Poly(3-hydroxyalkanoate)-derived amphiphilic graft copolymers for the design of polymersomes

Amphiphilic graft copolymers composed of biocompatible bacterial poly(3-hydroxyalkanoate) and poly(ethylene glycol) have been synthesized by thiol-ene addition. They were demonstrated to form well-defined nanoscale vesicles in water by cryo-transmission electron microscopy.     

Block copolymers prepared by emulsion polymerization with poly(ethylene oxide)–azo-initiators

Poly(ethylene oxide)-b-poly(styrene) block copolymers were prepared in the form of latex particles by emulsion polymerization of styrene with poly(ethylene glycol)–azo-initiators as well as with the redox initiation system poly(ethylene glycol)/Ce⁴⁺. The emulsion polymerization can be carried out in the absence of additional stabilizers if the chain length of the poly(ethylene glycol) is greater than 40. The latex particles as well as the copolymers were characterized by capillary hydrodynamic fractionation, ¹³C-nuclear magnetic resonance (NMR) spectroscopy and Fourier transform infrared spectroscopy. By ¹³C-NMR spectroscopy a side reaction of the primary radicals arising from the azo-initiator was found which can contribute to the low efficiency of azo-initiators in emulsion polymerization.     

Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

A convenient synthesis of α,α′‐ homo‐ and α,α′‐hetero‐bifunctionalized poly(ε‐caprolactone)s by ring opening polymerization: The potentially valuable precursors for miktoarm star copolymers

Two new ring opening polymerization (ROP) initiators, namely, (3‐allyl‐2‐(allyloxy)phenyl)methanol and (3‐allyl‐2‐(prop‐2‐yn‐1‐yloxy)phenyl)methanol each containing two reactive functionalities viz. allyl, allyloxy and allyl, propargyloxy, respectively, were synthesized from 3‐allylsalicyaldehyde as a starting material. Well defined α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy bifunctionalized poly(ε‐caprolactone)s with molecular weights in the range 4200–9500 and 3600–10,900 g/mol and molecular weight distributions in the range 1.16–1.18 and 1.15–1.16, respectively, were synthesized by ROP of ε‐caprolactone employing these initiators. The presence of α‐allyl, α′‐allyloxy and α‐allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone)s was confirmed by FT‐IR, ¹H, ¹³C NMR spectroscopy, and MALDI‐TOF analysis. The kinetic study of ROP of ε‐caprolactone with both the initiators revealed the pseudo first order kinetics with respect to ε‐caprolactone consumption and controlled behavior of polymerization reactions. The usefulness of α‐allyl, α′‐allyloxy functionalities on poly(ε‐caprolactone) was demonstrated by performing the thiol‐ene reaction with poly(ethylene glycol) thiol to obtain (mPEG)₂‐PCL miktoarm star copolymer. α‐Allyl, α′‐propargyloxy functionalities on poly(ε‐caprolactone) were utilized in orthogonal reactions i.e copper catalyzed alkyne‐azide click (CuAAC) with azido functionalized poly(N‐isopropylacrylamide) followed by thiol‐ene reaction with poly(ethylene glycol) thiol to synthesize PCL‐PNIPAAm‐mPEG miktoarm star terpolymer. The preliminary characterization of A₂B and ABC miktoarm star copolymers was carried out by ¹H NMR spectroscopy and gel permeation chromatography (GPC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 844–860     

Quadruple click reactions for the synthesis of cysteine‐terminated linear multiblock copolymers

Synthesis of cysteine‐terminated linear polystyrene (PS)‐b‐poly(ε‐caprolactone) (PCL)‐b‐poly(methyl methacrylate) (PMMA)/or poly(tert‐butyl acrylate)(PtBA)‐b‐poly(ethylene glycol) (PEG) copolymers was carried out using sequential quadruple click reactions including thiol‐ene, copper‐catalyzed azide–alkyne cycloaddition (CuAAC), Diels–Alder, and nitroxide radical coupling (NRC) reactions. N‐acetyl‐L ‐cysteine methyl ester was first clicked with α‐allyl‐ω‐azide‐terminated PS via thiol‐ene reaction to create α‐cysteine‐ω‐azide‐terminated PS. Subsequent CuAAC reaction with PCL, followed by the introduction of the PMMA/or PtBA and PEG blocks via Diels–Alder and NRC, respectively, yielded final cysteine‐terminated multiblock copolymers. By ¹H NMR spectroscopy, the DP_ns of the blocks in the final multiblock copolymers were found to be close to those of the related polymer precursors, indicating that highly efficient click reactions occurred for polymer–polymer coupling. Successful quadruple click reactions were also confirmed by gel permeation chromatography. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Study on ketalization reaction of poly(vinyl alcohol) by ketones. IX. Kinetic study on acetalization and ketalization reaction of 1,3-butanediol as a model compound for poly(vinyl alcohol)

A kinetic study was carried out on the acetalization reaction of 1,3-butanediol, as a model compound for poly(vinyl alcohol) (PVA), in water, under acidic conditions. Since these equilibrium constants of ketalization reaction of 1,3-butanediol and ethylene glycol are so small, the kinetic parameters were estimated from the hydrolysis reactions of the corresponding ketals. It was made clear that these reactions proceed in the reversible bimolecular reaction, and the heat of reaction and activation energy are nearly equal to that of PVA. The rate constants of hydrolysis reaction (k′s) of model compounds were calculated on the basis of value of acetone ketal, Hammett-Taft's equation log k′s/k′so – 0.54(n – 6) = ρ^*σ^* was established, and the value of ρ^* was obtained (3.60), which coincided with the value of PVA. Therefore, it was made clear that the hydrolysis reactions of acetals and ketals are electrophilic reaction (SE II reaction) and the step of rate determination is the formation of hemiacetal and hemiketal. The rate constants of hydrolysis reaction of 1,3-butanediol acetals and ketals were approximately 10–20 larger, and those of ethylene glycol were approximetly 50–80 larger except for ketals, and those of ethanol were roughly 2000–10,000 larger compared with that of high-molecular weight compound (PVA). It can be well explained that these differences in the rate constant depend on their entropy and the mobility of molecules. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1719–1931, 1997     

The stability of semi-interpenetrating polymer networks based on sulfonated polyimide and poly(ethylene glycol) diacrylate for fuel cell applications

A series of the semi-interpenetrating polymer network (semi-IPN) membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and characterized comparing with pure sulfonated polyimide membrane and commercially available membrane, Nafion^® 117. The proton conductivity increased with the increase of poly(ethylene glycol) diacrylate contents in spite of the decrease in ion exchange capacity which is a key factor to improve the proton conductivity. The water stability of semi-IPN membranes containing poly(ethylene glycol) diacrylate is higher than the pure sulfonated polyimide membrane. Morphological structure showed that amorphous nature of the films also increased with the poly(ethylene glycol) diacrylate contents, which could make a crosslink, so that the crystallinity of polyimide could disappear. Semi-IPN membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate, which show good conductivity comparable to Nafion^® 117 in the range of 20-50% content of poly(ethylene glycol) diacrylate, could be promising proton conducting membranes in fuel cell application.     

Polymeric networks by the cationic crosslinking reaction of poly(allenyl ether)s having oligo(oxyethylene) moieties in the side chain

Cationic crosslinking reactions of poly(allenyl ether)s having oligo(oxyethylene) moieties prepared by the radical polymerization of the corresponding allenyl ethers were carried out under some varied reaction conditions. For instance, a crosslinked polymer was obtained in 82% yield by the treatment of poly(ethylene glycol methyl allenyl ether) ( 1a ) with 1.2 mol% of BF₃·OEt₂ ( 2 ) under high concentration in dichloromethane (46 wt %). The gels obtained showed good swelling properties in water, alcohols, and polar organic solvents such as dichloromethane. In particular, the degrees of swelling of these gels in aqueous sodium chloride (1M) were quite similar to those in ion-free water, indicating that these gels served as nonionic hydrogels. © 1994 John Wiley & Sons, Inc.     

Addition of polyglycol to old culture of Phanerochaete chrysosporium

Polyglycols increased lignin peroxidase activity in shaken cultures of Phanerochaete chrysosporium even when they were added to an old fungus (5 or 10 d after inoculation). The effects depended on the polyglycol mol wts (10²–10⁶ Daltons) as well as on the backbone structure (i.e., poly[ethylene glycol], poly[butylene glycol], poly[propylene glycol]) and terminal groups (i.e., poly[ethylene glycol], poly[ethylene glycol] methyl ether, poly[ethylene glycol] dimenthyl ether). The residual quantity of polyglycol in the biomass and in the culture filtrate also varied among different polyglycols. The polyglycols act after being adsorbed to the cell membrane exaggerating the asymmetry of the membrane environment. In old fungus, the incompatibility of polyglycols and glycans decreases the adsorption and the effect of high mol wtpolyglycols.     

Fiber-optic sensor for carbon dioxide with a ph indicator dispersed in a poly(ethylene glycol) membrane

A fiber-optic sensor for carbon dioxide gas is constructed, without an inner buffer solution, by using a dispersion of fluorescein in poly(ethylene glycol) deposited on the distal end of an optical fiber. Evaporation of the solvent is thus negligible. The response range is 0–28% (v/v) for carbon dioxide, with a detection limit of 0.1%. The response time achieved is 10 s. The membrane (ca. 10 μm thick) is composed of poly(ethylene glycol)s with molecular weights of 200 and 1540 dalton in a 20:80% (w/w) ratio. The best concentration of fluorescein is 5 × 10^?7 mol g^?1 of poly(ethylene glycol). The response mechanism of the sensor is discussed.     

Synthesis of a triblock copolymer: Poly(ethylene glycol)‐poly(alkylene phosphate)‐poly(ethylene glycol) as a modifier of CaCO3 crystallization

Triblock copolymer poly(ethylene glycol)‐poly(alkylene phosphate)‐poly(ethylene glycol) was prepared by first reacting hexamethylene glycol with dimethyl‐H‐phosphonate at conditions of transesterification and then replacing the CH₃OP(O)(H)O‐… end‐groups by monomethyl ether of poly(ethylene glycol). The course of reaction was studied by ³¹P NMR indicating complete conversion. After oxidation the poly(alkylene H‐phosphonate was converted into the final triblock polyphosphate. This triblock copolymer was used as a modifier of CaCO₃ crystallization. Unusual semi open empty spheres resulted, composed of small crystallites of the size (diameter) equal to 40–90 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 650–657, 2005     

A poly(ethylene glycol)-supported quaternary ammonium salt: An efficient, recoverable, and recyclable phase-transfer catalyst

A quaternary ammonium salt readily immobilized on a soluble poly(ethylene glycol) polymer support efficiently catalyzes different reactions carried out under phase-transfer catalysis conditions; the catalyst, easily recovered by precipitation and filtration, shows no appreciable loss of activity when recycled three times.     

Microwave‐Assisted Single‐Step Synthesis of Poly(alkylene hydrogen phosphonate)s by Transesterification of Dimethyl Hydrogen Phosphonate with Poly(ethylene glycol)

Summary: Poly(alkylene hydrogen phosphonate)s with a number‐average molecular weight of about 3 000 Da were obtained by a transesterification of dimethyl hydrogen phosphonate with poly(ethylene glycol) (PEG 400) under microwave irradiation with a very short reaction time (55 min) relative to that of classical thermal heating (9 h). The structure of the resulting polymer was confirmed by ¹H, ³¹P, and ¹³C NMR spectroscopy. The molecular weight was determined by ¹H, ³¹P{H} NMR spectroscopy, MALDI‐TOF, and GPC.

The transesterification of dimethyl hydrogen phosphonate with poly(ethylene glycol).     

Vinyl ether end‐groups in poly(ethylene glycol)s from the Na2CO3‐promoted degradation of 1,3‐dioxolan‐2‐one polymers

The Na₂CO₃‐promoted polymerization of 1,3‐dioxolan‐2‐one (I) to afford poly(ethylene glycol) III was reinvestigated. The reaction appeared to involve a nucleophilic attack against the carbonyl and methylene groups of I to afford poly(carbonate) II with poly(ethylene glycol) linkages and ethylene oxide IV as a side product (10–22%). As the reaction progressed, poly(carbonate) II decreased and poly(ethylene glycol) III increased. Under some conditions, poly(ethylene glycol)s V and VI with vinyl ether terminal groups were formed unexpectedly. The formation of unsaturated products during the polymerization of I/EO (ethylene oxide) has not been reported in the literature. We believe that vinyl ethers were formed from the degradation of poly(carbonate)s and were accompanied by a reduction in molecular weight. The structures of vinyl ethers V and VI were confirmed by hydrogenation of the double bond into the ethyl ether group in VII and VIII, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 152–160, 2000     

Poly (caprolactone)/poly (ethylene glycol) pervaporation blend membranes: Synthesis,characterization, and performance

Poly (caprolactone) membranes with addition of different poly (ethylene glycol) concentrations were prepared for separation of water/isopropanol azeotropic mixture by pervaporation process. Different characterization tests including Fourier transform infrared, scanning electron microscopy, water contact angle, and thermogravimetric analysis were carried out on the prepared membranes. In addition, the effect of poly (ethylene glycol) PEG content on the swelling degree and the performance of the prepared membranes in pervaporation process were investigated. According to the obtained results, all the membranes were water selective and the blend membrane containing 3 wt% PEG exhibited the best pervaporation performance with a water flux of 0.517 kg/m² hour and separation factor of 1642 at the ambient temperature. Hydrophilicity improvement of the blend membranes was confirmed by constant decrease in water contact angle of the membranes as PEG content increased in the casting solution. Scanning electron microscopy cross‐sectional images indicated that the blend membranes containing PEG had a closed cellular structure. Furthermore, mechanical and thermal properties of the membranes decreased by adding PEG.     

Synthesis and characterization of novel degradable photocrosslinked poly(ether‐anhydride) networks

New degradable poly(ether‐anhydride) networks were synthesized by UV photopolymerization. Dicarboxylated poly(ethylene glycol) (PEG) or poly(tetramethylene glycol) (PTMG) was reacted with an excess of methacrylic anhydride to form dimethacrylated macromers containing anhydride linkages. The percent of conversion for the macromer formation was more than 80% at 60 °C after 24 h. ¹H NMR and IR spectroscopies show the presence of anhydride linkages in the macromer. In vitro degradation studies were carried out at 37 °C in PBS with crosslinked polymer networks formed by UV irradiation. All PEG‐based polymers degraded within 2 days, while PTMG‐based polymers degraded by 50% of the initial weight after 14 days. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1277–1282, 2000     

Preparation of new poly(ester triazole) and poly(amide triazole) by “click chemistry”

New dialkynyl monomers containing furan and ester or amide units were prepared via three step reactions from ethyl furan-2-carboxylate. Their click polymerization with either poly(ethylene glycol) diazide or poly(tetrahydrofuran) diazide catalyzed by Cu(I) led to corresponding amorphous poly(ester triazole) and poly(amide triazole) with molecular weights in the range of (7–11) × 10³ and with glass transition temperatures in the range of ?35 and ?19°C. The temperature at 5% wt loss (T ₁₀), determined from TGA of polyazomethines were in the range 345–365°C indicating their good thermal stability.     

Aqueous solution properties of amphiphilic triblock copolymer poly(p-dioxanone-co-l-lactide)-block-poly(ethylene glycol)

A poly(ethylene glycol) (PEG)-based new amphiphilic block copolymer bearing the poly(p-dioxanone-co-l-lactide) (PPDO/PLLA) hydrophobic moieties was prepared. Depending on the copolymer composition and molecular weights, solubility of the polymeric samples in water was varied. Its diluted aqueous solution properties were studied by viscometry, dye solubilization, ¹H-NMR and dynamic light scattering. 1,6-Diphenyl-1,3,5-hexatriene solubilization and ¹H-NMR spectra carried out in CDCl₃ and D₂O were used to prove the existence of hydrophobic domains as the core of micelle. Average particle size of 60-165 nm with low polydispersity and lower negative zeta (ξ) potential of −3 to −14 mV were observed on the aqueous copolymer dispersion.     

Consecutive palladium-catalyzed Hiyama-Heck reactions in aqueous media under ligand-free conditions

Symmetric and asymmetric (E)-1,2-diarylethenes are synthesized from aryl bromides by consecutive one-pot Hiyama-Heck reactions carried out in water and under air; the only additives required are sodium hydroxide, palladium acetate and poly(ethylene glycol), and the products are isolable in many cases by simple filtration of the water solution.