Fabrication of dual Z-scheme photocatalyst via coupling of BiOBr/Ag/AgCl heterojunction with P and S co-doped g-C3N4 for efficient phenol degradation

Advances in noble metal mediated Z-scheme photocatalytic system have ushered in a climax on environmental remediation. Herein, graphitic carbon nitride (GCN) and phosphorus sulphur co-doped graphitic carbon nitride (PSCN) were synthesized via calcination process. GCN, PSCN and Z-scheme visible light driven (VLD) ternary BiOBr/PSCN/Ag/AgCl nanophotocatalyst were characterized by X-ray diffraction pattern (XRD), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV–visible diffuse reflectance spectra (UV–vis DRS). BiOBr/PSCN/Ag/AgCl nanocomposite exhibited superior visible light driven photocatalytic ability as compared to pristine PSCN, AgCl and BiOBr towards degradation of phenol. The results explicated promising photocatalytic activity along with space separation of photocarriers caused via formation of BiOBr/PSCN/Ag/AgCl Z-scheme heterojunction. The visible light absorption efficacy of BiOBr/PSCN/Ag/AgCl photocatalyst was confirmed by photoluminescence (PL) spectra. Finally, recycling experiments were explored for the mechanistic detailing of phenol photodegradation employing BiOBr/PSCN/Ag/AgCl photocatalyst. After seven successive cycles photodegradation efficacy of photocatalyst was reduced to 90% from 98%. Proposed mechanism of BiOBr/PSCN/Ag/AgCl nanophotocatalyst for degradation of phenol was discussed. OH and O₂⁻ radicals were main reactive species responsible for photocatalytic phenol degradation.     

Heterojunction of BiPO4/BiOBr photocatalysts for Rhodamine B dye degradation under visible LED light irradiation

BiOBr synthesized by alcoholysis precipitation is used in the preparation of BiPO₄/BiOBr composites by adding H₃PO₄. Pristine BiOBr and a series of BiPO₄/BiOBr composites have been successfully synthesized using an entirely room-temperature production process. X-ray powder diffraction, scanning electron microscopy, High-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV–vis absorption spectroscopy were used to investigated the bulk structure, surface morphology, element composition and optical properties of the samples. The degradation effect of different proportions of BiPO₄/BiOBr composites, BiOBr and BiPO₄ on Rhodamine B (RhB) was evaluated under visible LED light irradiation. Compared to pure BiOBr and BiPO₄, the as-synthesized BiPO₄/BiOBr composites showed enhanced performance, with 30% BiPO₄/BiOBr composite showing the best performance, as it could degrade 95.66% of RhB (100 ml, 15 mg/L) within 120 min. The enhanced photocatalytic activity of BiPO₄/BiOBr was attributed to the heterojunction formation between BiOBr and BiPO₄ and efficient charge separation.     

ZnO修饰提升花状BiOBr的可见光催化降解罗丹明B性能

以Bi(NO₃)₃·5H₂O、Zn(CH₃COO)₂·2H₂O和NaBr为前驱体,采用简单溶剂热法制备BiOBr/ZnO三维花状微纳米复合材料。采用X射线衍射、扫描电子显微镜、X射线光子能谱、N₂吸附-脱附、光致发光和电子顺磁共振等分析技术对其理化性质进行了表征。通过可见光催化降解罗丹明B(RhB)的实验测试了复合材料的光催化性能。结果表明ZnO含量为5%的BiOBr/ZnO光催化活性最优,RhB降解率在50 min后达到98.3%,其降解速率常数是纯ZnO和BiOBr的6.3倍和3.4倍,并且具有较高的稳定性。复合材料光催化性能增强的可能原因为ZnO的引入增强了可见光的吸收和光生载流子的电荷分离效率。     

Synthesis of ZnTiO3/tourmaline/Ni foam catalyst and enhanced photocatalytic performance

ZnTiO₃/tourmaline loaded on the nickel foam (ZnTiO₃/tourmaline/Ni-foam) is prepared by a facile coating method. Morphology and structure of the photocatalyst were characterized by X-ray diffraction (XRD), scanning electrons microscopy (SEM), raman spectroscopy, UV–vis diffuse reflectance spectrum (UV–vis DRS) and photoluminescence spectroscopy (PL). The photocatalytic properties of the materials were tested by using the Rhodamine B (RhB) solution as the target pollutant. The results indicates that the ZnTiO₃/tourmaline/Ni foam exhibited higher photocatalytic activity than that of ZnTiO₃ and ZnTiO₃/Ni foam under ultraviolet (UV) light irradiation, and its degradation rate was up to 99.2%. Moreover, the degradation rate remained at 91.3% after eight consecutive photocatalytic reaction cycles. The outstanding photocatalytic performances of ZnTiO₃/tourmaline/Ni foam was mainly attributed to the existence of tourmaline, which can help to inhibit the recombination of electron-hole paris, and the proper pore structure of the carrier. Meanwhile, the trapping experiments indicated that ·O₂^– was the main active species in the photocatalytic degradation of RhB.     

Magnetic retrievable Ag/AgBr/ZnFe2O4 photocatalyst for efficient removal of organic pollutant under visible light

In the present work, a visible-light-driven Ag/AgBr/ZnFe₂O₄ photocatalyst has been successfully synthesized via a deposition–precipitation and photoreduction method. The crystal structure, chemical composition, morphology and optical properties of the as-prepared nanocomposites were characterized by X-ray diffraction spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscope, UV–vis diffuse reflectance spectroscopy and photoluminescence. The photocatalytic activities of the Ag/AgBr/ZnFe₂O₄ nanocomposites were evaluated through the photodegradation of gaseous toluene and methyl orange (MO) under visible light. The results revealed that the as-prepared Ag/AgBr/ZnFe₂O₄ nanocomposite exhibited excellent photocatalytic activity. The degrading efficiency of MO could still reach 90% after four cycles, and the Ag/AgBr/ZnFe₂O₄ nanocomposite could be recycled easily by a magnet. Additionally, the enhanced photocatalytic mechanism was discussed according to the trapping experiments, which indicated that the photo-generated holes (h⁺) and •O₂⁻ played important roles in photodegradation process. At last, a possible photocatalytic oxidation pathways of toluene was proposed based on the results of GC–MS. The Ag/AgBr/ZnFe₂O₄ composites showed potential application for efficient removal of organic pollutant.     

Preparation and measurement of properties of BiOBr/BiOCl/PANI ternary nanocomposite for highly efficient visible light photocatalytic applications

In this paper, we report the synthesis of the BiOBr/BiOCl/PANI ternary nanocomposite using a simple co-precipitation method. The modified photocatalyst produced was characterized by the FT-IR, FE-SEM equipped with EDS (as a Map), TEM, XRD, PL, Raman, and UV–Vis DRS analytical techniques. The synergetic effect of PANI and surface defects in nanoplates can prolong the recombination rate of photo-generated charge carriers. Thus, photocatalytic and photoelectrochemical activities of samples have been studied. Then, the methyl orange (MO) degradation performance of PANI/BiOBr and BiOBr/BiOCl/PANI was investigated under visible light irradiation. The lamp used to simulate sunlight in this photocatalytic study process was power down white light (5-W LED), less reported. The results got exhibited that the as-prepared BiOBr/BiOCl/PANI (90:10, Bi:PANI) nanocomposite showed a higher photocatalytic efficiency. Based on the scavenger tests, ^·O₂^? played a significant role in the degradation of MO. The connection between BiOBr, BiOCl, and PANI improved photocatalytic activity, which enhanced migration rate of the photo-generated electrons besides limiting the recombination of photo-generated electron–hole pairs.

     

Preparation,characterization and photocatalytic properties of BiOBr/ZnO composites

BiOBr/ZnO composite photocatalysts were prepared by a simple hydrothermal method. The as-prepared samples were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM), high-resolution transmission electron microscopy(HRTEM), UV–Vis diffusion reflectance spectroscopy(DRS) and photoluminescence(PL) spectroscopy, respectively. The photocatalytic activities were evaluated by the degradation of methyl blue(MB) under the simulated sunlight irradiation. Among all the samples, the BiOBr/ZnO composite with a mole ratio of 3:1(Bi:Zn) exhibited the best photocatalytic activity. The improvement of photocatalytic activity was mainly attributed to the low recombination ratio of photo-induced electron-hole pairs. The possible photocatalytic mechanism was discussed on the basis of the band structures of BiOBr and ZnO.     

Facile one-pot hydrothermal synthesis of B/N-codoped TiO2 hollow spheres with enhanced visible-light photocatalytic activity and photoelectrochemical property

B/N-codoped TiO₂ hollow spheres (B/N-THs) were synthesized by facile one-pot hydrothermal method. The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), N₂ adsorption-desorption isotherms, UV–vis diffuse reflectance spectrum (DRS) and X-ray photoelectron spectroscopy (XPS). The B/N-THs have large surface areas (up to 172.1 m² g⁻¹). The photocatalytic activities of as-prepared THs were evaluated by degradation of Reactive Brilliant Red dye X-3B solution under visible light irradiation. The results showed that B/N-THs exhibited the highest photocatalytic activity due to their high surface area and synergetic effect of B/N-codoped. A photocurrent–time spectrum was examined by anodic photocurrent response to characterize the electron-transferring efficiency in the process of photocatalysis reaction.     

Synthesis and photocatalytic properties of sunlight-responsive BiOBr–CoWO4 heterostructured nanocomposites

Efficient sunlight-responsive BiOBr–CoWO₄ heterostructured nanocomposite photocatalysts were prepared via a chemical precipitation route at 100°C in 4 hours. The prepared BiOBr–CoWO₄ heterostructures were characterized for phase identification, chemical composition, surface morphology, optical properties and surface area using various techniques. The X-ray diffraction pattern of the BiOBr–CoWO₄ nanocomposite was composed of diffraction peaks equivalent to both the tetragonal phase of BiOBr and the monoclinic phase of CoWO₄ nanoparticles. X-ray photoelectron spectral study of the BiOBr–CoWO₄ nanocomposite revealed orbitals of both BiOBr and CoWO₄ compounds. Transmission electron microscopy images revealed that spherical particles of CoWO₄ (20–25 nm) were dispersed on the surface of BiOBr. UV–visible–near-infrared spectral study of the BiOBr–CoWO₄ nanocomposite showed good visible-light absorption. Among the manufactured materials, BiOBr–CoWO₄-2 nanocomposite showed better charge carrier separation efficiency, as demonstrated by photoluminescence and time-resolved fluorescence. To study the practical utility of the prepared materials, their photocatalytic capability was examined for the degradation of rhodamine B (RhB) aqueous solution under sunlight irradiation. The photodegradation results showed that BiOBr–CoWO₄-2 nanocomposite degraded 98.69% RhB solution and the degradation constant was 0.067 min⁻¹, which was 5.6 and 22.5 times larger than that of pure BiOBr and CoWO₄ nanoparticles, respectively, after 60 minutes of sunlight irradiation. The superior photoactivity was facilitated by electron–hole pair separation and transfer driven by the heterostructure interface between BiOBr particles and CoWO₄ nanoparticles. The removal of RhB was initiated by photogenerated h⁺, O₂^{• −} and ^•OH reactive species based on the scavenger effect.     

Fe2O3/ZnO/ZnFe2O4 composites for the efficient photocatalytic degradation of organic dyes under visible light

In this study, novel ternary Fe₂O₃/ZnO/ZnFe₂O₄ (ZFO) composites were successfully prepared through a simple hydrothermal reaction with subsequent thermal treatment. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) analysis, Barrett-Joyner-Halenda (BJH) measurement, and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation indicated that the ZFO composites calcined at 500 °C has the best photocatalytic activity (the photocatalytic degradation efficiency can reach up to 95.7% within 60 min) and can maintain a stable photocatalytic degradation efficiency for at least three cycles. In addition, the photocatalytic activity of ZFO composites toward dye decomposition follows the order cationic Rh B > anionic methyl orange. Finally, using different scavengers, superoxide and hydroxyl radicals were identified as the primary active species during the degradation reaction of Rh B.     

Preparation of high‐activity AgBr/Ag3PO4 photocatalyst based on hexadecyltrimethylammonium bromide and mechanism of photocatalytic enhancement

A high‐activity AgBr/Ag₃PO₄ heterojunction photocatalyst was synthesized based on hexadecyltrimethylammonium bromide. Its microspheres were characterized using X‐ray diffractometry, transmission electron microscopy and ultraviolet–visible diffuse reflectance spectroscopy. The new photocatalyst with high photocatalytic activity exceptionally outperforms pure Ag₃PO₄ and AgBr in methyl orange degradation. The enhancement of photocatalytic activity is attributed to the efficient separation of electron–hole pairs. In this photocatalytic reaction, h⁺ and ^?O^2? are the main reactive species that induce visible‐light‐driven degradation.     

Enhanced photocatalytic activity and stability of AgBr/BiOBr/graphene heterojunction for phenol degradation under visible light

In this work, we have reported synthesis of AgBr/BiOBr photocatalyst supported on graphene (Gr) using facile precipitation method. AgBr/BiOBr/Gr was characterized using various spectral techniques like FESEM, TEM, XRD, FTIR, XPS, Raman and PL analyses. AgBr/BiOBr/Gr had improved visible light absorption. PL studies indicated the reduction in recombination of photogenerated electron hole pair of AGBr/BiOBr/Gr. AFM analysis confirmed the thickness of AGBr/BiOBr/Gr was less than 8.0 nm. The higher dispersibility of photocatalyst was ascertained by Tyndall effect. AgBr/BiOBr/Gr photocatalyst was effectively used for the photodegradation of phenol from simulated water. The phenol degradation process was remarkably influenced by adsorption process. The concurrent adsorption and photocatalytic was effective for degradation of phenol. The phenol was completely mineralized into CO₂ and H₂O in 6 h. The degradation process followed pseudo first order kinetics. The results confirmed that integration of AgBr/BiOBr with graphene caused an increase in photocatalytic activity due to reduced recombination of photogenerated electron hole pair and electron sink behavior of graphene for photogenerated electrons of BiOBr. AgBr/BiOBr/Gr photocatalyst displayed significant stability and recyclability for ten catalytic cycles.     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄ S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-VisDRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B (RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄ S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe³⁺的加入促进了光生电荷的分离和H₂O₂的活化,超氧阴离子自由基(·O₂^-)、空穴和羟基是光-自芬顿催化过程中的主要活性物种,且·O₂^-作用更大。     

g-C_3N_4/BiOBr异质结光催化剂的制备与可见光催化活性

以三聚氰胺作为合成g-C_3N_4纳米片的前躯体,以Bi(NO3)3·5H2O和KBr作为合成BiOBr的原料,采用水热法构建g-C_3N_4/Bi OBr二维异质结可见光催化剂,有效的晶面复合和合适的能带组合有助于增强g-C_3N_4和BiOBr的可见光催化活性。利用X射线衍射(XRD)、透射电镜(TEM)、X射线光电子能谱(XPS)、光致发光光谱(PL)和紫外-可见漫反射光谱(UVvis DRS)等方法表征其结构、光学性质以及组成结构。在可见光(λ420 nm)下以光催化降解RhB来评价合成催化剂的光催化活性,结果表明,g-C_3N_4/BiOBr光催化降解罗丹明B(Rh B)的效率高于单体g-C_3N_4和BiOBr,并对g-C_3N_4/BiOBr增强可见光催化RhB机理进行解释。     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B(RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe...     

ZnO/BiOI微球的合成及其光催化性能

通过一步溶剂热法合成ZnO/BiOI纳米复合材料,在Bi（NO₃）₃·6H₂O、KI、ZnO和乙二醇（EG）溶剂中,制备出的样品尺寸和形貌采用X射线粉末衍射（XRD）、场发射扫描电镜（FESEM）、高分辨透射电镜（HRTEM）、紫外-可见漫反射光谱（DRS）、X射线光电子能谱（XPS）、N₂吸附-脱附等,对实验所得产物的组成、结构及光学性质等进行表征。以染料罗丹明B（RhB）水溶液和气态乙醛作为降解对象,采用BiOI、ZnO/BiOI和ZnO微纳材料作为光催化剂,通过对BiOI、ZnO/BiOI和ZnO微纳材料在可见光下光催化降解染料罗丹明B（RhB）水溶液和气态乙醛,结果表明多孔微纳材料的ZnO/BiOI具有更高的降解效率,实验表明多孔微纳材料的ZnO/BiOI具有更高的氧空位浓度,因此使其催化活性增强,讨论了其可能的催化活性机理。     

ZnO/BiOI微球的合成及其光催化性能

通过一步溶剂热法合成ZnO/BiOI纳米复合材料,在Bi（NO₃）₃·6H₂O、KI、ZnO和乙二醇（EG）溶剂中,制备出的样品尺寸和形貌采用X射线粉末衍射（XRD）、场发射扫描电镜（FESEM）、高分辨透射电镜（HRTEM）、紫外-可见漫反射光谱（DRS）、X射线光电子能谱（XPS）、N₂吸附-脱附等,对实验所得产物的组成、结构及光学性质等进行表征。以染料罗丹明B（RhB）水溶液和气态乙醛作为降解对象,采用BiOI、ZnO/BiOI和ZnO微纳材料作为光催化剂,通过对BiOI、ZnO/BiOI和ZnO微纳材料在可见光下光催化降解染料罗丹明B（RhB）水溶液和气态乙醛,结果表明多孔微纳材料的ZnO/BiOI具有更高的降解效率,实验表明多孔微纳材料的ZnO/BiOI具有更高的氧空位浓度,因此使其催化活性增强,讨论了其可能的催化活性机理。     

油水自组装制备Ag@AgBr/BiOBr高效可见光催化剂

采用油水自组装法制备Ag@AgBr表面修饰三维花状结构BiOBr复合光催化剂(Ag@AgBr/BiOBr),利用XRD、SEM、TEM、EDX、DRS、XPS、PL及EIS等手段对光催化剂的结构和性能进行了表征,并研究了可见光下降解亚甲基蓝(MB)的催化性能.研究表明:Ag@AgBr粒径约为20nm,均匀分散在花状微球BiOBr表面上;贵金属Ag的表面等离子体效应可显著增强可见光利用率,并有效促进光生电子空穴对的分离,Ag@AgBr(15wt%)/BiOBr光催化剂展现出最优的催化活性,可见光照射30min对MB的降解率将近90%,淬灭实验表明·O₂^-,h⁺和Br⁰均为活性物种.结合理论分析与实验结果提出复合光催化剂的降解机理.     

油水自组装制备Ag@AgBr/BiOBr高效可见光催化剂

采用油水自组装法制备Ag@Ag Br表面修饰三维花状结构Bi OBr复合光催化剂(Ag@Ag Br/Bi OBr),利用XRD、SEM、TEM、EDX、DRS、XPS、PL及EIS等手段对光催化剂的结构和性能进行了表征,并研究了可见光下降解亚甲基蓝(MB)的催化性能。研究表明:Ag@Ag Br粒径约为20 nm,均匀分散在花状微球Bi OBr表面上;贵金属Ag的表面等离子体效应可显著增强可见光利用率,并有效促进光生电子空穴对的分离,Ag@Ag Br(15wt%)/Bi OBr光催化剂展现出最优的催化活性,可见光照射30 min对MB的降解率将近90%,淬灭实验表明·O2-,h+和Br0均为活性物种。结合理论分析与实验结果提出复合光催化剂的降解机理。     

Bi/BiVO4&Bi4V2O11复合催化剂的制备及其光催化性能

经由溶剂热反应、光辅助还原过程制备Bi/Bi VO_4Bi_4V_2O_(11)纳米复合光催化材料。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高分辨率透射电子显微镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射光谱(UV-Vis DRS)、N_2吸附-脱附等温线和光致发光(PL)等手段对该复合物进行表征。实验结果表明当金属Bi与BiVO_4Bi_4V_2O_(11)的质量比值为0.8,可见光照射30 min时,Bi/BiVO_4Bi_4V_2O_(11)复合催化剂对罗丹明B(RhB)的降解率可达95.6%。此外,Bi/BiVO_4Bi_4V_2O_(11)对四环素(TC)的降解也表现出增强的光催化性能。Bi/BiVO_4Bi_4V_2O_(11)复合材料提升的光催化性能可能归因于金属Bi的表面等离子体共振(SPR)效应、拓宽的可见光吸收范围和增大的比表面积。此外,提出了复合光催化剂可能的光催化机理。