Nanoscale morphology of melt crystallized polyethylene/graphite (HOPG) interphase

High density polyethylene (PE) was crystallised from the melt on freshly cleaved surface of highly oriented pyrolitic graphite (HOPG) or mica. Atomic force microscopy (AFM) studies of structure of the polymer surface adjacent to the graphite or mica were performed after peeling of from the substrate. Significant differences of crystalline structure on the interface were found between PE crystallised on graphite and mica. The surface of polyethylene crystallised on graphite shows large areas with regularly arranged rectangular structures. These objects (ca 20‐80 nm big) probably represent the nucleation centres of the lamellar growth. The surface of polyethylene crystallised at mica surface shows some dot‐like structures showing no particular arrangement.     

AFM imaging of adsorbed Nafion polymer on mica and graphite at molecular level

Perfluorosulfonic acid ionomer (PFSA, specifically Nafion at EW = 975 g/mol) was visualized at the single molecule level using atomic force microscopy (AFM) in liquid. The diluted commercial Nafion dispersion shows an apparent M(w) = 1430 kg/mol and M(w)/M(n) = 3.81, which is assigned to chain aggregation. PFSA aggregates, imaged on mica and HOPG during adsorption from EtOH-H(2)O solvent at pH(e) 3.0 (below isoelectric point), showed a stable, segmented rod-like conformation. This structure is consistent with earlier NMR, SAXS/SANS, and TEM results that support a stiff helical Nafion conformation with long persistence length, a sharp solvent-polymer interface, and an extension of the sulfonated side chain into solution. Adsorption of Nafion structures on HOPG was observed at even higher pH(e) from EtOH due to screening of the repulsive electrostatic interaction in lower dielectric constant solvent, while the chain adopted an expanded coil conformation. These measurements provided direct evidence of the chain aggregation in EtOH-H(2)O solution and revealed their equilibrium conformations for adsorption on two model surfaces, highly ordered pyrolitic graphite (HOPG) and mica. The commercial Nafion dispersion was autoclaved at 0.10% w/w in nPrOH/H(2)O = 4:1 v/v solvent at 230 °C for 6 h to give a single-chain dispersion with M(w) = 310 kg/mol and M(w)/M(n) = 1.60. The autoclaved chains adopt an electrostatically stabilized compact globule conformation as observed by AFM imaging of the single PFSA molecules after rapid deposition on mica and HOPG at a low surface coverage.     

Structure of salted and discharged globules of hydrophobic polyelectrolytes adsorbed from aqueous solutions

In this article, we compare structures of protonated poly(2-vinylpyridine) globules (2D compact coils on the surface) adsorbed on the mica surface from aqueous solution when the shrinking is brought about either by discharging the molecules at an elevated pH or by adding monovalent and polyvalent salts. We study the structure of the PE coils using in situ atomic force microscopy experiments in aqueous solutions in a liquid cell. The abrupt coil-to-globule transition caused by pH changes and the discharge of polymer chains resulted in compact globules. If the pH corresponding to extended coil conformation remains unchanged, the coil shrinks due to the added salt. The size of the globule in the latter case corresponds to the unperturbed dimension of the polymer coil. There is no essential difference in the dimensions of the globules as obtained in the presence of monovalent and multivalent counterions for the studied ionic strength. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1623–1627, 2010     

Influence of the poly(propylene imine) generation in the LC properties of ionic codendrimers bearing fluorinated and perhydrogenated chains

A series of codendrimers constituted by the first five generations of poly(propylene imine) (PPI) ionically substituted with 2H,2H,3H,3H‐perfluoroundecanoic acid (af) and undecanoic acid (ac) in a fixed ratio (1:3) (af:ac) have been synthesized and their supramolecular organization has been investigated both in the liquid crystalline state and on a surface. Incompatibility generated by combining fluorinated and perhydrogenated chains in the same molecule causes a peculiar mesomorphic behavior depending on the generation of the codendrimers. Thus smectic A, frustrated smectic A or rectangular columnar mesophases have been detected. Despite their different liquid crystalline organization, they are capable to self‐assemble in homogeneous molecular length layers on a surface, namely mica as revealed by atomic force microscopy (AFM) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49: 278–285, 2011     

Nanofiber formation of hydroxylpropylcellulose (HPC)

The aggregative behaviors of hydroxypropylcellulose (HPC) molecules in aqueous solution and on substrates have been observed by employing laser light scattering (LLS) and, after deposition on a mica surface, atomic force microscopy (AFM). LLS studies showed that the HPC molecules formed large aggregates through self-association when the concentration of the solution was above the critical concentration c(t). AFM measurements revealed that when a dilute aqueous solution of HPC molecules was deposited onto a mica substrate at a temperature below its lower critical solution temperature (LCST) thin nanofibers were formed with a height of 0.9 nm, whereas thick nanofibers were formed when an aqueous solution of HPC molecules was deposited onto a substrate above its LCST. Furthermore, the growth of nanofibers led to the formation of fan structures.     

Supramolecular nanostructures from self‐assembly of T‐shaped rod building block oligomers

T‐shaped coil–rod–coil oligomers, consisting of a dibenzo[a,c]phenazine unit and phenyl groups linked together with acetylenyl bonds at the 2,7‐position of dibenzo[a,c]phenazine as a rigid segment have been synthesized. The coil segments of these new molecules composed of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO) incorporating lateral methyl groups between the rod and coil segment and two flexible alkyl groups connecting with the rigid segment at the 4,6‐position of dibenzo[a,c]phenazine, respectively. The experimental results reveal that the length of the flexible PEO coil chain influence construction of various supra‐nanostructures from lamellar structure to rectangular columnar structure. It is also shown that introduction of different length of alkyl side chain groups in the backbone of the T‐shaped molecules affect the self‐organization behavior to form hexagonal perforate layer or oblique columnar structures. In addition, lateral methyl groups attached to the surface of rod and coil segments, dramatically influence the self‐assembling behavior in the crystalline phase. T‐shaped molecules containing a lateral methyl group at the surface of rod and PEO coil segments, self‐assemble into 3D body‐centered tetragonal structures in the crystalline phase, while molecules without a lateral methyl group based on PEO coil chain self‐organize into 2D oblique columnar crystalline structures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5021–5028     

Cascade of coil-globule conformational transitions of single flexible polyelectrolyte molecules in poor solvent

We show that hydrophobic flexible polyelectrolyte molecules of poly(2-vinylpyridine) and poly(methacryloyloxyethyl dimethylbenzylammonium chloride) are trapped and frozen due to adsorption on the mica surface, and the observed AFM single molecule structures reflect the molecular conformation in solution. An increase of the ionic strength of the solution induces the cascade of abrupt conformational transitions due to the intrachain segregation from elongated coil to compact globule conformations through intermediate pearl necklace-globule conformations with different amounts of beads per chain. The length of the necklaces and the number of beads decrease, while the diameter of beads increases with the increase of ionic strength. Coexistence at the same time of extended coils, necklaces with different amounts of beads, and compact globules indicates the cascade of the first-order-type phase transitions.     

Vapor‐induced spreading dynamics of adsorbed linear and brush‐like macromolecules as observed by environmental SFM: Polymer chain statistics and scaling exponents

Scaling exponents ν, that describe the correlation between mean square end‐to‐end distances and contour lengths of macromolecules, were determined by statistical analysis of scanning force micrographs of single linear poly(2‐vinylpyridine) and brush‐like poly(butanoate‐ethyl methacrylate)‐graft‐poly(n‐butyl acrylate) macromolecules adsorbed on mica. Using an atmosphere‐controlled scanning force microscope, single adsorbed molecules were collapsed and re‐expanded upon being exposed to alcohol and water vapor, respectively. This manipulated collapse‐unfolding was used to equilibrate the molecular structure/conformation. The in situ and real‐time scanning force microscopy analysis allows the scientist to quantitatively characterize end‐to‐end distances and contour lengths of the molecules directly on the image and to observe differences in the spreading dynamics for the two types of macromolecules. A distinct difference has been observed between the expanded two‐dimensional (2D) conformations of linear and brush‐like polymer chains. Whereas a scaling exponent ν of 0.73 was found for the expanded 2D conformation of the linear molecules, a ν‐value of 0.53 was determined for the expanded 2D conformation of the seemingly stiffer brush‐like molecules. A theoretical explanation of the differences between the 2D conformations of brush‐like and linear macromolecules is proposed here. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2368–2379, 2007     

Conformational transitions of flexible hydrophobic polyelectrolytes in solutions of monovalent and multivalent salts and their mixtures

Conformations of cationic polyelectrolytes (PEs), a weak poly(2-vinylpyridine) (P2VP) and a strong poly(N-methyl-2-vinylpyridinium iodide) (qP2VP), adsorbed on mica from saline solutions in the presence of counterions of different valences are studied using in situ atomic force microscopy (AFM). Quantitative characteristics of chain conformations are analyzed using AFM images of the adsorbed molecules. The results of the statistical analysis of the chain contour reveal collapse of the PE coils when ionic strength is in a range from tens to hundreds of millimoles per kilogram and re-expansion of the coils with a further increase of ionic strength up to a region of the saturated saline solutions. The competition between monovalent and multivalent counterions simultaneously present in solutions strongly affects conformations of PE chains even at a very small fraction of multivalent counterions. Shrinkage of PE coils is steeper for multivalent counterions than for monovalent counterions. However, the re-expansion is only incremental in the presence of multivalent counterions. Extended adsorbed coils at low salt concentrations and at very high concentrations of monovalent salt exhibit conformation corresponding to a 2D coil with 0.95 fraction of bound segments (segments in "trains") in the regime of diluted surface concentration of the PE. Shrunken coils in the intermediate range of ionic strength resemble 3D-globules with 0.8 fraction of trains. The incrementally re-expanded PE coils at a high ionic strength remain unchanged at higher multivalent salt concentrations up to the solubility limit of the salt. The formation of a strong PE complex with multivalent counterions at high ionic strength is not well understood yet. A speculative explanation of the observed experimental result is based on possible stabilization of the complex due to hydrophobic interactions of the backbone.     

An NMR investigation on the phase structure and molecular mobility of the novel exfoliated polyethylene/palygorskite nanocomposites

Novel exfoliated polyethylene (PE)/palygorskite nanocomposites prepared by in situ polymerization are characterized by solid‐state nuclear magnetic resonance (NMR). The phase structure and molecular mobility are investigated by a combination of proton and carbon NMR. The results showed that incorporation of small amounts of palygorskite had great influence on the phase structure and molecular mobility. The incorporated palygorskite hindered the crystallization process and introduced motion‐hindered chains in the NMR crystalline and amorphous phase. ¹³C cross‐polarization and magic‐angle spinning NMR revealed two orthorhombic crystalline phase with different line‐width. The chain mobility of orthorhombic crystalline phase with broad resonance line is obviously hindered compared with the phase with narrow resonance line when the filler is introduced. Additionally, the results of pulsed field gradient NMR technique show those the tortuosities in the nanocomposites are much higher than that in the bulk PE. The self‐diffusion process of probe molecules is also influenced by the palygorksite load. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1363–1371, 2010     

Organization of polyhydroxyalkanoate synthase for in vitro polymerization as revealed by atomic force microscopy

Individual polyhydroxyalkanoate synthase molecules from Ralstonia eutropha (PhaCRe) were directly visualized on highly oriented pyrolytic graphite (HOPG) by atomic force microscopy (AFM). PhaCRe molecule was observed as a spherical particle of 2.9 +/- 0.4 nm in height and 28 +/- 4 nm in width. In vitro polymerization reaction on HOPG was carried out for 5 min by reacting the PhaCRe molecules with (R)-3-hydroxybutyryl-CoA monomers. The reaction product was then observed after the removal of water solution. Several PhaCRe molecules associated with each other to form an assembly, which was attached to a fibrillar structure of ca. 0.2-0.3 nm in height. The fibrillar structure that elongated from the PhaCRe assembly was interpreted as the poly[(R)-3-hydroxybutyrate] polymer chain. High resolution AFM suggested that the PhaCRe assembly was composed of 3-4 subunits of PhaCRe molecules. This was further supported by SDS-PAGE analysis of the cross-linked PhaCRe enzyme. These results suggest that more than two subunits of PhaCRe are necessary for the in vitro polymerization of PHB molecular chains.     

Ordered nanostructures from self‐assembly of H‐shaped coil–rod–coil molecules

A new class of π‐conjugated, skewed H‐shaped oligomers, consisting of biphenyl, phenylene vinylene, and phenylene ethynylene units as the rigid segment, were synthesized via Sonogashira coupling and Wittig reactions. The coil segments of these molecules were composed of poly(ethylene oxide) (PEO) or PEO with lateral methyl groups between the rod and coil segment, respectively. The experimental results revealed that the lateral methyl groups attached to the surface of the rod and coil segments dramatically influenced the self‐assembling behavior of the molecules in the crystalline phase. H‐shaped rod–coil molecules containing a lateral methyl group at the surface of the rod and PEO coil segments self‐assemble into a two‐dimensional columnar or a three‐dimensional body‐centered tetragonal nanostructures in the crystalline phase, whereas molecules lacking a lateral methyl group based on the PEO coil chain self‐organize into lamellar or hexagonal perforated lamellar nanostructures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 85–92     

Conformational change in an isolated single synthetic polymer chain on a mica surface observed by atomic force microscopy

The random coil conformation of an isolated conventional synthetic polymer chain was clearly imaged by atomic force microscopy (AFM). The sample used was a poly(styrene)-block-poly(methyl methacrylate) diblock copolymer. A very dilute solution of the copolymer with benzene was spread on a water surface. The structure thus formed on water was subsequently transferred and deposited onto mica at various surface pressures and observed under AFM. The AFM images obtained with films deposited at a low surface pressure (<0.1 mN/m) showed a single polystyrene (PS) block chain aggregated into a single PS particle with a single poly(methyl methacrylate) (PMMA) block chain emanating from the particle. Immediately after the deposition, the single PMMA block chain aggregated to form a condensed monolayer around the polystyrene particles. However, after exposing the deposited film to highly humid air for 1 day, the PMMA chains spread out so that the single PMMA block chain could be identified as a random coil on the substrate. The thin water layer formed on the mica substrate in humid air may enable the PMMA block chain to be mobilized on the substrate, leading to the conformational rearrangement from the condensed monolayer conformation to an expanded and elongated coil. The elongation of the PMMA chain was highly sensitive to the humidity; the maximum elongation was obtained at 79% relative humidity. The elongation was a slow process and took about 20 h.     

One‐step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP

Block copolymers of hyperbranched polyethylene (PE) and linear polystyrene (PS) or poly(methyl methacrylate) (PMMA) were synthesized via atom transfer radical polymerization (ATRP) with hyperbranched PE macroinitiators. The PE macroinitiators were synthesized through a “living” polymerization of ethylene catalyzed with a Pd‐diimine catalyst and end‐capped with 4‐chloromethyl styrene as a chain quenching agent in one step. The macroinitiator and block copolymer samples were characterized by gel permeation chromatography, ¹H and ¹³C NMR, and differential scanning calorimetry. The hyperbranched PE chains had narrow molecular weight distribution and contained a single terminal benzyl chloride per chain. Both hyperbranched PE and linear PS or PMMA blocks had well‐controlled molecular weights. Slow initiation was observed in ATRP because of steric effect of hyperbranched structures, resulting in slightly broad polydispersity index in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3024–3032, 2010     

Thermal properties and influence of orientation on crystalline morphologies in stereoblock polypropylene and related elastomers

Atomic force microscopy (AFM), small angle X‐ray scattering (SAXS), temperature modulated differential scanning calorimetry (TMDSC), variable heating rate DSC, an independent rapid heating rate method for melting points, and cyclic mechanical testing were used to study semicrystalline thermoplastic elastomeric polypropylenes (ELPPs) and related semicrystalline polyolefins including ethylene copolymers. Low crystallinity (ca., 9 and 15%) ELPP samples were studied by AFM in the nonoriented and melt‐oriented states. AFM images taken as a function of time after quenching of a melt‐drawn and highly nucleated film resolved details of secondary crystallization involving lateral growth on the ordered row‐nucleated structures. For nonoriented films, isothermal melt crystallization at high temperatures (110 °C) led to similar features for the two ELPPs. The dominant crystalline morphology studied by AFM consisted of small (several nm in width) granular crystallites organized into immature but large spherulites spanning tens of microns. A striking cross‐hatch morphology was detected in regions of the surface in 110 °C crystallized samples, which is contrasted with melt‐drawn films where row nucleated structures dominated the morphology in the film under no external stress. AFM was also used to monitor the morphological changes that occurred as the films were stretched at 25 °C. Break‐down of lamellae was observed, resulting in oriented narrow fibrils. Cyclic stress‐strain curves showed the expected result where lower crystallinity ELPPs had higher recoverable levels of set after both 100 and 500% elongation. TMDSC was used to resolve the broad melting and recrystallization regions in these low to medium crystallinity ELPP systems, and to contrast the results with ethylene copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Fabrication of well‐developed nano‐ribbons composed of hierarchically grown isotactic poly(methyl methacrylate) crystals on substrates

Well‐developed nano‐ribbons composed of isotactic poly(methyl methacrylate) (it‐PMMA) were successfully fabricated on mica via a simple solution‐casting method. Typical morphologies with about 0.6 nm thickness and 30–40 nm widths, thermal stability, and alternative structural analyses suggested that nano‐ribbons were composed of two‐dimensional folded chain crystals of it‐PMMA. Typically, nano‐ribbons were developed by incubating tetrahydrofuran (THF) solutions at 20 °C for at least 2 months, more than equi‐amounts of water were added to incubated THF solutions, and solutions were cast onto mica. It was found that, after the aforementioned incubation of THF solutions, it‐PMMA chains adopted trans‐trans (tt) conformations, which are precursors for it‐PMMA crystals, suggesting that THF is a unique solvent for it‐PMMA. By adding water, a poor solvent for it‐PMMA, to THF solutions, it‐PMMA aggregates formed with several hundreds of nanometer sizes, further promoting an increase in the population of the tt conformation. Nano‐ribbons were similarly formed on silicon wafer substrates, suggesting that hydrophilic substrates were essential for the formation of nano‐ribbons. Interestingly, a modulation of the above described method, with the slight evaporation of THF from a THF/water solution before casting onto mica, succeeded in the development of epitaxially adsorbed nano‐ribbons. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3098–3110, 2009     

Single—Molecular Imaging of Anticoagulation Factor I From Snake Venom by Atomic Force Microscopy

ＡｎｔｉｃｏａｇｕｌａｔｉｏｎｆａｃｔｏｒＩ (ＡＣＦＩ)ｆｒｏｍｔｈｅｖｅｎｏｍｏｆＡｇｋｉ ｓｔｒｏｄｏｎａｃｕｔｕｓｉｓａｂｉｎｄｉｎｇｐｒｏｔｅｉｎｔｏａｃｔｉｖａｔｅｄｃｏａｇｕｌａｔｉｏｎｆａｃ ｔｏｒＸ (ＦＸａ)ａｎｄｐｏｓｓｅｓｓｅｓｍａｒｋｅｄａｎｔｉｃｏａｇｕｌａｎｔａｃｔｉｖｉｔｙ .Ｓｉｎ ｇｌｅＡＣＦＩｍｏｌｅｃｕｌｅｈａｓｂｅｅｎｓｕｃｃｅｓｓｆｕｌｌｙｉｍａｇｅｄｉｎａｉｒｂｙｔａｐ ｐｉｎｇｍｏｄｅａｔｏｍｉｃｆｏｒｃｅｍｉｃｒｏｓｃｏｐｙ (ＡＦＭ )ｗｉｔｈｈｉｇｈ ｒｅｓ…     

Direct observation of uncoated spectrin with atomic force microscope

Spectrin molecules extracted from human blood ceil membrane have been examined by atomic force microscopy (AFM) without using shadowing or staining procedures. A drop of the solution containing spectrin molecules was deposited on the freshly deaved mica substrate. After about 1 min, the residual solution was removed with a piece of filter paper. Afterwards the sample was imaged with a home-made atomic force microscope (AFM) in air in a constant force mode. The obtained AFM images revealed that the spectrin molecules prepared from the above procedures exhibit several kinds of structures as follows: (i) the compact rod-like spectrin heterodimers with a length of around 100 nm; (ii) bent or curved linear tetramers with a length of around 200 nm; (iii) somewhat curved spectrin hexamers, octomers or decamers with lengths of about 300, 400, or 500 nm; and (iv) high oligomers with a length above 1 000 nm.     

Photoreactive main chain liquid crystalline polyesters containing oxadiazole and bis(benzylidene) cycloalkanone units

Photoreactive main chain liquid crystalline polyesters containing oxadiazole and bis(benzylidene)cycloalkanone moieties were synthesized and characterized by structural, thermal, mesomorphic, and optical measurements. The bis(benzylidene) cycloalkanone chromophores in the main chain can constitute both as a mesogen and photoreactive center, whereas 1,3,4‐oxadiazole is a well‐known fluorophore. The thermal properties of polymers were found to be inversely proportional not only to the spacer length but also to ring‐size of cycloalkanones. Hot stage polarized optical microscopic investigations displayed enantiotropic nematic liquid crystalline phases and development of grainy to schlieren textures depends on the length of flexible spacer in the polymer backbone which was in accordance with DSC analysis. Both photoisomerization and photodimerization are observed from the absorption spectra and discussed. The fluorescence spectra in solution state at various concentrations showed that the polymers show blue‐emission maxima and the Stokes shifts being 48–49 nm. The energy transfer occurred when increasing the concentration of the solution. The band gap energies calculated from the absorption spectra are in the range of 3.17–3.41 eV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5760–5775, 2008     

Diameter dependence of hybrid shish‐kebab structure in polyethylene/carbon material fiber composites

PE chains can proceed template crystal growth on multi‐walled carbon nanotubes (MWCNTs) surface and develop into hybrid shish‐kebab (HSK) abiding by the “soft epitaxy” mechanism. For large‐diameter carbon nanofiber (CNF), the lattice matching and epitaxy are the main mechanism for hybrid structure formation under the static state. This study provided a new understanding of HSK formation, wherein PE underlay on the surface of carbon material fiber played an important role. The shear flow induced PE chains to orient along the CNF surface and formed PE underlayer. Subsequently, ordered subglobules were periodically formed along the CNF axis and finally evolved to typical HSK structures with well‐aligned arraying PE lamellae rather than random one. As the diameter increased to 7000 nm, even though the graphite (002) planes in carbon fibers (CFs) was similar to that in CNFs, the attractive van der Waals interactions between CFs and PE chains were too weak to drive enough PE chains to absorb on the CFs surface and form PE underlay even under the shear flow, leading to the absence of PE lamellae on the CF surface. Based on that, the “soft epitaxy” could be the main formation mechanism of HSK structures for carbon material fibers regardless of their diameters. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 297–303