Efficient Synthesis of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines

A general method for the preparation of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines is described. These heterocycles can be synthesized from their respective anilines with 2‐chloro‐2‐imidazoline or 2‐chloro‐1,4,5,6‐tetrahydropyrimidine, generated in situ from imidazolidin‐2‐one and tetrahydropyrimidin‐2(1H)‐one activated by dimethyl chlorophosphate, in good to excellent yields.     

A Novel Holmium(III) Membrane Sensor Based on N‐(1‐Thien‐2‐Ylmethylene)‐1,3‐Benzothiazol‐2‐Amine

Abstract

A novel plasticized membrane sensor for Ho(III) ions based on N‐(1‐thien‐2‐ylmethylene)‐1,3‐benzothiazol‐2‐amine (TBA) as a neutral carrier was prepared. The best performance was obtained with a membrane composition of 31% PVC, 61% benzyle acetate, 2% sodium tetra phenyl borate and 6% carrier. The electrode exhibits a Nernstian response for Ho(III) ions over a particular concentration range (1.0×10^?5?1.0×10^?2 M) with a slope of 19.7±0.2 mV decade^?1. The limit of the detection is 7.0×10^?6 M. The sensor has a response time of <15 s and a useful working pH range of 4.0–9.5. The proposed sensor discriminates relatively well towards Ho(III) ions with regard to common alkali, alkaline earth, and specially lanthanide ions. It was successfully applied as an indicator electrode in a potentiometric titration of Ho(III) ions with EDTA. It was also applied in determination of fluoride ions in a mouth wash preparation. The proposed sensor was applied for the determination of Ho(III) ion concentration in binary mixtures.     

Novel Copolymers of N‐(4‐Bromophenyl)‐2‐Methacrylamide with 2‐Acrylamido‐2‐Methyl‐1‐Propanesulfonic Acid

The new acrylamide monomer, N‐(4‐Bromophenyl)‐2‐methacrylamide (BrPMAAm) has been synthesized by reacting 4‐Bromoaniline with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The radical‐initiated copolymerization of (BrPMAAm), with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) has been carried out in dimethylformamide (DMF) solution at 70±1°C using 2,2′‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy. The copolymer composition was evaluated by nitrogen content (N for AMPS‐units) in polymers led to the determination of reactivity ratios. The monomer reactivity ratios for BrPMAAm (M₁)‐AMPS (M₂) pair were computed using the Fineman‐Ross (F‐R), Kelen‐Tüdös (KT) and Extended Kelen‐Tüdös (EKT) methods. These parameters were also estimated using a non‐linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The mean sequence lengths determination indicated that the copolymer was statistically in nature. By TGA and DSC analyses, the thermal properties of the polymers have been studied. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.     

Convenient Preparation of N,N′‐Diphenyl‐N,N′‐bis(4‐aminophenyl)‐p‐phenylenediamine

Abstract

This article describes modified conditions to prepare N,N′‐diphenyl‐N,N′‐bis(4‐aminophenyl)‐P‐phenylenediamine in 60% overall yield.     

(R)‐N,N,N‐Trimethyl‐2‐Aminobutanol‐Bis(Trifluoromethane‐Sulfon)Imidate Chiral Ionic Liquid Used as Chiral Selector in HPCE,HPLC, and CGC

Abstract

In this work, the (R)‐N,N,N‐trimethyl‐2‐aminobutanol‐bis(trifluoromethanesulfon)imidate chiral ionic liquid was first used in chromatography and exhibited a excellent chiral recognition ability in high performance capillary electrophoresis (HPCE), high performance liquid chromatography (HPLC), and capillary gas chromatography (CGC), which also showed for the first time that chrial ionic liquid was an effective chiral selector in HPCE and HPLC. The compounds that have been separated using this chiral ionic liquid at least included alcohol, amine, acid, and amino acid, et al. enantiomers. As the chiral ionic liquid can be easily synthesized from relatively inexpensive materials, it should have a great potentiality for chiral separation in chromatographic science.     

Synthesis of (E)‐ and (Z)‐5‐(Bromomethylene)furan‐2(5H)‐one by Bromodecarboxylation of (E)‐2‐(5‐Oxofuran‐2(5H)‐ylidene)acetic Acid

(E)‐ and (Z)‐5‐(bromomethylene)furan‐2(5H)‐one have been prepared starting from the commercially available adduct between furan and maleic anhydride. A bromodecarboxylation reaction is a key step in the synthesis. The reaction gives the (E)‐ or (Z)‐5‐(bromomethylene)furan‐2(5H)‐one as the major product, dependent on the method used in the bromodecarboxylation.     

Amino Acids as a Chiral Pool: Synthesis of (S)‐and (R)‐2‐N‐Carbomethoxy‐5‐aminoindane from (S)‐ and (R)‐Phenylalanines

Enantioselective syntheses of (R)‐and (S)‐2‐N‐carbomethoxy‐5‐aminoindanes from (R)‐ and (S)‐phenylalanines, respectively, are described. A Friedel–Crafts reaction employing N‐carbomethoxy phenylalanine leads to chiral 2‐N‐carbomethoxy‐1‐indanone, which is diastereoselectively reduced to 1‐hydroxy‐2‐N‐carbomethoxyindane. After protection of the hydroxyl group, a regioselective nitration gives a 6‐nitroindane intermediate, which upon hydrogenation affords (R)‐or (S)‐2‐N‐carbomethoxy‐5‐aminoindane.     

Application of Sulfinyl bis(2,4‐dihydroxythiobenzoyl) in the Synthesis of N‐Substituted 2‐Amino‐5‐(2,4‐dihydroxyphenyl)‐1,3,4‐thiadiazoles

One‐stage synthesis of N‐substituted 2‐amino‐5‐(2,4‐dihydroxyphenyl)‐1,3,4‐thiadiazoles is described. The compounds were prepared by the reaction of the sulfinyl bis(2,4‐dihydroxythiobenzoyl) (STB) with 4‐substituted 3‐thiosemicarbazides. STB was obtained from 2,4‐dihydroxybenzenecarbodithioic acid and thionyl dichloride. The structure of compounds was confirmed by IR, ¹H NMR, ¹³C NMR, and EI‐MS data.     

An Asymetric Lutetium(III) Microsensor Based on N‐(2‐Furylmethylene) Pyridine‐2,6‐Diamine for Determination of Lutetium(III) Ions

Abstract

In this work, for the first time, we introduce a highly selective and sensitive lutetium(III) micro‐sensor. N‐(2‐furylmethylene) pyridine‐2,6‐diamine (FPD) was used as a membrane‐active component to prepare a highly sensitive Lu(III)‐selective polymeric membrane microelectrode. Theoretical calculations for FPD, lutetium and some other metal ions were carried out and selectivity toward Lu(III) ions was confirmed. The best performance was achieved by a membrane composed of 32% PVC, 60% o‐nitrophenyloctyl ether, 4% potassium tetrakis (p‐chlorophenyl) borate (KTpClPB) and 4% FPD. The electrode exhibits a Nernstian response for Lu(III) ions over a particular concentration range (1.0×l0^?11?1.0×10^?6 mol l^?1) with a slope of 20.5±0.2 mV decade^?1. The detection limit is 3.0×10^?11 mol l^?1 while the sensor presents a response time of <10 s and a useful working pH range of 4.0–10.5. As a matter of fact, the proposed sensor discriminates relatively well for Lu(III) ions in compare to common alkali, alkaline earth, heavy metals and, specially, lanthanide ions. The sensor was successfully applied as an indicator electrode in a potentiometric titration of Lu(III) ions with EDTA. In addition, it was used for determination of lutetium in some soil samples where domestic devices were stored. The proposed sensor was evaluated for Lu(III) ions determination in some binary mixtures.     

New Short Synthesis of (5)‐2,3‐Dimethoxy‐N‐[(1‐ethyl‐2‐pyrrolidinyl)methyl]‐5‐iodobenzamide: Dopamine D2 Receptor

A new short and highly efficient synthesis of (5)‐2,3‐dimethoxy‐N[(1‐ethyl‐2‐pyrrolidinyl)methyl]‐5‐iodobenzamide (epidepride, 1) from 3‐methoxy‐salicylaldehyde (o‐vanillin, 2) and 3‐methoxysalicyclic acid (6) was achieved by employing a new iodination method with iodine monochloride and iodine nitrate under basic conditions.     

Asymmetric Synthesis of (2S)‐1‐(3,4‐Dihydroxyphenoxy)‐3‐(3,′4′‐Dimethoxyphenoxy) Ethylamino‐2‐propanol hydrochloride (RO363)

Enantiomerically pure (S)‐RO363 was synthesized by using (R,R) Salen Co(III) complex for the resolution of terminal epoxide. The hydrolytic kinetic resolution process was carried out at room temperature in excellent enantioselectivity. The method can be applied for large‐scale preparation of (S) RO363.     

Synthesis of N‐Aryl‐2‐substituted Tetrahydrobenzimidazoles via Direct N‐Arylation

A series of novel N‐aryl‐2‐substituted tetrahydrobenzimidazoles has been synthesized via direct N‐arylation of 2‐substituted tetrahydrobenzimidazoles, which was accomplished by a medium aryl electrophile, 4‐methylsulfonylfluorobenze, in the presence of 37% KF/Al₂O₃ and 18‐crown‐6 in fair yields under mild reaction conditions. Meanwhile, the hydrogenation of 2‐phenylbenzimidazole was studied.     

Synthesis of New N‐(5‐Oxo‐2,5‐dihydro)pyrrol‐3‐yl Glycines and N‐(5‐Oxo‐2,5‐dihydro)pyrrol‐3‐yl Glycines Esters

Following our efforts towards the synthesis of new potential inhibitors of Xanthine Dehydrogenase (XDH), we describe here a general method for the preparation of N-(5-oxo-2,5-dihydro)pyrrol-3-yl glycines and N-(5-oxo-2,5-dihydro)pyrrol-3-yl glycine esters from glycine ethyl ester hydrochloride and various 4-hydroxy-5-oxo-2,5-dihydro-1H-pyrrole-3-carboxylic acid esters and carbonitriles.     

Scalable Process for 4‐(2‐Hydroxy‐2‐methyl)‐ethyl‐benzylamine

The preparation of the title compound has been revisited and improved. Starting from inexpensive cuminonitrile, 4‐(2‐hydroxy‐2‐methyl)‐ethyl‐benzylamine is obtained in a scalable two‐step process with an overall yield of 55%.     

The Structure of N‐(1‐Deoxy‐β‐D‐fructopyranos‐1‐yl)‐L‐proline Monohydrate (“D‐Fructose‐L‐proline”) and N‐(1,6‐Dideoxy‐α‐L‐fructofuranos‐1‐yl)‐L‐proline (“L‐Rhamnulose‐L‐proline”)

Nano n-propylsulfonated γ-Fe₂O₃ was found to be a highly efficient, reusable heterogeneous catalyst for the conversion of a range of monosaccharides and some of their derivatives to the corresponding O-isopropylidene derivatives in good to excellent yields by refluxing the reaction mixture in dry acetone. The magnetic property of the catalyst enabled its separation from the reaction mixture by a simple process of filtration along with the aid of an external magnet. The efficiency of the catalyst was found to be largely unaffected for at least up to six cycles of reuse, thus proving the new methodology to be environmentally rewarding besides being simple and facile in operation.     

Novel Copolymers of Styrene and Some Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 3‐benzyloxy, 4‐benzyloxy, 3‐ethoxy‐4‐methoxy, 3‐bromo‐4‐methoxy, 5‐bromo‐2‐methoxy, 2‐chloro‐6‐fluoro) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Novel Copolymers of Styrene and Halogen Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, halogen ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH [dbnd]C(CN)CON(CH₃)₂ (where R is 2‐Br, 3‐Br, 4‐Br, 2‐Cl, 3‐Cl, 4‐Cl, 2‐F, 3‐F, 4‐F), were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Synthesis and Crystallographic Study of1,6‐bis‐(N‐phenothiazinyl)‐2,4‐hexadiyne

1,6‐bis‐(N‐phenothiazinyl)‐2,4‐hexadiyne (I) was synthesized in high yield by oxidative coupling of N‐propargyl phenothiazine. Grown from methylene chloride‐hexane solution, I is a monoclinic crystal, space group C2/c a=14.9500(18) Å; b=13.5512(15) Å; c=12.0116(10) Å; β=102.628(9)° Å; V=2374.6(4) ų. The intermolecular distances and arrangement of I in the unit cell preclude the usual diacetylene reactivity. Nevertheless, heating of I at 145°C results in decomposition of I to phenothiazine and a dark brown solid. In addition, cation‐radicals of I were prepared by oxidation with nitrosonium tetrafluoroborate and iodine to give stable ion‐radical salts.     

Novel Copolymers of Styrene and Some Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 4‐(CH₃)₂N, 4‐CH₃CO₂, 4‐CH₃CONH, 2‐CN, 3‐CN, 4‐CN, 4‐(C₂H₅)₂N) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Novel Copolymers of Styrene and Alkoxy Ring‐Substituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, alkoxy ring‐substituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₄CH?C(CN)CON(CH₃)₂ (where R is 2‐OCH₃, 3‐OCH₃, 4‐OCH₃, 2‐OCH₂CH₃, 3‐OCH₂CH₃, 4‐OCH₂CH₂CH₃, 4‐OCH₂CH₂CH₂CH₃), were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ACBN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.