Adsorption of arsenic (V) from a water solution onto a surfactant-modified zeolite

In this study a surfactant-modified zeolite (SMZ) was prepared by adsorbing the cationic surfactant hexadecyltrimethylammonium (HDTMA) bromide on a clinoptilolite. The adsorption of the surfactant modified the surface properties of the clinoptilolite and enhanced the anionic capacity of the SMZ. The adsorption equilibrium data of As(V) from the water solution on the SMZ were obtained in a batch adsorber, and the Langmuir isotherm matched the data reasonably well. The As(V) adsorption capacity of the SMZ was 12.5 times greater than that of the clinoptilolite. The adsorption of As(V) on SMZ was mainly due to the interactions between the anionic sites of the SMZ and the As(V) anions in water solution. The adsorption capacity of the SMZ was dependent on the solution pH. The adsorption capacity was increased and decreased by augmenting the pH from 5 to 7 and from 7 to 12, respectively. This unusual behavior was due to the fact that the affinity of the As(V) for the SMZ was dependent on the As(V) species that were present in solution. The adsorption capacity of the SMZ was slightly favored by decreasing the temperature from 25 to 15 °C. The heat of adsorption was estimated to be ΔH _ads=−46.82 KJ/mol, indicating that the adsorption was exothermic and the As(V) was chemisorbed on the SMZ.     

Viscosities for Ionic Liquid Binary Mixtures with a Common Ion

At present, there is a considerable amount of work devoted to the study of the thermophysical properties of pure ionic liquids, which contrasts with the few data available for their mixtures. One of the most appealing characteristics of ionic liquids is the capability of subtly changing the chemical structure of the cation and anion in order to design appropriate solvents for specific applications. Mixtures of ionic liquids increase enormously this specificity, due to the unlimited combinations that arise from mixing two or more ionic liquids. In this context, the study of the thermophysical properties of these mixtures is revealed as a fundamental task. In this work the viscosities of the ionic liquid binary mixtures with a common ion ([C₆mim] + [C₂mim])[BF₄], ([C₆mim] + [C₄mim])[BF₄], [C₄mim]([BF₄] + [MeSO₄]) and [C₄mim]([PF₆] + [BF₄]) were determined within the temperature range (298.15–308.15) K. The temperature dependence of the viscosity for pure liquids is analyzed by means of the Vogel-Tammann-Fulcher equation and several mixing rules are applied for the mixtures.     

Dynamics of monolayer films formed on a substrate of square symmetry

The paper discusses the ground state properties and dynamics of monolayer films formed by atomic adsorbates on a square lattice, being the (100) plane of a face centered cubic crystal. The vibrations of films ordered into the commensurate c(2×2) as well as into the recently discovered ordered phase exhibiting a distorted Archimedean tiling of the type (3².4.3.4) are considered. The dispersion relations and the densities of states are determined and discussed.     

Gas adsorption process in activated carbon over a wide temperature range above the critical point. Part 1: modified Dubinin-Astakhov model

Simulations of the thermal effects during adsorption cycles are valuable tools for the design of efficient adsorption-based systems such as gas storage, gas separation and adsorption-based heat pumps. An analytical representation of the measured adsorption data over the wide operating pressure and temperature swing of the system is necessary for the calculation of complete mass and energy conservation equations. In Part 1, the Dubinin-Astakhov (D-A) model is adapted to model hydrogen, nitrogen, and methane adsorption isotherms on activated carbon at high pressures and supercritical temperatures assuming a constant microporous adsorption volume. The five parameter D-A type adsorption model is shown to fit the experimental data for hydrogen (30 to 293 K, up to 6 MPa), nitrogen (93 to 298 K, up to 6 MPa), and for methane (243 to 333 K, up to 9 MPa). The quality of the fit of the multiple experimental adsorption isotherms is excellent over the large temperature and pressure ranges involved. The model’s parameters could be determined as well from only the 77 K and 298 K hydrogen isotherms without much reducing the quality of the fit.     

The characterisation and evaluation of activated carbon in a cigarette filter

Cigarette smoke is an ever changing and extremely complex mixture of over 5000 chemicals. When the cigarette burns, thousands of chemical substances are generated, and these are distributed between the gas phase and the particles which constitute the smoke aerosol. Activated carbon when used in a filter can selectively remove a number of the vapour phase compounds to varying degrees of efficiency. Carbons of different activities (50–60% CTC and 90–100% CTC) have been characterised using nitrogen adsorption and also the sorption of a number of different vapours with different properties, using a dynamic gravimetric adsorption technique. Surface areas, pore volumes, diffusivities and heats of adsorption were calculated using nitrogen, benzene, heptane, ethyl acetate and water as the probe molecules. Smoke chemistries were measured using a screening approach on the characterised carbons as filter additives. It was seen that the higher activity carbon results in increased retention in the majority of the measured vapour phase smoke constituents.     

Volumetric Study of Aqueous Solutions of Polyethylene Glycol as a Function of the Polymer Molar Mass in the Temperature Range 283.15 to 313.15 K and 0.1 MPa

Density measurements were made for binary aqueous solutions of polyethylene glycol at seven temperatures: 283.15, 288.15, 293.15, 298.15, 303.15, 308.15, and 313.15 K. Polyethylene glycol samples with nominal average molar masses of 3000 g⋅mol⁻¹ (PEG 3000), 6000 g⋅mol⁻¹ (PEG 6000), 10000 g⋅mol⁻¹ (PEG 10000) and 20000 g⋅mol⁻¹ (PEG 20000) were used. These results were used to determine the specific volumes of solutions with solute-to-solvent mass ratios (mass of the solute/mass of the solvent) in the range 0.0546 to 1.4932 for PEG 3000, from 0.0553 to 1.4986 for PEG 6000, from 0.0552 to 1.2241 for PEG 10000, and from 0.0530 to 1.2264 for PEG 20000. The differences between the specific volume of a solution and the specific volume of the pure solvent, at a given temperature, were represented by a virial-type equation in terms of solute concentration. The first-order coefficient of the expansion is the partial specific volume of the solute at infinite dilution. The higher-order coefficients are related to the contribution of pairs, triplets, and higher-order solute aggregates, according to the Constant-Pressure Solution Theory. The functional dependence of the virial coefficients upon temperature is discussed in terms of solute-solute and solute-solvent interactions. The effect of the PEG molar mass on the partial specific volume of solute at infinite dilution, as well as the contributions of pairs of solute molecules to the solution volume, are also investigated. The apparent specific volume, apparent specific expansibility, apparent specific expansibility at infinite dilution and virial coefficients of the apparent specific expansibility are also presented.     

Self-assembly snapshots of a 2 × 2 copper(I) grid

Self-assembled 2 × 2 grids have been characterised as high-fidelity species produced when the correct stoichiometric ratios are met, but rarely are the individual steps leading to and from their formation characterised. Here, we present such a study using equilibrium-restricted factor analysis to model a set of UV–vis spectra starting from a bis-bidentate ligand to the assembly of a 2 × 2 grid complex upon titration with 1 equiv. of [Cu(MeCN)₄](PF₆) and to disassembly upon further titration. Intermediate species [CuL₂]⁺, [Cu₂L₃]²⁺, [Cu₃L₂]³⁺ and [Cu₂L]²⁺ are evidenced along the assembly and disassembly pathways. Complementary ¹H NMR titrations are consistent with the rich set of complexes and equilibria involved. Given the nature of the assembly process, the assembly is entropy driven and likely enthalpy driven as well. The disassembly process is both enthalpy and entropy driven according to the standard free energy values derived from the modelling of the spectrophotometric titration data.     

Gas adsorption process in activated carbon over a wide temperature range above the critical point. Part 2: conservation of mass and energy

Simulations of the thermal effects during adsorption cycles are a valuable tool for the design of efficient adsorption-based systems such as gas storage, gas separation and adsorption-based heat pumps. In this paper, we present simulations of the thermal phenomena associated with hydrogen, nitrogen and methane adsorption on activated carbon for supercritical temperatures and high pressures. The analytical expressions of adsorption and of the internal energy of the adsorbed phase are calculated from a Dubinin-Astakhov adsorption model using solution thermodynamics. A constant adsorption volume is assumed. The isosteric heat is also calculated and discussed. Finally, the mass and energy rate balance equations for an adsorbate/adsorbent pair are presented and are shown to be in agreement with desorption experiments.     

A paper-based competitive lateral flow immunoassay for multi β-agonist residues by using a single monoclonal antibody labelled with red fluorescent nanoparticles

An ultrasensitive paper based lateral flow assay is described for rapid and simultaneous fluorometric detection of several β-agonists including clenbuterol and its chemical analogues (mabuterol, brombuterol, cimaterol, cimbuterol, bromchlorbuterol and banbuterol). A nonspecific monoclonal antibody (mAb) against clenbuterol and its analogues was prepared and employed in a competitive immunoassay where mAb conjugated to fluorescent nanoparticles and free β-agonists compete for the binding sites. This enables rapid screening for the 7 β-agonists in a single run that takes about 8 min. Detection limits for the seven β-agonists are <50 pg g^?1 of pork. Recoveries ranged from 69.5% to 102.4%, and relative standard deviations were ±15%. The assay was applied to the analysis of both using spiked and unspiked pork for β-agonists, and the results compare well to those obtained by HPLC-MS.

Open image in new window

Graphical abstract Schematic presentation of an ultra sensitive fluorescent nanoparticle based paper based assay for rapid detection of multi β-agonists in pork tissue.

     

Gramicidin A interaction at a dioleoyl phosphatidylcholine monolayer on a mercury drop electrode

A biosensor where the sensing surface is a fluid dioleyl phosphatidylcholine monolayer (DOPC) deposited on a mercury drop was used. The lipid monolayer was held in 0.1 M NaCl and a concentration of gramicidin A in the range 0-12 nM was used. Electrochemical impedance spectroscopy in the frequency range 0.1-65 kHz was employed to investigate how the defect-free monolayer responds to interactions of gramicidin A in solution.The data was analyzed both with multivariate data analysis and classical electrochemical methods. The principal component analysis of the resulting impedance spectra gave a linear dependence on the concentration of gramicidin A. An increasing permittivity was observed in the low-frequency regime with increasing concentration of gramicidin A in solution.     

Enhanced removal of hydrogen sulfide from a gas stream by 3-aminopropyltriethoxysilane-surface-functionalized activated carbon

A commercial activated carbon was functionally modified by silylation with 3-aminopropyltriethoxysilane (APTES). The silylation led to the fixation of weakly basic functional groups, –NH₂, on the surface as indicated by pH titration, Boehm titration, N $_{2^{-}}$ BET analysis and X-ray photoelectron spectroscopic (XPS) analysis. Despite reducing the specific BET area and the pore volume, silylation improved the H₂S removal capacity so that APTES modified activated carbon (APTES-AC) was 3.55 times more effective than the original activated carbon. XPS results indicate that H₂S removal may be associated with the amino (–NH₂) group and the presence of sulfur in the four oxidation states S^2?, S⁰, S⁴⁺ and S⁶⁺. The effects of moisture, oxygen content and temperature on the performance of APTES-AC for H₂S removal were investigated. The presence of moisture in the gas stream was found to have an adverse effect on the H₂S removal, whilst the presence of oxygen favored the removal of H₂S by APTES-AC. The higher removal capacity of APTES-AC relative to the original activated carbon indicates that APTES-AC is a potential candidate for the removal of H₂S from gas streams. The H₂S removal efficiency of APTES-AC was proved be superior to that of Na₂CO₃-impregnated AC by the pilot-scale test of purification H₂S containing industrial waste gas, yellow phosphorus off-gas.     

Rheologic Properties of a Water-Soluble Terpolymer with Vinyl Biphenyl

A water-soluble acrylamide-modified terpolymer (PAAP) with sodium 2-acrylamido-2-methylpropane sulfonate and vinyl biphenyl as the hydrophobic monomer was synthesized to obtain a polymeric thickening agent applied in middle- and low-permeability oil reservoirs. The polymer is expected to possess a low molecular weight and high solution viscosity. The steady-state consecutive shear cycles of PAAP in aqueous and brine solutions were measured, and the viscoelastic properties of PAAP solutions were investigated as a function of polymer, NaCl and sodium dodecylbenzene sulfonate (SDBS) concentrations. The aqueous PAAP solutions exhibits pseudoplastic and thixotropic behavior over the range of shear rate and shear thickening behavior at very low shear rate. The steady-state shear results show that some disrupted associating aggregates at high shear rate can be reformed during the shear reversion process and the suitable shear rate is favorable to the formation of hydrophobically associative structures in the brine solutions. Above 0.05 g⋅dL⁻¹ PAAP, aqueous PAAP solutions have predominantly elastic character over the range of angular frequency that is strengthened with increasing polymer concentration. The PAAP brine solutions exhibit predominantly elastic behavior only above 3 rad⋅s⁻¹ and a salt-thickening effect. By addition of an optimum amount of SDBS (0.5–0.8 mmol⋅L⁻¹), the complex viscosities become much higher than the dynamic viscosities, although the loss tangent values increase owing to the formation of loose associative structures.     

Coordination Features of a Polyaza-Bipyridine-Macrocyclic Ligand toward Co(II) and Cd(II) in Water and Dimethylsulfoxide

The coordination features of a polyaza macrocycle, containing the diverse bipyridine unit 4,4′-(2,5,6,11,14-pentaaza[15]-[15](2,2′)-bipyridylophane (L3), with Co(II) and Cd(II) have been studied in aqueous solution and in the aprotic solvent dimethylsulfoxide (DMSO). The study was carried out at 298 K by means of potentiometric, spectrophotometric and calorimetric techniques. The formation of the dinuclear species M₂ L3 is observed for Co(II) both in water and in DMSO, whereas Cd(II) is able to form this type of dinuclear complex only in DMSO. The FT-IR spectra of the mononuclear species ML3, formed in both solvents, provide evidence that the rigid structure of the polyaminic chain prevents metal ions from being coordinated by all of the nitrogens of the macrocyclic cavity, in good agreement with the behavior suggested by the thermodynamic parameters. The results are compared with those for the complexation of Co(II) and Cd(II) with similar polyazamacrocycles containing a bipyridine unit directly inside the cavity. Semi-empirical calculations were also performed to obtain structural information.     

Volumetric Properties of Aqueous Solutions of L-Glutamic Acid and Magnesium-L-Glutamate

Densities of aqueous solutions of L-glutamic acid and magnesium-L-glutamate were determined from T=288.15 to 333.15 K at 5 K temperature intervals. The measured densities were used to evaluate the apparent molar volumes, V _2,φ (m,T), the cubic expansion coefficients, α(m,T), and the changes of isobaric heat capacities with respect to pressure, (∂ C _p /∂ p) _T,m . They were qualitatively correlated with changes in the structure of water that occur when L-glutamic acid or magnesium-L-glutamate are present.     

Estimates of Internal Pressure and Molar Refraction of Imidazolium Based Ionic Liquids as a Function of Temperature

Estimates of the internal pressure (∂ U/∂ V) _T of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆], and 1-methyl-3-octylimidazolium tetrafluoroborate [OMIM][BF₄] were made from experimentally determined densities and speeds of sound in the temperature range 283.15 to 343.15 K. Values (∂ U/∂ V) _T for all the ILs studied are higher than those of water and molecular organic liquids. We also measured the refractive indices n _D in the temperature range 288.15 to 343.15 K and estimated the molar refraction R _M. Refractive indices of ILs were also higher than those of normal organic liquids but were comparable to those of long hydrocarbon chain organic solvents.     

Effects of a non-ionic surfactant,Tween 20, on adsorption/desorption of saccharification enzymes onto/from lignocelluloses and saccharification rate

In this work, we examined the role of a non-ionic surfactant, Tween 20, on enzymatic hydrolysis of lignocelluloses. Delignified lignocelluloses (pine wood chip) were used as model substrates. Effects of Tween 20 on adsorption/desorption onto/from lignocelluloses with and without hydrolysis were evaluated respectively. Tween 20 lowered the non-biospecific adsorption of β-glucosidase and enhanced the bio-specific adsorption of cellulase. Tween 20 did not affect the liquid phase reaction (cellobiose hydrolysis). However, for the solid surface reaction (cellulose hydrolysis), cellulose conversion for 72 hrs was increased 9–21% and 1–8.5% for samples with high lignin contents (PI) and low lignin contents (PIII) by injection of Tween 20 (0.024–0.24 mM), respectively. Moreover, Tween 20 increased the cellulose conversion rate substantially. It is suggested that the increase of cellulase amount adsorbed due to the increase of effective cellulose surface by Tween 20 contribute to the enhancement of cellulose conversion.     

Adsorption of CO2 as a method for the characterisation of the structure of alumina-pillared clay catalysts

The aim of this work was to study the effect of the metal loading on the structure of two series of cobalt and manganese pillared clay-supported catalysts. For this purpose, equilibrium data for CO₂ adsorption at 273 K were analysed using Freundlich, Langmuir and Toth isotherm models, in order to estimate the adsorption parameters and to relate them with the metal loading of the catalysts. The metal distributions on the porous structure of the catalysts were studied using the temperature programmed reduction results combined with information from the nitrogen physisorption data. Comparison of all results reveals that up to a certain metal loading, about 0.5 wt% of Co and 2 wt% of Mn, the metal oxide is well dispersed into the porous structure of the pillared clay. At higher metal loadings, bulk-metal oxide particles are formed on the external surface.     

Molecularly imprinted adsorbents for preconcentration and isolation of progesterone and testosterone by solid phase extraction combined with HPLC

The use of a novel procedure of solid-phase extraction with molecularly imprinted polymers (MISPE) has been described. A MISPE procedure relying on tailor-made, artificial-mimic materials capable of selectively rebinding target analytes (steroids) based on a combination of recognition mechanisms, such as size, shape and functionality, was custom designed for progesterone and testosterone. The combination of MISPE with LC/DAD is a simple and an efficient method for the determination and quality control of progesterone and testosterone in human urine samples.     

Intramolecular Charge Transfer Reaction in Solutions of Low to High Electrolyte Concentrations: Interplay between Friction and Solvation

Fluorescence emission spectroscopy have been used to investigate the effects of electrolytes on the excited state intramolecular charge transfer (ICT) reaction in 4-(1-azetidinyl)benzonitrile (P4C) in very dilute to concentrated electrolyte solutions of ethyl acetate (EA), acetonitrile (AN) and ethanol (EtOH). In the limit of very low electrolyte concentrations, the reaction rate (=1/τ _rxn, τ _rxn being the reaction time) is found to decrease with increasing electrolyte concentration, the extent of decrease being the maximum in EA and the minimum in AN. At moderate to higher electrolyte concentrations, however, the rate increases upon further addition of electrolyte. The observed non-monotonic electrolyte concentration dependence of rate is believed to occur due to a novel interplay between friction and solvation experienced by the photo-excited reactant in solution. Moreover, the long time decay constant and amplitude of the bi-exponential decay of the time resolved fluorescence emission intensity also show a significant electrolyte concentration dependence which corroborates the relevant steady-state results. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

The safety assessment of herbals with a new and ethical approach

The increasing use of plant medicines (herbals) in Europe needs a shared methodology to determine the toxicity and the daily exposure level to these drugs. For this reason, the European regulatory agencies have undertaken a study that could meet popular uses and toxicological research in different countries of the Union. Here we list some examples of the most used herbal drug classes and we propose a decision-making process based on their characteristics, their content in active principles and on the basis of the present scientific pharmacological and toxicological literature. The proposed decision tree actually makes easier for the assessor to quickly and accurately evaluate the accredited indexes for risk and toxicity assessment based on the preclinical literature data and using the correct classification that some of them may have because they are already present in medicinal products or used as food.