Synthesis of N‐Protected/Free Indole‐7‐Carboxaldehyde

A direct method for the preparation of N‐protected/free indole‐7‐carboxaldehyde is reported from the corresponding N‐protected 7‐bromomethylindoles using three different conditions.     

Convenient One‐Pot Protocol for an Exclusive Synthesis of 4‐Cyano/ethoxycarbonyl‐2,2‐dimethyl‐2H‐chromene and/or 3‐Cyano/ethoxycarbonyl‐2‐isopropyl‐benzo[b]furan from a Single Oxo‐ylide

[{2‐(Fluoroaryloxy)‐2‐methyl‐propanoyl}‐(cyano/ethoxycarbonyl) methylene]triphenylphosphoranes underwent microwave‐assisted tandem intramolecular Wittig and Claisen rearrangement and internal cyclization reactions to afford fluoro‐substituted 2,2‐dimethyl‐2H‐chromenes and/or 2‐isopropyl‐benzo[b]furans in good yield. Upon controlled microwave irradiation in the presence of Nafion H catalyst in xylene, the oxo‐ylides selectively formed 4‐cyano/ethoxycarbonyl‐2,2‐dimethyl‐2H‐chromenes. Microwave irradiation of the same oxo‐ylide in the presence of K₂CO₃ as catalyst or in a polar solvent–like sulfolane resulted in the exclusive formation of the corresponding fluoro‐substituted 3‐cyano/ethoxycarbonyl‐2‐isopropyl‐benzo[b]furans.     

Microwave‐Promoted Efficient Synthesis of 3‐(5‐Arylfuran‐2‐yl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐Triazolo[3,4‐b]‐1,3,4‐thiadiazoles

A simple, rapid, and efficient method for the synthesis of substituted 1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles under microwave irradiation conditions is reported, and a series of 3‐(5′‐aryl‐2′‐furyl)‐6‐aryl/aryloxymethylene‐1,2,4‐s‐triazolo[3,4‐b]‐1,3,4‐thiadiazoles was synthesized via this method.     

One‐Pot Synthesis of 2‐(1‐Alkyl/aralkyl‐1H‐benzimidazole‐2‐yl)‐quinoxaline Derivatives using Molecular Iodine

The title compound (5) has been prepared in one pot by refluxing 1‐(1‐alkyl/aralkyl‐1H‐benzimidazole‐2‐yl)‐ethanone (1) with substituted o‐phenylenediamine (2) in ethanol in the presence of iodine. Alternatively, 5 could also be prepared by treating 2‐bromo‐1‐(1‐ alkyl/aralkyl‐1H‐benzimidazole‐2‐yl)‐ethanone (3A) with 2 in refluxing ethanol. The formation of 5 from 1 and 2 probably occurs through the intermediacy of 3B (i.e., 3, X=I) and 4.     

Phase Behavior of n‐Butanol/n‐Octane/Water/Cationic Gemini Surfactant System

Phase diagrams of the n‐butanol/n‐octane/water/(12‐3‐12,2Br^?1) system were determined, where n‐octane usually represents oil (O), 12‐3‐12,2Br^?1 is a gemini cationic surfactant trimethylene‐1,3‐bis(dodecyldimethyl ammonium bromide) abbreviated as S, and n‐butanol is a co‐surfactant written as A. Effects of the weight ratio of gemini surfactant to cosurfactant, S/A, and of temperature on the phase behavior were studied. The microemulsion structures including O/W, bi‐continuous (B.C.), W/O, and liquid crystal were determined by the conductivity method and polarization measurement. Experimental results show that the gemini surfactant, used facilitates the formation of microemulsions compared with its corresponding monomeric surfactant, n‐dodecyl trimethylammonium bromide (DTAB). When S/A=1/1, and the total concentration of gemini surfactant and alcohol is 20–40%, microemulsions with higher water content can form in a wider region. When the temperature increases, the size and position of each type of microemulsion region changes notably.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Two‐Step Novel Synthesis of 2‐Amino‐6‐(1,3‐dioxo‐2,3‐dihydro‐1H‐inden‐2‐yl)‐4,7‐diphenyloxepine‐3‐carbonitrile and 5‐(1,3‐Dioxo‐2,3‐dihydro‐1H‐inden‐2‐yl)‐2‐imino‐6‐phenyl‐2H‐pyran‐3‐carbonitrile

Starting from indan‐1,3‐dione, a novel two‐step synthesis of the oxepine derivatives 5a,b and the pyran derivatives 7 and 8 under very simple reaction conditions is described.     

Factors Affecting the Droplet Size of Water‐in‐Oil Emulsions (W/O) and the Oil Globule Size in Water‐in‐Oil‐in‐Water Emulsions (W/O/W)

Multiple emulsions of the W₁/O/W₂ type are promising tools for encapsulating bioactive ingredients in the inner aqueous droplets. It is necessary, however, to control the factors influencing their encapsulation efficiency. One important factor is the particle size because it determines the surface area available for mass transport. Because of the coexistence of water and oil droplets in multiple emulsions, there are numerous factors that have an impact on particle size, for example, oil phase composition, interfacial properties, and viscosity of the phases. The purpose of this study was to systematically investigate the effect of these factors on particle sizes in multiple emulsions.     

Synthesis of Novel (3a,S)‐1‐Aryl/aryloxy/alkoxy‐3a,4‐dihydro‐3H‐1λ5‐[1,3,2]oxazaphospholo [3,4‐a] indole‐1‐ones,Thiones, and Selenones

Synthesis of novel (3a,S)‐1‐aryl/aryloxy/alkoxy‐3a,4‐dihydro‐3H‐1λ⁵‐[1,3,2]oxazaphospholo [3,4‐a] indole‐1‐ones, thiones, and selenones was achieved in two steps with high yields from 2,3‐dihydro‐1H‐indol‐2(S)yl methanol (1) and dichlorophenyl phosphine/ethyl dichlorophosphite (2a and b) in the presence of triethylamine in dry THF followed by treatment with hydrogen peroxide, sulfur, and selenium. The compounds 4g–k have been synthesized by the direct cyclocondensation of 1 with different substituted phenyl phosphorodichloridates (2c–e, g) and bis(2‐chloroethyl) phosphoramidic dichloride (2f).     

One‐Pot Synthesis of 2‐Amino‐4‐aryl‐3‐carbalkoxy‐7,7‐dimethyl‐5,6,7,8‐tetrahydrobenzo[b]pyran Derivatives Catalyzed by KF/Basic Al2O3 Under Ultrasound Irradiation

Abstract

Synthesis of 2‐amino‐4‐aryl‐3‐carbalkoxy‐7,7‐dimethyl‐5‐oxo‐5,6,7,8‐tertrahydrobenzo[b]pyran derivatives was carried out in 81–98% yields by one‐pot condensation of aromatic aldehydes with cyanoacetic esters and 5,5‐dimethyl‐1,3‐cyclohexanedione catalyzed by KF/basic Al₂O₃ at room temperature under ultrasound irradiation.     

Synthesis of C‐Nucleoside Analogues Starting from 1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one

Abstract

1‐(Methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐4‐phenyl‐but‐3‐yn‐2‐one (4) was synthesized by the reaction of (methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)ethanal (2) with lithium phenylethynide and following oxidation. Compound 4 and hydrazine hydrate provided the 3(5)‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl‐methyl)‐5(3)‐phenyl‐1H‐pyrazole (5). The reactions of 4 with amidinium salts and a S‐methyl‐isothiouronium salt, respectively, furnished the pyrimidine C‐nucleoside analogues 6a–6c. Treatment of 4 with 2‐aminobenzimidazole afforded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐ylmethyl)‐4‐phenyl‐benzo [4,5]imidazo[1,2‐a]pyrimidine (7a). Compound 4 and sodium azide yielded 2‐(methyl 3‐O‐benzyl‐4,6‐O‐benzylidene‐2‐deoxy‐α‐D‐altropyranosid‐2‐yl)‐1‐[5(4)‐phenyl‐1H(2H)‐1,2,3‐triazole‐4(5)‐yl]ethanone (8).     

Two Novel Microwave‐Promoted Reactions between Ethyl 6‐Acetylpyridine‐2‐carboxylate and Aromatic Amine/Aliphatic Amine

The unsymmetric precursor ethyl 6‐acetylpyridine‐2‐carboxylate (3) was synthesized from 2,6‐dipiclinic acid (1). On the basis of this precursor, two distinctively different types of compounds were prepared by microwave irradiation under solvent‐free conditions. One type was mono(imino)pyridine compounds (4a–4f), originating from the Schiff base condensation between a series of aromatic amines and the precursor 3; another type was 6‐acetylpyridine‐2‐carboxamide compounds (5a–5c), which were the products of amidation reactions between a series of aliphatic amines and the same precursor 3.     

Efficient Preparation of ((3‐Chloro‐2‐fluoro‐phenyl)‐[7‐methoxy‐8‐(3‐morpholin‐4‐yl‐propoxy)‐10,11‐dihydro‐5‐oxa‐2,4,11‐triaza‐dibenzo(a,d)cyclohepten‐1‐yl]‐amine) for In‐Vivo Study

An improved route for the preparation of highly functionalized 5,6‐dihydro‐pyrimido[4,5‐b][1,4]oxazepine 1a in multigram quantities was developed. This new methodology was highlighted by the proper methoxy disposition via a regioselective methylation of 2,4,5‐trihydroxy‐benzaldehyde followed by a magnesium sulfate–promoted cyclization.     

Bromination of 4‐Dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐ones

Bromination of 4‐dichloromethyl‐4‐methylcyclohexa‐2,5‐dien‐1‐one and 4‐dichloromethyl‐3,4‐dimethylcyclohexa‐2,5‐dien‐1‐one has been studied. The reaction conditions required for the formation of mono‐, di‐, and tribrominated products have been optimized.     

Behavior of a Metastable Gel of Sodium N‐Stearoyl‐l‐Glutamate/Water System

Gel formation was observed at 25°C in a mono sodium N‐stearoylglutamate (C18GS)/water system by quick cooling (quenching, 15°C/minute), whereas coagel was formed by slow cooling (annealing, 1°C/minute). Two kinds of phase transition temperatures, T_gel (coagel‐gel) and T_c (gel‐liquid crystal or micelle), were detected in the annealing system using a differential scanning calorimeter (DSC). On the other hand, only T_c was observed in the quenching system. Since the phase transition entropies at T_c in both the quenching and annealing systems are similar, both gels are considered to be in the same structure, and the gel observed in the quenching system at low temperature is in the metastable, supercooled state. Judging from the ¹H‐NMR data and microscopic observation, a homogenous gel is formed above 7 wt% of C18GS. With an increase in surfactant concentration, the thixotropic tendency of the gel increases due to the decrease in free‐water. Since it was difficult to show gel formation with the shorter chain homologs, C14GS and C12GS, the hydrocarbon chain length of the surfactant appears to be very important in the formation of a metastable, supercooled gel.     

Facile One‐Pot Synthesis of 3‐{2‐[5‐Hydroxy‐4‐(2‐hydroxy‐ethyl)‐3‐methyl‐pyrazol‐1‐yl]‐thiazol‐4‐yl}‐chromen‐2‐ones via a Three‐Component Reaction

Reaction of 3‐(2‐bromo‐acetyl)‐chromen‐2‐one with thiosemicarbazide and 2‐acetylbutyro lactone in anhydrous ethanol gave 3‐{2‐[5‐hydroxy‐4‐(2‐hydroxy‐ethyl)‐3‐methyl‐pyrazol‐1‐yl]‐thiazol‐4‐yl}‐chromen‐2‐one in good yields.     

Efficient Synthesis of Trialkyl (E)‐3‐{3‐Oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates

The reaction of dialkyl acetylenedicarboxylates with alkyl 2‐[3‐oxo‐3,4‐dihydro‐2(1H)‐quinoxadinylidene]ethanoates in the presence of triphenylphosphine leads to trialkyl (E)‐3‐{3‐oxo‐2‐3,4‐dihydro‐2‐(1H)‐quinoxalinylidene}‐prop‐1‐ene‐1,2,3‐tricarboxylates in good yields.     

Structure of 2,4,4,5,5‐pentamethyl‐2‐imidazoline‐1‐oxyl‐3‐oxide

The crystal and molecular structures of the stable nitroxide radical 2,4,4,5,5pentamethyl2imidazoline1oxyl3oxide was determined. The N—O bond lengths are 1.279(2) and 1.280(2), respectively. The O^-—N⁺=C—N— O fragment is nearly planar with carbon atoms of the ethyl fragment that deviated from the O—N⁺=C—N—O plane by –0.204(5) and +0.176(5). The minimum intermolecular distance between the oxygen atoms of NO groups is 4.094.     

Reaction characteristics of cellulose in the LiCl/1,3‐dimethyl‐2‐imidazolidinone solvent system

In order to elucidate the nature of the LiCl/1,3dimethy2imidazolidinone (DMI) solvent system as one of the homogeneous reaction media of cellulose, cellulose acetate (CA) and Omethylcellulose (MC) were prepared using this solvent system, and the distribution of substituents within anhydroglucose units was examined by ¹³CNMR. It was found that (i) homogeneous cellulose solutions can be easily prepared by heating 2, 5–12 and 100 parts of weight of cellulose, LiCl, and DMI, respectively, and (ii) the relative reactivity of hydroxyl groups is in the order C6 > C2 > C3 for both CA and MC. A remarkable feature of this solvent system is that the reaction efficiency in etherification is very high compared with other homogeneous solvent systems.