The hydrogen bonding and conformations of p-tert-butylcalix[4]arene as studied by IR spectroscopy and by DFT calculations

IR and far IR spectra of p-tert-butylcalix[4]arene were recorded at various temperatures between 16 and 180 degrees C and spectra of solutions and crystalline solids were obtained. Ab initio density functional calculations gave vibrational frequencies and infrared intensities for four conformers: cone, partial cone, 1,2- and 1,3-alternate. Complete assignments were made for experimental IR spectra of the cone conformer. The bands characteristic for each conformation were defined. It was revealed that O--H stretching low-frequency shift Deltanu in the cone conformation exceeds Deltanu shifts for other conformers. The effect was stipulated by a cooperative interaction of cyclic hydrogen bonds. The obtained spectra-structure correlation can be used for characteristic of calixarenes conformation.     

Aminolysis of p-tert-butyltetrathiacalix[4]arene tetraethylacetates in cone, partial cone and 1,3-alternate conformation: synthesis of amide based receptors for oxyanions

Cone, partial cone and 1,3-alternate conformers of tetrathiacalix[4]arene tetraethylacetate were synthesized and subjected to aminolysis with alkyl amines [CH₃(CH₂)_nNH₂; n=2, 3, 5] to yield mono-, di-, tri- or tetrasubstituted p-tert-butyltetrathiacalix[4]arene amides which were characterized by detailed analysis of their NMR spectral and single crystal X-ray crystallography. It has been observed that while the 1,3-alternate and cone conformers of the tetrathiacalix[4]arene tetraethylacetate gave corresponding tetrathiacalix[4]arene tetraamides under different experimental conditions, the corresponding partial cone conformer undergoes a cascade of regioselective reactions with the same amines. Variable temperature ¹H NMR experiments allowed the determination of relative stability of different conformers within the temperature range of 298-333 K. The synthesized derivatives were evaluated as molecular extractants for cations and anions and were determined to facilitate extraction of oxyanions (CrO₄²⁻ and Cr₂O₇²⁻) from aqueous to the organic phase. The studies have a significance in the design of tetrathiacalix[n]arene based molecular receptors for innovative applications.     

Synthesis and Conformational Studies of Lower Rim Cyanomethyl Substituted Calix[4]arenes

The conformational inversion characteristics of calix[4]arenes carrying cyanomethyl groups on the lower rim have been investigated. Complete conversion from a 1,3-alternate to a partial cone conformation was observed for the 1,3-dicyanomethyl ether of calix[4]arene at room temperature, while at higher temperatures further inversion to a 1:1 mixture of partial cone and cone conformers occurred.     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Conformational properties of cyanomethoxy calix[4]arenes

O-Alkylation of the dinitro calix[4]arene 2, easily available by selective ipso-nitration of the di-cyanomethyl ether 1, with allylbromide (DMF/Cs2CO3) gave tetraethers 3 and 4 with anti- and syn-orientations of the two allyl ether residues. The two possible stereoisomers of in the partial cone and 1,2-alternate conformation exist as an equilibrium mixture which could be quantitatively analysed by 1H NMR spectroscopy. The temperature dependence of this equilibrium leads to deltaH0 = -7.6 to -9.7 kJ mol(-1) in different solvents (tetrachloroethane, benzene, dimethylsulfoxide). Since 3(1,2-alt) could be obtained in pure form, its isomerisation to the equilibrium mixture with 3(paco) could be followed also kinetically. An activation energy of E(a) = 110.5 kJ mol(-1) was found for this reaction in DMSO-d6. The results were confirmed by similar studies with tetraethers 5 and 6 obtained by O-allylation of 1, although exact thermodynamic and kinetic studies were not possible in this case, since the NMR signals of the respective isomers were strongly overlapping. Single crystal X-ray structures were obtained for 2, 3(1,2-alt), 4(paco) and 5(1,2-alt).     

The selective dealkylations: the formylations of the three easily accessible calix[4]arene conformers immobilized by propyl and isopropyl groups

Formyl groups were introduced to the para positions of the three easily accessible calix[4]arene conformers immobilized by four propyl or isopropyl groups by Duff reaction. Propyl group led to exhaustively formylated products due to the weak steric hinderance effect. While as for the isopropoxy calix[4]arenes, with the increase of steric hinderance, 1,3-alternate conformer gave exhaustively formylated product with no alkyl group dealkylating; partial cone conformer gave the tetraformylated proximal A,B-diether in 1,3-alternate conformation; and cone conformer led to triformylated derivatives accompanied by the selective dealkylations of three or two diametrical alkyl groups. The results indicated that the structures of the products were greatly influenced by the steric hinderance effect of the starting compounds.     

Calix[4]arene‐Based Bis(Nitric Oxide) Complexes: Synthesis,Physical Properties,and Structural Characterization

Calix[4]arene‐based molecules hold great promise as candidate sensors and storage materials for nitric oxide (NO), owing to their unprecedented binding affinity for NO. However, the structure of calix[4]arene is complicated by the availability of four possible conformers: 1,3‐alternate, 1,2‐alternate, cone, and partial cone (paco). Whilst complexes of NO with several of these conformers have previously been established, the 1,2‐alternate conformer complex, that is, [1,2‐alter ? NO]⁺, has not been previously reported. Herein, we determine the crystal structure of the NO complex with the 1,2‐alternate conformer for the first time. In addition, we have also found that the 1,2‐alternate and 1,3‐alternate conformers can combine with two NO molecules to form stable bis(nitric oxide) complexes. These new complexes, which exhibit remarkable binding capacity for the construction of NO‐storage molecules, were characterized by using X‐ray crystallography and NMR, IR, and UV/Vis spectroscopy. These findings will extend our understanding of the interactions between nitric oxide and cofacially and non‐cofacially arrayed aromatic rings, and we expect them to aid in the design and development of new supramolecular sensors and storage materials for NO with high capacity and efficacy.     

Impact of multiple cation-pi interactions upon calix[4]arene substrate binding and specificity

The cation-pi interaction influence on the conformation and binding of calix[4]arenes to alkali-metal cations has been studied using a dehydroxylated model. The model allows for the separation of cooperative cation-pi and electrostatic forces commonly found in the binding motifs found in calixarene complexes. Starting from the four well-known calix[4]arene conformations, six conformers for this dehydroxylated model (cone, partial cone, flattened cone, chair, 1,2-alternate, and 1,3-alternate) have been characterized by geometry optimization and frequency analysis using the Becke three-parameter exchange functional with the nonlocal correlation functional of Lee, Yang, and Parr and the 6-31G(d) basis set. Without the stabilization provided by the hydroxyl hydrogen bonds in calix[4]arene, neither the cone nor the 1,2-alternate conformation is computed to be a ground-state structure. The partial cone, flattened cone, chair, and 1,3-alternate conformers have been identified as ground-state structures in a vacuum, with the partial cone and the 1,3-alternate as the lowest energy minima in the aromatic model. The C(4)(v)() cone conformation is found to be a transition structure separating the flattened cone (C(2)(v)()) conformers. The energetic and structural preferences of the calix[4]arene model change dramatically when it is bound to Li(+), Na(+), and K(+). The number of pi-faces, the positioning of these pi-faces with respect to the cations, and the nature of the cation were studied as factors in the binding strength. A detailed study of the distances and angles between the aromatic ring centroids and the cations reveals the energetic advantages of multiple weak cation-pi interactions. The geometries are often far from the optimal cation-pi interaction in which the cation approaches in a perpendicular path the aromatic ring center, where the quadrupole moment is strongest. The results reveal that multiple weaker nonoptimal cation-pi interactions contribute significantly to the overall binding strength. This theoretical analysis underscores the importance of neighboring aromatic faces and provides new insight into the significance of cation-pi binding, not only for calix[4]arenes, but also for other supramolecular and biological systems.     

Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Formation and conformational conversion of flattened partial cone oxygen bridged calix[2]arene[2]triazines

A stepwise fragment coupling reaction starting with substituted dichlorotriazine and resorcinol derivatives gave rise to thermodynamically favored 1,3-alternate tetraoxacalix[2]arene[2]triazines and kinetically controlled flattened partial cone tetraoxacalix[2]arene[2]triazines. The flattened partial cone conformer, which was stable due to the steric effect, converted into the 1,3-alternate conformer via ether bond cleavage upon treatment with an inorganic base.     

Synthesis and conformational evaluation of p-tert-butylthiacalix[4]arene-crowns

Bridging of p-tert-butylthiacalix[4]arene afforded 1,3-dihydroxythiacalix[4]arene-monocrown-5 (3b), 1,2-alternate thiacalix[4]arene-biscrown-4 and -5 (4a,b), and 1,3-alternate thiacalix[4]arene-biscrown-5 and -6 (5a,b), depending on the metal carbonates and oligoethylene glycol ditosylates used. Starting from 1,3-dialkylated thiacalix[4]arenes, the corresponding bridging reaction gave 1,3-alternate, partial-cone, and cone conformers 10-19, depending on the substituents present. Temperature-dependent studies revealed that the conformationally flexible 1,3-dimethoxythiacalix[4]arene-crowns 10a-c exclusively occupy the 1,3-alternate conformation. Demethylation exclusively gave the cone 1,3-dihydroxythiacalix[4]arene-crowns (3a,c), which could not be obtained by direct bridging of thiacalix[4]arene. The different structures were assigned on the basis of several X-ray crystal structures and extensive 2-D (1)H NMR studies.     

The Preorganization Effect of the Calix[4]arene Platform on the Extraction Properties of Acetylhydrazide Groups with Transition Metal Ions

The binding properties of the cone conformer of O,O,O,O-tetrakis[hydrazinocarbonylmethyl]-4-tert-butylcalix[4]arene, the cone and the 1,3-alternate conformers of the corresponding thia analogue have been evaluated by means of liquid–liquid extraction for a large variety of metal ions. The extraction constants and the stoichiometries of the complexes formed have been determined. Comparison of the extraction properties of calix[4]arenes with their acyclic monomeric analogue clearly demonstrated, that the preorganization of acetylhydrazide groups on the calix[4]arene platform is the cause for a significant improvement of its binding properties. The presence of additional “soft” nitrogen binding sites in acetylhydrazide derivatives of calix[4]arenes compared to their amide derivatives leads to a shift from their classical selectivity for alkali and alkaline earth cations to transition metals. The cone conformer of tetrathiacalix[4]arene shows higher selectivity in a series of d-metal ions compared with its “classical” analogue. The 1,3-alternate conformer exhibits an excellent extraction selectivity for Cu²⁺ and Hg²⁺.     

Syntheses and conformational structures of functionalized tetraoxacalix[2]arene[2]triazines

The syntheses and conformational structures of various functionalized tetraoxacalix[2]arene[2]triazines were studied. Applying the fragment coupling approach and the post-macrocyclization chemical manipulations, a number of tetraoxacalix[2]arene[2]triazines that contain, on the lower rim, one or two aldehyde, ester, carboxylic acid, hydroxymethyl, and aminomethyl functional groups were prepared in moderate to high chemical yields from cheap and commercially available materials. On the basis of X-ray crystallography and NMR spectroscopy, all tetraoxacalix[2]arene[2]triazines containing electron-withdrawing group(s) adopted 1,3-alternate conformation both in solution and in the solid state, while tetraoxacalix[2]arene[2]triazines bearing hydroxymethyl and aminomethyl substituent(s) existed as pinched or distorted partial cone conformers due to the formation of intramolecular hydrogen bond between hydroxyl or amino group and triazine ring.     

IR and NMR spectra,intramolecular hydrogen bonding and conformations of para-tert-butyl-aminothiacalix[4]arene in solid state and chloroform solution

It is demonstrated that dissolution of aminothiacalix[4]arene in chloroform results in transformation of 1,3-alternate conformation, adopted in single-crystal and bulk polycrystalline solids, to the pinched-cone form. This conformer is stabilised by the intramolecular hydrogen bonds of two distal amino-groups acting as H-donors with another two amino moieties that appear as H-acceptors. The H-bonds cause quite small (ca. 10–20 cm^?1) red shift of the IR bands of the NH₂ stretching vibrations, which suggests rather weak NH?N hydrogen bonding. This latter is sufficient to stabilize the pinched-cone conformation in the chloroform solution, but the energy gap between the pinched-cone and other conformations is small, and solid-state intermolecular forces easily overcome it, leading to realisation of the 1,3-alternate conformer. The comparison of the DFT computed and experimental vibrational and NMR spectra demonstrates good quality of present quantum-chemical computations, allows complete interpretation of the spectra and reveals simple IR and NMR spectroscopic markers of the conformers of aminothiacalix[4]arenes.     

Synthesis of (thia)calix[4]arene oligomers: towards calixarene-based dendrimers

Thiacalix[4]arenes bearing two or four carboxylic functions on the lower rim served as starting compounds for the synthesis of novel calixarene oligomers connected by amidic functions. The cone conformers react smoothly with four molecules of 5-amino-calix[4]arene to yield the corresponding pentakis-calixarenes. On the other hand, because steric hindrance, the 1,3-alternate condenses only with two molecules leading thus to tris-calixarene, possessing a novel type of inherent chirality based on the 25,26-substitution pattern. The title compounds, which connect together ‘classical’ calixarene and thiacalixarene building blocks, represent a first step towards calixarene-based dendritic structures.     

Synthesis of a phloroacetophenon[4]arene consisting of four isomers via the one-pot,acid-catalysed condensation of phloroacetophenone with benzaldehyde

A phloroacetophenon[4]arene (3) consisting of four isomers was synthesised for the first time via the condensation of phloroacetophenone and benzaldehyde in a one-pot reaction with refluxing toluene in the presence of catalytic amounts of TsOH·H₂O for a maximum yield of 64%. The conformational elucidation of four isomers (3a–d) by ¹H NMR spectroscopy and X-ray crystal structure analysis showed them to be cone, partial cone, 1,3-alternate and 1,2-alternate types of conformations, respectively.     

Preparation and conformation of dioxocalix[4]arene derivatives

CrO(3) oxidation experiments conducted on atropisomeric forms of 2 (2(paco), 2(1,3)(-)(alt), and 2(1,2)(-)(alt)) indicate that under the reaction conditions only methylene groups located between pairs of geminal rings oriented in an anti disposition are oxidized to carbonyls. NMR data suggest that the tetrahydroxydioxocalix[4]arenes 7 and 9 adopt the partial cone and 1,2-alternate conformations, respectively. In the crystal structure of 7.2EtOAc the dioxocalixarene adopts a partial cone conformation, whereas 9 adopts in the crystal a 1,2-alternate conformation. In both conformations, pairs of geminal rings connected to a carbonyl are oriented in an anti fashion. The relative stability of the partial cone and 1,2-alternate conformations of 7 and 9 is underestimated by MM3 calculations. The topomerization barriers of 7 and 9 are 12.8 and 13.6 kcal mol(-)(1), respectively.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Synthesis and Cesium Binding Affinity of New 25,27-Bis(alkyloxy)calix[4]arene-crown-6 Conformers in Relation to the Alkyl Pendent Moiety

The preparation of new 25,27-bis(alkyloxy)calix[4]arenes-crown-6 in the cone, partial-cone and 1,3-alternate conformation is reported. We have also investigated the alkylation of the cone monoalkylated calix[4]arene-crown-6 achieved using Cs 2 CO 3 . This reaction afforded a mixture of cone and partial-cone calix[4]arenes-crown-6 having an alkyl chain anti or syn to the polyether ring. Conformations have been probed using 1 H, 13 C, 2D-NMR and NOESY analysis, and using X-ray crystallography. Extraction experiments using a two-phase solvent method involving cesium picrate were performed for these newly synthesized conformers. They reveal and confirm the strong preference for the 1,3-alternate conformers. The affinity of 1,3-alternate calixarenes for Cs + has been assessed by complexation measurements (log g ) using a spectrophotometric technique. No significant Cs + extraction difference was observed in relation to the nature of the alkyl chains on the aromatic rings. 1 H NMR studies of the 1,3-alternate calixarene Cs + complexes confirms the cation's spacial position between the two aromatic rings, due to cation- ~ interactions.     

Complexation properties and characterization of four conformers of a [2.1.2.1]metacyclophane

Cone, partial cone, 1,2-alternate, and 1,4-alternate conformers of tetrakis[(ethoxycarbonyl)-methoxy] [2.1.2.1]metacyclophane (MCP,2) were isolated and characterized by¹H-NMR and an X-ray crystal structure analysis of the 1,4-alternate conformer. Of the four conformers, only the cone conformer2d forms a complex with alkali metals. The stability constants of2d with alkali metal ions were determined by the direct¹H-NMR method and UV spectra, and the order observed as potassium cesium, sodium ions.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.