Statistical investigations of the beam stability of the double-pass amplified zinc soft X-ray laser at 21.2 nm

At the Prague asterix laser system (PALS) of the Academy of Sciences of the Czech Republic the 1-TW asterix iodine laser is used as a pump source for soft X-ray laser experiments. The prepulse technique was applied which is known to enhance the X-ray laser output at the J=0-1 transition dramatically. Since Zn slab targets were used the laser wavelength was 21.2 nm. A prepulse beam having 1.6 J was preceding the main pulse by 10 ns. The main and the prepulse beam are focused by two different optical systems separately. Implementing a half-cavity set-up for double-pass amplification using a Mo/Si multilayer mirror the X-ray laser output was 10 times stronger than at single pass amplification in a 3-cm long plasma. Double-pass amplification was observed to be most efficient when the pump pulse duration was at least 120 ps longer than the round trip time in the half-cavity. Under this fundamental condition the X-ray laser reached saturation in the double-pass regime containing 4 mJ energy what is proved to be enough for applications. In this contribution the X-ray laser features like divergence in two dimensions, the beam quality (symmetry), the pointing angle and the time-integrated output energy are investigated over more than 100 shots. To characterize the stability of the X-ray laser the shot distribution, the mean value and the standard deviation for these parameters are evaluated. For 18 shots in a series -- achieved during one single day -- the corresponding values are given and detailed chi-squared tests characterize the Zn X-ray laser as a robust tool suitable for applications. At PALS soft X-ray laser beam time can be reserved for external research groups.Received: 16 April 2003, Published online: 5 August 2003PACS: 42.55.Vc X- and -ray lasers - 42.60.Da Resonators, cavities, amplifiers, arrays, and rings - 42.60.Jf Beam characteristics: profile, intensity, and power; spatial pattern formation     

抽运激光聚焦特性对预脉冲诱导的类氖J=0→1 X射线激光近场像的影响

研究了在最佳除焦、预脉冲光束单独散焦及主预脉 时散焦三种不同抽运激光聚焦条件下,预脉冲诱导的类氖铁和锌Ｊ＝０→１Ｘ射线激光的近场像。本实验是在Ａｓｔｅｒｉ ｉｖ磺激光装置上进行的,实验中主、预脉冲间的时间间隔为５ｎｓ。实验发现在抽运激光主、预脉冲最佳聚焦条件下,Ｘ射线激光束在２．５ｃｍ长的线状等离子体输出端沿靶面（垂直）方向分裂成两束;在抽运预脉冲单独散焦条件下,仍然观察到这一分裂现象;但是当抽运     

Prepulse dependence ofJ=0−1 lasing at 32.6 nm in neon-like titanium

The dependence of the intensity of the 3p—3s,J = 0–1 lasing line at 32.6 nm in neon-like titanium on the prepulse level has been investigated experimentally. Titanium slabs were irradiated with 1.315 µm/450 ps pulses from the Asterix IV iodine laser using a defined prepulse of 5.2 ns before the main pulse. It is found that for pump energies close to the minimum energy for which lasing is observed, a prepulse level of order 0.5% gives the highest XUV laser intensity, whereas a higher prepulse level, of order 10% and more, is required for optimum XUV lasing far above the threshold. For a 2.7 cm long titanium target lasing was observed down to a pump irradiance of 2.5 TW/cm² (50 J/450 ps) for the 0.5% prepulse.     

Relativistic electron beams detection in a dense plasma focus

Fast electron beams into a hollow anode of a small plasma focus machine (2 kJ, 4 μF) were measured. The diagnostic method designed for this purpose is founded in a small Rogowski coil introduced into a cavity performed in the anode. By means of this, electron beam pulses of about 10 ns width generated in the plasma focus are detected. Simultaneously, hard X-ray signals obtained from a scintillator-photomultiplier system are registered. The electron beam energy was measured through the time-of-flight of the electrons between probe and anode top. The beams are found to be relativistic and its energy is into the range of hard X-rays energy. An analysis of signal intensities and relative delays for three hundred shots are here presented. Received 28 February 2002 / Received in final form 7 May 2002 Published online 24 September 2002     

Control of the pulse duration in one- and two-axis passively Q-switched solid-state lasers

We study theoretically and experimentally different methods to control the pulses emitted by solid-state lasers passively Q-switched by a saturable absorber. We explore one- and two-axis laser schemes allowing to control the pulse duration, which is ruled by the saturation powers of the transitions in the absorber and in the gain medium. In one-axis lasers, it is shown that the adjustment of the pump and laser beam sizes in the active medium and in the absorber provides an efficient means to control the pulse temporal shape and duration. Furthermore, a two-axis laser cavity supporting so-called forked-eigenstate operation permits to freely adjust the parts of the mode power which circulate in the gain medium and in the absorber. In this case, a lengthening of the pulse duration up to 500 ns is obtained with an increase of the average output power. The theoretical results obtained by using rate equations adapted to each cavity geometry are in close agreement with experiments performed on a diode-pumped Nd³⁺:YAG laser Q-switched by a Cr⁴⁺:YAG saturable absorber. The relevance of the different techniques to control the pulse durations in the framework of potential applications is discussed. Received 3 December 2001     

基于双程放大的毛细管放电69.8 nm激光增益特性

建立了类氖氩C线69.8 nm激光的双程放大实验后反射腔结构,利用45 cm长毛细管作为放电负载得到了其双程放大输出.在相同初始实验条件下,分别测量了单程放大输出与双程放大输出的激光脉冲光强、脉冲宽度以及激光束散角.通过对比单程与双程输出实验结果,利用双程放大激光光强的计算公式,分析得到了增益持续时间大于4 ns,以及增益在毛细管径向上的分布特点.以上结果为建立谐振腔进行毛细管放电类氖氩激光的多程放大实验奠定了基础.     

Layout and performance of the Asterix IV iodine laser at MPQ,Garching

In this paper, the design procedure and the performance of the single beam Asterix IV high-power iodine laser emitting at = 1315 nm is described. It has been developed on the basis of a 10-years experience with the 1 TW Asterix III laser-system and with the support of a 1-D and a 3-D pulse propagation code. Special emphasis has been put on achieving a high overall system efficiency and a beam intensity profile as homogeneous as possible. Presently, Asterix IV provides output pulses with durations from 0.2 to several ns. At a duration of 0.4 ns, the pulse power is 3 TW and at a duration of 5 ns the pulse energy reaches 2.1 kJ. Under these conditions, the laser can be fired every twenty minutes.     

Capillary discharge soft X-ray laslng in Ne-like Ar pumped by long current pulses

A capillary discharge soft X-ray laser operating at 46.9 nm on the transition 3p-3s (J = 0-1) of the Ne-like Ar has been realized by exciting the active medium with a long half-cycle duration current pulse of 140 ns. The current is produced by discharging a 10 nF water dielectric capacitor, initially charged to voltages lower than 200 kV by a six stage Marx generator, through a 15-cm long capillary channels. The laser amplification has been obtained by properly adjusting all the other experimental parameters. Utilizing a 3-mm in diameter Al₂O₃ capillary channel initially filled with 0.3 torr of Ar pressure, a laser beam, which has a 4-mrad divergence and a time duration of 1.3 ns, is characterized by a gain of 0.6±0.1 cm^-1. The stability of the plasma compression followed by the laser emission is verified. Received 13 December 2001     

反射镜双程放大对类氖锗软X射线激光的输出影响研究

纳秒量级激光驱动的类氖锗软X射线激光具有出光稳定和输出强度大等优点,在诸多领域拥有很好的应用价值. 研究了通过在光路中增加一块多层膜反射镜实现双程放大对出光特性的影响. 通过估算和实验,证实了增加反射镜双程放大确实能够提高类氖锗软X射线激光的输出强度,对于24mm的双程放大长度,总输出强度会增加约2.3倍. 但同时这种模式也带来了光束质量的下降,对应用研究并非完全有益. 关键词： 软X射线激光 反射镜双程放大 增益饱和     

PbS-doped phosphate glasses saturable absorbers for 1.3-μm neodymium lasers

Passive mode locking and saturable absorber Q-switching of neodymium lasers at 1.3 μm with PbS-doped phosphate glasses are demonstrated. Q-switched pulses of 120 ns (0.1 μJ) in duration (energy) and the average output power of 3 mW from a quasi-cw diode-pumped Nd³⁺:KGW laser and ultrashort pulses of a maximum of 250 μJ in energy and 150 ps in duration from a Nd³⁺:YAP laser were obtained. The bleaching decay rate of the samples was found to increase with the Quantum Dot’s size decreasing due to the enhancement of quantum confinement effects for smaller dots and stronger overlapping of the electron and trap state wave functions. Received: 23 January 2002 / Revised version: 2 April 2002 / Published online: 20 December 2002 RID="*" ID="*"Corresponding author. Fax: +375-17/232-6286, E-mail: savitski@eudoramail.com     

Plasma-based X-ray laser at 21 nm for multidisciplinary applications

An overview of recent advances in applications of currently the most energetic X-ray laser at 21 nm is given. The unique parameters of this half-cavity based X-ray laser such as record output energy of 10 mJ, highly symmetric beam, robustness and reproducibility, have made it possible to carry out a number of multidisciplinary scientific projects featuring novel applications of intense coherent X-ray radiation. Selected results obtained in these experiments are reviewed, including X-ray laser probing of dense plasmas, measurements of transmission of focused soft X-ray radiation at intensities of up to 10¹² W cm^-2, measurements of infrared laser ablation rates of thin foils, and ablative microstructuring of solids.     

Effects of a prepulse on laser-induced EUV radiation conversion efficiency

The influence of prepulses on the conversion efficiency (CE) of laser radiation into 13 nm extreme ultraviolet (EUV) radiation, resulting from lithium-like oxygen ions from O20 μm water droplets, was investigated. The laser pulse durations in the experiment ranged from 200 fs to 120 ps. Applying prepulses preceding the main pulse at various delays of up to 11 ns, it was shown that the CE increases differently for each measured pulse duration. The strongest dependence on the introduction of a prepulse was observed for 2 ps laser pulses with a 20 mJ laser pulse energy. The EUV CE was improved by a factor of 15 by the introduction of a prepulse. Calculations on the atomic physics of oxygen ions and simulations of the laser–plasma interaction revealed the influence of the prepulse on the EUV yield. Received: 25 October 2002 / Published online: 22 January 2003 RID="*" ID="*"Corresponding author. Fax: +49-3641/947-202, E-mail: duesterer@ioq.uni-jena.de     

Table-top KrF amplifier delivering 270 fs output pulses with over 9 W average power at 300 Hz

Applying the combination of a solid-state Ti:Sa laser system and a newly developed wide-aperture, discharge-pumped KrF amplifier, output pulses with over 9 W average power at 300 Hz have been achieved in a single output beam. The frequency-tripled seed pulses of the Ti:Sa system – delivering approximately 10 μJ energy at 248 nm – were amplified to over 30 mJ using a 3-pass off-axis amplification scheme. The optical set-up has been fitted to the amplifier’s parameters, and stored-energy measurements were carried out with different parameters in order to optimize the operational conditions of the device for the highest average power. Received: 10 June 2002 / Published online: 25 September 2002 RID="*" ID="*"Corresponding author. Fax: +49-551/503-599, E-mail: jbekesi@llg.gwdg.de     

100-W average-power, high-energy nanosecond fiber amplifier

We report on the fiber-based amplification of a Q-switched Nd:YAG thin-disk laser. At repetition rates between 3 and 50 kHz output powers up to 100 W are generated. Pulse energies up to 4 mJ, with diffraction-limited beam quality, are generated in a 30-μm Yb-doped large-mode-area fiber, furthermore pulse energies up to 8 mJ are achieved from a multimode fiber amplifier. Received: 8 May 2002 / Revised version: 10 July 2002 / Published online: 25 October 2002 RID="*" ID="*"Corresponding author. Fax: +49-3641/65-7680, E-mail: Jens.Limpert@uni-jena.de     

Development of a nearly transform-limited, low-repetition-rate, picosecond optical parametric generator

A low-repetition-rate (10-Hz), picosecond (ps) optical parametric generator (OPG) seeded at the idler wavelength with a high-power diode laser is demonstrated. The output of the OPG at ∼566 nm is amplified in dye cells, resulting in signal enhancement by more than three orders of magnitude. The nearly transform-limited beam at ∼566 nm has a pulsewidth of ∼170 ps, with an overall output of ∼2.3 mJ/pulse. The laser is tuned either by tuning the nonlinear crystal or the seed-laser current. The applications of such a simple, compact, high-performance, tunable ps laser system for linear and nonlinear spectroscopies are outlined.     

Efficient amplification of sub-picosecond pulses of a non-CW dye laser

Efficient amplification in a dye laser amplifier is investigated theoretically and experimentally. A five-level rate equation approach is considered including rotational relaxation of the dye molecules. The effects of the pump pulse duration and of the parameters of the input pulse are discussed. The results are compared with experimental data for 0.5 ps pulses of a pulsed dye laser. Conversion efficiencies >10% are achieved for a single pass amplifier using Nd:YAG pump pulses of 2 ns while an effective fluorescence lifetime of 1.7±0.2 ns is determined for the gain medium rhodamine 6G. The triple pass amplifier stage of the laser system achieves an energy conversion of 4% with 40 J output pulses.     

Compact diode-side-pumped Nd:YVO<Subscript>4</Subscript> laser in grazing-incidence configuration

The analysis of compact CW diode-side-pumped grazing-incidence-geometry Nd:YVO₄ laser designs is presented. An output power of 5 W (λ=1064 nm) was produced at 17 W of diode pump (conversion efficiency of 30%) in single transverse TEM₀₀ mode operation at high laser beam quality (M_x ²≈1.05 and M_y ²≈1.01). The resonator geometry was analyzed by applying generalized 4×4 matrix modeling of the spatial mode size, including the impact on the laser operation of cavity astigmatism and a thermal lens in the laser slab. The simplicity and compactness of the laser cavities allow their use for technological applications. Received: 31 July 2002 / Published online: 22 January 2003 RID="*" ID="*"Corresponding author. Fax: +44-20/7594-7744, E-mail: m.damzen@ic.ac.uk     

Nonlinear optical characterization of cluster dynamic in water in oil microemulsion by a pump probe laser beam technique

We present a new pump probe laser beams configuration for the nonlinear optical characterization of microemulsions. We detect the variation of the on-axis optical intensity of the probe beam as generated by the concentration profile induced in an optically thin film of microemulsion by the pump beam. A mathematical model has been introduced to describe the phenomenon. The technique allows the determination of both Kerr-like optical nonlinearity and time constants and, therefore, it gives information both on cluster dimension and their shape. We discuss its application to WAD (water/AOT/decane, where AOT denotes sodium-bis-di-ethyl-sulfosuccinate) with the application of a strong electric field of optical source. Comparison between theoretical predictions and experimental results confirms the presence of giant optical nonlinearity in the absence of turbidity divergence. Chainlike shape of clusters, of the kind already reported with the application of strong electric field, could justify this result. Received 26 October 2002 RID="a" ID="a"e-mail: vicari@na.infn.it     

Multimode squeezed states produced by a confocal parametric oscillator

We investigate the spatial behaviour of the quantum-noise-reduction spectrum of the vacuum state emitted by a degenerate optical parametric oscillator below threshold. In view of possible experimental implementations, we consider a mode-degenerate resonator and two matching lenses and show that, for the realistic case of a finite-width pump, significant level of squeezing can be observed in a very small region of the beam. Received 25 September 2002 Published online 11 February 2003     

Efficient J=0-1 soft-X-ray lasing in neon-like ions at pump powers below 250 GW

2 . By using a 0.7% prepulse that precedes the main pulse by 5 ns and applying a total pump energy of 100 J or less, the J=0-1 lasing is at least one order of magnitude higher than the non-lasing background. For the 32.6-nm line of Ti, the 25.5-nm line of Fe, and the 23.1-nm line of Ni, gain coefficients of (±) 4.20.4cm^-1, (±) 3.90.3cm^-1, and (±) 3.60.6cm^-1, respectively, were measured for 2.4-cm-long curved targets, resulting in gain–length products of ∼10. Angle-resolved spectra indicate a beam divergence of 3 mrad (FWHM), typically. The space-resolved spectra show that the J=0-1 lasing lines are emitted from an approximately 60-μm-wide (FWHM) plasma region, whereas the nearby continuum emission is produced in a considerably broader plasma region of ∼250 μm. Lasing at 25.5 nm in neon-like iron was observed at a pump power as low as 180 GW (∼9 TW/cm²), with, however, considerable shot-to-shot scatter in the absolute laser output. Received: 5 September 1997/Revised version: 10 November 1997