Synthesis,characterization, and properties of new thermally curable polyetheresters containing benzoxazine moieties in the main chain

High molecular weight polyetheresters (PEE) containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diol functional monomer is synthesized through the Mannich reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and 2‐(2‐aminoethoxy)ethanol. Polycondensation of the resulting benzoxazine dietherdiol with adipoyl chloride and terephthaloyl dichloride in the presence of triethyl amine yields the corresponding PEE with the molecular weights of 34.000 Da. The structures of the precursor diol monomer and the resulting PEEs are confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H‐NMR) analysis. Curing behavior of both the monomer and polymers has also been studied by differential scanning calorimetry (DSC). Flexible free standing transparent films of the PEEs are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 140 and 220 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 414–420, 2008     

Synthesis,characterization, and thermally activated curing of oligosiloxanes containing benzoxazine moieties in the main chain

Oligosiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional monomer is synthesized through the Mannich and ring closing reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde and allylamine. Hydrosilylation reaction of the resulting diallylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding poly(B‐ala‐tetramethyl disiloxane)s (PBTMDS) with the molecular weights in the range of 1800–4100 Da. The structures of the precursor diallyl monomer and the resulting polymers are confirmed by FT‐IR and ¹H NMR analysis. Curing behavior of both the monomer and polymers has also been studied by Differential Scanning Calorimetry (DSC). Flexible free standing transparent films of the oligosiloxanes are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 100 and 180 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 804–811, 2009     

Polysiloxane‐containing benzoxazine moieties in the main chain

Polysiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional benzoxazine monomer is synthesized through the Mannich and respective ring closing reactions of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and allyamine. Subsequent hydrosilylation reaction of the resulting allylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding oligo(B‐ala‐tetramethyldisiloxane)s (OBTMDS). Using the anionic polymerization route, OBTMDS was then converted to poly(bisbenzoxazinedimethylsiloxane)s (PBDMSs) by reacting with readily available cyclic oligomer octamethylcyclotetrasiloxane (D4) or decamethylcyclopentasiloxane (D5) in the presence of tetrabutylammonium hydroxide as catalyst. The structures of the precursor diallyl monomer, the intermediate oligomer, and the resulting polymers are confirmed by Fourier transform infrared and ¹H NMR analysis. Curing behavior of the products at various stages has also been studied by differential scanning calorimetry. Flexible transparent films of the PBDMSs are obtained by solvent casting. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Thermally curable benzoxazine monomer with a photodimerizable coumarin group

A new monomer, 4‐methyl‐9‐p‐tolyl‐9,10‐dihydrochromeno[8,7‐e][1,3]oxazin‐2(8H)‐one, possessing both benzoxazine and coumarin rings in its structure was synthesized by the reaction of 4‐methyl‐7‐hydroxycoumarin, paraformaldehyde, and p‐toluidine in methanol at 40 °C and characterized with spectral analysis. Upon photolysis around 300 nm, this monomer underwent dimerization via the [2πs+2πs] cycloaddition reaction. Photodimerization reactions were investigated with UV and ¹H NMR spectroscopy measurements. The thermal ring‐opening reaction of the benzoxazine ring was demonstrated with differential scanning calorimetry measurements. The thermal behavior of the cured product was also investigated with thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1670–1676, 2007     

Synthesis and characterization of novel renewable polyesters based on 2,5‐furandicarboxylic acid and 2,3‐butanediol

Novel polyesters from 2,5‐furandicarboxylic acid or 2,5‐dimethyl‐furandicarboxylate and 2,3‐butanediol have been synthesized via bulk polycondensation catalyzed by titanium (IV) n‐butoxide, tin (IV) ethylhexanoate, or zirconium (IV) butoxide. The polymers were analyzed by size exclusion chromatography, nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy (FTIR), matrix‐assisted laser ionization‐desorption time‐of‐flight mass spectrometry, electrospray ionization time‐of‐flight mass spectrometry, electrospray ionization quadruple time‐of‐flight mass spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Fully bio‐based polyesters with number average molecular weights ranging from 2 to 7 kg/mol were obtained which can be suitable for coating applications. The analysis of their thermal properties proved that these polyesters are thermally stable up to 270–300 °C, whereas their glass transition temperature (T_g) values were found between 70 and 110 °C. Furthermore, a material was prepared with a molecular weight of 13 kg/mol, with a T_g of 113 °C. This high T_g would make this material possibly suitable for hot‐fill applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hydrogen‐bonding characteristics and unique ring‐opening polymerization behavior of Ortho‐methylol functional benzoxazine

Monofunctional benzoxazine with ortho‐methylol functionality has been synthesized and highly purified. The chemical structure of the synthesized monomer has been confirmed by ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FT‐IR) and elemental analysis. One‐dimensional (1D) ¹H NMR is used with respect to varied concentration of benzoxazines to study the specific nature of hydrogen bonding in both ortho‐methylol functional benzoxazine and its para counterpart. The polymerization behavior of benzoxazine monomer has been also studied by in situ FT‐IR and differential scanning calorimetry, experimentally supporting the polymerization mechanism of ortho‐methylol functional benzoxazine we proposed before. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3635–3642     

Synthesis of narrow‐polydispersity degradable dendronized aliphatic polyesters

The divergent dendronization of an ?‐caprolactone‐based polymer has been performed to provide access to dendronized polymers with sufficient biocompatibility and degradability for use as drug‐delivery scaffolds. The synthesis was performed through the tin(II) 2‐ethylhexanoate‐catalyzed polymerization of a γ‐functionalized ?‐caprolactone monomer, followed by the divergent growth of pendant polyester dendrons at each repeat unit. The resulting dendronized polymers were obtained up to the fourth generation with molecular weights as high as 80,000 Da and with polydispersities between 1.11 and 1.22. The fourth‐generation hydroxyl‐terminated dendronized polymer was degradable under a variety of aqueous conditions. A comparison of the dendronization approach with a procedure involving the ring‐opening polymerization of a second‐generation dendritic macromonomer reveals that the former procedure is best suited for the preparation of this family of dendronized polyesters because it requires shorter reaction times and affords materials with higher degrees of polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3563–3578, 2004     

A new cardo bisphenol monomer containing pendant azido group and the resulting aromatic polyesters

Expanding on our strategy to synthesize aromatic step‐growth polymers containing pendant clickable azido groups via functional monomer approach, we have now designed and synthesized a new cardo bisphenol, viz., 2‐(2‐azidoethyl)‐3, 3‐bis(4‐hydroxyphenyl) isoindolin‐1‐one (PPH‐N₃). PPH‐N₃ was conveniently synthesized starting from commercially available phenolphthalein by a three‐step route in an overall yield of 65% using simple organic transformations. Aromatic (co)polyesters bearing pendant azido groups were synthesized by low‐temperature solution polycondensation of PPH‐N₃ or different molar ratios of PPH‐N₃ and bisphenol‐A (BPA) with aromatic diacid chlorides in dry dichloromethane in the presence of triethylamine (TEA) as a base. The formation of medium to reasonably high‐molecular‐weight (co)polyesters was evidenced from intrinsic viscosity and number‐average molecular‐weight measurements that were in the range 0.52–0.85 dL/g and 16,700–28,200, respectively. Tough, transparent, and flexible films could be cast from chloroform solutions of these (co)polyesters. (Co)polyesters were characterized using FTIR, ¹H NMR, ¹³C NMR spectroscopy, XRD, and TGA. The thermal curing reaction of (co)polyesters involving decomposition of azido groups was studied by DSC analysis. The chemical modification of a representative copolyester containing pendant azido groups was carried out quantitatively using catalyst‐free azide‐maleimide cycloaddition reaction with two maleimides, namely, N‐methylmaleimide and N‐hexylmaleimide. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1516–1526     

LCP aromatic polyesters by esterolysis melt polymerization

Polyarylates have previously been synthesized from acetate esters via esterolysis (loss of methyl acetate). This polycondensation can be extended to p‐substituted aromatic monomers for liquid crystal polyesters (LCPs). For AB‐type polymers, methyl p‐acetoxybenzoate and methyl 6‐acetoxynaphthoate were copolymerized to an LCP with reasonable molecular weights. Benzoate esters, methyl 4‐benzoyloxybenzoate (MBB) and methyl 6‐benzoyloxy‐2‐naphthoate (MBN), are also investigated. Several tin and antimony oxide catalysts were effective. The rate of esterolysis polymerization of MBB and MBN is slower than that of the corresponding acidolysis melt polymerization, but fast enough to give relatively high‐molecular‐weight polymers and similar thermal stability as commercial LCP prepared by acidolysis. Using these alternative benzoyloxy groups significantly reduced the color problem, because ketene loss cannot occur. Esterolysis melt polymerizations leading to AB/AABB‐type LCPs were performed using either dimethyl 2,6‐naphthalene dicarboxylate (DMND) or dimethyl terephthalate (DMT) with methyl 4‐acetoxybenzoate and phenylhydroquinone diacetate with tin and antimony catalysts. DMT‐based monomer compositions show much faster polymerization than DMND‐based compositions using antimony oxide catalyst. All these LCPs show a T_g in the 140–170 °C range as a result of the inclusion of the naphthalene and/or phenyl hydroquinone units in the polymer chain. Compositions completely off‐balanced on either side still lead to relatively high‐molecular‐weight copolyesters because either excess monomer can be removed during polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3586–3595, 2000     

Reversible addition‐fragmentation chain transfer polymerization of methacrylates containing hole‐ or electron‐transporting groups

The controlled/living radical polymerization of 2‐(N‐carbazolyl)ethyl methacrylate (CzEMA) and 4‐(5‐(4‐tert‐butylphenyl‐1,3,4‐oxadiazol‐2‐yl)phenyl) methacrylate (t‐Bu‐OxaMA) via reversible addition‐fragmentation chain transfer polymerization has been studied. Functional polymers with hole‐ or electron‐transfer ability were synthesized with cumyl dithiobenzoate as a chain transfer agent (CTA) and AIBN as an initiator in a benzene solution. Good control of the polymerization was confirmed by the linear increase in the molecular weight (MW) with the conversion. The dependence of MW and polydispersity index (PDI) of the resulting polymers on the molar ratio of monomer to CTA, monomer concentration, and molar ratio of CTA to initiator has also been investigated. The MW and PDI of the resulting polymers were well controlled as being revealed by GPC measurements. The resulting polymers were further characterized by NMR, UV‐vis spectroscopy, and cyclic voltammetry. The polymers functionalized with carbazole group or 1,3,4‐oxadiazole group exhibited good thermal stability, with an onset decomposition temperature of about 305 and 323 °C, respectively, as determined by thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 242–252, 2007     

Well‐defined polycaprolactone precursors for low surface‐energy polyurethane films

For the purpose of developing model coating systems, it is important to use well‐defined coating precursors. In this work, polyester oligomers were synthesized by controlled ring‐opening polymerization of ε‐caprolactone and 4‐tert‐butyl‐ε‐caprolactone via an activated monomer mechanism. These well‐defined oligomers, including 3‐armed hydroxyl‐functionalized polyesters and perfluoroalkyl‐end‐capped linear polyesters, have been obtained with controlled functionality and low‐molecular weight polydispersity and without the formation of cyclic structures, as demonstrated by MALDI‐ToF MS analyses. The polymer architecture and functionality can be tuned by using different initiating alcohols. These oligomers have been used as precursors to prepare model low surface‐energy polyurethane coatings. Upon the addition of about 1 wt % of fluorine in the polyurethane films, the advancing contact angles for water and hexadecane have been increased to 105° and 78°, respectively; the surface enrichment of fluorinated species has been confirmed by X‐ray photoelectron spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 218–227, 2008     

Copolymerization of fluorene‐based main‐chain benzoxazine and their high performance thermosets

A series of fluorene‐based benzoxazine copolymers were synthesized from the mixture of 9,9‐bis(4‐hydroxyphenyl)fluorene and bisphenol A, and 4,4′‐diaminodiphenyloxide and paraformaldehyde. And the cured polybenzoxazine films derived from these copolymers were also obtained. Fourier transform infrared spectroscopy (FTIR) and hydrogen nuclear magnetic resonances confirmed the structure of these benzoxazines. Their molecular weight was estimated by gel permeation chromatography. The curing behavior of the precursors was monitored by FTIR and differential scanning calorimetry. Dynamic mechanical analysis and thermogravimetric analysis were performed to study the thermal properties of the cured polymers. The cured polybenzoxazines exhibit excellent heat resistance with glass transition temperatures (T_g) of 286–317°C, good thermal stability along with the values of 5% weight loss temperatures (T₅) over 340°C, and high char yield over 50% at 800°C. The mechanical properties of the cured polymers were also measured by bending tests. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Phosphorus‐containing renewable polyester‐polyols via ADMET polymerization: Synthesis,functionalization, and radical crosslinking

An α,ω‐diene containing hydroxyl groups was prepared from plant oil‐derived platform chemicals. The acyclic diene metathesis copolymerization (ADMET) of this monomer with a phosphorus‐containing α,ω‐diene (DOPO II), also plant oil derived, afforded a series of phosphorus containing linear polyesters, which have been fully characterized. The backbone hydroxyls of these polyesters have been acrylated and radically polymerized to produce crosslinked polymers. The thermomechanical and mechanical properties, the thermal stability, and the flame retardancy of these phosphorus‐based thermosets have been studied. Moreover, methyl 10‐undecenoate has been used as chain stopper in selected ADMET polymerizations to study the effect of the prepolymers' molecular weights on the different properties of the final materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1649–1660, 2010     

Soluble tin(II) macroinitiator adducts for the controlled ring‐opening polymerization of lactones and cyclic carbonates

Polyesters and poly(ester carbonates) were synthesized via ring‐opening polymerization with new tin(II) macroinitiator adducts containing oligomeric L ‐lactide (LLA), rac‐lactide (rac‐LA), and ?‐caprolactone (CL). The novel initiating species were synthesized by the reaction of LLA, rac‐LA, or CL with Sn(OEt)₂ (monomer concentration/initiator concentration ≤20) and then were dissolved in methylene chloride or toluene and stored in a stoppered flask for the subsequent ring‐opening polymerization of cyclic esters and carbonates. The soluble tin alkoxide macroinitiators yielded predictable and quantitative initiation of polymerization for up to 1 month of storage time at room temperature. The resulting polymers displayed low polydispersity (≤1.5), and a high monomer conversion (>95%) was obtained within relatively short polymerization times (≤2 h). Adjusting the monomer/macroinitiator ratio effectively controlled the molecular weights of the polymers. NMR was used to characterize the initiating species and polymer microstructure, and size exclusion chromatography was used to determine the molecular weight properties of the polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3434–3442, 2002     

High‐molecular‐weight AB‐type benzoxazines as new precursors for high‐performance thermosets

Novel high‐molecular‐weight polybenzoxazine precursors, namely AB‐type benzoxazine precursors, were synthesized from aminophenols and formaldehyde. Both ¹H NMR and IR confirmed the structure of the precursors, indicating the presence of a cyclic benzoxazine structure in the backbone of the precursors. The weight‐average molecular weight was estimated by size exclusion chromatography to be to in the range of 1300–4500. The precursors gave self‐standing thin films when their solutions were cast in dioxane over glass plates and dried, and upon a gradual thermal cure up to 250 °C, they afforded polybenzoxazine films. The viscoelastic analyses showed that the glass transition temperatures of the polybenzoxazine films obtained from these novel precursors were as high as 260–300 °C. Thermogravimetric analysis results indicated that the onset of decomposition and the char yield of the thermosets derived from these AB‐type precursors were higher than those of traditional polybenzoxazine. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1878–1888, 2007.     

Hyperbranched polyesters based on polycondensation of 1,3,5‐tris(2‐hydroxyethyl) cyanuric acid and 3,5‐dihydroxybenzoic acid

A series of hyperbranched polyesters was produced by the condensation of the monomer 3,5‐dihydroxybenzoic acid with 1,3,5‐tris(2‐hydroxyethyl) cyanuric acid as a trifunctional central core. The monomer‐to‐core ratio was varied between 3 and 45. The resulting polymers were phenolic‐terminated polyesters. The degree of branching of the polyesters was calculated according to the method described by Fréchet and was found to be in the range of 0.7–0.8. The number‐average molecular weights calculated via ¹H NMR spectroscopic degree‐of‐polymerization values are in reasonable agreement with the predicted values derived from the monomer‐to‐core ratio for all prepared polyesters. Thermal and photophysical properties were also studied. Glass‐transition temperatures were determined by differential scanning calorimetry and were found to be relatively independent of the theoretical molar mass. The polyesters were found to be blue emitters, and the solutions exhibited intense fluorescence, with a maximum of 430 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3278–3288, 2005     

Preparation and structure/property relationships of polyesters containing conjugated diacetylene groups

A series of novel polyesters containing conjugated diacetylenes (DA‐polyesters) were prepared from various diacetylene diols with/without methyl side groups and isomers of aromatic acid chlorides via an interfacial condensation. A fully aliphatic DA‐polyester was also prepared for comparison. All synthesised DA‐polyesters are soluble in m‐cresol, and the intrinsic viscosities were measured. In addition, compact and coherent films and sheets can be obtained from some of the polymers via solution or melt casting. The structure, morphology, and properties were characterized using spectroscopic methods, including FTIR, Raman, and WAXD and thermal analysis including TGA, DSC techniques. DMA was carried out on the solution‐cast thin films and melt‐processed samples. Close correlation was found between the structure and properties in these DA‐polyesters. In particular, through analysis using isothermal DSC and Raman spectroscopy, the solid‐state reactivity of the diacetylene groups in these polyesters was found related to the interchain spacings, which are, in turn, controlled by the molecular structure of the polymers. Results have shown that the aliphatic DA‐polyester behaves very differently compared to the aromatic ones. Distinct differences were also observed among meta‐ and para‐disubstituted isomers of the DA‐polyesters. Furthermore, the introduction of methyl side groups has dramatically affected the thermal and thermal mechanical behavior by altering the interchain spacing of the polymers. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 965–974, 1999     

Photoinitiated cationic polymerization of monofunctional benzoxazine

The photoinitiated ring‐opening cationic polymerization of a monofunctional benzoxazine, 3‐phenyl‐3,4‐dihydro‐2H‐1,3‐benzoxazine, with onium salts such as diphenyliodonium hexafluorophosphate and triphenylsulfonium hexafluorophosphate as initiators was examined. The structures of the polymers thus formed were complex and related to the ring‐opening process of the protonated monomer either at the oxygen or nitrogen atoms. The phenolic mechanism also contributed, but its influence decreased with decreasing monomer concentration. Thermal properties of the polymers were also investigated by differential scanning calorimetry and thermogravimetric analysis. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3320–3328, 2003