4-Aminophenyl Diphenylphosphinite (APDPP) as a Heterogeneous and Acid Scavenger Reagent for Thiocyantion or Isothiocyanation of Alcohols and Protected Alcohols

4-Aminophenyl diphenylphosphinite (APDPP) as a heterogeneous phosphinite reagent is used for the efficient conversion of alcohols, trimethylsilyl- and tetrahydropyranyl ethers, α -hydroxy phosphonates, and α -trimethylsilyloxyphosphonates to their corresponding thiocyanates or isothiocyanates in the presence of Br ₂ and NH ₄ SCN.     

A novel and convenient method for synthesis of carbamoyl and thiocarbamoyl phosphonates

A simple, efficient, and general method has been developed for the synthesis of carbamoyl and thiocarbamoyl phosphonic esters using CaCl₂ as an efficient Lewis base catalyst. Carbamoyl and thiocarbamoyl phosphonic esters were obtained in good yield (37%–65%) and purity under mild conditions by the reaction of diethyl phosphite with isocyanates and isothiocyanates in the presence of CaCl₂. This method is easy, rapid, and good‐yielding reaction for the synthesis of carbamoyl and thiocarbamoyl phosphonic esters. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:250–253, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20538     

A facile synthesis of 1-cycloalkenyl isothiocyanates with silicon tetraisothiocyanate

The reaction of cycloalkanones with silicon tetraisothiocyanate in the presence of (Me₃SiO)₂SO₂^?nBu₃SnF or Zn(NCS)₂ provides 1-cycloalkenyl isothiocyanates in good yields under mild conditions.     

Iodine-mediated direct synthesis of multifunctional 2-aminobenzimidazoles from N-substituted o-diaminoarenes and isothiocyanates

Multifunctional 2-aminobenzimidazoles were directly synthesized through sequential addition of N-substituted o-diaminoarenes to isothiocyanates, formation of carbodiimides via I₂-mediated oxidative desulfurization, and intramolecular cycloaddition. This efficient and eco-friendly synthetic process provides a facile access to diverse 2-aminobenzimidazole derivatives from readily accessible substrates under mild reaction conditions in a scalable fashion.     

Reaction of Primary Alkylamines,Heterocumulenes, and Isatoic Anhydride,Catalyzed by Magnetic Fe3O4 Nanoparticles in H2O

An efficient protocol for the one‐pot reaction of isatoic anhydride (=1,2‐dihydro‐4H‐3,1‐benzoxazine‐2,4‐dione), primary alkylamines, and heterocumulenes (isothiocyanates and isocyanates) in H₂O catalyzed by magnetically recoverable Fe₃O₄ nanoparticles is described.     

A Straightforward One‐Pot Synthesis of 3,4‐Dihydroquinazoline‐2(1H)‐thione Derivatives in Aqueous Organic Solvent

A novel and efficient method has been developed for the synthesis of a series of 3,4‐dihydroquinazoline‐2(1H)‐thione derivatives in aqueous organic solvent starting from 3‐(2‐aminophenyl)acrylates with isothiocyanates via a tandem intermolecular nucleophilic addition/intramolecular Michael addition reaction under mild conditions. A broad substrate scope has been demonstrated, which shows wide functional group tolerance and chemical specialization. The efficiency of the methodology could make this process available on gram‐scale.     

Lewis acid-controlled reactions of zirconacyclopentadienes with isocyanates and isothiocyanates. One-pot three- or four-component synthesis of multiply substituted iminocyclopentadienes and butadiene-tethered 1,6-bisamides and electrophilic cyclization

Multiply substituted zirconacyclopentadienes including bicyclic zirconacyclopentadienes and zirconaindenes reacted with isocyanates and isothiocyanates in the presence of Lewis acids to afford iminocyclopentadienes and conjugated 1,6-bisamides, depending on the nature of Lewis acids, isocyanates, and isothiocyanates used. Only in the presence of BF₃ could iminocyclopentadienes be obtained in high isolated yields when zirconacyclopentadienes were treated with isocyanates. On the contrary, BF₃ could not mediate the reaction of zirconacyclopentadienes with isothiocyanates. For the reactions of zirconacyclopentadienes with isothiocyanates, EtAlCl₂ was found effective to generate iminocyclopentadienes as the products. Interestingly, however, for the reactions of zirconacyclopentadienes with isocyanates, EtAlCl₂ was found to work very differently from BF₃. Instead of iminocyclopentadienes, conjugated 1,6-bisamides and conjugated mono-amides were obtained as products in high isolated yields from the reactions of zirconacyclopentadienes with isocyanates, depending on the substituents of isocyanates. The reaction path and products could be controlled by Lewis acids. As a demonstration of the usefulness of thus obtained unsaturated bisamides, electrophilic cyclization using acids, NBS, and I₂ was carried out. Electrophilic cyclization of multisubstituted conjugated 1,6-bisamide derivatives afforded cyclic iminoethers in excellent yields with perfect selectivity. Only one of the amide groups took part in the electrophilic cyclization.     

Synthesis and properties of 3-substituted 3-azabicyclo-[3.3.1]nonan-9-amines

Catalytic hydrogenation of 3-benzyl- and 3-tert-butoxycarbonyl-3-azabicyclo[3.3.1]nonan-9-one oximes over Raney nickel gave the corresponding 3-substituted 3-azabicyclo[3.3.1]nonan-9-amines which were converted into amides via reactions with acetyl and chloroacetyl chlorides and maleic and succinic anhydrides, into Schiff bases by condensation with benzaldehyde and 4-chlorobenzaldehyde, and into isothiocyanates by treatment with thiophosgene in the presence of K₂CO₃. 3-Benzyl- and 3-tert-butoxycarbonyl-3-azabicyclo-[3.3.1]nonan-9-yl isothiocyanates readily reacted with methanol, aniline, and sodium azide to produce methyl thiocarbamate, thiourea, and dihydrotetrazole-5-thione derivatives having a 3-azabicyclo[3.3.1]nonane fragment.     

CuBr/Et3N‐Promoted Reactions of 2‐Aminobenzamides and Isothiocyanates: Efficient Synthesis of Novel Quinazolin‐4(3H)‐ones

A series of novel quinazolin‐4(3H)‐one derivatives were efficiently synthesized starting from isatoic anhydride. First, reaction of isatoic anhydride and amines in H₂O at room temperature afforded 2‐aminobenzamides. Then, CuBr/Et₃N promoted reaction of 2‐aminobenzamides and different aryl isothiocyanates in DMF at 80° afforded the title compounds in good yield.     

Effect of piperidones on hydrogen permeation and corrosion inhibition of mild steel in acidic solutions

The influence of 3-methyl-2,6-diphenyl piperidin-4-one (MDPO) and 2-phenyl decahydroquinoline-4-one (PDQO) synthesised in the laboratory on hydrogen permeation and corrosion inhibition of mild steel in 1N H₂SO₄ has been studied using weight loss and various electrochemical AC and DC corrosion-monitoring techniques. Both the compounds inhibit the corrosion of mild steel in H₂SO₄. Potentiodynamic polarisation studies clearly reveal that they behave predominantly as cathodic inhibitors. The extent of decrease in hydrogen permeation current through steel surfaces has been studied by the hydrogen electropermeation technique. Double layer capacitance (C _dl ) and charge transfer resistance (R _t ) values are derived from Nyquist plots obtained from AC impedance studies. The adsorption of these compounds on mild steel surfaces from H₂SO₄ obeys Temkin’s adsorption isotherm.     

A practical synthesis of 2‐aminobenzothiazoles via copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates in ionic liquids

A copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates was achieved in hydrophobic [bmim][PF₆] ionic liquid under mild conditions, generating a variety of 2‐aminobenzothiazoles in good to excellent yields. The tandem reaction that was carried out in [bmim][PF₆] has some obvious advantages such as accelerated reaction rate and increased yield as compared with the reaction run in volatile solvents such as toluene. Furthermore, the CuI/1,10‐phenanthroline catalytic system can be reused up to eight times without loss of activity and efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Reactions of Heterocumulenes with Organometallic Reagents: VIII. Reactions of Carbanions Derived from Alkoxy- and Alkylsulfanylethenes with Isothiocyanates-A Convenient Route to 2-Propenethioamides, 1-Methylsulfanyl-2-propen-1-imines,and Benzothiazoles

>Metalated alkoxy- and alkylsulfanylethenes readily add to isothiocyanates; the subsequent hydrolysis or alkylation of the adducts leads to formation of 2-propenethioamides or 1-methylsulfanyl-2-propen-1-imines (as mixtures of synand antiisomers) in 74-100% yield. The reaction of metalated alkoxyethenes with 2-fluorophenyl isothiocyanate opens the way to new benzothiazole derivatives. Hydrolysis of the latter provides a simple method for the preparation of 2-benzothiazolyl ketones.     

Ag2Cr2O7 nanoparticles: An eco-friendly and reusable catalyst for synthesis of pyrano[c]chromenediones and [1,3]dioxolo[g]chromeneones in aqueous media at ambient temperature

An efficient and green protocol for the synthesis of 4-aryl-3,4-dihydro-2H,5H-pyrano[3,2-c]chromene-2,5-diones and 8-aryl-7,8-dihydro-6H-[1,3]dioxolo[4,5-g]chromene-6-ones through the Ag₂Cr₂O₇ nanoparticles catalyzed cyclocondensation reaction of active methylene compounds including 4-hydroxycoumarin or 3,4-methylenedioxyphenol, aromatic aldehydes, and meldrum's acid in water at ambient temperature was described. This method demonstrates several advantages compared with methods that are currently employed such as a mild reaction conditions, simple work-up, good to excellent yields, avoiding toxic catalyst and hazardous solvent, and recovery and reuse of the catalyst.     

Efficient Synthesis of Novel 3-[5-(1H-Benzimidazol-2-Ylmethanesulfonyl)-4-Phenyl-4H-(1,2,4)Triazol-3-Yl]-1H-(1,8)Naphthyridin-4-One Derivatives

Abstract

of 1,4-dihydro-4-oxo-1,8-naphthyridine-3-carbohydrazide (4) with substituted phenyl isothiocyanates (5) in ethanol under reflux for 30 min gave thiosemicarbazide derivatives 6, which on cyclization in 2N NaOH under refluxing conditions for 1 h resulted in 3-(5-mercapto- 4-phenyl-4H-1,2,4-triazol-3-yl)-1,8-naphthyridin-4(1H)-one (7). Alternatively, 7 could also be prepared from following sequence of reactions, i.e., 4 → 8 → 7. In another sequence of reactions, condensation of 7 with chloroacetic acid in dimethylformamide (DMF) and K₂CO₃ as a mild base at 120 °C for 2 h resulted in 2-((5-(1,4-dihydro-4-oxo-1,8-naphthyridin-3-yl)-4-phenyl-4H-1,2,4-triazol-3-yl)sulfanyl)acetic acid (10). The latter, on reaction with substituted o-phenylenediamine (11) in 6N HCl for 4 h yielded 3-(5-((1H-benzo[d]imidazol-2-yl)methylthio)-4-phenyl-4H-1,2,4-triazol-3-yl)-1,8-naphthyridin-4(1H)-one (12). Alternatively, 12 could also be prepared by reacting 7 with 13 in DMF and K₂CO₃ as a mild base at 120 °C for 2 h, followed by oxidation with H₂O₂ resulting in the corresponding sulfonyl derivatives 14.     

A Mild,Simple, Efficient,and Selective Protection of Hydroxyl Groups Using Silica-Supported Sodium Hydrogen Sulfate as a Heterogeneous Catalyst

A mild, simple, novel, and highly efficient method for the rapid protection of various primary, secondary, tertiary aliphatic alcohols, aromatic alcohols, and oximes using hexamethyldisilazane (HMDS) in the presence of silica-supported sodium hydrogen sulfate (NaHSO ₄ -SiO ₂ ), as an active, inexpensive, nontoxic, heterogeneous, and readily available catalyst under ambient conditions is described. Timethylsilyl ethers were prepared in high to excellent yields, with short reaction times under mild and almost neutral reaction conditions at room temperature.     

Thiocarbamoyl- und Carbamoylderivate von 2-Amino-1-pyrrolinen als potentielle Antidiabetica

Zusammenfassung Alkylisothiocyanate und -cyanate reagieren mit 2-Amino-pyrrolinen bei 20° im allgemeinen zu 1-Carbamoyl-2-imino-pyrrolidinen, die durch Erwärmen im inerten Solvens auf 80° in die entsprechenden 2-Carbamoylimino-pyrrolidine (2-Ureido-1-pyrroline) umgelagert werden (Tab. 2).Überwiegend direkte Substitution am 2-Imino-N bei 20° erfolgt mit Arylsenfölen, Arylisocyanaten und Methoxymethylisocyanat. Auch sterisch gehinderte Reaktionspartner liefern direkt 2-Imino-Substitutionsprodukte (Tab. 3).1-Thiocarbamoyl- und-carbamoylderivate sind auch aus 3-Cyanpropyliso-thiocyanaten und-cyanaten durch cyclisierende Addition mit Aminen zugänglich (Schema 1).Während aus den 2-Thiocarbamoyliminoderivaten (Tab. 2,3) keine gezielte H₂S-Abspaltung möglich ist, liefern die 1-Thiocarbamoylderivate (Tab. 1) unter H₂S-Abspaltung und Ringöffnung 3-Cyanpropylcarbodiimide (Schema 1).

---

Synthesis of substituted 2-amino-1-pyrrolines, VI: Thiocarbamoyl and carbamoyl derivatives of 2-amino-1-pyrrolines as potential antidiabetics

Alkyl isothiocyanates and isocyanates react with 2-aminopyrrolines in general to form 1-carbamoyl-2-iminopyrrolidines, which rearrange to the corresponding 2-carbamoyliminopyrrolidines (2-ureido-1-pyrrolines) when heated to 80° in an inert solvent (Table 2).Direct substitution at the 2-imino nitrogen at 20° predominates with aryl isothiocyanates, aryl isocyanates and methoxymethyl isocyanate. Sterically hindered reactants also yield 2-imino substitution products directly.1-Thiocarbamoyl and carbamoyl derivatives are also obtainable from 3-cyanopropyl isothiocyanates and isocyanates by cycloaddition with amines (Scheme 1).While a controlled cleavage of H₂S from the 2-thiocarbamoylimino derivatives (Tables 2, 3) is not possible, the 1-thiocarbamoyl derivatives (Table 1) afford 3-cyanopropyl carbodiimides with loss of H₂S and ring opening (Scheme 1).

---

---

Herrn Dr.O. Isler zum 60. Geburtstag in Verehrung gewidmet.

---

Teile dieser Arbeit sind Gegenstand von Patentanmeldungen.

---

5. Mitt.:W. Klötzer, B. Schmidt undR. Franzmair, Mh. Chem.102, 635 (1971).     

Triple Frustrated Lewis Pair-Type Reactivity on a Single Rare-Earth Metal Center

Rare-earth metal cations have been used rarely as Lewis-acidic components in the chemistry of frustrated Lewis pairs (FLPs). Herein, we report the first cerium/phosphorus system ( 2 ) employing a heptadentate N₄P₃ ligand, which exhibits triple FLP-type reactivity towards a series of organic substrates, including isocyanates, isothiocyanates, diazomethane, and azides on a single rare-earth Lewis acidic Ce center. This result shows that the Ce center and three P atoms in 2 could simultaneously activate three equivalents of small molecules under mild conditions. This study broadens the diversity of FLPs and demonstrates that rare earth based FLP exhibit unique properties compared with other FLP systems.     

Synthesis of Mesoionic 4‐(para‐substituted Phenyl‐5‐2,4‐dichlorophenyl)‐1,3‐4‐thiadiazolium‐2‐aminides by Direct Cyclization via Acylation of Thiosemicarbazides

The synthesis of ten novel mesoionic 4‐[para‐substituted (H, CH₃, OCH₃, NO₂, Cl, Br, OH, t‐C₄H₉, C₆H₅, C₄H₉) phenyl‐5‐2,4‐dichlorophenyl]‐1,3‐4‐thiadiazolium‐2‐aminides, as hydrochlorides, are described. The synthesis strategy utilized the corresponding para‐substituted isothiocyanates as starting materials to obtain the thiosemicarbazides through reaction with phenylhydrazine (61–98%), which were then submitted to acylation with 2,4‐dichloro benzoyl chloride and direct cyclization to generate the desired substituted mesoionic compounds in good yields (ca. 80%).     

Functionalization of Quinazolin‐4‐Ones Part 2#: Reactivity of 2‐Amino‐3, 4, 5, or 6‐Nitrobenzoic Acids with Triphenylphosphine Thiocyanate,Alkyl Isothiocyanates,and Further Derivatization Reactions

2‐amino‐3, 4, 5, or 6‐nitrobenzoic acids were reacted with PPh₃(SCN)₂ and alkyl isothiocyanates to give 5, 6, 7, or 8‐nitro‐2‐thioxo‐3‐substituted quinazolin‐4‐ones, respectively. The position of the nitro group was found to have significant influence on the outcome of the reactions. Similarly, the nature of the substituent at position 8 (NO₂, NH₂, NH(C═O)CH₃) in 8‐substituted‐2‐methylthio quinazolin‐4‐ones was also found to significantly influence their reactivity towards morpholine. A selection of the products were also tested for in vitro antibacterial activity but little activity was observed.     

Synthesis,Characterization, X‐Ray Structural Analysis,and Iodination Ability of Benzyl(triphenyl)phosphonium Dichloroiodate

Benzyl(triphenyl)phosphonium dichloroiodate (BTPPICl₂), BnPh₃P⁺(ICl₂)^?, is easily synthesized in a nearly quantitative yield by the addition of BnPh₃P⁺Cl^? to a CH₂Cl₂ solution of iodine monochloride (ICl). BnPh₃P⁺Cl^? can be prepared by the reaction of Ph₃P and BnCl. The compound was characterized by physicochemical and spectroscopic methods (elemental analysis, FT‐IR, and ¹H‐NMR). The use of phosphonium counterion improves the quality of the BTPPICl₂ crystals. BTPPICl₂ crystallizes in the monoclinic system, and its crystal and molecular structure has been determined at 100(1) K by X‐ray diffraction. The structure was solved by the direct method and had refined R value of 0.0637 for 699 reflections (I>2σ(I)), space group P21/n with a=12.4700(3), b=13.2196(3), c=14.4580(3) Å, β=102.6340(10)°, V=2325.67(9) ų, and Z=4. The I‐atom is coordinated by two Cl‐atoms as ligands in a linear geometry. This compound is a versatile reagent for the efficient and selective iodination of organic substrates, in particular of aromatic phenols to the corresponding iodo compounds, under mild conditions. To assess the generality of method, a wide variety of phenols with electron‐donating and electron‐withdrawing substituents were studied. BTPPICl₂ is a mild iodination reagent, which offers a new avenue for an expeditious iodination of phenols. The inexpensive, relatively non‐toxic reagent, and mild conditions are the positive features of the procedure and reagent.