Excess enthalpies of { ethyl tert -butylether + hexane + heptane,or octane } at the temperature 298.15 K

Excess molar enthalpies, measured at the temperature 298.15 K in a flow microcalorimeter, are reported for the ternary mixtures {x₁CH₃CH₂OC(CH₃)₃ + x₂CH₃(CH₂)₄CH₃ + (1  − x₁ − x₂)CH₃(CH₂)₅CH₃} and {x₁CH₃CH₂OC(CH₃)₃ + x₂CH₃(CH₂)₄CH₃ + (1  − x₁ − x₂)CH₃(CH₂)₆CH₃}. Smooth representations of the results are described and used to construct constant-enthalpy contours on Roozeboom diagrams. It is shown that useful estimates of the enthalpies of the ternary mixtures can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

(Liquid + liquid) equilibria of ternary and quaternary systems containing n-hexane,toluene, m-xylene,propanol, sulfolane,and water at T = 303.15 K

(Liquid + liquid) equilibrium data for ternary and quaternary systems containing n-hexane (C₆H₁₄), toluene (C₇H₈), m-xylene (C₈H₁₀), propanol (C₃H₈O), sulfolane (C₄H₈SO₂), and water (H₂O) were measured at T = 303.15 K. Phase diagrams of {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₈H₁₀ + (1 − w₁ − w₂)C₆H₁₄}, {w₁C₄H₈SO₂ + w₂C₃H₈O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and also systems containing water: {w₁C₄H₈SO₂ + w₂H₂O + w₃C₇H₈ + (1 − w₁ − w₂ − w₃)C₆H₁₄} and {w₁C₄H₈SO₂ + w₂H₂O + w₃C₈H₁₀ + (1 − w₁ − w₂ − w₃)C₆H₁₄} (w = mass fraction) were obtained at T = 303.15 K. The (liquid + liquid) equilibrium data of the systems were used to obtain interaction parameters in non-random two-liquid (NRTL) and universal quasi-chemical theory (UNIQUAC) activity coefficient models. These parameters can be used to predict equilibrium data of ternary and quaternary systems. The root mean square deviations (RMSDs) using these models were calculated and reported. The partition coefficients and the selectivity factors of solvents for extraction of toluene or m-xylene from n-hexane at T = 303.15 K are calculated and presented. The experimental selectivity factors of sulfolane for the system {w₁C₄H₈SO₂ + w₂C₇H₈ + (1 − w₁ − w₂)C₆H₁₄} at T = 298.15 K and T = 323.15 K were taken from the literature and the influence of temperature on the extraction of toluene was also investigated. The phase diagrams for the ternary and quaternary systems including both the experimental and correlated tie lines are presented. The tie-line data of the studied systems were also correlated using the Hand equation and the correlation parameters are calculated and reported.     

Excess enthalpies and excess heat capacities of binary mixtures of (cyclohexanone,or 2-butanone,or 1,4-dioxane + 1,2-dimethoxyethane) and (1,4-dioxane + 1,2-dimethoxyethane) atT = 298.15 K

Excess enthalpies and excess heat capacities of { x 2-butanone  +  (1  − x)1,4-dioxane}, and { x cyclohexanone, or 2-butanone, or 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were measured atT =  298.15 K. Excess enthalpies were negative for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane}, and negative with a small positive part in the region ofx >  0.8 for { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, whereas excess enthalpies of { x 2-butanone  +  (1  − x)1,4-dioxane} were positive as for { x cyclohexanone  +  (1  − x)1,4-dioxane} previously reported. Excess enthalpies of {x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane} were positive. The results were compared with the systems reported earlier. Excess heat capacities are positive for { x 2-butanone  +  (1  − x)1,2-dimethoxyethane} and { x cyclohexanone  +  (1  − x)1,2-dimethoxyethane}, and negative for { x 2-butanone  +  (1  − x)1,4-dioxane} and { x 1,4-dioxane  +  (1  − x)1,2-dimethoxyethane}. The last mixture shows a W-shaped curve of excess heat capacity.     

Excess molar enthalpies of ternary mixtures (dibutyl ether or dipropyl ether + 2,2-dimethylbutane + 2,3-dimethylbutane) at the temperature 298.15 K

Excess molar enthalpies, measured at the temperature 298.15 K and atmospheric pressure conditions by means of a flow microcalorimeter, are reported for the ternary mixtures {x₁(dibutyl ether or dipropyl ether) + x₂ 2,2-dimethylbutane + (1 ? x₁ ? x₂) 2,3-dimethylbutane}. A smooth representation of the results is described and the constant-enthalpy contours for each ternary system are displayed on the respective Roozeboom diagrams. The results serve to show that good estimates of the excess molar enthalpies of the ternary systems can be obtained from the Liebermann–Fried model by using the physical properties of the constituent pure components and the parameters determined from the binary mixtures of these components.     

Near critical measurements of HmE andVmE for (ethane + sulphur hexafluoride)

A flow mixing calorimeter and a vibrating-tube densimeter have been used to measure excess molar enthalpies H_m^E and excess molar volumes V_m^E of {xC₂H₆ +  (1  − x)SF₆ }. Measurements over a range of mole fractions x have been made at T =  305.65 K and T =  312.15 K and at the pressures (3.76, 4.32, 4.88 and 6.0) MPa. The pressure 3.76 MPa is close to the critical pressure of SF₆, the pressure 4.88 MPa is close to the critical pressure of C₂H₆, and the pressure 4.32 MPa is midway between these values. The measurements are compared with the Patel–Teja equation of state which reproduces the main features of the excess function curves as well as it does for similar measurements on {xCO₂ +  (1  − x)C₂H₆ }, {xCO₂ +  (1  − x)C₂H₄ } and {xCO₂ +  (1  − x)SF₆ }.     

Measurements of HmE and VmE for (propane + sulphurhexafluoride) in the near critical region

A flow mixing calorimeter followed by a vibrating-tube densimeter has been used to measure excess molar enthalpies H_m^E and excess molar volumesV_m^E of {xC₃H₈ +  (1  − x)SF₆}. Measurements over a range of mole fractionsx have been made at the pressure p =  4.30 MPa at eight temperatures in the rangeT =  314.56 K to 373.91 K, in the liquid region at p =  3.75 MPa andT =  314.56 K, in the two phase region at p =  3.91 MPa andT =  328.18 K, and in the supercritical region at p =  5.0 MPa andT =  373.95 K. The measurements are compared with results from the Patel–Teja equation of state which reproduces the main features of the excess function curves as well as it does for similar measurements on{xCO₂ +  (1  − x)C₂H₆} ,{xCO₂ +  (1  − x)C₂H₄} and{xCO₂ +  (1  − x)SF₆} reported previously.     

Volumetric properties of ternary (IL + 2-propanol or 1-butanol or 2-butanol + ethyl acetate) systems and binary (IL + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate) systems

The experimental densities for the binary or ternary systems were determined at T = (298.15, 303.15, and 313.15) K. The ionic liquid methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]⁺[Tf₂N]⁻) was used for three of the five binary systems studied. The binary systems were ([MOA]⁺[Tf₂N]⁻ + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate). The ternary systems were {methyl trioctylammonium bis(trifluoromethylsulfonyl)imide + 2-propanol or 1-butanol or 2-butanol + ethyl acetate}. The binary and ternary excess molar volumes for the above systems were calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was fitted to the binary excess molar volume data. Virial-Based Mixing Rules were used to correlate the binary excess molar volume data. The binary excess molar volume results showed both negative and positive values over the entire composition range for all the temperatures.The ternary excess molar volume data were successfully correlated with the Cibulka equation using the Redlich–Kister binary parameters.     

(Liquid + liquid) equilibria of the (water + butyric acid + dodecanol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the (water + butyric acid + dodecanol) ternary system have been determined experimentally at T = (298.2, 308.2 and 318.2) K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie lines was confirmed by using the Othmer–Tobias correlation. The UNIFAC method was used to predict the phase equilibrium in the ternary system using the interaction parameters determined from experimental data of CH₃, CH₂, COOH, OH and H₂O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Pitzer ion-interaction parameters for Fe(II) and Fe(III) in the quinary {Na + K + Mg + Cl + SO4 + H2O} system at T=298.15 K

This paper describes a chemical model that calculates (solid + liquid) equilibria in the {m₁FeCl₂ + m₂FeCl₃}(aq), {m₁FeSO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁NaCl + m₂FeCl₃}(aq), {m₁Na₂SO₄ + m₂FeSO₄}(aq), {m₁NaCl + m₂FeCl₂}(aq), {m₁KCl + m₂FeCl₃}(aq), {m₁K₂SO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁KCl + m₂FeCl₂}(aq), {m₁K₂SO₄ + m₂FeSO₄}(aq), and {m₁MgCl₂ + m₂FeCl₂}(aq) systems, where m denotes molality at T=298.15 K. The Pitzer ion-interaction model has been used for thermodynamic analysis of the experimental activity data in binary FeCl₂(aq) and FeCl₃(aq) solutions, and ternary solubility data, presented in the literature. The thermodynamic functions needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherms have been plotted. The mixed solution model parameters {θ(MN) and ψ(MNX)} have been chosen on the basis of the compositions of saturated ternary solutions and data on the pure water solubility of the K₂SO₄ · FeSO₄ · 6H₂O double salt. The standard chemical potentials of four ferrous {FeCl₂ · 4H₂O, Na₂SO₄ · FeSO₄ · 4H₂O, K₂SO₄ · FeSO₄ · 6H₂O, and MgCl₂ · FeCl₂ · 8H₂O} and three ferric {FeCl₃ · 6H₂O, 2KCl · FeCl₃ · H₂O, and 2K₂SO₄ · Fe₂(SO₄)₃ · 14H₂O} solid phases have been determined. Comparison of solubility predictions with experimental data not used in model parameterization is given. The component activities of the saturated {m₁MgSO₄ + m₂FeSO₄}(aq) and in the mixed crystalline phase were determined and the change of the molar Gibbs free energy of mixing Δ_mixG^∘_m(s) of crystals was determined as a function of the solid phase composition. It is established that at T=298.15 K the mixed (Mg,Fe)SO₄ · 7H₂O and (Fe,Mg)SO₄ · 7H₂O crystals show small positive deviations from the ideal mixed crystals. Limitations of the {Fe(II) + Fe(III)} model due to data insufficiencies are discussed.     

Hot band spectroscopy of CCO in the C–O stretching region: The (ν1 + 2ν3) − 2ν3 and (2ν1 + ν3) − (ν1 + ν3) bands

Two C–O stretching hot bands, (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), of the CCO radical in the ground electronic state were measured. These hot bands are red shifted by approximately 70 cm⁻¹ compared to the C–O stretching fundamental. CCO was produced in a discharge through a flowing mixture of carbon suboxide and helium. The spectra were recorded using a diode laser spectrometer. The band origins were determined to be 1904.32512(62) and 1902.69130(56) cm⁻¹ for (ν₁ + 2ν₃) − 2ν₃ and (2ν₁ + ν₃) − (ν₁ + ν₃), respectively. The measurements in this band together with previously reported frequencies in the C–C and C–O stretching regions were analysed to determine harmonic frequencies and anharmonicity constants.     

Isobaric specific heat capacity of {xCH3OH + (1 − x)H2O} with x = (1.0000, 0.7943, 0.4949, 0.2606, 0.1936, 0.1010, and 0.0496) at T = (280, 320, and 360) K in the pressure range from (0.1 to 15) MPa

Measurements of the isobaric specific heat capacities for {xCH₃OH + (1 − x)H₂O} with x = (1.0000, 0.7943, 0.4949, 0.2606, 0.1936, 0.1010, and 0.0496) were carried out by the calorimeter with the thermal relaxation method, which we have developed, at T = (280, 320, and 360) K in the pressure range from (0.1 to 15) MPa. The present c_p measurements for (methanol + water) show mole fraction dependence at constant temperature with the maximum, and the maximum shifts to greater values of mole fraction with increasing temperature. Pressure dependence of the present measurements is insignificant. Temperature dependence increases with increasing mole fraction.     

Speeds of sound in {(1 − x)CH4 + xN2} with x = (0.10001, 0.19999, and 0.5422) at temperatures between 170 K and 400 K and pressures up to 30 MPa

The speed of sound in {(1 − x)CH₄ + xN₂} has been measured with a spherical acoustic resonator. Two mixtures with x = (0.10001 and 0.19999) were studied along isotherms at temperatures between 220 K and 400 K with pressures up to 20 MPa; a few additional measurements at p = (25 and 30) MPa are also reported. A third mixture with x = 0.5422 was studied along pseudo-isochores at amount-of-substance densities between 0.2 mol · dm⁻³ and 5 mol · dm⁻³. Corrections for molecular vibrational relaxation are discussed in detail and relaxation times are reported. The overall uncertainty of the measured speeds of sound is estimated to be not worse than ±0.02%, except for those measurements in the mixture with x = 0.5422 that lie along the pseduo-isochore at the highest amount-of-substance density. The results have been compared with the predictions of several equations of state used for natural gas systems.     

Compressed liquid densities for the (n-heptane + n-decane) and (n-octane + n-decane) systems from T = (313 to 363) K

Densities (p, ρ, T, x₁) of two binary n-alkane systems are reported from T = (313 to 363) K in the compressed liquid phase up to 25 MPa over the whole range of composition. The binary mixtures {x₁n-heptane + (1 ? x₁)n-decane} and {x₁n-octane + (1 ? x₁)n-decane} were prepared at compositions of (x₁ = 0.0531, 0.2594, 0.5219, 0.777, 0.952), and (x₁ = 0.0616, 0.2801, 0.5314, 0.7736, 0.9623), respectively. A measuring system based on a vibrating tube densimeter, DMA HPM from Anton Paar with data acquisition system was developed in order to obtain experimental densities. Water and nitrogen were used as reference fluids to calibrate the densimeter. Experimental methodology was checked by comparing the n-heptane and n-decane densities against multi-parameter equations proposed in the literature. Differences between both sets of data show a maximum deviation of 0.07%. Excess molar volumes, isothermal compressibility and isobaric thermal expansivity were computed from experimental densities.     

Excess molar enthalpies of the ternary mixtures: (tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-octane) at the temperature 298.15 K

Microcalorimetric measurements of excess enthalpies at the temperature T = 298.15 K are reported for the two ternary mixtures {x₁(C₄H₈O or C₅H₁₀O) + x₂C₅H₁₂O + x₃C₈H₁₈}. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that good estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

(Solid + solute) phase equilibria in aqueous solution. XIII. Thermodynamic properties of hydrozincite and predominance diagrams for (Zn2 + + H2O + CO2)

The thermodynamic properties ofZn₅(OH)₆(CO₃)₂ , hydrozincite, have been determined by performing solubility and d.s.c. measurements. The solubility constant in aqueous NaClO₄media has been measured at temperatures ranging from 288.15 K to 338.15 K at constant ionic strength (I =  1.00 mol · kg ^− 1). Additionally, the dependence of the solubility constant on the ionic strength has been investigated up to I =  3.00 mol · kg ^− 1NaClO₄at T =  298.15 K. The standard molar heat capacity C_{p, m}^ofunction fromT =  318.15 K to T =  418.15 K, as well as the heat of decomposition of hydrozincite, have been obtained from d.s.c. measurements. All experimental results have been simultaneously evaluated by means of the optimization routine of ChemSage yielding an internally consistent set of thermodynamic data (T =  298.15 K): solubility constant log ^* K_{ps 0}⁰ =  (9.0  ±  0.1), standard molar Gibbs energy of formationΔ_fG_m^o {Zn₅(OH)₆(CO₃)₂ }  =  ( − 3164.6  ±  3.0)kJ · mol ^− 1, standard molar enthalpy of formation Δ_fH_m^o{Zn₅(OH)₆(CO₃)₂ }  =  ( − 3584  ±  15)kJ · mol ^− 1, standard molar entropy S_m^o{Zn₅(OH)₆(CO₃)₂ }  =  (436  ±  50)J · mol ^− 1· K ^− 1and C_p,m^o / (J · mol ^− 1· K ^− 1)  =  (119  ±  11)  +  (0.834  ±  0.033)T / K. A three-dimensional predominance diagram is introduced which allows a comprehensive thermodynamic interpretation of phase relations in(Zn^2 +  +  H₂O  +  CO₂) . The axes of this phase diagram correspond to the potential quantities: temperature, partial pressure of carbon dioxide and pH of the aqueous solution. Moreover, it is shown how the stoichiometric composition{n(CO₃) / n(Zn)} of the solid compoundsZnCO₃ and Zn₅(OH)₆(CO₃)₂can be checked by thermodynamically analysing the measured solubility data.     

Thermodynamic properties of (NaCl + KCl + LiCl + H2O) at T = 298.15 K: Water activities,osmotic and activity coefficients

The water activities of aqueous electrolyte mixture (NaCl + KCl + LiCl + H₂O) were experimentally determined at T = 298.15 K by the hygrometric method at total ionic-strength from 0.4 mol · kg⁻¹ to 6 mol · kg⁻¹ for different ionic-strength fractions y of NaCl with y = 1/3, 1/2, and 2/3. The data allow the deduction of new osmotic coefficients. The results obtained were correlated by Pitzer’s model and Dinane’s mixing rules ECA I and ECA II for calculations of the water activity in mixed aqueous electrolytes. A new Dinane–Pitzer model is proposed for the calculation of osmotic coefficients in quaternary aqueous mixtures using the newly ternary and quaternary ionic mixing parameters of this studied system. The solute activity coefficients of component in the mixture are also determined for different ionic-strength fractions y of NaCl.     

Phase equilibrium data and thermodynamic modeling of the system (CO2 + biodiesel + methanol) at high pressures

The main objective of this work was to investigate the high pressure phase behavior of the binary systems {CO₂(1) + methanol(2)} and {CO₂(1) + soybean methyl esters (biodiesel)(2)} and the ternary system {CO₂(1) + biodiesel(2) + methanol(3)} were determined. Biodiesel was produced from soybean oil, purified, characterized and used in this work. The static synthetic method, using a variable-volume view cell, was employed to obtain the experimental data in the temperature range of (303.15 to 343.15) K and pressures up to 21 MPa. The mole fractions of carbon dioxide were varied according to the systems as follows: (0.2383 to 0.8666) for the binary system {CO₂(1) + methanol(2)}; (0.4201 to 0.9931) for the binary system {CO₂(1) + biodiesel(2)}; (0.4864 to 0.9767) for the ternary system {CO₂(1) + biodiesel(2) + methanol(3)} with a biodiesel to methanol molar ratio of (1:3); and (0.3732 to 0.9630) for the system {CO₂ + biodiesel + methanol} with a biodiesel to methanol molar ratio of (8:1). For these systems, (vapor + liquid), (liquid + liquid), (vapor + liquid + liquid) transitions were observed. The phase equilibrium data obtained for the systems were modeled using the Peng–Robinson equation of state with the classical van der Waals (PR-vdW2) and Wong-Sandler (PR–WS) mixing rules. Both thermodynamic models were able to satisfactorily correlate the phase behavior of the systems investigated and the PR–WS presented the best performance.     

Calorimetric investigation of mixing enthalpy of liquid (Co + Cu + Zr) alloys at T = 1873 K

The enthalpies of mixing of liquid (Co + Cu + Zr) alloys have been determined using the high-temperature isoperibolic calorimeter. The measurements have been performed along three sections (x_Co/x_Cu = 3/1, 1/1, 1/3) with x_Zr = 0 to 0.55 at T = 1873 K. Over the investigated composition range, the partial mixing enthalpies of zirconium are negative. The limiting partial enthalpies of mixing of undercooled liquid zirconium in liquid (Co + Cu) alloys are (−138 ± 18) kJ · mol⁻¹ (the section x_Co/x_Cu = 3/1), (−155 ± 10) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/1), and (−130 ± 22) kJ · mol⁻¹ (the section x_Co/x_Cu = 1/3). The integral mixing enthalpies are sign-changing. The isenthalpic curves have been plotted on the Gibbs triangle. The main features of the composition dependence of the integral mixing enthalpy of liquid ternary alloys are defined by the pair (Co + Zr) and (Cu + Zr) interactions.     

Modeling of the quaternary NaCl + KCl + CH3OH + H2O mixed electrolyte system: Binary and ternary mixing (ion + ion) and (ion + nonelectrolyte) interaction parameters

The purpose of this work is modeling of the quaternary system of mixed NaCl + KCl electrolyte in mixed CH₃OH + H₂O solvent, with different alcohol mass fractions by using particularly, the Pitzer (P) and Pitzer–Esteso (PE) equations and based on potentiometric measurement technique. The experimental data are obtained by different molal salt ratio r (r = m_NaCl/m_KCl = 100, 150, 200 and 250) in mixed solvent with different alcohol mass fractions x (x = 0.10, 0.20, 0.30, 0.40, and 0.50) in water. A galvanic cell is employed for collecting the potentiometric data by combining a Na⁺ glass membrane and Ag/AgCl electrodes and using different series of electrolyte solutions, at defined constant ionic strengths, with the molality ranging from 0.0005 up to 3.5 mol · kg⁻¹, at T = 298.15 ± 0.05 K of experiments. Comparison of the models shows that the modified Pitzer equation by Esteso (PE) present a better fit of the experimental data.     

(Liquid + liquid) equilibria for ternary mixtures of (alkane + benzene + [EMpy] [ESO4]) at several temperatures and atmospheric pressure

In this work, the separation of benzene from aliphatic hydrocarbons (hexane, or heptane) is investigated by extraction with 1-ethyl-3-methylpyridinium ethylsulphate ionic liquid, [EMpy][ESO₄]. (Liquid + liquid) equilibria (LLE) data are determined for the ternary systems: {hexane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15, 293.15, 298.15, and 303.15) K and {heptane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. The selectivity and distribution coefficient, derived from the tie line data, were used to determine whether the ionic liquid is a good solvent for the extraction of aromatic from aliphatic compounds. The consistency of the tie line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL equation. A study of the temperature effect and the influence of the chain length of the alkanes were realized. The results obtained were compared with other ionic liquids. There are no literature data for the mixtures discussed in this paper.