases with increasing mEG content. This is due to the increasing crystalline phase and hard segment phase separation within the PUR structure. Dynamic mechanical analysis results show the glass transition temperature of soft segment in the same temperature range between ??57 and ??52 °C and intensity peak of tanδ tends to decrease when mEG content was increased. On the other hand, the glass transition temperature of hard segment tends to increase from 10 to 93 °C and has high intensity peak of tanδ with increasing mEG content. Increasing the chain extender content can be enhancing the hard segment length in PUR structure and affecting both soft segment motion and hard segment motion. Increasing hard segment length might be obstructing soft segment motion and influence hard segment motion which is hard to move at low temperatures. Phase separation of soft and hard segment clearly observed using the DMA technique.

     

Mechanochemical synthesis and ionic conductivity of lanthanum phosphosilicate oxyapatites

Lanthanum phosphosilicate apatites with the chemical formula Sr_10–xLa_x(PO₄)_6–x(SiO₄)_xO, where 0 ≤ x ≤ 6, usually prepared by a solid-state reaction at about 1400 °C, were synthesized via the mechanochemical method at room temperature. The samples were characterized using powder X-ray diffraction, infrared spectroscopy and thermal analysis. The results showed that the prepared products were carbonated apatites and no secondary phase was detected. The realization of the milling under a controlled atmosphere can lead to oxyapatites containing no carbonates. The ionic conductivity of the Sr₆La₄(PO₄)₂(SiO₄)₄O sample was investigated by using impedance spectroscopy. The highest ionic conductivity value of 1.522 × 10⁻⁶ S·cm⁻¹ was found at 800 °C. In the investigated temperature range, the activation energy is of 0.85 eV.     

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

The cross-linking gel copolymer electrolytes containing alkyl acrylates, triethylene glycol dimethacrylate, and liquid electrolyte were prepared by in situ thermal polymerization. The gel polymer electrolytes containing 15 wt% polymer content and 85 wt% liquid electrolyte content with sufficient mechanical strength showed the high ionic conductivity around 5?×?10^?3 Scm^?1 at room temperature. The gel electrolytes containing different polymer matrices were prepared, and their physical observation and conductivity were discussed carefully. The cross-linking copolymer gel electrolytes of alkyl acrylates with other monomers were designed and synthesized. The results showed that copolymerization can improve the mechanical properties and ionic conductivities of the gel electrolytes. The polymer matrices of gels had excellent thermal stability and electrochemical stability. The scanning electron microscope analysis showed the gel electrolyte was the homogeneous structure, and the cross-linking polymer host was the porous three-dimensional network structure, which demonstrated the high conductivity of the gel electrolytes. The gel polymer Li-ion battery was prepared by this in situ thermal polymerization. The cell exhibited high charge-discharge efficiency at 0.1 C. The results of LiFePO4-PEA-Li cell and graphite-PEA-Li cell showed that gel polymer electrolytes have good compatibility with the battery electrodes materials.