Synthesis of stable C-phosphonate analogues of Neisseria meningitidis group A capsular polysaccharide structures using modified Mitsunobu reaction conditions

Examples of synthetic C-phosphonate analogues of microbial polysaccharide structures containing inter-residue phosphodiester linkages are most rare. The successful construction of such analogues of the Neisseria meningitidis Group A capsular polysaccharide is described. Using a modified Mitsunobu reaction (tris(4-chlorophenyl)phosphine, DIAD, excess of Et3N) between an anomeric C-phosphonate monoester and a 6-OH ManNAc acceptor a high yield (88%) of a dimer was obtained. Transformation of the dimer into a new 6-OH acceptor through deacetylation and further reaction with the elongating C-phosphonate monomer employing the same conditions afforded the trimer in 92% yield. Iteration of the procedure then afforded the tetramer with a coupling yield of 85%. The di-, tri- and tetramer were deprotected to give target structures ready for conjugation to a carrier protein and subsequent immunological evaluation.     

Synthesis, photophysical, electrochemical, and electrogenerated chemiluminescence studies. Multiple sequential electron transfers in BODIPY monomers, dimers, trimers, and polymer

Synthesis of the C(8) BODIPY monomers, dimers, and trimers, a C(8) polymer, and N(8) aza-BODIPY monomer and dimer was carried out. Methyl and mesityl C(8)-substituted monomers, dimers, and trimers were used. Dimers, trimers, and polymer were formed chemically through the β-β (2/6) positions by oxidative coupling using FeCl(3). A red shift of the absorbance and fluorescence is observed with addition of monomer units from monomer to polymer for C(8) dyes. The aza-BODIPY dye shows red-shifted absorbance and fluorescence compared with the C(8) analogue. Cyclic voltammetry shows one, two, and three one-electron waves on both reduction and oxidation for the monomer, dimer, and trimer, respectively, for the C(8) BODIPYs. The separation for the reduction peaks for the C(8) dimers is 0.12 V compared with 0.22 V for the oxidation, while the trimers show separations of 0.09 V between reduction peaks and 0.13 V for oxidation peaks. The larger separations between the second and third peaks, 0.25 V for the oxidation and 0.2 V for the reduction, are consistent with a larger energy to remove or add a third electron compared with the second one. The BODIPY polymer shows the presence of many sequential one-electron waves with a small separation. These results provide evidence for significant electronic interactions between different monomer units. The aza-BODIPY dye shows a reduction peak 0.8 V more positive compared to the C(8) compound. Aza-BODIPY dimer shows the appearance of four waves in dichloromethane. The separation between two consecutive waves is around 0.12 V for reduction compared with 0.2 V for oxidation, which is comparable with the results for the C(8) dyes. Electrogenerated chemiluminescence (ECL) of the different species was obtained, including weak ECL of the polymer.     

Characterization of anomeric differences of ammonium-bound monomeric and dimeric complex ions of 1α- and 1β-azido-pentofuranosyl derivates by kinetic method

Relative stabilities (ΔG^c) of ammonium-bound monomers and dimers of anomeric β- -pentofuranosyl 1α- and 1β-azide derivates are determinate using the kinetic method by measuring relative rates of competitive collision-induced dissociations of dimeric [ANH₄B]⁺ and trimeric [A₂NH₄B]⁺ or [ANH₄B₂]⁺ cluster ions. Comparison between calculated ammonium affinities (AAs) and relative stabilities (ΔG^c) of ammonium-bound monomers shows qualitative correlations between both thermochemical quantities, but in two examples the activation barrier differences of competitive fragmentation channels cause a large disparity between both thermochemical data. Therefore, the most stable ammonium-bound monomers of the anomeric lα- and lβ-2,3,5-tri-O-benzyl-β- -arabino-pento-furanosyl azides possess the lowest ammonium affinities and the highest relative stabilities. Two different relative stabilities measured for the same ammonium-bound homo- or hetero-dimers indicate dissimilar activated barriers of trimers transition states for dimer formations. The activated barriers of trimers depend on the relative stabilities of ammonium-bound monomer within the trimeric cluster ions.     

IR spectra of photopolymerized C60 films. Experimental and density functional theory study

IR spectra of photopolymerized fullerene films obtained by simultaneous deposition and UV irradiation were measured in the range of 1500-450 cm(-1). The degree of the polymerization of the C60 films was estimated to be about 95%. To assist the assignment of the experimental IR spectra of the films, quantum chemical calculations of the equilibrium structures of the C60 dimers and trimers were performed at the DFT(B3LYP)/3-21G level of theory. Next, IR frequencies and intensities for those structures were calculated. For the five-trimer structures found in the calculations, the relative stabilities were determined at the B3LYP/4-31G and B3LYP/6-31G levels and used to select the lowest-energy trimers, which are Trimer A (angle between monomer centers is 90 degrees ) and Trimer B (angle between monomer centers is 120 degrees). Next, the IR spectra of the polymerized fullerene films were compared with the calculated frequencies of the lowest-energy dimer and the two lowest-energy trimers. On the basis of this analysis and on the comparison of the film spectra with the IR spectra of the C60 dimer and trimer spectra obtained by other methods, it was shown that the main components of the films are C60 dimers and the orthorhombic (O) polymer phase. The tetragonal (T) and rhombohedral (R) polymers, as well as small amounts of monomers, were also found. Although vibrational frequencies of different C60 phases are similar in most cases, we found several unique spectral features of the C60 dimer and other polymers that may be used to determine the composition of the polymerized C60 film.     

Comparisons of phosphorothioate with phosphate transfer reactions for a monoester,diester, and triester: isotope effect studies

Phosphorothioate esters are sometimes used as surrogates for phosphate ester substrates in studies of enzymatic phosphoryl transfer reactions. To gain better understanding of the comparative inherent chemistry of the two types of esters, we have measured equilibrium and kinetic isotope effects for several phosphorothioate esters of p-nitrophenol (pNPPT) and compared the results with data from phosphate esters. The primary (18)O isotope effect at the phenolic group ((18)k(bridge)), the secondary nitrogen-15 isotope effect ((15)k) in the nitro group, and (for the monoester and diester) the secondary oxygen-18 isotope effect ((18)k(nonbridge)) in the phosphoryl oxygens were measured. The equilibrium isotope effect (EIE) (18)k(nonbridge) for the deprotonation of the monoanion of pNPPT is 1.015 +/- 0.002, very similar to values previously reported for phosphate monoesters. The EIEs for complexation of Zn(2+) and Cd(2+) with the dianion pNPPT(2-) were both unity. The mechanism of the aqueous hydrolysis of the monoanion and dianion of pNPPT, the diester ethyl pNPPT, and the triester dimethyl pNPPT was probed using heavy atom kinetic isotope effects. The results were compared with the data reported for analogous phosphate monoester, diester, and triester reactions. The results suggest that leaving group bond fission in the transition state of reactions of the monoester pNPPT is more advanced than for its phosphate counterpart pNPP, while alkaline hydrolysis of the phosphorothioate diester and triester exhibits somewhat less advanced bond fission than that of their phosphate ester counterparts.     

Oligomeric liquid crystals: From monomers to trimers

A homologous series of linear liquid crystal trimers, the 4,4′-bis[ω-(4-methoxyazobenzene-4′-yloxy)alkoxy]azobenzenes, has been synthesized and characterized. The transitional properties of the trimers are compared with those of the corresponding series of dimers, the α,ω-bis(4-methoxyazobenzene-4′-oxy)alkanes, and monomers, the 4-methoxy-4′-alkoxyazobenzenes. Characteristically pronounced odd-even effects were seen for the transitional properties of both dimers and trimers on varying the spacer lengths. The clearing temperatures of the trimers were higher than those of the corresponding dimers, but as the length of the flexible spacers was increased this difference became rather small. The ratios of T _NI, and ΔS _NI/R for monomer:dimer and dimer:trimer are discussed. These are very similar to reported values for similar materials, suggesting that there may be a rather general relationship between the transitional properties of liquid crystal oligomers as the number of mesogenic units is increased.     

Some consequences of high temperature water vapor spectroscopy: water dimer at equilibrium

It is shown that the evolution of water vapor spectra in the 2500-5000 cm(-1) range recorded at 650 K and pressures up to 130 atms after subtraction of monomer contribution may be interpreted qualitatively well on the basis of experimental data on water dimer and trimer obtained from cold molecular beams and in He droplets. The proposed spectroscopic model considers water vapor as a mixture of nonideal monomers, dimers, and trimers at chemical equilibrium. The effect of line mixing is taken into account in the monomer spectrum modeling. Decomposition of the high temperature spectra allowed determining a dimer equilibrium constant that was compared with the previously known values. The contribution of water trimer is assessed. The performed analysis indicates that the number of bound dimers in water vapor is quite large, even at such a high temperature.     

Probing the mechanism of sulfoxide-catalyzed hemiacetal activation in dehydrative glycosylation

The concept of sulfoxide-covalent catalysis has been established in the context of a versatile hemiacetal hydroxyl activation/substitution reaction for the formation of anomeric linkages. Mechanistic studies focused on the hemiacetal activation process show that this transformation proceeds in the presence of a sulfonic anhydride and an acid scavenger through the intermediacy of a glycosyl sulfonate species (10), which serves as a resting state prior to the addition of an external nucleophile and subsequent glycosidic bond formation. Successful determination of the proportion of (18)O incorporation in 10 as a function of its formation, via the technique of dynamic monitoring of (13)C-(16/18)O isotopic chemical shift perturbations, provides strong evidence that hemiacetal activation proceeds through initial nucleophilic addition of the hemiacetal hydroxyl to the S(IV)-center of putative sulfonium sulfonate 6. Further confirmation was obtained through the independent synthesis, structure verification, and (1)H NMR detection of glycosyl oxosulfonium 11 during the sulfoxide-catalyzed conversion of hemiacetal 3 to glycosyl sulfonate 10.     

Role of back-biting for generation of hybrid dimers and trimers on flash pyrolysis of poly(styrene-co-methacrylonitrile)

The role of the back-biting reaction for generation of dimers and trimers on flash pyrolysis of poly(styrene-co-methacrylonitrile) by pyrolysis gas chromatography with the use of a Curie-point pyrolyzer has been investigated. Yields of each monomer, dimer, and trimer changed depending on the sequence distribution as well as on copolymer composition and pyrolysis temperature. The degradation behavior was explained by the competition between the back-biting reaction and depolymerization. It was found that the hybrid dimers and trimers were produced mainly by the back-biting reaction, which was followed by β-scission, and hence yields of hybrid dimers and trimers correctly reflect the sequence distribution of the copolymer of styrene and methacrylonitrile without interference from the second reaction of monomers regenerated in the flash pyrolysis. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2747–2753, 1999     

Infrared spectra of ethylene clusters: (C2D4)2 and (C2D4)3

Spectra of ethylene dimers and trimers are studied in the ν(11) fundamental band region of C(2)D(4) (≈2200 cm(-1)) using a tuneable quantum cascade laser to probe a pulsed supersonic slit jet expansion. The dimer spectrum is that of a prolate symmetric top perpendicular band, with a distinctive appearance because the A rotational constant is almost exactly equal to six times the B constant. The analysis supports the previously determined cross-shaped dimer structure with D(2d) symmetry. An ethylene trimer has not previously been observed with rotational resolution. The spectrum is that of an oblate symmetric top parallel band. It leads to a proposed trimer structure which is barrel shaped and has C(3h) or C(3) symmetry, with the ethylene monomer C-C axes approximately aligned along the trimer symmetry axis.     

Investigation of tightly coupled porphyrin arrays comprised of identical monomers for multibit information storage

Our prior designs for molecular-based information storage devices have employed multiple redox-active units organized in weakly coupled, covalently linked arrays. To explore a simpler design, we report here the synthesis of porphyrin arrays where porphyrins with identical oxidation potentials are directly linked to one another instead of joined via a molecular linker. Oxidative coupling with AgPF(6) of zinc(II)-5,15-bis(4-tert-butylphenyl)-10-phenylporphyrin, obtained by a rational synthesis, afforded the expected dimer joined by a meso-meso linkage and an unexpected trimer joined by meso-meso linkages. For attachment to an electroactive surface we synthesized a meso-linked porphyrin dimer with a thiol-linker in one of the meso positions. The S-acetyl protecting group was used to avoid handling free thiol groups. Coupling of zinc(II)-5,10,15-tris(3, 5-di-tert-butylphenyl)porphyrin ("upper half") and zinc(II)-5-[4-(S-acetylthio)phenyl]-10,20-bis(3, 5-di-tert-butylphenyl)porphyrin ("lower half") afforded three different meso-linked dimers with the desired dimer as the main product. Electrochemical examination of the meso-linked dimer in solution shows that the first two oxidation potentials of the array differ by approximately 0.15 V and straddle the value exhibited by the monomeric constituents. The third and fourth oxidation potentials of the array are also split although to a lesser extent ( approximately 0.08 V) than the first and second. For the meso-linked trimer, the first three oxidation waves are also split; however, these waves are severely overlapped. The electrochemical behavior of the dimers and trimer is indicative of strong electronic interactions among the porphyrins. The thiol-derivatized meso-linked dimers form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetylthio protecting group. The porphyrin SAM exhibits four well-resolved oxidation waves. Regardless, the meso-meso linkage is relatively unstable upon formation of the pi-cation radical(s). This characteristic indicates that the structural motif is of limited utility for molecular information storage elements.     

Characterization of 2-methylglyceric acid oligomers in secondary organic aerosol formed from the photooxidation of isoprene using trimethylsilylation and gas chromatography/ion trap mass spectrometry

In the present work, we have characterized in detail the chemical structures of secondary organic aerosol (SOA) components that were generated in a smog chamber and result from the photooxidation of isoprene under high-NO(x) conditions typical for a polluted atmosphere. Isoprene high-NO(x) SOA contains 2-methylglyceric acid (2-MG) and oligoester derivatives thereof. Trimethylsilylation, in combination with capillary gas chromatography (GC)/ion trap mass spectrometry (MS) and detailed interpretation of the MS data, allowed structural characterization the polar oxygenated compounds present in isoprene SOA up to 2-MG trimers. GC separation was achieved between 2-MG linear and branched dimers or trimers, as well as between the 2-MG linear dimer and isomeric mono-acetate derivatives thereof. The electron ionization (EI) spectra of the trimethylsilyl derivatives contain a wealth of structural information, including information about the molecular weight (MW), oligoester linkages, terminal carboxylic and hydroxymethyl groups, and esterification sites. Only part of this information can be achieved with a soft ionization technique such as electrospray (ESI) in combination with collision-induced dissociation (CID). The methane chemical ionization (CI) data were used to obtain supporting MW information. Interesting EI spectral differences were observed between the trimethylsilyl derivatives of 2-MG linear and branched dimers or trimers and between 2-MG linear dimer mono-acetate isomers.     

Mannosazide methyl uronate donors. Glycosylating properties and use in the construction of β-ManNAcA-containing oligosaccharides

Mannosazide methyl uronate donors equipped with a variety of anomeric leaving groups (β- and α-S-phenyl, β- and α-N-phenyltrifluoroacetimidates, hydroxyl, β-sulfoxide, and (R(s))- and (S(s))-α-sulfoxides) were subjected to activating conditions, and the results were monitored by (1)H NMR. While the S-phenyl and imidate donors all gave a conformational mixture of anomeric α-triflates, the hemiacetal and β- and α-sulfoxides produced an oxosulfonium triflate and β- and α-sulfonium bistriflates, respectively. The β-S-phenyl mannosazide methyl uronate performed best in both activation experiments and glycosylation studies and provided the 1,2-cis mannosidic linkage with excellent selectivity. Consequently, an α-Glc-(1→4)-β-ManN(3)A-SPh disaccharide, constructed by the stereoselective glycosylation of a 6-O-Fmoc-protected glucoside and β-S-phenyl mannosazide methyl uronate, was used as the repetitive donor building block in the synthesis of tri-, penta-, and heptasaccharide fragments corresponding to the Micrococcus luteus teichuronic acid.     

Landing of size-selected Agn+ clusters on single crystal TiO2 (110)-(1x1) surfaces at room temperature

Mass-selected Ag(n) (+) (n=1,2,3) clusters with impact energy less than 2 eV per atom were deposited from the gas phase onto rutile titania (110)-(1x1) single crystal surfaces at room temperature and imaged using ultra-high vacuum scanning tunneling microscopy. Upon reaching the surface, Ag monomers sintered to form three-dimensional islands of approximately 50 atoms in size, with an average measured height of 7.5 A and diameter of 42 A. This suggests that the monomers are highly mobile on the titania surface at room temperature. Dimers also sintered to form large clusters upon deposition, approximately 30 atoms in size, with an average height of 6.2 A and diameter of 33 A. Clusters formed from monomer deposition appeared approximately three times more frequently at step edges than clusters formed from dimer deposition, indicating that the surface mobility of deposited monomers is higher than that of deposited dimers. In sharp contrast to the deposition of monomers and dimers, the deposition of trimers resulted in a high density of very small clusters on the order of a few atoms in size, indicative of intact trimers on the surface, implying that deposited trimers have very limited mobility on the surface at room temperature.     

1D 13C-NMR data as molecular descriptors in spectra--structure relationship analysis of oligosaccharides

Spectra-structure relationships were investigated for estimating the anomeric configuration, residues and type of linkages of linear and branched trisaccharides using 13C-NMR chemical shifts. For this study, 119 pyranosyl trisaccharides were used that are trimers of the α or β anomers of D-glucose, D-galactose, D-mannose, L-fucose or L-rhamnose residues bonded through a or b glycosidic linkages of types 1→2, 1→3, 1→4, or 1→6, as well as methoxylated and/or N-acetylated amino trisaccharides. Machine learning experiments were performed for: (1) classification of the anomeric configuration of the first unit, second unit and reducing end; (2) classification of the type of first and second linkages; (3) classification of the three residues: reducing end, middle and first residue; and (4) classification of the chain type. Our previously model for predicting the structure of disaccharides was incorporated in this new model with an improvement of the predictive power. The best results were achieved using Random Forests with 204 di- and trisaccharides for the training set-it could correctly classify 83%, 90%, 88%, 85%, 85%, 75%, 79%, 68% and 94% of the test set (69 compounds) for the nine tasks, respectively, on the basis of unassigned chemical shifts.     

The solution structures and dynamics and the solid-state structures of substituted cyclopentadienyltitanium(IV) trifluorides

Organotitanium fluorides (C5Me4R)TiF3 (R = H, Me, Et) sublimate with formation of crystalline dimers. From solution, we obtained crystals of dimers and tetramers. The tetramer [{(C5Me5)TiF3}4] irreversibly dissociates in the solid state to dimers (DeltaH = 8.33 kcal mol(-1)). The variable-temperature (1)H and (19)F NMR spectroscopy measurements of the toluene-d(8) solution of [{(C5Me5)TiF3}2] revealed at 202 K one monomeric, two dimeric (with C2h and Cs symmetry), two tetrameric (with D2 and C2v symmetry), and two trimeric (both C2 symmetry) molecules. With the increase in temperature and dilution of the solution, the composition of the solution shifts to the smaller molecules. The thermodynamic and activation parameters for the reversible dissociation of dimers to monomers in the solution are DeltaH = 9.2 kcal mol(-1), DeltaS = 24.2 cal mol(-1) K(-1), DeltaH(double dagger) = 12.2 kcal mol(-1), DeltaS(double dagger) = 9.7 cal mol(-1) K(-1). The dissociation path with a weakly double-bridged transition-state dimer was proposed. The thermodynamic parameters for the reversible dissociation of the C2v tetramer to the dimers in solution are DeltaH = 7.9 kcal mol(-1) and DeltaS = 26.8 cal mol(-1) K(-1). From both tetramers, the D2 molecule is 0.34(5) kcal mol(-1) lower in enthalpy and 6.5(5) cal mol(-1) K(-1) lower in entropy than the C2v molecule. The structures of both trimers were proposed. The low-temperature 19F NMR spectra of the CDCl3 solution of [{(C5Me5)TiF3}2] are consistent with equilibria of a monomer, two dimers (with C2h and Cs symmetry), and a trimer. The vapor pressure osmometric molecular mass determination of CDCl3 solution of [{(C5Me5)TiF3}2] at 302 K is consistent with the equilibrium of the dimer and the monomer.     

Theoretical Study on Intermolecular Interactions and Thermodynamic Properties of Dimethylnitroamine Clusters

Ab initio SCF and Mφller-Plesset correlation correction methods in combination with counterpose procedure for BSSE correction have been applied to the theroetical studying of dimethylnitroamine and its dimers and trimers.Three optimized stable dimers and two trimers have been obtained.The corrected binding energies of the most stable dimer and trimer were predicted to be -24.68kJ/mol and -47.27kJ/mol,respectively at the MP2/6-31G^*//HF/6-31G^* level.The proportion of correlated interation energies to their total interaction energies for all clusters was at least 29.3 percent,and the BSSE of ΔE(MP2) was at least 10.0kJ/mol.Dispersion and/or electrostatic force were dominant in all clusters.There exist cooperative effects in both the chain and the cyclic trimers.The vibrational frequencies associated with N-O stretches or wags exhibit slight red shifts,but the modes associated with the motion of hydrogen atoms of the methyl group show somewhat blue shifts with respect to those of monomer.Thermodynamic properties of dimethylnitroamine and its clusters at different temperatures have been calculated on the basis of vibrational analyses.The changes of the Gibbs free energies for the aggregation from monomer to the most stable dimer and trimer were predicted to be 14.37kJ/mol and 30.40kJ/mol,respectively,at 1 atm and 298.15K.     

Lipase-catalyzed ring-opening polymerization of molecularly pure cyclic oligomers for use in synthesis and chemical recycling of aliphatic polyesters

The lipase-catalyzed ROP of molecularly pure cyclic oligomers with a definite degree of oligomerization is analyzed with respect to the molecular weights of the resulting polymers and certain kinetic parameters of the enzymatic reaction. Cyclic BA dimers, trimers, and tetramers polymerize faster than the equivalent monomer; however, the latter produces PBA of significantly higher molecular weight. The reason is that the ring opening of the cyclic monomer is slow, leading to a lower initiator concentration than that produced by the cyclic BA dimer and trimer. Similarly, the cyclic BS dimer produces PBS of higher molecular weight than that obtained from the cyclic BS trimer.     

Microwave assisted "click" chemistry for the synthesis of multiple labeled-carbohydrate oligonucleotides on solid support

A versatile approach has been developed for the multiple labeling of oligonucleotides. First, three linkers as a H-phosphonate monoester derivative were condensed on a solid-supported T12 to introduce H-phosphonate diester linkages which were oxidized in the presence of propargylamine. Second, three galactosyl azide derivatives were conjugated to the solid-supported three-alkyne-modified T12 by a 1,3-cycloaddition so-called "click chemistry" in the presence of Cu(I) assisted by microwaves.     

Altered mechanisms of reactions of phosphate esters bridging a dinuclear metal center

Kinetic isotope effects in the nucleophile and leaving group were obtained for the reaction of p-nitrophenyl phosphate monoester coordinated to a dinuclear Co(III) complex. The metal complex of the p-nitrophenyl phosphate monoester was found to hydrolyze by a single-step concerted mechanism, with significant nucleophilic participation in the transition state. By contrast, the hydrolysis of uncomplexed p-nitrophenyl phosphate occurs by a very loose transition state with little bond formation to the nucleophile. Previously, the metal complex of the diester methyl-p-nitrophenyl phosphate was found to hydrolyze via a two-step addition-elimination mechanism, in contrast to the concerted hydrolysis mechanism followed by uncomplexed diesters with the p-nitrophenolate leaving group. These results show that coordination to a metal complex can significantly alter the mechanism of phosphoryl transfer.