Modeling bacteriophage amplification as a predictive tool for optimized MALDI‐TOF MS‐based bacterial detection

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) is a valuable tool for rapid bacterial detection and identification but is limited by the need for relatively high cell count samples, which have been grown under strictly controlled conditions. These requirements can be eliminated by the natural infection of a viable bacterial species of interest with a host‐specific phage. This produces a rapid increase in phage protein concentrations in comparison to bacterial concentrations, which can in turn be exploited as a method for signal amplification during MALDI‐TOF MS. One drawback to this approach is the requirement for repetitive, time‐consuming sample preparation and analysis applied over the course of a phage infection to monitor phage concentrations as a function of time to determine the MALDI‐TOF MS detection limit. To reduce the requirement for repeated preparation and analysis, a modified phage therapy model was investigated as a means for predicting the time during a given phage infection when a detectable signal would occur. The modified model used a series of three differential equations composed of predetermined experimental parameters including phage burst size and burst time to predict progeny phage concentrations as a function of time. Using Yersinia pestis with plague diagnostic phage ?A1122 and Escherichia coli with phage MS2 as two separate, well‐characterized model phage–host pairs, we conducted in silico modeling of the infection process and compared it with experimental infections monitored in real time by MALDI‐TOF MS. Significant agreement between mathematically calculated phage growth curves and those experimentally obtained by MALDI‐TOF MS was observed, thus verifying this method's utility for significant time and labor reduction. Copyright © 2012 John Wiley & Sons, Ltd.     

Detection of pathogenic Verticillium spp. using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Verticillium spp. have been listed by the European and Mediterranean Plant Protection Organization (EPPO) and China as plant quarantine pests. Although attempts have been made to develop a simple routine laboratory assay to detect these organisms, none are routinely used. We describe for the first time a robust assay for reliable identification of Verticillium spp. using protein fingerprinting data obtained by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry(MALDI‐TOF‐MS). Several sample preparation methods and matrices were investigated to improve mass spectra for the routine identification of six species of Verticillium spp.(Verticillium dahiliae, V. alboatrum, V. fungicola, V. nigrescens, and V. lecanii) by MALDI‐TOF‐MS. Using the optimized experimental method, we constructed a protein fingerprint database for six species of Verticillium and established a analysis criteria of log(Score). This MALDI‐TOF‐MS protocol should prove useful as a rapid and reliable assay for distinguishing different Verticillium spp. Copyright © 2009 John Wiley & Sons, Ltd.     

Direct identification of trypanosomatids by matrix‐assisted laser desorption ionization–time of flight mass spectrometry (DIT MALDI‐TOF MS)

Accurate and rapid determination of trypanosomatids is essential in epidemiological surveillance and therapeutic studies. Matrix‐assisted laser desorption ionization/time of flight mass spectrometry (MALDI‐TOF MS) has been shown to be a useful and powerful technique to identify bacteria, fungi, metazoa and human intact cells with applications in clinical settings. Here, we developed and optimized a MALDI‐TOF MS method to profile trypanosomatids. trypanosomatid cells were deposited on a MALDI target plate followed by addition of matrix solution. The plate was then subjected to MALDI‐TOF MS measurement to create reference mass spectra library and unknown samples were identified by pattern matching using the BioTyper software tool. Several m/z peaks reproducibly and uniquely identified trypanosomatids species showing the potentials of direct identification of trypanosomatids by MALDI‐TOF MS. Moreover, this method discriminated different life stages of Trypanosoma cruzi, epimastigote and bloodstream trypomastigote and Trypanosoma brucei, procyclic and bloodstream. T. cruzi Discrete Typing Units (DTUs) were also discriminated in three clades. However, it was not possible to achieve enough resolution and software‐assisted identification at the strain level. Overall, this study shows the importance of MALDI‐TOF MS for the direct identification of trypanosomatids and opens new avenues for mass spectrometry‐based detection of parasites in biofluids. Copyright © 2016 John Wiley & Sons, Ltd.     

Block length determination of the block copolymer mPEG‐b‐PS using MALDI‐TOF MS/MS

The molar mass determination of block copolymers, in particular amphiphilic block copolymers, has been challenging with chromatographic techniques. Therefore, methoxy poly(ethylene glycol)‐b‐poly(styrene) (mPEG‐b‐PS) was synthesized by atom transfer radical polymerization (ATRP) and characterized in detail not only by conventional chromatographic techniques, such as size exclusion chromatography (SEC), but also by matrix‐assisted laser/desorption ionization tandem mass spectrometry (MALDI‐TOF MS/MS). As expected, different molar mass values were obtained in the SEC measurements depending on the calibration standards (either PEG or PS). In contrast, MALDI‐TOF MS/MS analysis allowed the molar mass determination of each block, by the scission of the weakest point between the PEG and PS block. Thus, fragments of the individual blocks could be obtained. The PEG block showed a depolymerization reaction, while for the PS block fragments were obtained in the monomeric, dimeric, and trimeric regions as a result of multiple chain scissions. The block length of PEG and PS could be calculated from the fragments recorded in the MALDI‐TOF MS/MS spectrum. Furthermore, the assignment of the substructures of the individual blocks acquired by MALDI‐TOF MS/MS was accomplished with the help of the fragments that were obtained from the corresponding homopolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The effect of temperature on the stability of compounds used as UV‐MALDI‐MS matrix: 2,5‐dihydroxybenzoic acid, 2,4,6‐trihydroxyacetophenone, α‐cyano‐4‐hydroxycinnamic acid, 3,5‐dimethoxy‐4‐hydroxycinnamic acid,nor‐harmane and harmane

The thermal stability of several commonly used crystalline matrix‐assisted ultraviolet laser desorption/ionization mass spectrometry (UV‐MALDI‐MS) matrices, 2,5‐dihydroxybenzoic acid (gentisic acid; GA), 2,4,6‐trihydroxyacetophenone (THA), α‐cyano‐4‐hydroxycinnamic acid (CHC), 3,5‐dimethoxy‐4‐hydroxycinnamic acid (sinapinic acid; SA), 9H‐pirido[3,4‐b]indole (nor‐harmane; nor‐Ho), 1‐methyl‐9H‐pirido[3,4‐b]indole (harmane; Ho), perchlorate of nor‐harmanonium ([nor‐Ho + H]⁺) and perchlorate of harmanonium ([Ho + H]⁺) was studied by heating them at their melting point and characterizing the remaining material by using different MS techniques [electron ionization mass spectrometry (EI‐MS), ultraviolet laserdesorption/ionization‐time‐of‐flight‐mass spectrometry (UV‐LDI‐TOF‐MS) and electrospray ionization‐time‐of‐flight‐mass spectrometry (ESI‐TOF‐MS)] as well as by thin layer chromatography analysis (TLC), electronic spectroscopy (UV‐absorption, fluorescence emission and excitation spectroscopy) and ¹H nuclear magnetic resonance spectroscopy (¹H‐NMR). In general, all compounds, except for CHC and SA, remained unchanged after fusion. CHC showed loss of CO₂, yielding the trans‐/cis‐4‐hydroxyphenylacrilonitrile mixture. This mixture was unambiguously characterized by MS and ¹H‐NMR spectroscopy, and its sublimation capability was demonstrated. These results explain the well‐known cluster formation, fading (vanishing) and further recovering of CHC when used as a matrix in UV‐MALDI‐MS. Commercial SA (SA 98%; trans‐SA/cis‐SA 5 : 1) showed mainly cis‐ to‐trans thermal isomerization and, with very poor yield, loss of CO₂, yielding (3′,5′‐dimethoxy‐4′‐hydroxyphenyl)‐1‐ethene as the decarboxilated product. These thermal conversions would not drastically affect its behavior as a UV‐MALDI matrix as happens in the case of CHC. Complementary studies of the photochemical stability of these matrices in solid state were also conducted. Copyright © 2008 John Wiley & Sons, Ltd.     

2,2′:3′,2′′‐Terthiophene‐Based all‐Thiophene Dendrons and Dendrimers: Synthesis,Structural Characterization,and Properties

The synthesis of generational dendritic oligothiophenes (DOTs) has been successfully achieved by a divergent/convergent approach that involves halogenation, boronation, and palladium‐catalyzed Suzuki coupling reactions. The key point in the presented synthetic approach is the use of trimethylsilyl (TMS) protecting groups, which allow for the core‐lithiation and subsequent boronation of the dendrons and for the peripheral ipso‐substitution with iodine monochloride or N‐bromosuccimide. In addition, the TMS protecting groups can be completely removed by using tetrabutylammonium fluoride, thus yielding only‐thiophene‐based dendrons and dendrimers. Due to their highly branched structure, all these synthesized DOTs are soluble in organic solvents. Chemical structures were confirmed by NMR spectroscopic, mass spectrometric, and elemental analysis. Concentration‐dependent ¹H NMR spectroscopic investigations revealed that the higher generation compounds tend to aggregate in solution. Such an aggregation behavior was further confirmed by measuring with MALDI‐TOF MS. Both MALDI‐TOF MS and gel‐permeation chromatography (GPC) analyses confirmed the monodispersity of the DOTs. Furthermore, GPC results revealed that these DOT molecules adopt a condensed globular molecular shape. Their optical and electronic properties were also investigated. The results indicated that these DOTs comprise various conjugated α‐oligothiophenes with different chain lengths, which results in the higher generation compounds showing broad and featureless UV/Vis absorption spectra and ill‐defined redox waves.     

High‐resolution MALDI‐TOF MS study on analysis of low‐molecular‐weight products from photo‐oxidation of poly(3‐hexylthiophene)

High‐resolution matrix‐assisted laser desorption/ionization (MALDI) time‐of‐flight mass spectrometry (TOF MS) was used for the analysis of the low‐molecular‐weight products from the photo‐oxidation of poly(3‐hexylthiophene) (P3HT) in solution and thin film. Eight new peak series were observed in the low‐mass range of the mass spectra of the products degraded in solution, and the formulas of the eight components were determined from the accurate mass. From SEC/MALDI‐TOF MS, two components were identified as the degraded products, and the other six components were derived from the fragmentation of the degraded products during the MALDI process. A mechanism for the formation of these components was proposed on the basis of the results of MALDI‐TOF MS. For the thin film degradation, a part of products in the solution degradation were observed, which supports that the oxidation of P3HT in solution and thin film proceeded in the same mechanism. This study shows that high‐resolution MALDI‐TOF MS is effective for the analysis of the low‐molecular‐weight products from P3HT photo‐oxidation and expected to be feasible for the degradation analyses of other polymers. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry for the study of Helicobacter pylori

The characteristics of matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry based investigation of extremely variable bacteria such as Helicobacter pylori were studied. H. pylori possesses a very high natural variability. Accurate tools for species identification and epidemiological characterization could help the scientific community to better understand the transmission pathways and virulence mechanisms of these bacteria. Seventeen clinical as well as two laboratory strains of H. pylori were analyzed by the MALDI Biotyper method for rapid species identification. Mass spectra collected were found containing 7–13 significant peaks per sample, and only six protein signals were identical for more than half of the strains. Four of them could be assigned to ribosomal proteins RL32, RL33, RL34, and RL36. The reproducible peak with m/z 6948 was identified as a histidine‐rich metal‐binding polypeptide by tandem mass spectrometry (MS/MS). In spite of the evident protein heterogeneity of H. pylori the mass spectra collected for a particular strain under several cultivations were highly reproducible. Moreover, all clinical strains were perfectly identified as H. pylori species through comparative analysis using the MALDI Biotyper software (Bruker Daltonics, Germany) by pattern matching against a database containing mass spectra from different microbial strains (n = 3287) including H. pylori 26695 and J99. The results of this study allow the conclusion that the MALDI‐TOF direct bacterial profiling is suited for H. pylori identification and could be supported by mass spectra fragmentation of the observed polypeptide if necessary. Copyright © 2010 John Wiley & Sons, Ltd.     

MALDI‐TOF‐Massenspektrometrie: Risikoanalyse im Flug

The high accuracy, molecular resolution and sensitivity of matrix‐assisted laser desorption/ionisation time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) make it an efficient method for analysing all kinds of biomolecules including nucleic acids, proteins/peptides, carbohydrates and lipids. MALDI‐TOF‐MS based high‐throughput genotyping of genetic heterogeneities possesses the potential of becoming a routine method. MAL‐DI‐TOF‐MS can be used for the identification of proteins and posttranslational modifications. Taken together, MALDI‐TOF‐MS represents a integrated platform technology in bioanalytics and molecular medicine.     

MALDI‐TOF MS characterization of dihydroxy telechelic polyisobutylene

MALDI‐TOF MS characterizations of dihydroxy telechelic polyisobutylene is reported. Dichloro telechelic polyisobutylene (Cl—PIB—Cl) was synthesized by means of living cationic polymerization using p‐dicumyl chloride/BCl₃/DMSO initiating systems. The resulting polymer was functionalized by polymer analogous reactions to yield dihydroxy telechelic polyisobutylene (HO—PIB—OH). It was then investigated by MALDI‐TOF MS in the cation mode using 1,8‐dihidroxy‐9(10H)‐anthracenone (dithranol)/CF₃COOAg matrix. The MALDI TOF MS spectra showed an increase in mass by 56 amu units attributed to the isobutylene monomer increment. The endgroups of HO—PIB—OH were determined. A good agreement was also found between the calculated isotope distributions and the isotope distributions determined by means of MALDI.     

Characterization of different poly(2‐ethyl‐2‐oxazoline)s via matrix‐assisted laser desorption/ionization time‐of‐flight tandem mass spectrometry

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) coupled with CID (collision‐induced dissociation) has been used for the detailed characterization of two poly(2‐ethyl‐2‐oxazoline)s as part of a continuing study of synthetic polymers by MALDI‐TOF MS/MS. These experiments provided information about the variety of fragmentation pathways for poly(oxazoline)s. It was possible to show that, in addition to the eliminations of small molecules, like ethene and hydrogen, the McLafferty rearrangement is also a possible fragmentation route. A library of fragmentation pathways for synthetic polymers was also constructed and such a library should enable the fast and automated data analysis of polymers in the future. Copyright © 2009 John Wiley & Sons, Ltd.     

Identification and classification of seafood‐borne pathogenic and spoilage bacteria: 16S rRNA sequencing versus MALDI‐TOF MS fingerprinting

The present study aims to compare two molecular technologies, 16S rRNA sequencing and MALDI‐TOF MS, for bacterial species identification in seafood. With this aim, 70 reference strains from culture collections, including important seafood‐borne pathogenic and spoilage bacterial species, and 50 strains isolated from commercial seafood products, were analysed by both techniques. Genomic analysis only identified the species of 50% of the isolated strains, proving to be particularly poor at identifying members of the Pseudomonas and Bacillus genera. In contrast, MALDI‐TOF MS fingerprinting identified 76% of the strains at the species level. The mass spectral data were submitted to the SpectraBank database ( http://www.spectrabank.org ), making this information available to other researchers. Furthermore, cluster analysis of the peak mass lists was carried out with the web application SPECLUST and the calculated groupings were consistent with results determined by a phylogenetic approach that is based on the 16S rRNA sequences. However, the MALDI‐TOF MS analysis demonstrated more discriminating potential that allowed for better classification, especially for the Pseudomonas and Bacillus genera. This is of importance with respect to the varying pathogenic and spoilage character at the intragenus and intraspecies level. In this sense, MALDI‐TOF MS demonstrated to be a competent bacterial typing tool that extends phenotypic and genotypic approaches, allowing a more ample classification of bacterial strains.     

Functionalization of polymeric organolithium compounds with 3,4‐epoxy‐1‐butene: Precursors for diene‐functionalized macromonomers

The functionalization of polymeric organolithiums (PLi) with 3,4‐epoxy‐1‐butene (EPB) in a hydrocarbon solution yielded the corresponding hydroxybutene‐functionalized polymers in high yields (>95%). Three modes of addition of PLi to EPB were observed (1,4, 3,4, and 4,3). The products and chain‐end structures were characterized by ¹H NMR, ¹³C NMR, attached‐proton‐test ¹³C NMR, calculated ¹³C NMR chemical shifts, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). The regioselectivity of the addition depended on the PLi chain‐end structure, the reaction conditions, and the addition of lithium salts or Lewis bases. In the absence of additives, the functionalization of poly(styryl)lithium (PSli) produced equal amounts of 1,4‐, 3,4‐, and 4,3‐addition, as determined by quantitative ¹³C NMR analysis. The use of a low temperature (6 °C), inverse addition, the addition of triethylamine (TEA; [TEA]/[PSLi] = 20) as a Lewis base, or dienyllithium chain ends produced polymers with only the 1,4‐addition product. Mild dehydration of the hydroxybutene‐functionalized polymer with p‐toluenesulfonic acid produced the corresponding diene‐functionalized macromonomer, as shown by MALDI‐TOF MS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 947–957, 2003     

Design of new amphiphilic triblock copoly(2‐oxazoline)s containing a fluorinated segment

New amphiphilic triblock copoly(2‐oxazoline)s, containing hydrophobic domains with fluorine‐containing blocks, were synthesized. Using microwave radiation as heating source, triblock copolymers with narrow molar mass distributions were obtained by the sequential addition of 2‐ethyl‐2‐oxazoline, 2‐(1‐ethylheptyl)‐2‐oxazoline, and 2‐(2,6‐difluorophenyl)‐2‐oxazoline. The polymers obtained were characterized by size exclusion chromatography, ¹H NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). To investigate the incorporation of all three monomers into the triblock copolymers, a model polymer was prepared with shorter blocks exhibiting a suitable length to be measured in the reflector mode of a MALDI‐TOF MS. In addition, kinetic investigations on the homopolymerizations of all monomers were performed in nitromethane at 140 °C, yielding the polymerization rates under these conditions. DSC measurements of poly(2‐(1‐ethylheptyl)‐2‐oxazoline) and poly(2‐(2,6‐difluorophenyl)‐2‐oxazoline)) revealing glass transitions at about 33 and 120 °C, respectively. The thermal analysis of a blend of the two polymers showed two glass transitions revealing demixing, which could be an indicating for the immiscibility of the two components in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry study on copolymers obtained by the alternating copolymerization of bis(γ‐lactone) and epoxide with potassium tert‐butoxide

Oligomer samples obtained by the anionic copolymerization of a bis(γ‐lactone), 2,8‐dioxa‐1‐methylbicyclo[3.3.0]octane‐3,7‐dione ( 1 ), and glycidyl phenyl ether with potassium tert‐butoxide have been analyzed by matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. The MALDI‐TOF mass spectra of these cooligomers show well‐resolved signals that can be reliably assigned to linear, alternating cooligomers that have carboxylate chain ends or alkoxide chain ends and cyclic ones. The formation of these three series of cooligomers suggests that the polymerization process involves concomitant intermolecular transesterification and intramolecular back‐biting. The intramolecular back‐biting reaction causes the formation of cyclic cooligomers, whereas the intermolecular transesterification causes the reduction of the molecular weight and the transformation of the alkoxide active chain end into a carboxylate chain end. The MALDI‐TOF mass spectrometry study has shown that an excess of monomer 1 enhances the selectivity of propagation by increasing the probability of the attack of the alkoxide chain end to 1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2643–2649, 2005     

Comparison of MALDI‐TOF mass spectra with microsatellite length polymorphisms in Candida albicans

Candida albicans is the most frequent yeast involved in human infections. Its population structure can be divided into several genetic clades, some of which have been associated with antifungal susceptibility. Therefore, detecting and monitoring fungal clones in a routine laboratory setting would be a major epidemiological advance. Matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra results are now widely used as bar codes to identify microorganisms in clinical microbiology laboratories. This study aimed at testing MALDI‐TOF mass spectra bar codes to identify clades among a set of C. albicans isolates. Accordingly, 102 clinical strains were genotyped using 10 microsatellite markers and analyzed via MALDI‐TOF mass spectrometry. The mass spectra were compared with a reference spectral library including 33 well‐characterized collection strains, using a Microflex^TM system and Biotyper^TM software, to test the capacity of the spectrum of a given isolate to match with the reference mass spectrum of an isolate from the same genetic clade. Despite high confidence species identification, the spectra failed to significantly match with the corresponding clade (p = 0.74). This was confirmed with the MALDI‐TOF spectra similarity dendrogram, in which the strains were dispersed irrespective of their genetic clade. Various attempts to improve intra‐clade spectra recognition were unsuccessful. In conclusion, MALDI‐TOF mass spectra bar code analysis failed to reliably recognize genetically related C. albicans isolates. Further studies are warranted to develop alternative MALDI‐TOF mass spectra analytical approaches to identify and monitor C. albicans clades in the routine clinical laboratory. Copyright © 2015 John Wiley & Sons, Ltd.     

Mass spectrometric characterization of the zein protein composition in maize flour extracts upon protein separation by SDS‐PAGE and 2D gel electrophoresis

Highly homogenous α zein protein was isolated from maize kernels in an environment‐friendly process using 95% ethanol as solvent. Due to the polyploidy and genetic polymorphism of the plant source, the application of high resolution separation methods in conjunction with precise analytical methods, such as MALDI‐TOF‐MS, is required to accurately estimate homogeneity of products that contain natural zein protein. The α zein protein product revealed two main bands in SDS‐PAGE analysis, one at 25 kDa and other at 20 kDa apparent molecular mass. Yet, high resolution 2DE revealed approximately five protein spot groups in each row, the first at ca. 25 kDa and the second at ca. 20 kDa. Peptide mass fingerprinting data of the proteins in the two dominant SDS‐PAGE bands matched to 30 amino acid sequence entries out of 102 non‐redundant data base entries. MALDI‐TOF‐MS peptide mapping of the proteins from all spots indicated the presence of only α zein proteins. The most prominent ion signals in the MALDI mass spectra of the protein mixture of the 25 kDa SDS gel band after in‐gel digestion were found at m/z 1272.6 and m/z 2009.1, and the most prominent ion signals of the protein mixture of the 20 kDa band after in‐gel digestion were recorded at m/z 1083.5 and m/z 1691.8. These ion signals have been found typical for α zein proteins and may serve as marker ion signals which upon chymotryptic digestion reliably indicate the presence of α zein protein in two hybrid corn products.     

Sodiation as a tool for enhancing the diagnostic value of MALDI‐TOF/TOF‐MS spectra of complex astaxanthin ester mixtures from Haematococcus pluvialis

The microalga Haematococcus pluvialis produces the pigment astaxanthin mainly in esterified form with a multitude of fatty acids, which results in a complex mixture of carotenol mono‐ and diesters. For rapid fingerprinting of these esters, matrix‐assisted laser desorption ionization time of flight mass spectrometry (MALDI‐TOF/TOF‐MS) might be an alternative to traditional chromatographic separation combined with MS. Investigation of ionization and fragmentation of astaxanthin mono‐ and diester palmitate standards in MALDI‐TOF/TOF‐MS showed that sodium adduct parent masses [M + Na]⁺ gave much simpler MS² spectra than radical / protonated [M]^+● / [M + H]⁺ parents. [M + Na]⁺ fragments yielded diagnostic polyene‐specific eliminations and fatty acid neutral losses, whereas [M]^+● / [M + H]⁺ fragmentation resulted in a multitude of non‐diagnostic daughters. For diesters, a benzonium fragment, formed by polyene elimination, was required for identification of the second fatty acid attached to the astaxanthin backbone. Parents were forced into [M + Na]⁺ ionization by addition of sodium acetate, and best signal‐to‐noise ratios were obtained in the 0.1 to 1.0 mM range. This method was applied to fingerprinting astaxanthin esters in a crude H. pluvialis extract. Prior to MALDI‐TOF/TOF‐MS, the extract was fractionated by normal phase Flash chromatography to obtain fractions enriched in mono‐ and diesters and to remove pheophytin a, which compromised monoester signals. All 12 types of all‐trans esterified esters found in LC were identified with MALDI‐TOF/TOF‐MS, with the exception of two minor monoesters. Copyright © 2013 John Wiley & Sons, Ltd.     

Heterobifunctional isotope‐labeled amine‐reactive photo‐cross‐linker for structural investigation of proteins by matrix‐assisted laser desorption/ionization tandem time‐of‐flight and electrospray ionization LTQ‐Orbitrap mass spectrometry

Chemical cross‐linking combined with a subsequent enzymatic digestion and mass spectrometric analysis of the created cross‐linked products presents an alternative approach to assess low‐resolution protein structures. By covalently connecting pairs of functional groups within a protein or a protein complex a set of structurally defined interactions is built up. We synthesized the heterobifunctional amine‐reactive photo‐cross‐linker N‐succinimidyl p‐benzoyldihydrocinnamate as a non‐deuterated (SBC) and doubly deuterated derivative (SBDC). Applying a 1:1 mixture of SBC and SBDC for cross‐linking experiments aided the identification of cross‐linked amino acids in the mass spectra based on the characteristic isotope patterns of fragment ions. The cross‐linker was applied to the calcium‐binding protein calmodulin with a subsequent analysis of cross‐linked products by nano‐high‐performance liquid chromatography matrix‐assisted laser desorption/ionization tandem time‐of‐flight mass spectrometry (nano‐HPLC/MALDI‐TOF/TOF‐MS) and nano‐HPLC/nano‐electrospray ionization (ESI)‐LTQ‐Orbitrap‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of microchannel plate detector response for the detection of native multiply charged high mass single ions in orthogonal-time-of-flight mass spectrometry using a Timepix detector

Time-of-flight (TOF) systems are one of the most widely used mass analyzers in native mass spectrometry (nMS) for the analysis of non-covalent multiply charged bio-macromolecular assemblies (MMAs). Typically, microchannel plates (MCPs) are employed for high mass native ion detection in TOF MS. MCPs are well known for their reduced detection efficiency when impinged by large slow moving ions. Here, a position- and time-sensitive Timepix (TPX) detector has been added to the back of a dual MCP stack to study the key factors that affect MCP performance for MMA ions generated by nMS. The footprint size of the secondary electron cloud generated by the MCP on the TPX for each individual ion event is analyzed as a measure of MCP performance at each mass-to-charge (m/z) value and resulted in a Poisson distribution. This allowed us to investigate the dependency of ion mass, ion charge, ion velocity, acceleration voltage, and MCP bias voltage on MCP response in the high mass low velocity regime. The study of measurement ranges; ion mass = 195 to 802,000 Da, ion velocity = 8.4 to 67.4 km/s, and ion charge = 1+ to 72+, extended the previously examined mass range and characterized MCP performance for multiply charged species. We derived a MCP performance equation based on two independent ion properties, ion mass and charge, from these results, which enables rapid MCP tuning for single MMA ion detection.