ATP适体接枝Fe3O4纳米粒子的制备及化学发光酶检测应用

制备了油酸修饰的Fe₃O₄纳米粒子,利用盐酸多巴胺对其表面进行氨基化改性,制得水分散性良好的Fe₃O₄纳米粒子,用X射线衍射、透射电镜、傅里叶变换红外光谱仪、振动样品磁强计和紫外-可见吸收光谱进行表征。随后,将氨基修饰的三磷酸腺苷（ATP）适体接枝到Fe₃O₄纳米粒子上,结合荧光素酶化学发光法进行ATP的定量检测,并应用于市售酸奶中乳酸菌ATP含量的检测,其灵敏度高、重现性好。各项实验结果表明所制备的Fe₃O₄纳米粒子是一种分散性好、易分离的载体,其粒径均一、稳定、磁性强、与适体结合性能好,拓展了Fe₃O₄纳米粒子在分析检测领域的应用。     

ATP适体接枝Fe_3O_4纳米粒子的制备及化学发光酶检测应用

制备了油酸修饰的Fe_3O_4纳米粒子,利用盐酸多巴胺对其表面进行氨基化改性,制得水分散性良好的Fe_3O_4纳米粒子,用X射线衍射、透射电镜、傅里叶变换红外光谱仪、振动样品磁强计和紫外-可见吸收光谱进行表征。随后,将氨基修饰的三磷酸腺苷(ATP)适体接枝到Fe_3O_4纳米粒子上,结合荧光素酶化学发光法进行ATP的定量检测,并应用于市售酸奶中乳酸菌ATP含量的检测,其灵敏度高、重现性好。各项实验结果表明所制备的Fe_3O_4纳米粒子是一种分散性好、易分离的载体,其粒径均一、稳定、磁性强、与适体结合性能好,拓展了Fe_3O_4纳米粒子在分析检测领域的应用。     

New optically active amido-phosphinite ligand and ruthenium complexes

The hydrogenation of acetoacetanilide in the presence of optically active ruthenium catalysts leads to 3-hydroxy-N-phenylbutanamide in good yield and high enantioselectivity (ee>95%). Its direct phosphinylation with chlorodiphenylphosphine affords a new bifunctional amido-phosphinite ligand that can easily be coordinated to [(arene)RuCl₂] and to the CpRuCl(PPh₃) moiety with very good stereoselectivity from CpRuCl(PPh₃)₂.     

Catalytic oxidation of urazoles and bis-urazoles to their corresponding triazolinediones using aluminium nitrate and a catalytic amount of silica sulfuric acid

Abstract  

A simple and efficient catalytic oxidation of urazoles and a bis-urazole to the corresponding triazolinediones by treatment with Al(NO₃)₃.9H₂O in the presence of a catalytic amount of silica sulfuric acid is described. A good range of urazole derivatives was selectively oxidized in CH₂Cl₂ at room temperature in good to excellent yields.     

Synthesis,Structural Characterization,and Catalytic Activity of Scandium,Samarium, and Dysprosium Complexes Supported by Tris(pyrrolyl‐α‐methyl)amine Ligand

The synthesis, structures and catalytic activities of three organolanthanide complexes supported by the H₃tpa ligand (H₃tpa = tris(pyrrolyl‐α‐methyl) amine) are described. Treatment of H₃tpa with one equivalent of Ln[N(SiMe₃)₂]₃ (Ln = Sc, Sm, Dy) in THF gives, after recrystallization from toluene/THF solution, Sc(tpa)(THF)₂ ( 1 ), Sm(tpa)(THF)₃ ( 2 ) and Dy(tpa)(THF)₃ ( 3 ) in good yields. The structures of complexes 1 – 3 were determined by single‐crystal X‐ray diffraction and elemental analysis. Complexes 2 and 3 exhibited good catalytic activity for the polymerization of ?‐caprolactone.     

Nano lithium aluminate filler incorporating gel lithium triflate polymer composite: Preparation,characterization and application as an electrolyte in lithium ion batteries

Gel polymer composites electrolytes containing nano LiAlO₂ as filler were prepared using a solution cast technique and characterized using different techniques such as X-ray diffraction (XRD), thermal analysis (TG, DSC), Fourier transform infra – red spectroscopy (FT-IR) and scanning electron microscope (SEM). X-ray diffraction analysis showed the effect of lithium tri fluoro methane sulphonate (LiCF₃SO₃), poly vinyl acetate (PVAc) and nano lithium aluminate (LiAlO₂) on the crystalline structure of the poly vinylidene fluoride –co– hexa fluoro propylene (PVDF-co-HFP) matrix containing ethylene carbonate (EC) and diethyl carbonate (DEC) as plasticizers. FT-IR analysis confirmed both the good dissolution of the LiCF₃SO₃ salt and the good interaction of the nano LiAlO₂ filler with the polymer matrix. TG analysis showed the good thermal stability of the LiAlO₂ samples compared to the free one. Also, addition of nano LiAlO₂ filler enhanced the conductivity value of the polymer composites electrolytes. The sample containing 2 wt% of LiAlO₂ showed the highest conductivity value, 4.98 × 10⁻³ Ω ⁻¹ cm⁻¹ at room temperature, with good thermal stability behavior (T_d = 362 °C). This good conductive and thermally stable polymer nano composite electrolyte was evaluated as a promising membrane for lithium ion batteries application.     

Alkali Metal and Organo Group‐14 Element Ferrocenecarbo­selenoates: Synthesis and Structures

Lithium, sodium, and potassium ferrocenecarboselenoates were synthesized in good yields by the reaction of ferrocenoyl chloride with the corresponding metal selenides. In air, the saltsquickly oxidized to give diferrocenoyl diselenide. The salts readily reacted with alkyl and organo‐germanium, ‐tin and ‐lead halides to give the corresponding Se‐alkyl and Se‐organo Group‐14 element ferrocenecarboselenoates [(FcCOSe)_xMPh_4–x (M = Ge, Sn, Pb; x = 1–3) in moderate to good yields. In contrast, the reaction of the sodium and potassium salts with trimethylsilyl chloride led to O‐trimethylsilyl ferrocenecarboselenoate FcCSeOSiMe₃. Treatment of the O‐silyl ester with RbF and CsF led to rubidium and cesium ferrocenecarboselenoates, respectively, in good yields. The structures of FcCOSetBu, (FcCOSe)₂SnPh₂, and FcCOSePbPh₃ were revealed by X‐ray molecular structure analysis.     

Direct Trifluoromethylthiolation of Unactivated C(sp3)H Using Silver(I) Trifluoromethanethiolate and Potassium Persulfate

A practical and efficient method for the direct trifluoromethylthiolation of unactivated C(sp³)? H bonds by AgSCF₃/K₂S₂O₈ under mild conditions is described. The reaction has a good functional‐group tolerance and good selectivity. Initial mechanistic investigations indicate that the reaction may involve a radical process in which K₂S₂O₈ plays key roles in both the activation of the C(sp³)? H bond and the oxidation of AgSCF₃.     

Binderless Solution Processed Zn Doped Co3O4 Film on FTO for Rapid and Selective Non‐enzymatic Glucose Detection

A simple solution based deposition process has been used to fabricate Zn doped Co₃O₄ electrode as an electrocatalyst for non‐enzymatic oxidation of glucose. XRD, HRTEM, SEM, EELS, AFM, EIS was used to characterise the electrode. The addition of Zn as dopant on Co₃O₄ resulted in enhanced electrochemical performance of Zn:Co₃O₄ material compared to pristine Co₃O₄ due to increased charge transferability. The as prepared electrode showed fast response (<7 s) time, good sensitivity (193 μA mM⁻¹ cm⁻²) in the linear range of 5 μM–0.62 mM, good selectivity towards glucose at a relatively lower applied potential of +0.52 V in 0.1 M NaOH solution. A detection limit of ∼2 μM was measured for the Zn:Co₃O₄ electrode. The applied fabrication method resulted in good inter and intra electrode reproducibility as was shown by the lower relative standard deviation values (R.S.D). The electrode retained 70 % of initial current response after 30 days. Although the as prepared Zn:Co₃O₄ electrodes did not result in highest reported sensitivity, and lowest limit of detection; the ease of fabrication and scalability of production, good inter and intra electrode reproducibility makes it a potential candidate for commercial application as glucose sensor.     

Regio‐ and Stereoselective Reductive Coupling of Bicyclic Alkenes with Propiolates Catalyzed by Nickel Complexes: A Novel Route to Functionalized 1,2‐Dihydroarenes and γ‐Lactones

7‐Oxabenzonorbornadienes derivatives 1 a – d underwent reductive coupling with alkyl propiolates CH₃C?CCO₂CH₃ ( 2 a ), PhC?CCO₂Et ( 2 b ), CH₃(CH₂)₃C?CCO₂CH₃ ( 2 c ), CH₃(CH₂)₄C?CCO₂CH₃ ( 2 d ), TMSC?CCO₂Et ( 2 e ), (CH₃)₃C?CCO₂CH₃ ( 2 f ) and HC?CCO₂Et ( 2 g ) in the presence of [NiBr₂(dppe)] (dppe=Ph₂PCH₂CH₂PPh₂), H₂O and zinc powder in acetonitrile at room temperature to afford the corresponding 2alkenyl‐1,2‐dihydronapthalen‐1‐ol derivatives 3 a – n with remarkable regio‐ and diastereoselectivity in good to excellent yields. Similarly, the reaction of 7azabenzonorbornadienes derivative 1 e with propiolates 2 a, b and d proceeded smoothly to afford reductive coupling products 2alkenyl‐1,2‐dihydronapthalene carbamates 3 o – p in good yields with high regio‐ and stereoselectivity. This nickel‐catalyzed reductive coupling can be further extended to the reaction of 7oxabenzonorbornene derivatives. Thus, 5,6‐di(methoxymethyl)‐7‐oxabicyclo[2.2.1]hept‐2‐ene ( 4 ) reacted with 2 a and 2 d to furnish cyclohexenol derivatives bearing four cis substituents 5 a and b in 81 and 84 % yield, respectively. In contrast to the results of 4 with 2 , the reaction of dimethyl 7oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxylate ( 6 ) with propiolates 2 a – d afforded the corresponding reductive coupling/cyclization products, bicyclo[3.2.1]γ‐lactones 7 a – d in good yields. The reaction provides a convenient one‐pot synthesis of γ‐lactones with remarkably high regio‐ and stereoselectivity.     

Synthesis,structure, and characterization of picolyl- and benzyl-linked biphenyl palladium N-heterocyclic carbene complexes and their catalytic activity in acylative cross-coupling reactions

N-heterocyclic carbene ligands with picolyl (L¹H₂Br₂, L³H₂Br₂) and benzyl (L²H₂Br₂, L⁴H₂Br₂) linked biphenyl backbone were synthesized and characterized. Their palladium(II) complexes [PdL¹]Br₂ ( 1 ), [PdL²Br₂] ( 2 ), [PdL³]Br₂ ( 3 ), and [PdL⁴Br₂] ( 4 ) were synthesized by direct method using Pd(OAc)₂. All complexes ( 1 – 4 ) were characterized by CHN analysis, electrospray ionization-MS, nuclear magnetic resonance, and single-crystal X-ray diffraction. Molecular structures confirm the distorted square planar geometry around the Pd(II) center. All of them showed good catalytic activity in acylative Suzuki cross coupling of phenyl boronic acid with benzoyl chloride to afford benzophenone in good yields.     

Synthesis and Biological Studies on (KLAKLAK)2-NH2 Analog Containing Unnatural Amino Acid β-Ala and Conjugates with Second Pharmacophore

(1) Background: Peptides are good candidates for anticancer drugs due to their natural existence in the body and lack of secondary effects. (KLAKLAK)₂ is an antimicrobial peptide that also shows good anticancer properties. (2) Methods: The Solid Phase Peptide Synthesis (Fmoc-strategy) was used for the synthesis of target molecules, analogs of (KLAKLAK)₂-NH₂. The purity of all compounds was monitored by HPLC, and their structures were proven using mass spectrometry. Cytotoxicity and antiproliferative effects were studied using 3T3 NRU and MTT tests, respectively. For determination of antimicrobial activity, the disc-diffusion method was used. Hydrolytic stability at three pH values, which mimic the physiological pH in the body, was investigated by means of the HPLC technique. (3) Results: A good selective index against MCF-7 tumor cell lines, combined with good cytotoxicity and antiproliferative properties, was revealed for conjugates NphtG-(KLAKLAK)₂-NH₂ and Caf-(KLAKLAK)₂-NH₂. The same compounds showed very good antifungal properties and complete hydrolytic stability for 72 h. The compound Caf-(KLβ-AKLβ-AK)₂-NH₂ containing β-Ala in its structures exhibited good antimicrobial activity against Escherichia coli K12 407 and Bacillus subtilis 3562, in combination with very good antiproliferative and cytotoxic properties, as well as hydrolytic stability. (4) Conclusions: The obtained results reveal that all synthesized conjugates could be useful for medical practice as anticancer or antimicrobial agents.     

Determination of Vitamin D3 and 25-Hydroxyvitamin D3 Using Liquid Chromatography with Amperometric Detection

Abstract

The electrochemical behaviour of vitamin D₃ and 25-hydroxyvitamin D₃ (25-OH D₃) in a high performance liquid chromatography system using amperometric detection is described. Separation is carried out using a C18 reversed-phase column and the optimum mobile phase was a 0.1 M LiClO₄ solution in methanol-water (97:3, v/v) at a flow rate of 1.25 ml/min. 25-OH D₃ and vitamin D₃ were eluted with good resolution at retention times of 3 and 6 minutes respectively, and determined by amperometric detection with a glassy carbon electrode at + 1.050 V (vs Ag/AgCl). Calibration graphs for both substances showed good linearity when amounts of vitamin D₃ between 18 and 312 ng and 27 and 412 ng of 25-OH D₃ were injected. Detection limits of 8 ng (vitamin D₃) and 25 ng (25-OH D₃); relative standard deviations of 3.2% (vitamin D₃) and 5.8% (25-OH D₃) were obtained.     

LiMII(IO3)3 (MII=Zn and Cd): Two Promising Nonlinear Optical Crystals Derived from a Tunable Structure Model of α‐LiIO3

Excellent nonlinear optical materials simultaneously meet the requirements of large SHG response, phase‐matching capability, wide transparency windows, considerable energy band‐gap, good thermal stability and structure stability. Herein, two new promising nonlinear optical (NLO) crystals LiM^II(IO₃)₃ (M^II=Zn and Cd) are rationally designed by the aliovalent substitution strategy from the commercialized α‐LiIO₃ with the perfect parallel alignment of IO₃ groups. Compared with parent α‐LiIO₃ and related A^I₂M^IV(IO₃)₆, the title compounds exhibit more stable covalent 3D structure, and overcome the racemic twinning problem of A^I₂M^IV(IO₃)₆. More importantly, both compounds inherit NLO‐favorable structure merits of α‐LiIO₃ and show larger SHG response (≈14× and ≈12×KDP), shorter absorption edge (294 and 297 nm) with wider energy band‐gap (4.21 and 4.18 eV), good thermal stability (460 and 430 °C), phase‐matching behaviors, wider optical transparency window and good structure stability, achieving an excellent balance of NLO properties.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

Palladium-catalyzed highly regioselective 2-arylation of 2,x-dibromopyridines and its application in the efficient synthesis of a 17β-HSD1 inhibitor

2,3- and 2,5-Dibromopyridines reacted with arylboronic acids, catalyzed by Pd(OAc)₂/PPh₃ in the presence of K₂CO₃ in CH₃CN/MeOH (2:1) at 50 °C for 24 h, to afford 2-arylpyridines in good to high yields, while 2,4-dibromopyridine reacted with arylboronic acid pinacol esters, catalyzed by Pd(OAc)₂/PPh₃ in the presence of KOH in CH₃CN at 70 °C for 24 h, to afford 2-arylpyridines in good to high yields. To expand this methodology, a 17β-HSD1 inhibitor was synthesized in good yield.     

Detailed studies on the reduction of aliphatic 3-, 4-, 6-, and 13-oximino esters: Synthesis of novel isomeric amino esters,oximino alcohols,and amino alcohols

The preparation of novel 3-, 4-, 6-, and 13-amino-tetradecanoic acid methyl esters (2a–d) obtained by the reduction of 3-, 4-, 6-, and 13-oximino-tetradecanoic acid methyl esters (1a–d), was investigated. Oximino esters were reduced to afford the corresponding amino esters using NaBH₄–ZrCl₄ reducing system with good yields (58–82%). However, the reduction of oximino esters with LiAlH₄ and BH₃. Tetrahydrofuran gave the corresponding novel 3-, 4-, 6-, and 13-oximino alcohols (3a–d), and 3-, 4-, 6-, and 13-amino alcohols (4a–d) respectively with good chemical yields.     

Ruthenium and enzyme-catalyzed dynamic kinetic resolution of alcohols

Ruthenium acts as a good catalyst for the racemization reaction of secondary alcohols and amines. Ruthenium-catalyzed racemization is coupled with enzymatic kinetic resolution to prepare chiral compounds in 100% theoretical yield. Ten ruthenium complexes (1–10) act as a good catalyst the for racemization reaction and are also compatible with DKR process. Two other ruthenium complexes [RuCl₂(PPh₃)₃] and [Cp^*RuCl(COD)] are active for racemization reaction but their successful compatibility with DKR has not yet been reported. Ru/γ-Al₂O₃ and Ru–HAP are the heterogeneous catalysts used for the racemization reaction. They have also not been employed for DKR process. Polymer supported ruthenium is employed as a reusable racemization catalyst for aerobic DKR of alcohols.     

Design and preparation of magnetic mesoporous melamine–formaldehyde resin: A novel material for pre‐concentration and determination of silver

Using commercially available melamine and formaldehyde as the starting materials, a magnetic mesoporous melamine–formaldehyde resin (MMF@Fe₃O₄) possessing large surface area was prepared via a simple method and could be used as an efficient adsorbent for magnetic solid‐phase extraction. Compared with the traditional synthetic methods of MMF@Fe₃O₄, this approach is easily operated under mild conditions, is time‐saving and environmentally friendly, and can produce the material in high yields. The as‐prepared MMF@Fe₃O₄ possesses good adsorption capacity and selectivity for silver ions. The affecting factors such as pH, amount of MMF@Fe₃O₄, extraction time, desorption solvent, eluent concentration and sample volume were systematically investigated and optimized. Under the optimized conditions, the material exhibited a good response to silver ions at concentrations in the range 2.0–200 μg l^?1 with good linearity (r² = 0.9982), while the limit of detection was found to be 0.12 μg l^?1. The material was successfully applied to the determination of silver in a variety of water samples.     

A pyridine-containing ruthenium–indenylidene complex: Synthesis and activity in ring-closing metathesis

The reaction of Cl₂Ru(PCy₃)₂(3-phenylindenylidene) with excess pyridine leads to the new pyridine-containing ruthenium-based complex: Cl₂Ru(PCy₃)(Py)₂(3-phenylindenylidene) in good yield. This catalyst has been fully characterized and tested in ring-closing metathesis. Its moderate activity has been examined by kinetic studies using several substrates and different reaction conditions.