Syntheses of polyamides and polybenzodipyrrolediones from pseudo diacetylphthaloyl chlorides and diamines

Novel diacetylphthalic acids, 2,5-diacetylterephthalic and 4,6-diacetylisophthalic acids, were synthesized starting from pyromellitic dianhydride. These diacids were subsequently converted to the corresponding pseudo diacetylphthaloyl chlorides. The ring-opening polyaddition, followed by dehydrochlorination, of the pseudo diacetylphthaloyl chlorides with aliphatic diamines in a polar aprotic solvent afforded almost quantitatively polyamides having inherent viscosities of 0.3–0.7. The solution polymerization was almost completed within 1 hr at room temperature. These polyamides were soluble in acidic solvents like m-cresol. Subsequent cyclodehydration of the polyamides by heating at 200°C gave insoluble polybenzodipyrrolediones, which underwent weight losses of 10% at around 400°C under nitrogen.     

Aromatic Polyamides of 2,6-Naphthalenedicarboxylic Acid

Wholly aromatic polyamides have been prepared by the interfacial polycondensation of 2,6-naphthalenedicarboxylic acid chloride with m-phenylenediamine. Also, copolyamides with isophthaloyl or terephthaloyl chlorides and the naphthalene diacid chloride were synthesized. The resultant polyamides were amorphous or slightly crystalline as determined by x-ray diffraction, had tensile properties characteristic of hard, strong materials, and were more thermally stable than aromatic polyamides prepared solely from benzene diacid chlorides.     

Regular copolymers derived from bis(2-oxazolines). II. Synthesis of polyamides and polyamide-imides containing oxyethylene linkages

New diamines containing amide and oxyethylene linkages were prepared by reduction of the corresponding dinitro compounds which were obtained by the reaction of p-nitrophenol with arylenebis(2-oxazolines) in dimethylformamide at 130°C. Moderate- to high-molecular-weight polyamides and polyamide-imides containing oxyethylene linkages were prepared by the polycondensation of the diamines with diacid chlorides and tetracarboxylic acid dianhydrides, respectively. The polyamides were soluble in dimethylacetamide containing 5% of lithium chloride and dichloroacetic acid, while the polyamide-imides dissolved only moderately in the latter solvent. Thermogravimetric analysis showed that thermo-oxidative decomposition started at 310–330°C and at around 325°C for the polyamides and polyamide-imides, respectively.     

Synthesis and characterization of Schiff-base-containing polyamides

A series of new Schiff base polyamides（PAs） were synthesized by polycondensation of benzilbisthiosemicarbazone diamine（LH₆） with different commercially available aliphatic and aromatic diacid chlorides. The monomer and all the PAs were characterized by FTIR,¹H-NMR,and elemental analysis.The prepared polyamides showed inherent viscosities in the range of 0.30-0.36 dL/g in DMF at 25℃,indicating their moderate molecular weight.The PAs were completely soluble in aprotic polar solvents such as dimethylformamide（DMF）,N-methylpyrolidone（NMP）, tetrachloroethane（TCE）,dimthylsulfoxide（DMSO） and also in H₂SO₄ and partially soluble in THF,acetone and chloroform at room temperature.Thermal analysis showed that these PAs were practically amorphous and exhibited 10%weight loss above 220℃.     

Substituted rod-like aromatic polyamides: Synthesis and structure-property relations

The synthesis and structure-property relations of a number of novel substituted paralinked aromatic homopolyamides and copolyamides are described. The synthesis of the polyamides was carried out by polycondensation of activated N,N'-bis-(trimethylsilyl) substitued aromatic diamines and aromatic diacid chlorides. In order to improve the solubility and to lower melting temperatures, novel arylsubstituted terephthalic acids moieties, such as p-terphenyl-2,5-dicarboxylic acid and o-terphenyl-2,5-dicarboxylic acid, were used in combination with substituted and noncoplanar diamines. Depending on the chemical structure, polyamides with very high solubility (up to 40% w/w) in polar aprotic solvents such as N,N-dimethylacetamide without the addition of inorganic salts were obtained. Lyotropic liquid crystalline behavior was observed for the first time in polyamides which contain noncoplanar biphenylene units.     

Synthesis and characterization of new soluble aromatic polyamides from diaminotetraphenylimidazolin-2-one and various aromatic dicarboxylic acid chlorides

Novel aromatic polyamides, having inherent viscosities of 0.76-2.31 dL/g, were synthesized by the low temperature solution polycondensation of a new highly phenylated diamine monomer having an imidazolinone group, 1,3-bis(4-aminophenyl)-4,5-diphenylimidazoline-2-one (TPIDA), with various aromatic diacid chlorides. All the polymers were amorphous, and most of the polyamides were readily soluble in organic solvents such as N-methyl–2-pyrrolidone, N,N-dimethylacetamide (DMAc), and m-cresol. Flexible and tough films could be prepared from the DMAc solutions of these soluble aromatic polyamides. The glass transition temperatures and 10% weight loss temperatures under nitrogen of the polyamides were in the range of 275–315°C and 430–505°C, respectively. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of novel aromatic polyamides from 3,4-bis(4-aminophenyl)-2,5-diphenylfuran and aromatic diacid chlorides

A new highly phenylated heterocyclic diamine, 3,4-bis(4-aminophenyl)-2,5-diphenylfuran, was synthesized in three steps from 4–-nitrodeoxybenzoin. The low temperature solution polycondensation of the diamine with various aromatic diacid chlorides afforded tetraphenylfuran-containing aromatic polyamides with inherent viscosities of 0.2–0.8 dL/g. Copolyterephthalamides were obtained from the diamine and 4,4′-oxydianiline. The polyamides were generally soluble in a wide range of solvents that included N,N-dimethylacetamide, N-methyl-2-pyrrolidone, pyridine, and m-cresol. Glass transition temperatures of the polyamides and copolyamides ranged from 302–342°C, and 10% weight loss was observed above 480°C in nitrogen.     

Preparation and properties of fluorine-containing aromatic polyamides from tetrafluorophthaloyl chlorides and aromatic diamines

New fluorine-containing aromatic polyamides with inherent viscosities of 0.4–1.8 dL/g were prepared by the low temperature solution polycondensation of tetrafluoroisophthaloyl and tetrafluoroterephthaloyl chlorides with N,N′-bis(trimethylsilyl)-substituted aromatic diamines. The aromatic polyperfluoroisophthalamides were amorphous polymers with glass transition temperatures around 280°C, whereas the polyperfluoroterephthalamides were crystalline. Most of these aromatic polyamides were soluble in organic solvents, and began to decompose around 330°C in air or nitrogen atmosphere.     

Preparation and properties of polyamides and polyimides derived from 1,3-diaminoadamantane

1,3-Diaminoadamantane (I) was used as a monomer with various aromatic dicarboxylic acyl chlorides and dianhydrides to synthesize polyamides and polyimides, respectively. Polyamides having inherent viscosities of 0.10–0.27 dL/g were prepared by low-temperature solution polycondensation. The polyamides were soluble in a variety of solvents such as N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), pyridine, dioxane, and nitrobenzene. These polyamides had glass transition temperatures in the 179–187°C range and 5% weight loss temperatures occurred at up to 354°C. Polyimides based on diamine I and various aromatic dianhydrides were synthesized by the two-stage procedure that included ring-opening to form polyamic acids, followed by thermal conversion to polyimides. The polyamic acids had inherent viscosities of 0.14–0.38 dL/g. The glass transition temperature of these polyimides were in the 245–303°C range and showed almost no weight loss up to 350°C under air and nitrogen atmosphere. © 1996 John Wiley & Sons, Inc.     

Synthesis and characterization of aromatic polyamides from 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diacid chlorides

Novel, soluble aromatic polyamides and copolyamides containing tetraphenylethylene units were prepared by the low temperature solution polycondensation of 1,1-bis(4-aminophenyl)-2,2-diphenylethylene and aromatic diamines with various aromatic diacid chlorides. Highmolecular-weight polyamides having inherent viscosities of 0.6–1.5 dL/g and number-average molecular weight above 21000 were obtained quantitatively. These polymers were readily soluble in various solvents such as N-methyl-2-pyrrolidone, N,N-dimethylacetamide (DMAc), and dimethyl sulfoxide and gave pale yellow, transparent, flexible films by casting from DMAc solution. The polymers had glass transition temperatures between 290 and 340°C, and started to lose weight around 400°C, with 10% weight loss being recorded at about 470°C in air.     

Synthesis and properties of new soluble N-phenyl–substituted aromatic-aliphatic and all aromatic polyamides derived from 4,4′-dianilinobiphenyl

New N-phenylated aromatic-aliphatic and all aromatic polyamides were prepared by the high-temperature solution polycondensation of 4,4′-dianilinobiphenyl with both aliphatic (methylene chain lengths of 6–11) and aromatic dicarboxylic acid chlorides. All of the aromatic-aliphatic polyamides and the wholly aromatic polyamides exhibited an amorphous nature and good solubility in amide-type and chlorinated hydrocarbon solvents, except for those aromatic polyamides containing p-oriented phenylene or biphenylylene linkages in the backbone; the latter were crystalline and insoluble in organic solvents except m-cresol. The N-phenylated aromatic-aliphatic polyamides and aromatic polyamides had glass transition temperatures in the range of 79–116°C and 207–255°C, respectively, and all the polymers were thermally stable with decomposition temperatures above 400°C in air. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2193–2200, 1998     

Study of kinetics of thermal degradation and to determine the activation energies of polyamides based on s-triazine

A series of ten polyamides was prepared by the high-temperature polycondensation of 4,6-bis(N-(4-(benzoylchloride)amino))-2-(N-phenyl- piperazin-1-yl)-1,3,5-triazine with different aromatic and aliphatic diamines. The synthesized polyamides were analyzed by physico-chemical properties such as solubility, density, viscosity etc. The structure of prepared polyamides was evaluated by ¹H NMR and FTIR spectrum. Thermogravimetric analysis used to study the kinetics of thermal degradation of some synthesized polyamides. Broido, Horowitz & Metzger, Coats Redfern and Chan et al. models were applied to respective thermograms to determine the activation energy (E_a). Activation energy data shows that the polyamides obtained from aromatic diamine has greater stability than the polyamides obtained from aliphatic amine.     

Synthesis and characterization of soluble aromatic polyamides from 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene and aromatic diacid chlorides

New soluble aromatic polyamides with inherent viscosities of 1.0–1.7 dL/g were prepared by the low temperature solution polycondensation of 2,5-bis(4-aminophenyl)—3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic diacid chlorides in N,N-dimethylacetamide. The polyamides and copolyamides are generally soluble in amide-type solvents. They have glass transition temperatures in the range of 280–325°C and showed no weight loss below 390°C on thermogravimetry curves in both air and nitrogen atmospheres.     

Synthesis and characterization of new soluble polyamides derived from 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one

A new oxypyrone diamine, 2,6-bis(4-aminophenyl)-3,5-dimethyltetrahydro-4H-pyran-4-one (DAPP), was prepared from 4-nitrobenzaldehyde and 3-oxa-n-pentane in a two-step reaction with a high yield and a high purity. Aromatic polyamides were obtained from this novel condensation monomer and several diacid chlorides through the conventional low-temperature solution method in N,N-dimethylacetamide. Polycondensation results were consistent with a high reactivity for DAPP because high yields and high molecular weight polyamides were obtained with inherent viscosities up to 1.8 dL/g. The reactivity of DAPP was also estimated with theoretical calculations from computer programs for molecular simulation, with orbital and charge factors considered. The polymers showed improved solubility in organic solvents, relative to conventional wholly aromatic polyamides, and high glass-transition temperatures (from differential scanning calorimetry) over 270 °C. However, the thermal resistance, as estimated by thermogravimetric analysis, was lower than that of conventional aromatic polyamides; nevertheless, decomposition temperatures well beyond 300 °C were observed in nitrogen and air. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1825–1832, 2001     

Synthesis and thermal properties of a new class of high-temperature polyamides from hexahydrobenzodipyrrole

A series of polyamides was synthesized by the interfacial polycondensation of 1,2,3,5,6,7-hexahydrobenzo [1,2-c:4,5-c′] dipyrrole with isophthalic, terephthalic, oxydibenzoic, sebacic and adipic acid chlorides. High molecular weight polymers with inherent viscosities ranging from 0.4 to 2.3 dl/g were obtained. Polymerization with isophthaloyl chloride gave the highest molecular weight polymer in this series. These polyamides melt between 350°C and 475°C, depending on structural differences as determined by differential scanning calorimetry (DSC). Rapid weight loss in these polymers was observed in the range of 350–400°C under thermogravimetric analysis in a nitrogen atmosphere. All these polyamides are susceptible to photooxidative degradation. The results were compared with Nomex polymer poly(1,3-phenylene isophthalamide).     

Optical properties of inherently dissymmetric polyamides

A study of the optical rotatory dispersion (ORD), circular dichroism (CD), and ultraviolet spectra (UV) of polyamides derived from optically active biphenyl acid chlorides, and aromatic, and aliphatic diamines, was made. The optically active monomers were (–)-(S)-2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and (–)-(S)-2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride. The diamines were o-, m-, and p-phenylenediamine, piperazine, trans-2,5-dimethylpiperazine, and 1,2-pyrazolidine. The ORD spectra of the o-phenylenediaminepolyamide taken in different solvents indicated the existence of some ordered structure in the least polar solvent. All other polyamides existed in a random coil conformation in the solvents employed.     

Synthesis Of Ligands Related To The O-Specific Antigen Of Shigella Dysenteriae Type 1.

Abstract

Stereoselective α-D-galactosylation at the position 3 of 4,6-O-substituted derivatives of methyl 2-acetamido-2-deoxy-α-D-glucopyranoside is described. Glycosyl chlorides derived from 3,4,6-tri-O-acetyl-2-O-benzyl- and 2-O-(4-methoxybenzyl)-D-galactopyranose have been used as glycosyl donors. Methyl 2-acetamido-4,6-di-O-acetyl-2-deoxy-3-O-(3,4,6-tri-O-acetyl-α-D-galactopyranosyl)-α-D-glucopyranoside (27) and methyl 2-acetamido-4,6-di-O-benzyl-2-deoxy-3-O-(3,4,6-tri-O-acetyl-α-D-galactopyranosyl)-α-D-glucopyranoside (31) have been prepared.     

Novel polyviologens: Photochromic redox polymers with film-forming properties

Several novel polyamides containing the N,N′-dialkyl-4,4′-dipyridinium (“viologen”) system were made by interfacial condensation of N,N′-bis(aminoalkyl)-4,4,-dipyridinium salts with di-, tri-, or tetrafunctional acid chlorides. These materials are useful redox polymers which turn deeply colored when reduced chemically or electrically, or when exposed to light.     

Preparation and properties of polyamides containing p-terphenyl units

Novel polyamides that contained p-terphenyl units were prepared with inherent viscosities in the range of 0.4–1.7 dL/g by the polycondensation of 4,4″-dichloroformyl-p-terphenyl with aromatic diamines and 4,4″-diamino-p-terphenyl with aromatic dicarbonyl chlorides. Polyamides composed of only paraoriented phenylene units were insoluble in all solvents and showed a high degree of crystallinity. A series of polyamides that contained p-terphenyl units were more thermostable than corresponding polymers with p-phenylene or biphenylene linkages.     

Controlled stereochemistry of polyamides derived from cis/trans‐1,4‐cyclohexanedicarboxylic acid

A series of copolyamides 12.y was synthesized either with y = 6, or 1,4‐cyclohexanedicarboxylic acid (1,4‐CHDA) residue, or a mixture of both. The influence of the synthetic route of 1,4‐CHDA containing polyamides on the obtained cis–trans ratio of the incorporated 1,4‐CHDA was investigated. The use of acid chlorides provided a synthetic route with full control of the cis–trans ratio of the 1,4‐CHDA residue during synthesis, whereas synthesis at elevated pressure and temperature caused isomerization. The content and cis–trans ratio of 1,4‐CHDA in the copolyamides were determined by solution ¹³C NMR spectroscopy. Increasing the degree of partial substitution of the adipic acid by 1,4‐CHDA resulted in an increase in T_m, even for low molar precentages of 1,4‐CHDA. This phenomenon points to isomorphous crystallization of both the 12.6 and 12.CHDA repeating units. The mps of the synthesized polyamides were independent of the initial cis–trans ratio of 1,4‐CHDA, provided that the samples were annealed at 300 °C before DSC analysis. The polyamides exhibited a different melting pattern depending on the 1,4‐CHDA content. At a low a 1,4‐CHDA content a net exothermic recrystallization occurred during melting, whereas at higher contents of 1,4‐CHDA this recrystallization occurs to a lesser extent, and two separate melting areas are observed. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 833–840, 2001