Synthesis and properties of new organosoluble and alternating aromatic poly(ester-amide-imide)s with pendant phosphorus groups

New phosphorus-containing aromatic diesteramines, 1,4-bis(4-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (p- 3 ) and 1,4-bis(3-aminobenzoyloxy)-2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)naphthalene (m- 3 ), were synthesized by the reaction of 2-(6-oxido-6H-dibenz〈c,e〉〈1,2〉oxaphosphorin-6-yl)-1,4-naphthalenediol with 4-nitrobenzoyl chloride and 3-nitrobenzoyl chloride, respectively, followed by catalytic reduction. Two series of phosphorus-containing aromatic poly(ester-amide-imide)s with inherent viscosities of 0.94–2.00 and 0.41–0.56 dL/g were prepared via low-temperature solution polycondensation from p- 3 and m- 3 , respectively, with three imide ring-preformed diacid chlorides. All the poly(ester-amide-imide)s were amorphous and readily soluble in many organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP). Transparent, tough, and flexible films of these polymers were cast from DMAc or NMP solutions. Their casting films possessed a tensile strength range of 118–181 MPa, an elongation to break of 5–11%, and an initial modulus range of 2.41–4.46 GPa. They had useful levels of thermal stability associated with relatively high glass-transition temperatures (264–286 °C) and 10% weight-loss temperatures in excess of 450 °C in nitrogen or air. The limiting oxygen indices of these polymers were 41–46. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1786–1799, 2001     

One-pot,three-component,catalyst-free synthesis of novel derivatives of pyrido-[2,3-d]pyrimidines under ultrasonic irradiations

Novel derivatives of pyrido-[2,3-d] pyrimidines were synthesized via an efficient and catalyst- free, one-pot, three-component reaction of 3-(1-methyl-1H-pyrrol-2-yl)-3-oxopropanenitrile, 6-amino-(ethylthio)pyrimidine-4(3H)-one, and arylaldehydes under ultrasonic irradiations. This practical method furnished the desired pyridopyrimidines in high yields (79–89%) and short reaction times (25–40 min).     

Synthesis of Enantiomerically Pure D- and L-(Heteroaryl)alanines by asymmetric hydrogenation of (Z)-α-amino-αβ-didehydro esters

Homogeneous asymmetric hydrogenation of a wide range of methyl and tert-butyl (Z)-2-(acylamino)-3-(heteroaryl)acrylates (see 1a–f and 2a–d, f, g , resp.) catalyzed by diphosphinerhodium catalysts was studied for the synthesis of enantiomerically pure 3-furyl-, 3-thienyl-, and 3-pyrrolylalanines (see 3a–f , and 4a–d, g ; Scheme 1). The precursors, the (Z)-α-amino-α,β-didehydro esters 1a–f and 2a–d, f, g were prepared in high yields using the phosphorylglycine-ester method (Scheme 1). Isomerically pure (Z)-α-amino-α,β-didehydro esters were required to obtain the highest enantiomeric excesses (ee's) in the asymmetric hydrogenation, and the tert-butyl-ester strategy was beneficial in terms of both getting pure (Z)-α-amino-α,β-didehydro esters and obtaining high ee's in the hydrogenation. Finally, in contrast to the methyl-ester series, deprotection of the tert-butyl esters 4a–d, g was easily performed using CF₃CO₂H without any racemization.     

Addition of trimethylsilyl azide and of “mixed anhydrides” to the N-C(3) σ-bond in 3-substituted-1-azabicyclo[1.1.0]butanes

Trimethylsilyl azide adds smoothly to the highly strained N-C(3) σ-bond in 3-ethyl-1-azabicyclo[1.1.0]-butane ( 1 ) to afford an adduct, 2 , that reacts in situ with a variety of electrophilic reagents (i.e., ethyl chloroformate, p-toluenesulfonyl chloride, benzoyl chloride, acetyl chloride, and oxalyl chloride) to afford the corresponding N-substituted-3-azido-3-ethylazetidines 3–7 , respectively in 62–72% yield. Similarly, 1 reacts regiospecifically with “mixed anhydrides” (i.e., p-toluenesulfonyl acetate, methanesulfonyl acetate, and benzoyl trifluoromethanesulfonate) to afford the corresponding adducts, 8–10 , respectively) in 38–68% yield. Reaction of p-toluenesulfonyl azide with 1-aza-3-phenylbicyclo[1.1.0]butane ( 12 ) produces two products: N-(p-toluenesulfonyl-3-azido-3-phenylazetidine ( 13 , 15%) and a dimeric product, N-(N'-p-toluenesulfonyl-3′-phenyl-3′-azetidinyl)-3-azido-3-phenylazetidine ( 14 , 28%). Ethyl chloroformate adds to the N-C(3) σ-bond in 1-aza-3-(bromomethyl)bicyclo[1.1.0]butane ( 15 ) to afford N-carboethoxy-3-(bromomethyl)-3-chloroazetidine ( 16 ) in 73% yield.     

Quorum sensing inhibitors from marine bacteria Oceanobacillus sp. XC22919

In this study, three active compounds isolated from Oceanobacillus sp. XC22919 were identified as 2-methyl-N-(2′-phenylethyl) butyramide (1), 3-methyl-N-(2′-phenylethyl)-butyramide (2) and benzyl benzoate (3), and were first reported to exhibit the apparent quorum sensing inhibitory activities against C. violaceum 026 and P. aeruginosa. Compounds 1–3 inhibited violacein production of C. violaceum 026 by 10.5–55.7, 11.2–55.7, and 27.2%–95.7%, respectively, and inhibited pyocyanin production of P. aeruginosa by 1.7–50.8, 39.1–90.7, and 57.2%–98.7%, respectively. The azocasein-degrading proteolytic rates of P. aeruginosa were observed by 13.4–31.5, 13.4–28.8, and 11.3%–21.1%, respectively. With respect to elastase, the range of inhibition of activity of compounds 1–3 was 2.1–30.3, 4.2–18.2, and 8.9%–15.7%, respectively. Compounds 1 and 3 also showed a concentration-dependent attenuation in biofilm formation, with the maximum of 50.6% inhibition, and 37.7% inhibition at 100 μg/mL, respectively.     

Enantio- and Diastereoselective Aldol-Reaction of 2,6-Dimethylphenyl Propionate Using Titanium-Carbohydrate Complexes

Chloro(cyclopentadienyl)bis(1,2:5,6-di-O-isopropylidene-α-D -glucofuranos-3-O-yl)titanium ( 1 ) is used for the transmetallation of Li-enolates obtained from propionyl derivatives. While such Ti-enolates of ketones and hydrazones appear to be unreactive, the (E)enolate 13 of 2,6-dimethylphenyl propionate ( 11 ) adds to the re-side of aldehydes, affording various syn-aldols 14 with high dia- and enantioselectivity (92–97% ds, 91–97% ee, cf. Scheme 2 and Table 1). Racemic syn-aldols (±)- 14 are obtained analogously from the achiral bis(2-propyloxy)-Ti-enolate 15 (Scheme 2 and Table 2). In contrast to the unstable Li-enolate 10 , the Ti-enolates 13 and 15 isomerize at ?30°, presumably to the thermodynamically more stable (Z)-enolates (Scheme 4), While the diastereoselectivity of the achiral enolate 15 is lost upon this equilibration, the chiral (Z)-enolate 27 quite unexpectedly affords anti-aldols 12 of high optical purity (94–98% ec) and, in most cases, with acceptable-to-good diastereoselectivity (82–90% ds). Notable exceptions are branched unsaturated and aromatic aldehydes which form a greater proportion of synepimers of moderate optical purity (Scheme 5 and Table 3). Consistent with these findings, re-facial-and ami -selective aldol-addition is also exhibited by the (Z)-configurated Ti-enolate 22 of N-propionyl-oxazolidi-none 19 (Scheme 3).     

2-Benzoyl-2-ethoxycarbonylvinyl-1 and 2-benzoylamino-2-methoxy-carbonylvinyl-1 as N-protecting groups in peptide synthesis. Their application in the synthesis of dehydropeptide derivatives containing N-terminal 3-heteroarylamino-2,3-dehydroalanine

Ethyl 2-benzoyl-3-dimethylaminopropenoate ( 6 ) and methyl 2-benzoylamino-3-dimethylaminopropenoate ( 46 ) were used as reagents for the protection of the amino group with 2-benzoyl-2-ethoxycarbonylvinyl-1 and 2-benzoylamino-2-methoxycarbonylvinyl groups in the peptide synthesis. Reactions of ethyl 2-benzoyl-3-dimethylaminopropenoate (6) with α-amino acids gave N-(2-benzoyl-2-ethoxycarbonylvinyl-1)-α-amino acids 13–19. These were coupled with various amino acid esters to form N-(2-benzoyl-2-ethoxycar-bonylvinyl-1)-protected dipeptide esters 20–31. The removal of 2-benzoyl-2-ethoxycarbonylvinyl-1 group, which was achieved by hydrazine monohydrochloride or hydroxylamine hydrochloride, afforded hydrochlo-rides of dipeptide esters 32–41 in high yields. Similarly, the substitution of the dimethylamino group in methyl 2-benzoylamino-3-dimethylaminopropenoate ( 46 ) by glycine gave N-(2-benzoylamino-2-methoxycar-bonylvinyl-1)glycine ( 47 ), which was coupled with glycine ethyl ester to give N-[N-(2-benzoylamino-2-methoxycarbonylvinyl-1)glycyl]glycine ethyl ester ( 48 ). Treatment of 48 with 2-arnino-4,6-dirnethylpyrimi-dine afforded N-[glycyl]glycine ethyl ester hydrochloride (34) in high yield. Amino acid esters and dipeptide esters were employed in the preparation of tri- 58-70, tetra- 71–82, and pentapeptide esters 83–85 containing N-terminal 3-heteroarylamino-2,3-dehydroalanine. 2-Chloro-4,6-dimethoxy-1,3,5-triazine was employed as a coupling reagent for the preparation of peptides 58–85.     

Efficient method for the synthesis of 1,2,3-triazole functionalized isoxazolidine derivatives by 1,3-dipolar cycloaddition of nitrones with terminal olefins

1-Phenyl-1,2,3-triazole-4-carbaldehyde 1 was treated with different N-alkyl hydroxylamine hydrochlorides 2 using NaHCO₃ to obtain 1,2,3-triazole substituted N-alkyl nitrones 3a–c. The nitrones 3a–c were further reacted with different substituted olefins and furnished 2-alkyl-3-(1-phenyl-1H-1,2,3-triazol-4-yl)-5-(substituted)isoxazolidine derivatives 4a–p in high yields via 1,3-dipolar cycloaddition reaction.     

Nucleotides. Part XLVI. The synthesis of phospholipid conjugates of antivirally active nucleosides by the improved phosphoramidite methodology

The application of the improved phosphoramidite strategy for the synthese of oligonucleotides using β-eliminating protecting groups to phospholipid chemistry offers the possibility to synthesize phospholipid conjugates of AZT ( 6 ) and cordycepin. The synthesis of 3′-azido-3′-deoxythymidine ( 6 ) was achieved by a new isolation procedure without chromatographic purification steps in an overall yield of 50%. Protected cordycepin ( = 3′-de-oxyadenosine) derivatives, the N⁶,2′-bis[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 12 ) and the N⁶,5′-bis[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 13 ) wre prepared by known methods and direct acylation of N⁶-[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 9 ), respectively. These protected nucleosides and the 3′-azido-3′-de-oxythymidine ( 6 ) reacted with newly synthesized and properly characterized lipid-phosphoramidites 21–25 , catalyzed by 1H-tetrazole, to the corresponding nucleoside-phospholipid conjugates 26–38 in high yield. The deprotection was accomplished via β-elimination with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in aprotic solvents to give analytically pure nucleoside-phospholipid diesters 39–51 as triethylammonium or sodium salts. The newly synthesized compounds were characterized by elemental analyses and UV and ¹H-NMR spectra.     

Synthesis and characterization of novel aromatic polyamides containing 3-trifluoromethyl-substituted triphenylamine

A new 3-trifluoromethyl-substituted triphenylamine-containing aromatic diacid monomer, N,N-bis(4-carboxyphenyl)-3-trifluoromethylaniline, was prepared by the substitution reaction of 3-trifluoromethylaniline with 4-fluorobenzonitrile, followed by alkaline hydrolysis of the dinitrile intermediate. Novel aromatic polyamides with 3-trifluoromethyl-substituted triphenylamine moieties were prepared from the diacid and various aromatic diamines via the direct phosphorylation polycondensation. All the polyamides were amorphous and readily soluble in many polar organic solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone, and could be solution-cast into transparent, tough, and flexible films with good mechanical properties. They exhibited good thermal stability with relatively high glass-transition temperatures (258–327°C), 10% weight-loss temperatures above 500°C, and char yields higher than 60% at 800°C in nitrogen. These polymers had low dielectric constants of 3.22–3.70 (100 Hz), low moisture absorption in the range of 1.75–2.58%, and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 375–395 nm range. Cyclic voltammograms of the polyamide films cast onto an indium tin oxide coated glass substrate exhibited a reversible oxidation redox couple with oxidation half-wave potentials (E_1/2) of 0.95–1.00 V vs. Ag/AgCl in an acetonitrile solution.     

Solvolysen von 4-Alkylidenbicyclo[3.2.0]hept-2-en-6-olen. Synthese von 1-Vinylfulvenen und 8,8-Diphenylheptafulven

Solvolysis of 4-Alkydenbicyclo[3.2.0]hept-2-en-6-oles. Synthesis of 1-Vinylfulvenes and 8,8-Diphenylheptafulvene Four 4-alkylidenebicyclo[3.2.0]hept-2-en-6-ones 2–5 , obtained via ketene cycloaddition to fulvenes, were reduced to separated mixtures of the ‘endo’ -alcohols ‘endo’- 6 to ‘endo’- 9 (68–73%) and ‘exo’- 6 to ‘exo’- 9 (3–20%). Treatment of some of these alcohols with (CF₃SO₂)₂O in CH₂Cl₂/pyridine caused a spontaneous solvolysis to yield unsaturated 7-membered rings as pyridinium triflates 10–12 or 1-vinylfulvenes 13 and 14 , a new class of reactive tetraenes: Both ‘endo’- 9 and ‘exo’- 9 , having two methyl groups at C(7), were converted into the vinylfulvene 13 (≈ 80%). The alcohols with two H-atoms at C(7) exhibited a stereochemically controlled reaction selectivity, inasmuch as ‘endo’- 6 to ‘endo’- 8 afforded only the corresponding 7-membered-ring pyridinium salts 10–12 (66–79%), while ‘exo’- 6 produced only the vinylfulvene 14 (77%). A stereoelectronic control argument explains the C(1), C(5)-bond cleavage with ‘endo’- B and ‘endo’– 6 -‘endo’- 8 , as well as the C(1), C(7)-bond cleavage with ‘exo’- B , ‘exo’- 6 , and with both ‘endo’- and ‘exo’- 9 . Thermolysis (120°) of the pyridinium triflates 10 and 11 yielded the 3-isopropenyl-cycloheptatrienes 18 and 19 , respectively (≈90%); similar conditions (145°) applied to the triflate 12 produced the doubly cyclized fluorene derivative 21 (60%). When the iodide 22 derived from the triflate 12 with Nal was heated in refluxing toluene, 8,8-diphenylheptafulvene ( 23 , 86%) was obtained.     

Glycosylidene Carbenes. Part 14. Glycosidation of partially protected galactopyranose-, glucopyranose-, and mannopyranose-derived vicinal diols

The relation between H-bonding in diequatorial trans-1,2 and axial, equatorial cis-1,2-diols and the regioselectivity of glycosidation by the diazirine 1 was examined. H-Bonds were assigned on the basis of FT-IR and ¹H-NMR spectra (Fig. 1). Glycosidation by 1 of the gluco-configurated diequatorial trans-2,3-diols 4–7 yielded the mono-glucosylated products 16/17/20/21 (69–89%); 1,2-/1,3-linked products (37–46:63–54), 24/25/28/29 (60–63%; 1,2-/1,3-linked products 46–51:54–49), 32–35 (69–94%; 1,2-/1,3-linked products 45–52:55–48), and 36/37/40/41 (59–63%; 1,2-/1,3-linked products 52–59:48–41), respectively (Scheme 1, Table 3). The disaccharides derived from 4, 5 , and 7 were characterized as their acetates 18/19/22/23, 26/27/30/31 , and 38/39/42/43 , respectively. Glycosidation of the galacto-configurated diequatorial 2,3-diols 8 and 9 and the manno-configurated diequatorial 3,4-diol 10 by 1 (Scheme 2, Table 3) also proceeded in fair yields to give the disaccharides 44–47 (69–80%;1,2-/1,3-linked products ca. 1:1), 48–51 (51–61%;1,2/-1,3-linked products 54–56:56–54), and 56/57/60/61 (71–80%; 1,3-/1,4-linked products 49–54:51–46), respectively. The 1,3-linked disaccharides 56/57 derived from the diol 10 were characterized as the acetates 58/59 . The regio- and stereoselectivities of the glycosidation by 1 were much better for the α-D -manno-configurated axial, equatorial cis-2,3-diol 11 and the galacto-configurated axial, equatorial cis-3,4-diol 13 (1,2-/1,3-linked disaccharides ca. 3:7 for 11 and 1,3-/1,4-linked disaccharides ca. 4:1 for 13 ; Scheme 3, Table 4). The regio- and stereoselectivity for the β-D -manno-configurated cis-2,3-diol 12 were, however, rather poor (1,2-/1,3-linked products 48:52). The 1,2-linked disaccharides 66/67 derived from 12 were characterized as the acetates 70/71 . Koenigs-Knorr-type glycosidation of the cis-diols 11–13 by 2 or 3 proceeded with a similar regio- and a higher stereoselectivity (α-D > β-D with the donor 2 and α-D < β-D with the donor 3 ) than with 1 , with the exception of 12 which did not react with 2 . The regioselectivity of the glycosidations by 1 agrees fully with the H-bonding scheme of the diols and with the hypothesis that the intermediate carbene is preferentially protonated by the most weakly H-bonded OH group. The regioselectivity of the glycosidation by 2 and by 3 is determined by a higher reactivity of the equatorial OH groups and by H-bonding. Several H-bonded and equilibrating isomers of a given diol may intervene in the glycosidation by 1 , or by 2 and 3 , resulting in the same regioselectivity. The low nucleophilicity of 12 and the low degree of regioselectivity in its reaction with 3 show that stereoelectronic effects may also profoundly influence the nucleophilicity of OH groups.     

Thermal and Ru-catalyzed Reactions of Styryl-Substituted Azulenes with Dimethyl Acetylenedicarboxylate

The thermal reaction of 1-[(E)-styrl]azulenes with dimethyl acetylenedicarboxylate (ADM) in decalin at 190–200° does not lead to the formation fo the corresponding heptalene-1,2-dicarboxylates (Scheme 2). Main products are the corresponding azulene-1,2-dicarboxylates (see 4 and 9 ), accompanied by the benzanellated azulenes trans- 10a and trans- 11 , respectively. The latter compounds are formed by a Diels-Alder reaction of the starting azulenes and ADM, followed by an ene reaction with ADM (cf. Scheme 3). The [RuH₂(PPh₃)₄]-catalyzed reaction of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes (R=H, MeO, Cl; Scheme 4) with ADM in MeCN at 110° yields again the azulene-1,2-dicarboxylates as main products. However, in this case, the corresponding heptalene-1,2-dicarboxylates are also formed in small amounts (3–5%; Scheme 4). The benzanellated azulenes trans- 10a and trans- 10b are also found in small amounts (2–3%) in the reaction mixture. ADM Addition products at C(3) of the azulene ring as well as at C(2) of the styryl moiety are also observed in minor amounts (1–3%). Similar results are obtained in the [RuH₂(PPh₃)₄]-catalyzed reaction of 3-[(E)-styryl]guaiazulene ((E)- 8 ; Scheme 5) with ADM in MeCN. However, in this case, no heptalene formation is observed, and the amount of the ADM-addition products at C(2) of the styryl group is remarkably increased (29%). That the substitutent pattern at the seven-membered ring of (E)- 8 is not responsible for the failure of heptalene formation is demonstrated by the Ru-catalyzed reaction of 7-isopropyl-4-methyl-1-[(E)-styryl]azulene ((E)- 23 ; Scheme 11) with ADM in MeCN, yielding the corresponding heptalene-1,2-dicarboxylate (E)- 26 (10%). Again, the main product is the corresponding azulene-1,2-dicarboxylate 25 (20%). Reaction of 4,6,8-trimethyl-2-[(E)-styryl]azulene ((E)- 27 ; Scheme 12) and ADM yields the heptalene-dicarboxylates (E)- 30A / B , purely thermally in decalin (28%) as well as Ru-catalyzed in MeCN (40%). Whereas only small amounts of the azulene-1,2-dicarboxylate 8 (1 and 5%, respectively) are formed, the corresponding benzanellated azulene trans- 29 ist found to be the second main product (21 and 10%, respectively) under both reaction conditions. The thermal reaction yields also the benzanellated azulene 28 which is not found in the catalyzed variant of the reaction. Heptalene-1,2-dicarboxylates are also formed from 4-[(E)-styryl]azulenes (e.g. (E)- 33 and (E)- 34 ; Scheme 14) and ADM at 180–190° in decalin and at 110° in MeCN by [RuH₂(PPh₃)₄] catalysis. The yields (30%) are much better in the catalyzed reaction. The formation of by-products (e.g. 39–41 ; Scheme 14) in small amounts (0.5–5%) in the Ru-catalyzed reactions allows to understand better the reactivity of zwitterions (e.g. 42 ) and their triyclic follow-up products (e.g. 43 ) built from azulenes and ADM (cf. Scheme 15).     

Regio-, Diastereo-, and Enantioselective Synthesis of Vicinal Diols via α-Silyl Ketones

A new versatile and efficient regio-, diastereo-, and enantioselective synthesis of vicinal diols s-trans- 4 , s-trans- 5 , and s-cis- 4 is described. Symmetrical ketones are converted into their SAMP-or RAMP-hydrazones which are then silylated with (isopropyloxy)dimethylsilyl chloride, followed by ozonolysis to afford the α-silyl ketones (R)- 2 of high enantiomeric purity (ee 90– ≥ 98%). On the other hand, methyl ketones, after conversion into the corresponding (?)–(S)-1-amino-2-(methoxymethyl) pyrrolidine (SAMP) hydrazones, are silylated and then alkylated with RI to afford unsymmetrical α-silyl ketones (S)- 3 of high enantiomeric purity (ee 90- ≥ 98%). The reduction of the above obtained α-silyl ketones with L -Selectride, followed by oxidative cleavage of the C? Si bond gives rise to s-trans-4, s-trans- 5 , and s-cis- 4 with high diastereoselectivity (de 95- ≥ 98%) and without racemization (ee ≥ 90– ≥ 98%).     

2-Phosphorylation of D-Erythorbic Acid

Abstract

D-Erythorbate 2-phosphate (3) was prepared by phos phorylation of 5, 6-0-isopropylidene-D-erythorbate (5) with phosphoryl chloride at high pH in the presence of pyridine. Following removal of the 5, 6-acetal, a crude magnesium salt of 3 was isolated in 67–71% yield. The salt contained 74% of 3, 9% of D-erythorbate 2-diphosphate (7), and 5% of bis-(D-erythorbyl) 2, 2′-phosphate (6). Analytically pure 3 was obtained as its crystalline magnesium and tricyclohexyl-ammonium salts in 26 and 47% yields, respectively, from 5.     

Sesquiterpenoids of the Sponge Dysidea fragilis of the North-Brittany Sea

The title sponge is shown to contain eight new sesquiterpenoids for which a common, unusual biogenetic origin is postulated. The compounds are shown to be: (–)-(1R*,4R*)-3-(3′-furyl)methyl-2-p-menthen-7-yl acetate ((–)- 8b ); two diols separated as the monoacetates (–)-(1S*,4R*)-3-(3′-furyl)methyl-l-hydroxy-2-p-menthen-7-yl acetate ((–)- 13a ) and the (–)-(1R*,4R*)-epimer (–)- 13b , the two C(4)-epimeric 4-ethoxy-3-(1′(7′),2′-p-menthadien-3′-yl)methyl-2-buten-4-olides ((+)- 14a and (–)- 14b ), (–)-3-(3′-furyl)methyl-7-nor-2-p-menthen-l-one ((–)- 11 ), (–)-(3Z)-1-(3′-furyl)-4,8-dimethylnona-3, 7-dien-2-yl acetate ((–)- 17 ), and (+)-3-(5′,7′-seco-2′(10′)-pinen-7′-yl)methylfuran ((+)- 15 ).     

Studies in spiroheterocycles,Part XV. Investigation of the reaction of 3-(2-oxocycloalkylidene)-indol-2-ones with thiourea and urea derivatives

The reaction of 3-(2-oxocycloalkylidene)indol-2-one 1 with thiourea and urea derivatives has been investigated. Reaction of 1 with thiourea and urea in ethanolic potassium hydroxide media leads to the formation of spiro-2-indolinones 2a-f in 40–50% yield and a novel tetracyclic ring system 4,5-cycloalkyl-1,3-diazepino-[4,5-b]indole-2-thione/one 3a-f in 30–35% yield. 3-(2-Oxocyclopentylidene)indol-2-one afforded 5′,6′-cyclopenta-2′-thioxo/ oxospiro[3H-indole-3,4′(3′H)pyrimidin]-2(1H)-ones 2a,b and 3-(2-oxocyclohexylidene)indol-2-one gave 2′,4′a,5′,6′,7′,8′- hexahydro-2′-thioxo/oxospiro[3H-indole-3,4′ (3′H)-quinazolin]-2(1H)-ones 2c-f . Under exactly similar conditions, reaction of 1 with fluorinated phenylthiourea/cyclohexylthiourea/phenylurea gave exclusively spiro products 2g-1 in 60–75% yield. The products have been characterized by elemental analyses, ir pmr. ¹⁹F nmr and mass spectral studies.     

Synthesis and characterization of new polyamides derived from 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane

A series of new polyamides 3 were synthesized by direct polycondensation of the 1,6-bis[4-(4-aminophenoxy)phenyl]diamantane (1) with various dicarboxylic acids. The polyamides had inherent viscosities of 0.45–1.90 dL/g and number-average molecular weights (M_n) of 24,000–110,000. Dynamic mechanical analysis (DMA) reveals that polymers 3 have two relaxations on the temperature scale between −100 and 400°C. Their α relaxations occurred at high temperatures, ranging from 338 to 389°C. Moreover, these polymers remained quite stable at high temperatures and maintained good mechanical properties (G′ = ca. 10⁸ Pa) up to temperatures close to the main transition markedly exceeding 350°C. Due to the bulky diamantane elements and the flexible ether segments, the polymers 3 were amorphous and soluble in a number of organic solvents such as pyridine, N-methyl-2-pyrrolidone (NMP), and N,N-dimethylacetamide (DMAc). The polyamides 3 have tensile strengths of 56.7–90.2 MPa, elongation to breakage values of 7.5–27.7%, and initial moduli of 1.8–2.1 GPa. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2185–2192, 1998     

L-Proline-Catalyzed Knoevenagel Condensation: A Facile,Green Synthesis of (E)-Ethyl 2-Cyano-3-(1H-indol-3-yl)acrylates and (E)-3-(1H-Indol-3-yl)acrylonitriles

L-Proline has been utilized as a novel and ecofriendly catalyst in ethanol medium for the Knoevenagel condensation of indole-3-carboxyaldehydes and their N-methyl derivatives 1(a–e) and 4(a–e) with the active methylene compound, ethyl cyanoacetate (2) to afford substituted (E)-ethyl 2-cyano-3-(1H-indol-3-yl)acrylates 3(a–e) and 5(a–e) respectively. These products were reacted with dimethyl sulfate in the presence of PEG-600 as an efficient and green solvent to afford the corresponding N-mthylated derivatives 5(a–e). These Knoevenagel products react with 5% NaOH, yielding (E)-3-(1H-indol-3-yl)acrylonitriles 6(a–e) and 7(a–e).     

Synthesis and absorption/emission properties of novel poly(silylenearylenevinylene)s

Polymerization of p-(dimethylsilyl)phenylacetylene in toluene at 25 and 80 °C with RhI(PPh₃)₃ catalyst afforded highly regio- and stereoregular poly(dimethylsilylene-1,4-phenylenevinylene)s [cis- and trans-poly( 1a )s] containing 98% cis- and 99% trans-vinylene moieties, respectively. The trans-type polymers exhibited redshifts and hyperchromic effects in the ultraviolet–visible spectrum as compared with the cis-type counterparts. Photoirradiation of cis- and trans-poly( 1a )s gave cis-rich mixtures at equilibrium states. The trans and cis polymers exhibited different emission properties, for example—trans polymer, emissn λ_max = 400 nm, quantum yield: 3.4 × 10⁻³ and cis polymer, emissn λ_max = 380 nm, quantum yield: 1.5 × 10⁻³. Besides poly( 1a ), poly(dimethylsilylenearylenevinylene)s containing biphenylene and phenylenesilylenephenylene units [poly( 3 )] were prepared. The extent of conjugation in these polymers decreased in the orders of biphenylene > phenylene > phenylenesilylenephenylene as well as trans-vinylene > cis-vinylene. The quantum yield of the trans-rich polymer with biphenylene moiety was fairly large and 0.15. Polyaddition of 1,4-bis(dimethylsilyl)benzene and three types of diethynylarenes (4,4′-diethynylbiphenyl, 2,7-diethynylfluorene, and 2,6-diethynylnaphthalene) catalyzed by RhI(PPh₃)₃ provided novel regio- and stereoregular polymers [poly( 6 )]. These polymers displayed blue light emission with high quantum yields (4–81%). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3615–3624, 2003