高次柱面反射型太阳能聚光镜的光学设计

提出了一种新型高效太阳能聚光镜, 这种聚光镜用一组特定系数, a₂, a₄, a₆, a₈, a₁₀, a₁₂, a₁₄, a₁₆ 与 C的高次柱面内壁的一部分作为反射镜. 利用高次柱面方程和光反射定律, 推导出了在高次柱面内壁上太阳反射光束的方向矢量与高次柱面系数C, a₂,a₄, a₆, a₈, a₁₀, a₁₂, a₁₄, a₁₆的关系, 通过优化设计这些系数, 可以使入射到高次柱面内壁上的太阳光束反射后全部聚焦在一条与柱面母线平行的宽度很窄的线段上, 形成线聚光. 这组特定系数用粒子群优化算法求得, 并经计算机模拟证明其聚焦效果. 用这组特定系数的高次柱面作为聚光镜, 其对光的压缩比可达148倍, 其线性光斑可作为一种强光源或高温光源. 高次柱面反射镜可由金属或玻璃直接磨制而成, 也可由高次柱面骨架和铺设在骨架上的镀铝聚酯薄膜构成. 关键词： 太阳能聚光镜 高次柱面 多项式系数优化 线性聚焦     

具有不同涂层的样品表面双向反射分布函数的三维测量

利用半球空间双向反射分布函数测量装置,采用样本比值法,实验测量了不同材质及涂层表面对激光束在整个半球空间内的双向反射分布函数.分析了漫反射板与无涂层铝板（裸板）表面,以及不同涂层和不同入射角下同一涂层对入射光的反射光强的空间分布,得出了所测几种样品在特定波长激光照射下的表面反射与散射特性.     

X射线荧光分析用全聚焦分光晶体的磨制

目前X射线光谱仪中常用的晶体有:平面反射晶体,柱面弯曲反射晶体,柱面弯曲透射晶体,边缘晶体和双曲晶体,其中以平面反射和柱面弯曲反射晶体的应用最为普遍. 由于平面反射晶体分光计是非聚焦的,衍射的X射线不能为探测器全部接收,因此,X射线强度损失较大. 柱面弯曲反射晶体,就其聚焦方式而言,有半聚焦和全聚焦之分.所谓半聚焦(Johan式)即将平面晶体弯成半径为2R的往面(R为聚焦圆半径),此时,晶体点阵面的曲率为1/2R,晶面与表面平行,在此情况下,仅仅与聚焦圆相切的那部分晶体能产生真正的聚焦作用.而全聚焦(Johanson式)晶体除晶面曲率为1/2R…     

金属Ag包覆介质球的FCC结构反射特性研究

用转移矩阵方法研究了由核壳（Core-Shell）结构组成的面心立方在可见光和近红外波频域的反射特性.考虑金属介质的色散特性,计算了壳层厚度对禁带的影响及沿与ΓL方向成一定角度θ时的反射特性曲线.研究发现,当包覆层厚度d小于0.08倍的这种核壳结构的半径时,随d增大低频域第一反射峰的位置“蓝移”;并且金属厚度大于该阈值时基本无变化.而在同一包覆层厚度,随入射角度θ 增大低频域的第一反射峰逐渐“蓝移”;在θ =40°时第二反射峰突变.     

金属Ag包覆介质球的FCC结构反射特性研究

用转移矩阵方法研究了由核壳(Core-Shell)结构组成的面心立方在可见光和近红外波频域的反射特性.考虑金属介质的色散特性,计算了壳层厚度对禁带的影响及沿与ΓL方向成一定角度θ时的反射特性曲线.研究发现,当包覆层厚度d小于0.08倍的这种核壳结构的半径时,随d增大低频域第一反射峰的位置"蓝移";并且金属厚度大于该阈值时基本无变化.而在同一包覆层厚度,随入射角度θ 增大低频域的第一反射峰逐渐"蓝移";在θ =40°时第二反射峰突变.     

树脂锚定SiO2粒子构建减反射表面模拟

结合当前塑料基材表面构建减反射结构的现状和趋势,使用COMSOL Multiphysics软件在可见光谱范围内研究了中空二氧化硅粒子（HSP）和HSP-实心二氧化硅粒子混合对所构成的减反射表面的光学性能的影响。具体考察的因素包括：HSP的尺寸、空心度、粒子间距、树脂覆盖高度、入射角和排布方式等几何参数。结果表明,当采用半径为100 nm的HSP,且树脂覆盖粒子一半高度时,在六方格子排布的HSP间隙掺入小尺寸实心二氧化硅粒子,可在整个可见光谱范围内获得较低的反射率,涂层的平均反射率可低至0.24%。     

干湿状态对花岗岩表面双向反射特性影响实验研究

实验测量了0.328 靘和1.4 靘两种波段下花岗岩表面在干、湿条件下的BRDF.发现BRDF受表面干湿状态影响很大,润湿表面出现明显的镜反射分量.因花岗岩表面湿润程度不同,入射光在表面经历的反射过程大不相同.若表面形成一层稳定的水膜,该水膜在局部区域将起到半透明光滑界面的作用,导致材料表面的BRDF出现明显的镜反射分量.     

太平天国侍王府壁画表面修复材料的原位无损FTIR分析

太平天国侍王府壁画是中国南方壁画的典型代表,具有重要的历史、文化和艺术价值。历史上曾对多幅壁画进行过化学保护,部分壁画表面形成了一定厚度的有机物涂层,分析研究壁画保护修复材料成分对于文物保护具有重要的理论和现实意义。由于文物的珍贵性与不可再生性,原位无损分析技术的研究和应用是未来文物分析的发展趋势,基于便携红外光谱仪的反射红外光谱技术是对文物表面材质较为理想的无损分析手段。利用反射傅里叶变换红外(FTIR)光谱对侍王府壁画的地仗层和表面修复材料涂层进行了现场原位无损分析,这在我国古代壁画及其保护修复材料分析中属首次。首先测试了无涂层壁画白色背景位置反射FTIR光谱,并与标准无机矿物光谱比对确定了壁画地仗层成分主要为方解石和生石膏。在此基础上,分析了无涂层和有涂层壁画表面的红外反射特性及地仗层化学成分对表面涂层反射FTIR光谱测试的影响,探讨了应用Kramers-Kronig(K-K)变换处理数据的可行性,确定了K-K变换的应用范围,分析了壁画涂层K-K变换后反射光谱与衰减全反射(ATR)光谱的差异,并通过显微ATR FTIR光谱和热裂解气相色谱质谱联用(Py-GC/MS)技术分析验证了原位反射FTIR光谱测试结果的可靠性,扫描电子显微镜(SEM)测量了涂层厚度,证明不同厚度涂层均能得到可解析的高质量反射FTIR光谱。最终确定侍王府壁画曾使用过聚醋酸乙烯酯、聚二甲基硅氧烷和三甲树脂三种高分子材料进行过表面加固,并得出壁画保存现状和修复材料及涂层厚度有较大关系。证明了基于反射模式的FTIR光谱技术能准确有效地获取文物表面有机物和部分无机物成分信息。该方法对表面有机涂层尤为敏感,是壁画类文物较为理想的无损分析方法,在壁画保护研究领域具有十分广阔的应用前景。同时,该研究弥补了我国壁画类文物表面有机物原位无损分析的不足,为该领域研究提供了一条新思路。     

反射型光变色超表面滤光结构

提出了一种反射型超表面滤光结构,该滤光结构由基底、低折射率纳米光栅、Ag光栅、SiNx高折射率介质层组成.理论模拟结果表明:45°入射角下,在垂直于光栅栅线的入射平面内,反射谱峰值出现在475 nm波长处;在平行于光栅栅线的入射平面内,反射谱峰值出现在550 nm波长处.其电场分布特性表明,在不同的平面内TE偏振入射光激发的导模共振区域不同,TM偏振下激发的导膜共振强度与表面等离子体共振强度不同,导致该结构在垂直于光栅栅线方向与平行于光栅栅线方向的两个平面内表现出两种截然不同的颜色.基于此制备的超表面结构样品不但光变色效果明显,且易于与纳米压印工艺相结合实现大幅面光变色结构制备,在防伪和图案信息编码等领域有广阔的应用前景.     

爆轰驱动金属飞层对碰凸起和微射流形成的数值模拟研究

本文对柱面两极点起爆情况下滑移爆轰波驱动两层金属飞层对碰凸起和微射流形成进行了模拟研究. 铅飞层内界面走时计算结果与实验结果能够较好符合. 在两极位置铅飞层内部出现断裂并形成空腔, 内壁面则形成鼓包型凸起; 在赤道位置飞层内壁面凸起后断裂产生大尺度金属颗粒, 其和微喷射形成的小尺度颗粒叠加构成了对碰区凸起现象. 在铅飞层内表面微喷射现象的研究中发现, 两极附近的微喷物质最大速度逐渐下降, 而对碰区附近的微喷颗粒最大速度反而随时间逐渐增高. 之后, 通过设计沟槽型微喷计算模型, 验证了在两极和赤道上铅飞层内表面产生的初始微喷射最大速度能够由同一均匀缺陷表面所产生. 最后, 通过数值模拟分析研究初步给出了该问题中抑制金属飞层对碰凸起和微喷现象的方法.     

Analogs of the brewster effect and total internal reflection for cylindrical waves

Analogs of the Brewster effect and total internal reflection were investigated for cylindrical waves passing through a cylindrical interface. It was found that, in the case of cylindrical geometry, the Brewster effect is also observed but weakens with decreasing moment of momentum of a cylindrical wave. Wave reflection from a small-radius cylindrical interface is analyzed. Asymptotic expressions for the reflection factor of a cylindrical wave are obtained when the radius of the interface tends to zero. It was found that, as the radius the interface decreases, the reflection factor of a cylindrical wave with a nonzero moment of momentum approaches unity from the left but does not reach this value.     

Absorption of electromagnetic radiation by a bimetallic cylindrical particle of finite length

The absorption cross section of electromagnetic radiation is calculated for a bimetallic cylindrical particle of finite length. A general case is considered, where the ratio of the radius of the particle core to the particle radius and the ratio of the radius of the particle to its length can take arbitrary values. The conditions of diffuse reflection of electrons from the internal and external surfaces of the metal shell of the particle and from its faces are used as the boundary conditions of the problem. The effect of the ratio of the radius of the core of a bimetallic cylindrical particle to the particle radius and the ratio of the radius of the particle to its length on the electromagnetic properties of the particle is analyzed.     

Effect of the character of conduction electron reflection on the electromagnetic properties of an inhomogeneous cylindrical particle

The cross section of magnetic absorption of a small elongated cylindrical particle with a dielectric core and metallic shell is calculated. The general case of an arbitrary value of the ratio of the dielectric core radius to the radius of the particle is considered. The condition of mixed (mirror-diffuse) reflection of conduction electrons from the boundaries of the metal layer of the particle is chosen as the boundary condition to the problem. The limiting cases are considered, and the results obtained are discussed.     

Electric-field energy absorption by a bimetallic cylindrical particle

The electric-field energy absorption cross section of a bimetallic cylindrical particle is calculated for an external ac electric field directed along the axis of the particle. The calculations are performed for arbitrary values of the ratio of the particle core radius to the particle radius. The reflection of electrons from the inner and outer surfaces of the metallic shell of the particle is assumed to be diffuse. The limiting cases are considered, and the results obtained are discussed.     

圆环形聚焦声场的构建与调控

提出了一种由径向振动模式的圆环形压电换能器晶片组成的圆柱形阵列换能器结构, 依据阵元激励信号的相位调控机理, 推导了圆环形聚焦声场的调控公式, 在三维空间中构建了圆环形聚焦声场, 实现了对其聚焦区域大小、聚焦圆环半径以及轴向位置移动的调控. 理论分析和仿真研究表明, 所提出的圆柱形阵列换能器实现了对圆环形聚焦声场的调控. 为检测超声、功率超声、医学超声等应用领域提供了一种可实现的新型圆环形可调控聚焦声场.     

Three-dimensional vector radiative transfer in a semi-infinite, Rayleigh scattering medium exposed to a polarized laser beam: spatially varying reflection matrix

Three-dimensional vector radiative transfer in a semi-infinite, Rayleigh scattering medium exposed to a polarized, Gaussian laser beam directed perpendicular to the surface is studied. The focus of this investigation is the 4×4, spatially varying reflection matrix that can be used to determine the normally backscattered radiation when the polarization of the incident radiation is specified. An inverse integral transform is used to construct the spatially varying reflection matrix from the generalized reflection matrix found in a previous study. The elements of this matrix depend on location specified by optical radius and azimuthal angle. The azimuthal variation is found by performing part of the inverse transform analytically, while the radial variation is described by five functions that are calculated numerically via an inverse Hankel transform. Benchmark numerical results for these five functions are presented, and the effects of beam radius and particle concentration are discussed. Expressions that describe the behavior of the reflection functions at small and large optical radii are developed, and comparisons are made to the one-dimensional and scalar situations. The scalar approximation fails to predict the three-dimensional effects produced by the polarized beam, and even when the incident radiation is unpolarized, the error in the scalar reflection function can be as high as 20%.     

Shear Alfvén wave perpendicular propagation from the kinetic to the inertial regime

We report on observations of shear Alfvén waves radiated from a source of small transverse size, and the subsequent radial confinement of wave magnetic field energy within a cylindrical plasma. The radius of confinement lies between the kinetic regime of the bulk plasma and the inertial regime at the plasma edge; this radius is found to be a function of wave frequency. Numerical calculations using kinetic theory predict a zero in the perpendicular group velocity at a radius which varies in accord with the observations. An analytic expression for the perpendicular group velocity (valid for small perpendicular wave numbers) is given in the vicinity of the zero crossing.     

Anechoic coatings obtained from two- and three-dimensional monopole resonance diffraction gratings

Underwater sound reflections can be reduced in magnitude by a rubber coating including three-dimensional (3-D) cavities forming a doubly periodic diffraction grating. A monopole resonance for sphere-like cavities enhances absorption in the surrounding rubber solid. A corresponding resonance for an infinite cylinder is studied in the present paper. Appearing at a considerably lower frequency than for a sphere with the same radius, it suggests the possibility of much thinner anechoic coatings including cylindrical cavities, with axes in a lateral direction, forming a diffraction grating with a single period. This is effectively a 2-D case, because of invariance in the axial direction. Subsequent coating design computations, using the layer-multiple-scattering method and including cavities of different sizes, show improved reflection reduction with coatings only about one third as thick. Still accounting for multiple scattering among the cavities and capturing the essential physics, the monopole approximation is applied to advance the analytic study of the reflection reduction. An energy decomposition relation is derived and used to quantify the absorption of the incident sound energy by cavities of different sizes. Coatings based on filled inclusions and other resonance effects are briefly considered. Again, the 2-D alternative with cylinders of mixed sizes gives thinner coatings.     

Simple and high efficient optical trapping using a cylindrical lens and a single plane wave of incidence

We suggest a simple and high efficient method for trapping particles in the evanescent field. In this method, a single plane wave is normally incident on the cylindrical surface of a cylindrical lens and then incident on the plane surface of the lens at an angle larger than the critical angle. Multiple reflections of light within the cylindrical lens create two evanescent waves with different directions in the transmitted field. Interference of two evanescent waves comes into being a standing wave which can stably trap particles close to the top of the cylindrical lens. Based on the Rayleigh approximation, we obtain analytical expressions of optical force acting on a Rayleigh particle placed in the vicinity of the lens. We find that the trap stiffness and trap depth is dependent on the radius of the cylindrical lens, wavelength and polarization of light, and incident angle at the lens–liquid interface.     

Acoustics of an obstacle inside a reactive silencer

The transmission and reflection of sound in a cylindrical duct containing several discontinuities is investigated. A building-block method, which gives the transmission and reflection matrices for a complex system from those of the parts, is applied to bifurcations, sudden area changes with or without extended inlets, and spherical obstacles (which may be lossy). In some cases the solution can be interpreted in terms of multiple reflections. When the lengths between the discontinuities are small it is important to include also non-propagating modes, and this is especially true when the sudden area change is obtained from the area change with extended inlet in the limit of vanishing inlet. For an expansion chamber (a portion of the duct with larger radius) with or without an obstacle and with or without inlets a number of numerical results with variation in frequency are presented. Numerical results for the various building-block elements of the expansion chamber are also considered.