The effect of annealing temperatures on surface properties,hydroxyapatite growth and cell behaviors of TiO2 nanotubes

Well‐ordered TiO₂ nanotubes were prepared by the electrochemical anodization of titanium in an ethylene glycol electrolyte containing 1 wt% NH₄F and 10 wt% H₂O at 20 V for 20 min, followed by annealing. The surface morphology and crystal structure of the samples were examined as a function of the annealing temperature by field emission scanning electron microscopy (FE‐SEM) and X‐ray diffraction (XRD), respectively. Crystallization of the nanotubes to the anatase phase occurred at 450 °C, while rutile formation was observed at 600 °C. Disintegration of the nanotubes was observed at 600 °C and the structure vanished completely at 750 °C. Electrochemical corrosion studies showed that the annealed nanotubes exhibited higher corrosion resistance than the as‐formed nanotubes. The growth of hydroxyapatite on the different TiO₂ nanotubes was also investigated by soaking them in simulated body fluid (SBF). The results indicated that the tubes annealed to a mixture of anatase and rutile was clearly more efficient than that in their amorphous or plain anatase state. The in vitro cell response in terms of cell morphology and proliferation was evaluated using osteoblast cells. The highest cell activity was observed on the TiO₂ nanotubes annealed at 600 °C. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation and Characterization of Peroxo Titanic Acid Solution Using TiCl3

The peroxo titanic acid solution was successfully prepared using titanium trichloride as a precursor. The basic properties of the TiO₂ film prepared by the solution were investigated in view of phase change, bandgap energy, crystalline size etc. The film displayed amorphous TiO₂ at room temperature, anatase above 281°C and a mixture of anatase and rutile at 990°C. The crystalline size increases with annealing temperatures, while the bandgap energies decrease due to the quantum size effect and the formation of rutile phase which has low bandgap energy. As a result of TG-DTA, it was found that annealing treatment at 990°C for 2 h formed a mixture of anatase and rutile through three steps: (1) the removal of physically adsorbed water (2) the decomposition of peroxo group (3) amorphous-anatase or anatase-rutile phase transformation.     

Electronic Structure and Size of TiO2 Nanoparticles of Controlled Size Prepared by Aerosol Methods

Summary.  A complete characterization of nanostructures has to deal both with electronic structure and dimensions. Here we present the characterization of TiO₂ nanoparticles of controlled size prepared by aerosol methods. The electronic structure of these nanoparticles was probed by X-ray absorption spectroscopy (XAS), the particle size by atomic force microscopy (AFM). XAS spectra show that the particles crystallize in the anatase phase upon heating at 500°C, whereas further annealing at 700°C give crystallites of 70% anatase and 30% rutile phases. Raising the temperature to 900°C results in a complete transformation of the particles to rutile. AFM images reveal that the mean size of the anatase particles formed upon heating at 500°C is 30 nm, whereas for the rutile particles formed upon annealing at 900°C 90 nm were found. The results obtained by these techniques agree with XRD data. Received October 5, 2001. Accepted (revised) December 6, 2001     

The influence of titanium dioxide phase composition on dyes photocatalysis

A comparative study of TiO₂ powders prepared by sol–gel methods is presented. Titanium tetraisopropoxide was used as the precursor for the sol–gel processes. The effects of the annealing treatment on phase, crystallite size, porosity and photodegradation of dyes (methyl orange and methylene blue) were studied. The phase structure, microstructure and surface properties of the films were characterized by using X-ray diffraction (XRD) and Atomic Force Microscopy (AFM). The X-ray diffraction was used for crystal phase identification, for the accurate estimation of the anatase–rutile ratio and for the crystallite size evaluation of each polymorph in the samples. It was found that the only TiO₂ anatase phase of the synthesized TiO₂ develops below 500 °C, between 600 and 800 °C the anatase coexist with rutile and above 800 °C only the rutile phase was found in the samples. Attention has been paid not only to crystal structures, but also to the porosity, the particle size and the photocatalytic properties. However, the annealing temperature was found to have significant influence on the photocatalytic properties. Different TiO₂ doctor blade thin films were obtained mixing the sol gel powder (100% anatase) and TiO₂ Aldrich with TiO₂ Degussa P25. The surfactant (Triton X100 or sodium dodecyl sulfate) affects the packing density of the particles during deposition and the photocatalytic degradation efficiency of the dyes. The photocatalytic degradation kinetics of methyl orange and methylene blue using TiO₂ thin film were investigated.     

Effect of silicon dioxide on the formation of the phase composition and pore structure of titanium dioxide with the anatase structure

The formation of the structure of titanium dioxide modified with silicon dioxide, which was introduced as tetraethyl orthosilicate, was studied. It was found that the formation of the nanocrystalline structure of TiO₂ occurred upon the modification of titanium dioxide with silicon dioxide. This nanocrystalline structure of TiO₂ was formed by highly dispersed anatase particles of size 6–10 nm stabilized by silicon oxide layers, which were formed upon the decomposition of tetraethyl orthosilicate. An increase in the modifier concentration resulted in a deceleration of the growth of anatase particles and an increase in the temperature of the phase transition of anatase to rutile. It was found that the anatase phase in the samples containing 5–15 wt % SiO₂ was stable up to 1000°C. The stabilization of highly dispersed anatase particles facilitated the retention of the developed fine-pore structure of xerogels with a pore diameter of 4 nm up to 900°C.     

Effects of the grain boundary on phase structure and surface morphology of TiO2 films prepared by MAO technology

Some porous titanium dioxide (TiO₂) films were prepared on flexible substrates by the method of micro‐arc oxidation (MAO) combined with magnetron sputtering (MS). The original material of MAO was Ti films prepared by MS, which was composed of columnar crystals with a diameter of less than 150 nm. The results indicated that the phase of the oxide films was mainly anatase structure, and the pore diameter of the films was about 100–300 nm. However, the phases of the oxide films prepared on Ti plates, which composed of equiaxed crystals with a diameter of 2–5 µm, were anatase and rutile structure. The pore diameter of those films was about 4–10 µm. It was suggested that the changes of the grain boundary structure of the original material could have a significant impact on the phase structure and surface morphology of the resultant TiOx films. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation and characterization of terraced surfaces of low-index faces of anatase, rutile, and brookite

Simple polishing and relatively low temperature annealing procedures for preparing atomically flat terraced surfaces of various single-crystal TiO2 polymorphs are described. Anatase (101), anatase (001), rutile (100), rutile (110), and brookite (111) surfaces could all be prepared with a terraced surface structure as revealed in AFM images. The rutile (100) and (110) and anatase (101) surfaces were also shown to produce acceptable LEED patterns immediately upon insertion into a UHV system without the usual sputter and anneal cycles.     

Preparation of RGO/TiO2 photocatalyst and the mechanism of its hydrothermal process

To improve the catalytic efficiency of nanotitanium dioxide, this research investigated the phase transformation, crystal growth, and hydrogen production efficiency of nanotitanium dioxide at different temperatures and pressures. The RGO/TiO₂ photocatalyst was prepared by a hydrothermal method using graphene oxide and butyl titanate as raw materials. Different types of photocatalyst samples were prepared by adjusting the reaction temperature and time in the hydrothermal process. X‐ray diffraction and transmission electron microscope techniques were employed to investigate the nucleation and growth processes of rutile and anatase in the hydrothermal process from the perspectives of thermodynamics and kinetics. The evolution of the titanium dioxide structure with hydrothermal temperature and hydrothermal time was analyzed. Finally, photocatalytic decomposition of water data shows that the photocatalyst with the best hydrogen production effect was obtained by 12 hr of hydrothermal treatment at a hydrothermal temperature of 180°C. The total hydrogen production of this sample was 0.037 mmol/g under a xenon lamp for 3 hr.     

Thermal and hydrothermal stability of flame hydrolytically synthesized SiO2/TiO2 mixed oxides

The phase stability of the two TiO₂ modifications (anatase and rutile) in fumed SiO₂/TiO₂ nano-composites (0–24.8 wt-% silica) under thermal and hydrothermal conditions was investigated by X-ray powder diffraction, transmission electron microscopy (TEM) and gas adsorption methods (BET). The results show that the phase transformation from anatase to rutile type of structure and the growth of anatase crystallites are significantly retarded by mixing small amounts of SiO₂ into TiO₂, while the specific surface area is maintained. The SiO₂/TiO₂-composites reveal a remarkable shift in the anatase to rutile transformation temperature from approx. 500 °C (pure TiO₂) to approx. 1000 °C (samples with SiO₂ contents of more than 10%). The rate of phase transformation from anatase to rutile is enhanced under hydrothermal conditions compared to conventional thermal treatment, e.g. pure titania (AEROXIDE^® TiO₂ P25) annealed under hydrothermal conditions (100 g/m³ absolute humidity, 4 h at 600 °C) had a rutile content of 85%, while the same specimens annealed in absence of humidity contained only 46% rutile. However, the difference in rate of phase transformation became less pronounced when the silica content in SiO₂/TiO₂-composites was further increased.TEM results showed that the surface of the anatase crystallites was covered with silica. This averts coalescence of anatase crystallites and keeps them under a critical size during the annealing process. When the crystal domains grew larger, a rapid conversion to rutile took place. The critical size of anatase crystallites for the phase transformation was estimated to be 15–20 nm.     

Structure and photocatalytic properties of materials based on titanium dioxide and silver nanoparticles

Phase composition and structure of mesostructured materials, titanium dioxide and titanium dioxide modified with silver nanoparticles, have been studied by X-ray diffraction analysis. Introduction of Ag(I) ions into the initial composition and variation of the annealing temperature over the 500–950°C range allows controlling the anatase to rutile crystal phase ratio in the samples. The photocatalytic activity of TiO₂ and TiO₂/Ag samples has been demonstrated using the methyl orange degradation reaction. The catalytic properties of the materials have been found to depend on the anatase to rutile phase ratio and on the presence of silver nanoparticles.     

Li‐doped nanosized TiO2 powder with enhanced photocalatylic acivity under sunlight irradiation

This work reports on the synthesis of Li‐doped TiO₂ nanoparticles using the sol–gel process and solid‐state sintering, and investigates their potential use as a photocatalyst for degradation under sunlight excitation of different organic model compounds in aqueous solution. The structure of the nanocrystals was examined by X‐ray diffraction, UV‐vis ground state diffuse reflectance absorption spectra and X‐ray photoelectron emission spectroscopy. Results showed that samples prepared by sol–gel process and calcined at 400 °C are composed of a mixture of anatase and rutile phases, in contrast to the one prepared by solid‐state sintering, which exhibits an anatase phase with Li being involved in a spinel phase. The photocatalytic degradation of aqueous solutions of different aromatic compounds was successfully achieved under sunlight excitation in presence of Li‐doped TiO₂ prepared via sol–gel process. It was shown that the calcination temperature and the preparation mode greatly affect the photocatalytic efficiency. Copyright © 2010 John Wiley & Sons, Ltd.     

Graphene Nanosheets as a Platform for the 2D Ordering of Metal Oxide Nanoparticles: Mesoporous 2D Aggregate of Anatase TiO2 Nanoparticles with Improved Electrode Performance

Graphene nanosheets are successfully applied as an effective platform for the 2D ordering of metal oxide nanoparticles. Mesoporous 2D aggregates of anatase TiO₂ nanoparticles are synthesized by the heat treatment of the uniformly hybridized nanocomposite of layered titanate–reduced graphene oxide (RGO) at elevated temperatures. The precursor layered titanate–RGO nanocomposite is prepared by self‐assembly of anionic RGO nanosheets and cationic TiO₂ nanosols. The calcination of the as‐prepared layered titanate–RGO nanocomposite at 500 °C induces a structural and morphological change of layered titanate nanoplates into anatase TiO₂ nanoparticles without significant modification of the RGO nanosheet. Increasing the heating temperature to 600 °C gives rise to elimination of the RGO component, leading to the formation of sheetlike porous aggregates of RGO‐free TiO₂ nanoparticles. The nanocomposites calcined at 500–700 °C display promising functionality as negative electrodes for lithium ion batteries. Among the present calcined derivatives, the 2D sheet‐shaped aggregate of TiO₂ nanoparticles obtained from calcination at 600 °C delivers the greatest specific discharge capacity with good capacity retention for all current density conditions applied. Such superior electrode performance of the nanocomposite calcined at 600 °C is attributable both to the improved stability of the crystal structure and crystal morphology of titania and to the enhancement of Li⁺ ion transport through the enlargement of mesopores. The present findings clearly demonstrate the usefulness of RGO nanosheets as a platform for 2D‐ordered superstructures of metal oxide nanoparticles with improved electrode performance.     

Characterization of brookite and a new corundum-like titania phase synthesized under hydrothermal conditions

Brookite rich samples were synthesized under hydrothermal conditions by using TiCl₃ as precursor. They also contained a new titanium oxide phase that has the same crystalline structure as Ti₂O₃, and is stable after annealing in air. Samples were characterized with X-ray powder diffraction, transmission electron microscopy and thermogravimetry. Crystalline phases were refined by using the Rietveld method, from which phase concentrations and atomic bond lengths were obtained as a function of sample annealing temperature. Samples contained brookite, anatase, rutile and the new corundum-like phase: Brookite's concentration was larger than 50 wt%, while the one of the corundum-like phase reached 20(6) wt%. The local symmetry and the atomic bond lengths of these two phases depended on the crystallite size; for both, there is a correlation between the evolution of the atomic bond lengths with temperature and their transformation into another phase. The hydrothermal conditions stabilized brookite, anatase, and the corundum-like phase at high temperature: This last phase was stable in air, even at 900°C.     

Influence of sputter power on structural and electrical properties of TiO2 films for Al/TiO2/Si gate capacitors

Titanium dioxide (TiO₂) thin films were deposited onto p‐Si substrates held at room temperature by reactive Direct Current (DC) magnetron sputtering at various sputter powers in the range 80–200 W. The as‐deposited TiO₂ films were annealed at a temperature of 1023 K. The post‐annealed films were characterized for crystallographic structure, chemical binding configuration, surface morphology and optical absorption. The electrical and dielectric properties of Al/TiO₂/p‐Si structure were determined from the capacitance–voltage and current–voltage characteristics. X‐ray diffraction studies confirmed that the as‐deposited films were amorphous in nature. After post‐annealing at 1023 K, the films formed at lower powers exhibited anatase phase, where as those deposited at sputter powers > 160 W showed the mixed anatase and rutile phases of TiO₂. The surface morphology of the films varied significantly with the increase of sputter power. The electrical and dielectric properties on the air‐annealed Al/TiO₂/p‐Si structures were studied. The effect of sputter power on the electrical and dielectric characteristics of the structure of Al/TiO₂/p‐Si (metal‐insulator‐semiconductor) was systematically investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Photocatalytic Activity for Water Decomposition to Hydrogen over Nitrogen‐doped TiO2 Nanoparticle

Nitrogen-doped TiO2 nanoparticle photocatalysts were obtained by an annealing method with gaseous ammonia and nitrogen. The influence of dopant N on the crystal structure was characterized by XRD, XPS, BET, TEM and UV-Vis spectra. The results of XRD indicate that, the crystal phase transforms from anatase to rutile structure gradually with increase of annealing temperature from 300 to 700 ℃. XPS studies indicate that the nitrogen atom enters the TiO2 lattice and occupies the position of oxygen atom. Agglomeration of particles is found in TEM images after annealing. BET results show that the specific surface areas of N-doped samples from 44.61 to 38.27 m2/g are smaller than that of Degussa TiO2. UV-Vis spectra indicate that the absorption threshold shifts gradually with increase of annealing temperature, which shows absorption in the visible region. The influence of annealing condition on the photocatalytic property has been researched over water decomposition to hydrogen, indicating that nitrogen raises the photocatalytic activity for hydrogen evolution, and the modified TiO2 annealed for 2 h at 400 ℃ under gas of NH3/N2 (V/V＝1/2) mixture shows better efficiency of hydrogen evolution. Furthermore, the N-doped TiO2 nanoparticle catalysts have obvious visible light activity, evidenced by hydrogen evolution under visible light (λ＞400 nm) irradiation. However, the catalytic activity under visible light irradiation is absent for Degussa as reference and the N-doped TiO2 annealed at 700 ℃.     

Thermal stability of anatase TiO2 aerogels

Titanium dioxide (TiO₂) aerogels were prepared with sol–gel ambient pressure drying method by using titanium tetrachloride (TiCl₄) as precursor and tetraethoxysilane as modifier, calcinated at different temperature and characterized by X‐ray diffraction, transmission electron microscopy and small angle X‐ray scattering. The results showed that the TiO₂ aerogels remained amorphous under 500 °C, changed to anatase from 600 °C and further changed to rutile from 900 °C. Between 60 °C and 500 °C, the primary particles within the samples concentrated mainly upon small sizes, enlarged and diverged remarkably above 600 °C. The crystalline grains grew and agglomerated with the rise of the calcination temperature. The TiO₂ aerogels at a temperature higher than 800 °C have better stability than anatase because of the formation of partial Ti―O―Si bonds. Copyright © 2016 John Wiley & Sons, Ltd.     

Influence of electrolyte temperature on pure titanium modified by electrochemical treatment for implant

This study examined the effect of electrolyte temperature on the surface characteristics of anodized pure titanium in DL ‐α‐glycerophosphate (DL ‐α‐GP) and calcium acetate (CA). The anodic oxide films contained a large proportion of anatase with some rutile. The relative intensity of the anatase peaks and the surface roughness increased with increasing electrolyte temperature. As the electrolyte temperature was increased, the pore size increased to 1–4 µm, and the apatite crystals became coarser and denser. The amount of calcium and phosphate adsorbed increased with increasing electrolyte temperature. The anodizing voltage reached the onset of constant voltage mode faster with decreasing electrolyte temperature. A higher voltage is essential for the electrolyte at lower temperature to reach the constant voltage mode during this initial period. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of annealing temperatures and of high content of the iron ion (Fe<Superscript>3+</Superscript>)-doping on transition anatase–rutile phase of nanocrystalline TiO<Subscript>2</Subscript> thin films prepared by sol–gel spin coating

Titanium dioxide doped with iron (III) was prepared by sol–gel Spin Coating method. The phase structures, morphologies, particle size of the doped TiO₂ have been characterized by X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and ultraviolet–visible (UV–Vis) spectrophotometer. The XRD and Raman results show that the 10% Fe³⁺-doped TiO₂ thin films crystallize in anatase phase between 600 and 800 °C, and into the anatase–rutile phase at 1,000 °C, and further into the rutile phase when the content of Fe³⁺ increases (20%). The grain size calculated from XRD patterns shows that the crystallinity of the obtained anatase particles increased from 39.4 to 43.4 nm as the temperature of annealing increase, whereas the size of rutile crystallites increases, with increasing Fe³⁺ concentrations from 36.9 to 38.1 nm. The AFM surface morphology results confirmed that the particle size increases by increasing the annealing temperature and also with an increasing of Fe³⁺ content. The optical band gap (E _g) of the films was determined by the UV–Vis spectrophotometer. We have found that the optical band gap decreased with an increasing of annealing temperatures and also with an increasing of Fe³⁺ content.     

掺杂二氧化锡的二氧化钛的光学性质及其光催化特性

二氧化钛多相催化是一种极具前途的环境污染深度净化技术。 本文以钛酸四丁酯和四氯化锡为原料,无水乙醇为溶剂,采用溶胶-凝胶法制备了掺杂二氧化锡的二氧化钛薄膜和复合氧化物粉体。通过测量薄膜的吸收光谱推算光学能隙,结果发现掺杂样品的光学能隙比纯二氧化钛样品有所变小。随着热处理温度的提高,掺杂和纯二氧化钛样品的光学能隙都略微降低。X-射线衍射分析表明,复合氧化物粉体的热处理温度对样品的晶体结构和光催化性能有重要影响。以掺杂二氧化锡5 % 摩尔比的样品与纯二氧化钛对照,500 ℃以下热处理样品以锐钛矿结构为主,600 ℃热处理样品为锐钛矿与金红石相共存,并显示了较好的光催化性能。透射电子显微镜观察显示,同样600 ℃热处理,掺杂样品要比纯二氧化钛具有更小的颗粒尺寸。在700 ℃热处理的样品中,掺杂样品只存在金红石相而纯二氧化钛样品中仍存有锐钛矿相。用阿伦尼乌斯经验关系式推测的晶粒生长的活化能,纯二氧化钛47.486 kJ.mol, 掺杂5 % 摩尔比的复合氧化物样品33.103 kJ.mol。以亚甲基蓝为降解物质,考察了掺杂量和热处理温度对样品的光催化性能。     

Use of anodized tubular TiO<Subscript>2</Subscript> photoanodes in light-sensitized enzymatic hydrogen production

In this study, an anodized tubular TiO₂ electrode (ATTE) on titanium foil was prepared and used both as a photoanode and a cathode in an enzymatic photoelectrochemical system to split water into oxygen and hydrogen. The effect of applied voltage when anodized, thickness of the foil, electrolytes, annealing temperature, and cathodes was investigated (optimum conditions: 20 V of applied voltage in 0.5 vol.% of hydrofluoric acid, 0.25-mm foil thickness, and 450–650°C annealing temperature). The samples with higher activities had similar X-ray diffraction (XRD) patterns, clearly indicating that the samples showing the highest evolution rate were composed of both anatase and rutile, while those showing a lower evolution rate were made of either anatase or rutile. The ATTE successfully replaced the Pt mesh cathode and the immobilization of the enzyme enhanced the H₂ evolution by 50% (from ca. 66 to 99 μmol/(h × cm²)). Moreover, the use of KOH instead of Tris–HCl buffer in a cathodic compartment further increased the H₂ evolution to 115 μmol/(h × cm²).