Synthesis, characterization, X-ray structural analysis and study of oxidative properties of a chlorochromate(VI) complex with benzyltriphenylphosphonium cation

Benzyltriphenylphosphonium chlorochromate(VI), [(PhCH₂)Ph₃P][CrO₃Cl], BTriPPCC, is easily synthesized in a nearly quantitative yield by direct reaction of Cr(VI) oxide and benzyltriphenylphosphonium chloride. The complex was characterized by physico-chemical and spectroscopic methods. The use of phosphonium counter ion, improves the quality of the BTriPPCC crystals. The compound was indeed crystallized and structurally characterized by X-ray diffraction at 170(2) K. This compound is a versatile reagent for the efficient and selective oxidation of organic substrates, in particular of alcohols to the corresponding aldehydes or ketones, in mild conditions. Due to the stability and solubility of BTriPPCC, the reactions can be performed at room temperature and the separation of the products is easy.     

Quinoxalinium Fluorochromate (QxFC): A New and Efficient Reagent for the Oxidation of Alcohols in Solution,Under Solvent-Free Conditions and Microwave Irradiation

The new mild oxidizing agent, quinoxalinium fluorochromate (QxFC), has been easily prepared by reacting quinoxaline with an aqueous solution of CrO ₃ and HF. This reagent is suitable for oxidizing various primary and secondary alcohols to their corresponding carbonyl compounds and anthracene to antraquinone. The reactions were carried out in solution, under solvent-free conditions and microwave irradiation. The results show that the rates of the reactions and the yields are usually highest under microwave irradiation.     

Tributylammonium Halochromates/silica Gel:Simple Reagents for Oxidative Coupling of Thiols to Symmetrical Disulfides

New orange solid tributylammonium halochromates, (C₄H₉)₃N⁺CrO₃X^?, TBAXC (X=F, Cl) are easily synthesized by the reaction of tributylammonium fluoride and chloride with CrO₃ in a 1:1 molar ratio in the presence of HF and HCl. Tributylammonium halochromates(VI) are versatile reagent for the effective and selective oxidation of organic substrates. Silica gel supported TBAFC and TBACC are versatile reagents for the effective and selective oxidation of organic substrates, in particular, thiols, under mild conditions. Considerable improvements are observed in the presence of the absorbent, making the work‐up much more convenient.     

Chemoselective Oxidation of Benzylic Alcohols with Solid Supported CrO3/TBHP Under Microwave Irradiation

The efficient use of microwave energy coupled with dry media technique for the oxidation of benzylic alcohols using catalytic CrO₃ and TBHP has been effectively projected     

Ethylenebis( N -methylimidazolium) Chlorochromate ( EBMICC ): An Efficient and Selective Reagent for the Oxidation of Thiols to Disulfides

Ethylenebis(N-methylimidazolium) chlorochromate was prepared by addition of N-methylimidazole to 1,2-dibromoethane to form the corresponding dibromide salt and subsequent treatment of this salt with CrO₃ in 6N HCl solution. It is a stable yellow-orange solid, which oxidized thiols to the corresponding disulfides at room temperature. Selective oxidation of thiols in the presence of sulfides and hydroxyl groups was also achieved with this reagent.     

Studies on Substituted Derivatives of Polyaniline: Effect of Polymerization Conditions on Electrical Conductivity

Abstract

Polyaniline, poly(o-methoxyaniline)and poly(N-phenylaniline) were synthesized chemically under different polymerization conditions by peroxodisulphate oxidation in HCl and in a mixture of HCl and CH₃CN. The polymer prepared at 0°C, monomer-oxidant ratio 1:1.15 and a strong acidic medium, has the least bandgap and maximum electrical conductivity. The electrical conductivity depends on degree of oxidation and protonation. The bulky substituents increase the torsion angle and hence disorder causes the decrease in the electrical conductivity of polymer.     

Ethylenebis(N‐Methylimidazolium) Chlorochromate (EBMICC): A New Selective and Mild Reagent for Oxidation of Alcohols,Hydroquinones and Trimethylsilyl Ethers

The ethylenebis(N‐methylimidazolium) chlorochromate was prepared by addition of N‐methylimidazole to 1,2‐dibromoethane to form the corresponding dibromide salt and subsequent treatment of this salt with CrO₃ in 6N HCl solution. It is a stable yellow‐orange solid which selectively oxidized benzylic and allylic alcohols, hydroquinones and trimethylsilyl ethers in refluxing acetonitrile. Oxidation of alcohols was also examined under solvent‐free conditions and showed much better yields of the corresponding carbonyls in a very short reaction time when compared with the conventional method.     

Ethylenebis(<Emphasis Type="Italic">N</Emphasis>-methylimidazolium) Chlorochromate (<Emphasis Type="Italic">EBMICC</Emphasis>): An Efficient and Selective Reagent for the Oxidation of Thiols to Disulfides

Summary. Ethylenebis(N-methylimidazolium) chlorochromate was prepared by addition of N-methylimidazole to 1,2-dibromoethane to form the corresponding dibromide salt and subsequent treatment of this salt with CrO₃ in 6N HCl solution. It is a stable yellow-orange solid, which oxidized thiols to the corresponding disulfides at room temperature. Selective oxidation of thiols in the presence of sulfides and hydroxyl groups was also achieved with this reagent.     

A New Oxidative Conversion of Carbohydrate Benzyl Ethers to Benzoyl Esters with RuCl3-NaIO

Abstract

The benzyl group is often used in organic synthesis, especially in carbohydrate chemistry, as one of the most useful of the hydroxyl protecting groups. Benzyl ethers are stable to basic conditions and the benzyl group is removed easily by hydrogenolysis or under Birch reduction conditions. Alternatively, the benzyl ether group is oxidized to benzoyl ester and removed under basic conditions. A few oxidation methods have been reported using more than a stoichiometric amount of chromium reagents such as CrO₃-H₂SO₄ (Jones reagent)¹ or CrO₃-AcOH₂. Here we report a new and mild oxidation of benzyl ether to benzoyl ester with a catalytic amount of RuO₄ derived from RuCl₃ and NaIO₄. This method has proved effective in removing benzyl ether groups chemoselectively in the presence of benzylidene acetal and benzyl glycosidic functions.     

ZEOLITE-SUPPORTED CHROMIUM(VI) OXIDE: A MILD,EFFICIENT, AND INEXPENSIVE REAGENT FOR OXIDATIVE DEPROTECTION OF TRIMETHYLSILYL ETHERS UNDER MICROWAVE IRRADIATION

Primary and secondary trimethylsilyl ethers are effeciently converted to the corresponding carbonyl compounds using HZSM-5 zeolite-supported CrO ₃ under microwave irradiation in solventless system.     

Synthesis,Properties, and Structures of Chromium(VI) and Chromium(V) Complexes with Heterocyclic Nitrogen Ligands

The reaction of CrO₂Cl₂ with 2, 2′‐bipyridyl or 1, 10‐phenanthroline (diimine) in CCl₄ or anhydrous CH₃CO₂H solution, produces orange‐brown diamagnetic [CrO₂Cl₂(diimine)]. The X‐ray structure of [CrO₂Cl₂(2, 2′‐bipy)] shows a six‐coordinate central chromium(VI) atom with cis‐dioxo groups trans to the diimine. In contrast, the diimines react with CrO₃ in CH₃CO₂H / conc. aqueous HCl to form bright red paramagnetic Cr^V complexes, [CrOCl₃(diimine)]. The X‐ray structure of [CrOCl₃(2, 2′‐bipy)] shows a six‐coordinate central chromium atom with mer‐chlorines and the diimine trans to O/Cl. The addition of [2, 2‐bipyH₂]Cl₂ to a solution of CrO₃ in CH₃CO₂H saturated with HCl gas, produces the Cr^V anion [2, 2′‐bipyH₂][CrOCl₄]Cl, which loses HCl on heating in vacuo to form [CrOCl₃(2, 2′‐bipy)]. IR, UV/Vis, and ¹H NMR spectra (Cr^VI only) are reported for the new complexes. Attempts to extend these routes to oxygen donor ligands, including ethers and phosphine oxides, were unsuccessful. The diimine complexes are the first structurally autheticated adducts of chromium(VI) and (V) oxide‐chlorides with neutral ligands.     

Synthesis,characterization, X-ray structural analysis and study of oxidative properties of propyltriphenylphosphonium bromochromate

The complex of propyltriphenylphosphonium bromochromate(VI), PrPh₃P[CrO₃Br] is easily synthesized in nearly quantitative yield using a direct reaction of chromium(VI) oxide and propyltriphenylphosphonium bromide. This compound is a versatile reagent for the efficient and selective oxidation of organic substrates, in particular for alcohols to their corresponding aldehydes or ketones, under mild conditions. This compound was characterized by IR, UV/Visible, ¹³C-n.m.r. and ¹H-n.m.r. techniques. It crystallized in the monoclinic form and its crystal and molecular structure have been determined by X-ray crystallography.     

Catalytic activity and physicochemical properties of Ni-Au/Al<Subscript>3</Subscript>CrO<Subscript>6</Subscript> system for partial oxidation of methane to synthesis gas

This work is focused on the role of gold and Al₃CrO₆ support for physicochemical properties, and catalytic activity of supported nickel catalysts in partial oxidation of methane (POM). Catalysts, containing 5% Ni and 5% Ni-2% Au active phases dispersed on mono- (Al₂O₃, Cr₂O₃) and bi-oxide Al₃CrO₆ support, were investigated by TPR, BET and XRD methods, and the activity tests in POM reaction were carried out. Bimetallic Ni-Au catalysts dispersed on Al₃CrO₆ support remained highly stable and active. The amorphous binary oxide Al₃CrO₆ can stabilize considerable amount of Cr⁴⁺, Cr⁵⁺, and Cr⁶⁺ species in Ni-Au/Al₃CrO₆ catalyst network during its calcination in the air. Nickel supported on binary oxide Ni/Al₃CrO₆ can form Ni(III)CrO₃ bi-oxide phase in reductive conditions. During TPR H2 reduction of Ni-Au/Al₃CrO₆ catalyst chromium(II) oxide Cr(II)O phase is observed. After POM reaction the existence of bimetallic Au-Ni alloy was experimentally confirmed on mono-oxide Al₂O₃ support surface, but its formation was not identified on bioxide Al₃CrO₆ support. Published in Russian in Kinetika i Kataliz, 2009, Vol. 50, No. 1, pp. 149–156. The article is published in the original. Based on a report at the VII Russ. Conf. on Mechanisms of Catalytic Reactions (with international participation), St. Petersburg, July 2–8, 2006.     

Application of microwave digestion to the preparation of sediment samples for arsenic speciation

Several extraction procedures are described allowing arsenic speciation in sediments. The extraction of organometallic compounds such as dimethylarsinic acid or monomethylarsonic acid is quite simple since these compounds are stable in the different extraction media (HCl/ HNO₃, H₃PO₄, ammonium oxalate) and are easily released independent of the extraction mode (magnetic stirring or microwave solubilization). Extraction yields are higher than 96% for these two arsenic forms. An HCl/HNO₃ microwave solubilization procedure allows the quantitative solubilization of mineral arsenic, but the differentiation between the two oxidation states is not possible owing to the oxidation of As(III) to As(V). Extractions with orthophosphoric acid or ammonium oxalate allow the solubilization of mineral arsenic with extraction yields ranging from 90 to 95% and the differentiation between As(III) and As(V). Nevertheless, the amount of As(III) is underestimated owing to its partial oxidation. The usefulness and advantages of microwave solubilization compared with conventional extraction procedures are discussed. Received: 17 May 1996 / Revised: 19 September 1996 / Accepted: 25 September 1996     

Application of microwave digestion to the preparation of sediment samples for arsenic speciation

Several extraction procedures are described allowing arsenic speciation in sediments. The extraction of organometallic compounds such as dimethylarsinic acid or monomethylarsonic acid is quite simple since these compounds are stable in the different extraction media (HCl/ HNO₃, H₃PO₄, ammonium oxalate) and are easily released independent of the extraction mode (magnetic stirring or microwave solubilization). Extraction yields are higher than 96% for these two arsenic forms. An HCl/HNO₃ microwave solubilization procedure allows the quantitative solubilization of mineral arsenic, but the differentiation between the two oxidation states is not possible owing to the oxidation of As(III) to As(V). Extractions with orthophosphoric acid or ammonium oxalate allow the solubilization of mineral arsenic with extraction yields ranging from 90 to 95% and the differentiation between As(III) and As(V). Nevertheless, the amount of As(III) is underestimated owing to its partial oxidation. The usefulness and advantages of microwave solubilization compared with conventional extraction procedures are discussed. Received: 17 May 1996 / Revised: 19 September 1996 / Accepted: 25 September 1996     

Influence of heat treatment conditions on the physicochemical and catalytic properties of a chromium-containing catalyst for tetrachloroethylene hydrofluorination to pentafluoroethane

The physicochemical properties of coprecipitated 95% Cr₂O₃-5% Al₂O₃ oxide systems obtained by heat treatment of the precursor in nitrogen and air between 110 and 600°C and their influence on the catalytic activity in tetrachloroethylene hydrofluorination were studied by thermal and X-ray diffraction analyses, diffuse reflectance spectroscopy, and specific surface are measurements. The CrO_1.9 compounds are more active than CrO_1.5, but their preparation in the finely divided state is difficult because of the high exothermicity of the oxidation stage, which results in the decomposition of the oxides CrO_1.9 and CrO_1.5 followed by the crystallization and sintering of the decomposition products. Fine-powder and highly active chromium-containing oxides with CrO_1.9 stoichiometry can be obtained by two-stage heating of hydroxides first in nitrogen and then in air at comparatively low temperatures.     

High oxidation state transition metal perfluoroglutarates

The reaction of bifunctional perfluorinated acid anhydrides with CrO₃, K₂CrO₄, and Na₂MoO₄ results in the formation of new high oxidation state transition metal perfluoroglutarates.     

Carbon–carbon bond fission on oxidation of primary alcohols to carboxylic acids

α-Carbon–carbon bond cleavage is shown to be a general side reaction accompanying the oxidation of unbranched primary alcohols to the corresponding carboxylic acids using HNO₃, CrO₃/H₂SO₄/H₂O/acetone, CrO₃/CH₃COOH, PDC/DMF, H₅IO₆/CrO₃, KMnO₄/H⁺, KMnO₄/HO^?, NiCl₂/NaClO, TEMPO/PhI(OAc)₂. Therefore, the product formed is always contaminated with a carboxylic acid containing one carbon atom less. Systems such as PhI(OAc)₂/TEMPO or H₅IO₆/CrO₃/CH₃CN reduce to a minimum the content of this impurity. Temperature, the order of reagent addition, and additives such as oxalic acid or cerium salts produce a profound effect on the formation of the undesirable impurity during the Jones oxidation of primary alcohols.     

One-Pot Oxidative Synthesis of Substituted Quinolines from Alcohols and Arylamines Catalyzed by Fe(CrO<Subscript>2</Subscript>)<Subscript>2</Subscript> in Water Medium

One-pot tandem synthesis was developed for substituted quinolines (in up to 97% yields) involving a selective catalytic oxidation of primary amines to aldehydes and their condensation with arylamines under the action of a dispersion of Fe(CrO₂)₂ and water solution of H₂O₂ at room temperature. The stage of catalytic oxidation of alcohols was accelerated by photoactivation. A presumable mechanism of the photoactivated tandem synthesis of 2-methylquinoline was suggested. Catalyst Fe(CrO₂)₂ was prepared by photochemical synthesis.     

Reduction of Ruthenium(IV) to Ruthenium(III) in Aqueous Alcohol Solutions of Hydrochloric Acid under Microwave Radiation

The behavior of a kinetically inert form of ruthenium(IV), the -oxo-bis-[pentachlororuthenate(IV)] ion [Ru₂OCl₁₀]^4–, was studied in aqueous alcohol solutions of hydrochloric acid under microwave radiation and upon the heating of the solutions. The conditions were selected for the quantitative reduction of ruthenium(IV) to ruthenium(III) with alcohols in 0.6–10 M HCl solutions in a microwave field. The maximum time it takes to reduce ruthenium(IV) under microwave radiation (30 min) was an order of magnitude shorter than that for heating the solutions in a boiling water bath. Regardless of the type of alcohol, the most rapid reduction of ruthenium(IV) was observed at the boundaries of the studied range of hydrochloric acid concentrations. It was found that, under microwave radiation, thermal effects were the driving force of the process in a 0.6 M HCl solution at 98°C, whereas, in 8–10 M HCl solutions, the contributions of nonthermal and thermal effects were comparable. It was shown that the reducing ability of saturated monoatomic C₁–C₄ alcohols increases with the number of carbon atoms and is also due to specific features of microwave radiation.