Single-walled carbon nanotube-arrayed microelectrode chip for electrochemical analysis

The development of a single-walled carbon nanotube (SWCNT)-arrayed microelectrode chip is reported here. SWCNT-arrayed electrodes were formed directly on Pt surfaces, and were also arrayed on the chip. The electrochemical characteristics of the devices were investigated using potassium ferricyanide, K₃[Fe(CN)₆] in connection with cyclic voltammetry (CV). The electrochemical signals of electro-active amino acids; L-Tyrosine (Tyr), L-Cysteine (Cys) and L-Tryptophan (Trp) were detected using differential pulse voltammetry (DPV). The chip operated at a lower oxidation potential (vs. Ag/AgCl) compared with conventional carbon and Pt disc electrodes in 50 mM phosphate buffer solution (PBS, pH 7.4). The linear response was observed between 0.1–1 μM and 100 μM for the amino acids with correlation coefficients higher than 0.99. The electrochemical measurements of K₃[Fe(CN)₆] and amino acids revealed that the peak current intensities using SWCNT-arrayed electrodes were about 100-fold higher than those using bare Pt-arrayed microelectrodes. Additionally, the surface area dependence of the peak current responses was plotted. We concluded that our chips with SWCNT-arrayed microelectrodes provided a promising platform for electrochemical applications.     

Investigation of the dynamics of radiolytic formation of ZnO nanostructured materials by pulse radiolysis

ZnO nanostructures have been synthesized by radiolytic methods. A Cobalt-60 γ-source and a 7 MeV linear electron accelerator (LINAC) was used for the radiolysis experiments. Reducing agent like hydrated electron (e_aq⁻), which is produced in radiolysis of water, was used to synthesize ZnO nanostructure materials from zinc salt. 1 M tert-butanol was used to quench the primary oxidizing radical like hydroxyl radical (OH) radiolytic water solution. Doses of about 80–130 kGy were used to perform radiolysis experiments in the present investigation. Time-resolved pulse radiolysis has been used to monitor the transient species involved in the formation of ZnO nanostructures by monitoring at different wavelengths. A scheme for the formation of the ZnO nanostructured materials by the radiolytic method has been described. The formation of ZnO nanostructures was confirmed by X-ray diffraction (XRD) measurements. Dynamic light scattering (DLS) measurements indicated that the size of the nanostructures is in the range of 6–8 nm, which is in agreement with that obtained from XRD. It is interesting to note that ZnO nanostructured materials, as prepared by the radiolytic method, exhibit strong room-temperature fluorescence.     

Novel inorganic ionic compounds based on Re6 chalcocyanide cluster complexes: synthesis and crystal structures of [CuNH3(trien)]2[Re6S8(CN)6] · 7H2O, [CuNH3(trien)]2[Re6Se8(CN)6] and [CuNH3(trien)]2[Re6Te8(CN)6] · H2O

Three new octahedral rhenium chalcocyanide cluster compounds [CuNH₃(trien)]₂[Re₆S₈(CN)₆] · 7H₂O (1), [CuNH₃(trien)]₂[Re₆Se₈(CN)₆] (2) and [CuNH₃(trien)]₂[Re₆Te₈(CN)₆] · H₂O (3) exhibiting ionic structures have been obtained by the diffusion of an ammonia solution of KCs₃[Re₆S₈(CN)₆] (for 1), K₄[Re₆Se₈(CN)₆] · 3.5H₂O (for 2) or Cs₄[Re₆Te₈(CN)₆] · 2H₂O (for 3) into a glycerol solution of CuCl₂ · 2H₂O in the presence of trien (trien=triethylenetetramine). The compounds have been characterized by single-crystal X-ray diffraction. All three compounds contain a cationic complex [CuNH₃(trien)]²⁺ which was not described previously.     

EDL structure and peculiarities of ferricyanide cyclic voltammetry for silver deposits on gold

The evolution of electrochemical characteristics of a gold electrode upon the deposition of one and more atomic silver layers was studied by means of cyclic voltammetry and the method of potential temperature jump induced by the laser irradiation. Characteristics of the electric double layer on Ag monolayer are determined to be close to those of a massive silver electrode. Meanwhile, the electron-transfer parameters for the model redox system Fe(CN)₆^{3 −/4 −} correspond to a gold electrode. The silver beyond the first atomic layer in multilayer deposits was shown to transform into Ag hexacyanoferrate (II) due to the spontaneous chemical reaction with K₃Fe(CN)₆ from the solution. For the Fe(CN)₆^{3 −/4 −} redox system, the difference between oxidation and reduction peak potentials on a cyclic voltammogram increases with the growth of the silver layers number. This effect results from the corresponding increase in the ohmic resistance of the silver hexacyanoferrate (II) film and is not attributed to the changes in the electron-transfer kinetics.     

Cyclic voltammetric studies of carbohydrate–protein interactions on gold surface

A simple electrochemical method for the determination of association constants between carbohydrates and carbohydrate-binding proteins using cyclic voltammetry (CV) is described. The binding of concanavalin A (Con A) and cholera toxin (CT) to their specific α-mannose and β-galactose derivatives self-assembled on gold electrodes is electrochemically monitored with a redox probe of K₃Fe(CN)₆/K₄Fe(CN)₆. Upon binding of the proteins to the carbohydrate-modified electrodes, the redox current in CV decreases. The binding-induced change in electrochemical signal is thus used to construct Langmuir adsorption isotherm for the carbohydrate–protein interactions and to obtain the association constants. The association constants of carbohydrate–protein interactions determined by CV ((5.8 ± 1.2) × 10⁷ M^− 1 for mannose–Con A, (2.6 ± 0.5) × 10⁸ M^− 1 for galactose-CT) were in good agreement with those measured with electrochemical impedance spectroscopy and quartz crystal microbalance.     

Heptanuclear high-spin complex compounds based on S-donors

The precursors [Fe(III)(^SYL)Cl] (^SYLH₂) = N,N′-bis(1-hydroxy-Y-2-benzyliden)-1,6-diamino-3-thiohexane, (Y = H, 3EtO, 5Me) are high-spin (S = 5/2) complexes. The precursors are combined with [Fe(II)(CN)₆]⁴⁻ and [Co(III)(CN)₆]³⁻ to yield star-shaped heptanuclear clusters, [Fe(II)(CN–Fe(III)^SYL)₆]Cl₂ and [Co(III)(CN–Fe(III)^SYL)₆]Cl₃. The star-shaped compounds are high-spin (HS) systems at room temperature. On cooling to 20 K some of the iron(III) centers perform some HS–HS transition.     

Electrochemical and thermodynamic properties of hexacyanoferrate(II)/(III) redox system on multi-walled carbon nanotubes

Novel films consist of multi-walled carbon nanotubes (MWCNT) were fabricated by means of catalytic chemical vapor deposition (CVD) technique with decomposition of either acetonitrile (ACN) or benzene (BZ) using ferrocene (FeCp₂) as catalyst. The electrochemical and thermodynamic behavior of the ferrocyanide/ferricyanide, [Fe(CN)₆]^3−/4− redox couple on synthesized MWCNT-based films was investigated by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques at T = (278.15, 283.15, 293.15, and 303.15) K. The redox couple [Fe(CN)₆]^3−/4− behaves quasi-reversibly on fabricated MWCNT-based films and its reversibility is enhanced upon increasing temperature. Namely, the findings establish that with the rise in temperature the barrier for interfacial electron transfer decreases, leading, consequently, to an enhancement of the kinetics of the charge transfer process. According to thermodynamics the equilibrium of the redox process is shifted towards the formation of [Fe(CN)₆]³⁻ at elevated temperatures.     

The electrochemical reduction of carbon dioxide (CO2) to methanol in the presence of pyridoxine (vitamin B6)

Experiments aimed at ameliorating carbon dioxide (CO₂) into methanol were explored using pyridoxine, a member of the vitamin B₆ family, to enhance the reduction process. At a platinum electrode, an aqueous solution (pH ≈ 5) of pyridoxine showed a quasi-reversible redox couple with the cathodic peak detected at ca. − 0.55 V vs. Ag/AgCl (3 M KCl) in the presence of CO₂ and argon. An increase in the corresponding cathodic peak current was observed following saturation of the solution with CO₂ using a Pt electrode, but with no detectable reduction current recorded at a glassy carbon electrode for the same system. Confirmation of methanol formation during the pyridoxine-assisted CO₂ reduction was conducted by using gas chromatography analysis of the electrolyzed solutions and faradic yields of ca. 5% were afforded. A combination of the results from the cyclic voltammetry and constant current chronopotentiometry experiments revealed an overpotential of ≤ 200 mV was required. The results indicate a potential utility of pyridoxine as an alternative reagent to the more toxic pyridine during the electrochemical reduction of CO₂.     

Electrochemical properties of ordered mesoporous carbon and its electroanalytical application for selective determination of dopamine

The electrochemical properties of one novel carbon material, ordered mesoporous carbons (OMC), synthesized by templating SBA-15 mesoporous silica materials and the electrocatalytic behaviors of OMC modified electrode towards the oxidation of dopamine (DA) and ascorbic acid (AA) were studied. Cyclic voltammetry was used to evaluate the electrochemical behaviors of OMC in 5 mM K₃Fe(CN)₆/0.1 M KCl solution. OMC showed a faster electron transfer rate, as compared with glass carbon (GC) electrode. The higher electron transfer kinetics can be attributed to the existence of a large amount of edge plane defect sites in the OMC materials, which was verified by Raman spectroscopy. The cyclic voltammetric studies also showed the presence of oxygen-containing functional groups on the surface of OMC. Furthermore, the OMC modified electrode showed high electrocatalytic activities toward the oxidation of DA and AA, and resolved their voltammetric responses into two well-defined peaks with peak separation of ca. 0.210 V. The OMC modified electrode could be effectively used for the selective electrochemical determination of DA in the presence of AA.     

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (λ_max of [Fe(CN)₅PhNHNH₂]^3?, complex) under the optimum reaction conditions at: 2.5 × 10^?3 M [Fe(CN)₆]^4?, 1.0 × 10^?3 M [PhNHNH₂], 8.0 × 10^?7 M [Ag⁺], pH 2.8 ± 0.02, ionic strength (μ) 0.02 M (KNO₃) and temperature 30 ± 0.1 °C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8–8.0 × 10^?8 M with a detection limit of 2 × 10^?9 M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst–inhibitor (K_CI), catalyst–substrate (K_s) and Michaelis–Menten constant (K_m) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.     

Nanocomposite of a chromium Prussian blue with TiO2. Redox reactions and the synthesis of Prussian blue molecule-based magnets

The reaction of [NEt₄]₃[Cr(CN)₆] with titanium(III) p-toluenesulfonate at a pH of 2 affords a gray solid whose metal content and spectroscopic and magnetic properties are fully consistent with it being a Prussian blue material of stoichiometry “Ti^III[Cr^III(CN)₆] · H₂O”. The carbon, nitrogen, and hydrogen content, however, are not consistent with this stoichiometry, and further investigation showed that the gray material has a powder X-ray diffraction profile, infrared spectrum, and magnetic properties very similar to those of the “all-chromium” Prussian blue Cr^II[Cr^III(CN)₆]_0.67 · 6H₂O. All data, including the C, H, and N weight percentages, are consistent with the conclusion that the material isolated is a nanocomposite of Cr^II[Cr^III(CN)₆]_0.67 · xH₂O and TiO₂ in the ratio of 1–1.6. These results suggest that Ti^III reduces some of the [Cr^III(CN)₆]³⁻ ions to generate Ti^IV and Cr^II; the former hydrolyzes to amorphous TiO₂ · 2H₂O, the latter loses its bound CN ligands and reacts with unreacted [Cr^III(CN)₆]³⁻ ions to generate the crystalline all-chromium PB species. The electrochemical potentials suggest that the [Cr^III(CN)₆]³⁻ ion should not be reduced by Ti^III; evidently, this unfavorable reaction is driven by the insolubility of the reaction products. The results constitute a cautionary tale in two respects: first, that the characterization of Prussian blue materials must be conducted with care and, second, that the insolubility of Prussian blue analogues can sometimes drive reactions that in solution are thermodynamically unfavorable.     

About the OH yield in the radiolysis of an aqueous/H2O2 system. Its optimisation for water treatment

Unless the radiolytic reducing species are neutralised or converted into oxidising species, an EB remediation system cannot be considered a true Advanced Oxidation Processes (AOP). A water/H₂O₂ system irradiated by UVC mercury lamps constitutes a widely used OH production method. Employing H₂O₂ in radiolysis as well, an enhancement of the oxidative efficiency of an EB treatment can be obtained. Pulse radiolysis measurements of an aerated aqueous/H₂O₂/KSCN system have been systematically undertaken to assess the optimal H₂O₂ concentration. By linearly fitting a competition kinetics relationship, it is found that the scavengeable extra-yield of OH is ΔG(OH)=0.24 μmol J^?1 (R=0,9958), while the maximum experimental yield is measured G(OH)_max=(0.52±0.02) μmol J^?1 when [H₂O₂]=5–10 mM. Exceeding these concentrations the OH yield drops off.     

Photoinduced magnetism in rubidium cobalt hexacyanoferrate Prussian blue analogue nanoparticles

Nanoparticles of rubidium cobalt hexacyanoferrate were synthesized using the organic ligand poly(vinylpyrrolidone) (PVP). The particles, with composition Rb_1.8Co₄[Fe(CN)₆]_3.2 · nH₂O determined from CHN combustion analysis and ICP-MS, have an average size of 10 nm ± 2 nm. Similar to bulk samples, the nanoparticles show evidence of ferrimagnetic ordering in DC magnetization below T_C ∼ 15 K, although the transition is broadened due to the small particle size and its dispersion. Upon illumination with white light at 5 K, the field-cooled DC magnetization of these particles increased 40%.     

Synthesis,crystal structure,and magnetic properties of a copper(II) octacyanotungstate(V)-based magnet containing two types of organic ligands

Cu₃[W(CN)₈]₂(pyrimidine)₂(3-cyanopyridine)₂ · 4H₂O, a cyanide-bridged copper(II) octacyanotungstate(V) with two types of organic ligands (pyrimidine and 3-cyanopyridine), is prepared. In this compound, the coordination geometry of W is an 8-coordinated bicapped trigonal prism where five CN groups of [W(CN)₈] are bridged to five Cu ions, and the remaining three CN groups are free. The coordination geometries of the three types of Cu ions (Cu1, Cu2, and Cu3) are 6-coordinated pseudo-octahedron. The cyano-bridged-Cu2–W–Cu3-layer is linked by a Cu1 pillar unit, and a cavity along the a axis, which is occupied by 3-cyanopyridine molecules and zeolitic water molecules, exists. The present compound shows ferrimagnetism with a Currie temperature of 7 K, a saturation magnetization of 2.9 μ_B, and a coercive field of 7 Oe at 2 K.     

The electrochemical properties of thermophilic cytochrome P450 CYP119A2 at extremely high temperatures in poly(ethylene oxide)

The electrochemical measurements were carried out by using thermophilic cytochrome P450 CYP119A2 (P450st) modified with poly(ethylene oxide) (PEO) in PEO₂₀₀ as an electrochemical solvent. The PEO modified P450st gave clear reduction–oxidation peaks by cyclic voltammetry in oxygen-free PEO₂₀₀ up to 120 °C. The midpoint potential measured for the P450st was −120 mV vs. [Fe(CN)₆]⁴⁻/[Fe(CN)₆]³⁻ at 120 °C. The peak separation, ΔE, was 16 mV at 100 mV/s. The estimated electron transfer rate of PEO-P450st at 120 °C was 35.1 s⁻¹. The faster electron transfer reaction was achieved at higher temperatures. The electrochemical reduction of dioxygen was observed at 115 °C with the PEO-modified P450st system.     

The Effect of Adsorption of Ions of the Hexacyanoferrate(II)/(III) Redox Pair on Self-Assembly of Octanethiol at Its Adsorption from Aqueous Solutions on Gold Electrode

The effect of components of the redox pair K₃[Fe(CN)₆]/K₄[Fe(CN)₆] on the dynamics of formation of octanethiol (OT) monolayers from aqueous thiol-containing solutions of 0.1 М NaClO₄ is studied by cyclic voltammetry (CVA). The formation of OT monolayers is shown to depend on the presence of ions of hexacyanoferrate(II)/(III) in solution. Being added to solution, the components of the [Fe(CN)₆]^3–/4– redox pair sharply increase the time of formation of the insulating monolayer OT films and make them less stable. The destabilizing and inhibiting action of [Fe(CN)₆]^3–/4– ions becomes stronger as their concentration in solution increases. The adsorption activity of individual components of the redox pair is assessed. The strong and approximately equal adsorption activity of ions [Fe(CN)₆]^3– and [Fe(CN)₆]^4– on gold in the presence of octanethiol is observed. At the same time, OT and the hexacyanoferrate(II)/(III) ions can be placed in the following row: OT > [Fe(CN)6]^3– ≈ [Fe(CN)₆]^4–. Recommendations are given on how to eliminate the interfering action of the K₃[Fe(CN)₆]/K₄[Fe(CN)₆] redox-pair ions when studying the insulating properties of thiol monolayers on gold.     

Nanocomposite of manganese ferrocyanide and graphene: A promising cathode material for rechargeable lithium ion batteries

A nanocomposite of potassium manganese ferrocyanide and graphene (12% C, 88% K_1.8Mn_1.1Fe(CN)₆∙ 0.27H₂O) was prepared by ball milling of graphene oxide powder and nanoparticles of manganese–iron Prussian Blue. It exhibits enhanced electrochemical performance compared to pure Prussian Blue with a specific capacity of 150 mAhg^− 1 at average 3.8 V vs. Li⁺/Li and a good cyclability. The nanocomposite can be considered as competitive to standard cathode materials of present rechargeable lithium ion batteries like cobalt oxide, iron phosphate or NMC.     

Reactivity of OH radicals with chlorobenzoic acids—A pulse radiolysis and steady-state radiolysis study

The reactions of OH radicals with 2-, 3-, 4-chlorobenzoic acids (ClBzA) and chlorobenzene (ClBz), k(OH+substrates)=(4.5?6.2)×10⁹ dm³ mol^?1 s^?1, have been studied by pulse radiolysis in N₂O saturated solutions. The absorption maxima of the OH-adducts were in the range of 320?340 nm. Their decay was according to a second-order reaction, 2k=(1?9)×10⁸ dm³ mol^?1 s^?1. In the presence of N₂O/O₂ the formation of peroxyl radicals was detectable for 2-, 4-ClBzA and ClBz, k(OH-adduct+O₂)=(2?4)×10⁷ dm³ mol^?1 s^?1, while this reaction for 3-ClBzA was too slow to be registered. In the presence of N₂O the degradation rates induced by gamma radiation were very similar for all chlorobenzoic acids, yet the chloride formation was distinctly higher for 3-ClBzA. In the presence of oxygen the initial degradation of 2-and 4-ClBzA equaled the OH-radical concentration, whereas in case of 3-ClBzA only ～60% of OH led to degradation. The order for the efficiency of dehalogenation was 4->2->3-ClBzA. Several primary radiolytic products could be detected by HPLC. To evaluate the toxicity of final products a bacterial bioluminescence test was carried out.     

Physical properties of 3-methyl-N-butylpyridinium tetracyanoborate and 1-butyl-1-methylpyrrolidinium tetracyanoborate and ternary LLE data of [3-mebupy]B(CN)4 with an aromatic and an aliphatic hydrocarbon at T = 303.2 K and 328.2 K and p = 0.1 MPa

Several physical properties were determined for the ionic liquids 3-methyl-N-butylpyridinium tetracyanoborate ([3-mebupy]B(CN)₄) and 1-butyl-1-methylpyrrolidinium tetracyanoborate ([1-mebupyr]B(CN)₄), viz. liquid density, viscosity, surface tension, thermal stability, and heat capacity over the temperature range from 283.2 K to 475.2 K and at 0.1 MPa. The density and the surface tension were well correlated with linear equations and the viscosity with a Vogel–Fulcher–Tamman equation. The IL [3-mebupy]B(CN)₄ is stable up to a temperature of 480 K and the IL [1-mebupyr]B(CN)₄ up to a temperature of 548 K.Ternary data for the systems {(benzene + n-hexane), or (toluene + n-heptane), or (p-xylene + n-octane + [3-mebupy]B(CN)₄)} were determined at T = 303.2 K and 328.2 K and p = 0.1 MPa. All experimental data were well correlated with the NRTL model. The values of the experimental and calculated aromatic/aliphatic selectivity are in good agreement with each other. The LLE data of [1-mebupyr]B(CN)₄ were only measured in a 10 vol% aromatic feed for the three systems.     

Synthesis and properties of magnetite Fe3O4 via a simple hydrothermal route

Magnetic Fe₃O₄ crystals were synthesized by a simple hydrothermal method using K₄Fe(CN)₆ as single precursor. The chemical compositions and morphologies of the as-prepared samples were characterized in detail by X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and scanning electron microscopy (SEM). The experimental results show that the magnetic Fe₃O₄ particles are facilely prepared by the hydrothermal reaction of K₄Fe(CN)₆ and NaOH at 200 °C. Regular octahedral Fe₃O₄ crystals are obtained when Na₂S₂O₃ is added to the reaction system. The possible mechanism was discussed to elucidate the formation of the magnetic Fe₃O₄ crystals. Besides, the magnetic investigations show that the values of saturation magnetization and coercivity of octahedral Fe₃O₄ are about 87 emu/g and 184 Oe, respectively. Octahedral Fe₃O₄ also exhibits relatively good catalytic performance in the oxidation of styrene.