Efficient synthesis of monodisperse,highly crosslinked,and “living” functional polymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization

The facile and efficient one‐pot synthesis of monodisperse, highly crosslinked, and “living” functional copolymer microspheres by the ambient temperature iniferter‐induced “living” radical precipitation polymerization (ILRPP) is described for the first time. The simple introduction of iniferter‐induced “living” radical polymerization (ILRP) mechanism into precipitation polymerization system, together with the use of ethanol solvent, allows the direct generation of such uniform functional copolymer microspheres. The polymerization parameters (including monomer loading, iniferter concentration, molar ratio of crosslinker to monovinyl comonomer, and polymerization time and scale) showed much influence on the morphologies of the resulting copolymer microspheres, thus permitting the convenient tailoring of the particle sizes by easily tuning the reaction conditions. In particular, monodisperse poly(4‐vinylpyridine‐co‐ethylene glycol dimethacrylate) microspheres were prepared by the ambient temperature ILRPP even at a high monomer loading of 18 vol %. The general applicability of the ambient temperature ILRPP was confirmed by the preparation of uniform copolymer microspheres with incorporated glycidyl methacrylate. Moreover, the “livingness” of the resulting polymer microspheres was verified by their direct grafting of hydrophilic polymer brushes via surface‐initiated ILRP. Furthermore, a “grafting from” particle growth mechanism was proposed for ILRPP, which is considerably different from the “grafting to” particle growth mechanism in the traditional precipitation polymerization. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

Chromatographic performance of molecularly imprinted polymers: Core‐shell microspheres by precipitation polymerization and grafted MIP films via iniferter‐modified silica beads

In this work, two different surface imprinting formats have been evaluated using thiabendazole (TBZ) as model template. The first format is a thin film of molecularly imprinted polymer (MIP) grafted from preformed silica particles using an immobilized iniferter‐type initiator (inif‐MIP). The second format is molecularly imprinted polymer microspheres with narrow particle size distribution and core‐shell morphology prepared by precipitation polymerization in a two‐step procedure. For the latter format, polymer microspheres (the core particles) were obtained by precipitation polymerization of divinylbenzene‐80 (DVB‐80) in acetonitrile. Thereafter, the core particles were used as seed particles in the synthesis of MIP shells by copolymerization of DVB‐80 and methacrylic acid in the presence of TBZ in a mixed solvent porogen (acetonitrile/toluene). The materials were characterized by elemental microanalysis, nitrogen sorption porosimetry and scanning (and transmission) electron microscopy. Thereafter, the imprinted materials were assessed as stationary phases in liquid chromatography. From this study it can be concluded that grafted MIP beads can be obtained in a simple and direct manner, consuming only a fraction of the reagents used typically to prepare imprinted particles from a monolithic imprinted polymer. Such materials can be used in the development of in‐line molecularly imprinted solid‐phase extraction methods. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1058–1066, 2010     

Preparation of molecularly imprinted polymer microspheres via atom transfer radical precipitation polymerization

The first combined use of atom transfer radical polymerization (ATRP) and precipitation polymerization in the molecular imprinting field is described. The utilized polymerization technique, namely atom transfer radical precipitation polymerization (ATRPP), provides MIP microspheres with obvious molecular imprinting effects towards the template, fast template binding kinetics and an appreciable selectivity over structurally related compounds. The living chain propagation mechanism in ATRPP results in MIP spherical particles with diameters (number‐average diameter D_n ≈ 3 μm) much larger than those prepared via traditional radical precipitation polymerization (TRPP). In addition, the MIP microspheres prepared via ATRPP have also proven to show significantly higher high‐affinity binding site densities on their surfaces than the MIP generated via TRPP, while the binding association constants K_a and apparent maximum numbers N_max of the high‐affinity sites as well as the specific template bindings are almost the same in the two cases. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3257–3270, 2009     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Tetraphenylethane iniferters. II. Toluene diisocyanate-based polyurethane iniferter for “living” radical polymerization of acrylonitrile

A novel polyurethane iniferter, synthesized from equal moles of toluene diisocyanate and 1,1,2,2-tetraphenyl-1,2-ethanediol, was used to polymerize acrylonitrile to assess whether it proceeded via a “living” radical polymerization mechanism. From the kinetic results, the rate of polymerization could be expressed as R_pα[BPT]^0.96[AN]^1.64. The increase of number-average molecular weight with increase of both conversion and polymerization time, the bimodal molecular weight distribution in gel permeation chromatography and the increase of molecular weight in the post-polymerization of polyacrylonitrile confirm that the present tetraphenylethane-based polyurethane iniferter follows a “living” radical polymerization mechanism. © 1996 John Wiley & Sons, Inc.     

Preparation of Thermosensitive Hollow Imprinted Microspheres via Combining Distillation Precipitation Polymerization and Thiol‐ene Click Chemistry

Hollow molecular imprinted polymer microspheres were prepared by distillation precipitation polymerization with (S)‐(+)‐ibuprofen (S‐IBF) as template molecule and acrylamide (AM) as functional monomer. Using the silicon dioxide (SiO₂, 180 nm) modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) as the template microspheres, the molecular imprinted shells were coated on successfully (SiO₂@MIPs). The thermosensitive SiO₂@MIPs‐PNIPAM core‐shell microspheres were subsequently prepared by grafting the PNIPAM chains (M_n=1.21×10⁴ g/mol, polydispersity index=1.30), which were prepared by reversible addition‐fragmentation chain transfer (RAFT) polymerization, on the surface of SiO₂@MIPs microspheres via the thiol‐ene click chemistry. The grafting density of PNIPAM brushes on the SiO₂@MIPs microspheres was about 0.18 chains/nm². After HF etching, the hollow imprinted microspheres were finally obtained. For thermosensitivity analysis, the phase transition temperatures of multifunctional nanoparticles were measured by DSL at 25°C and 45°C respectively, and the sizes of the microspheres changed by about 35 nm. The modified microspheres presented excellent controlled release property to S‐IBF, moreover about half amount of the adsorptions passed into acetonitrile‐water solution through the specific holes of imprinted shell at 25°C under vibration.     

Semi‐Covalent Surface Molecular Imprinting of Polymers by One‐Stage Mini‐emulsion Polymerization: Glucopyranoside as a Model Analyte

This paper describes a new type of surface imprinting technique that combines the advantages of both the semi‐covalent approach and one‐stage miniemulsion polymerization. This process has been successfully applied for the preparation of glucose surface‐imprinted nanoparticles. The selective artificial receptors for glucopyranoside were fully characterized by IR, TEM and BET analyses, and their molecular recognition abilities by binding experiments carried out in batch processes. The molecular affinity and selectivity of the glucose molecularly imprinted polymers were accurately quantified. These characteristics are essential for verification of the efficiency of the developed surface imprinting process. The imprinting effect was clearly demonstrated using the batch rebinding method. We have found that the glucose imprinted polymers produced using the optimized one‐stage mini‐emulsion exhibited quite fast kinetics of binding and equilibration with glucopyranoside templates, compared to polymers prepared by bulk polymerization technique, as well as extremely low levels of unspecific bindings. We also demonstrated that glucose molecular imprinted polymer (MIP) exhibited very good selectivity for its original template compared to other glycopyranoside derivatives, such as galactose. Finally, the extraction of the binding properties from isotherms of binding by fitting to the bi‐Langmuir and Freundlich models allowed the determination of the affinity constant distribution of the binding sites. This imprinting protocol allowed the determination of an affinity constant (K_D), involving exclusively H‐bonding interactions, for the glucose MIP ( P2C ) with the best template 1 , in CH₃CN as the solvent system.

     

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

Preparation of “dummy” l‐phenylalanine molecularly imprinted microspheres by using ionic liquid as a template and functional monomer

In this study, dummy imprinting technology was employed for the preparation of l‐ phenylalanine‐imprinted microspheres. Ionic liquids were utilized as both a “dummy” template and functional monomer, and 4‐vinylpyridine and ethylene glycol dimethacrylate were used as the assistant monomer and cross‐linker, respectively, for preparing a surface‐imprinted polymer on poly(divinylbenzene) microspheres. By the results obtained by theoretical investigation, the interaction between the template and monomer complex was improved as compared with that between the template and the traditional l‐ phenylalanine‐imprinted polymer. The batch experiments indicated that the imprinting factor reached 2.5. Scatchard analysis demonstrated that the obtained “dummy” molecularly imprinted microspheres exhibited an affinity of 77.4 M·10^?4, significantly higher that of a traditional polymer directly prepared by l‐ phenylalanine, which is in agreement with theoretical results. Competitive adsorption experiments also showed that the molecularly imprinted polymer with the dummy template effectively isolated l‐ phenylalanine from l‐ histidine and l‐ tryptophan with separation factors of 5.68 and 2.68, respectively. All these results demonstrated that the polymerizable ionic liquid as the dummy template could enhance the affinity and selectivity of molecularly imprinted polymer, thereby promoting the development of imprinting technology for biomolecules.     

Efficient one‐pot synthesis of water‐compatible and photoresponsive molecularly imprinted polymer nanoparticles by facile RAFT precipitation polymerization

A facile, general, and highly efficient one‐pot approach to obtain azobenzene (azo)‐containing molecularly imprinted polymer (MIP) nanoparticles with photoresponsive template binding and release properties in aqueous media is described, which involves the combined use of hydrophilic macromolecular chain transfer agent‐mediated reversible addition‐fragmentation chain transfer precipitation polymerization and easily available water‐insoluble azo functional monomers. The resulting azo‐containing MIPs were characterized with dynamic laser scattering (DLS), SEM, FTIR, static contact angle and water dispersion studies, and equilibrium binding experiments. They have proven to be nanoparticles (their diameters being around 104–397 nm, as determined by DLS in methanol) with surface‐grafted hydrophilic polymer brushes and exhibit excellent pure water‐compatible template binding properties. Moreover, obvious photoregulated template binding behaviors were observed for such azo‐containing MIP nanoparticles, which led to their largely accelerated template release in the aqueous media under the UV light irradiation. Furthermore, the general applicability of the strategy was also demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1941–1952     

Universal xanthate‐mediated controlled free radical polymerizations of the “less activated” vinyl monomers

The living free radical polymerizations of three “less activated” monomers (LAMs), vinyl acetate, N‐vinylcarbazole, and N‐vinylpyrrolidone, were successfully achieved in the presence of a disulfide, isopropylxanthic disulfide (DIP), using 2,2′‐azoisobutyronitrile (AIBN) as the initiator. The living behaviors of polymerizations of LAMs are evidenced by first‐order kinetic plots and linear increase of molecular weights (M_ns) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions, respectively. The effects of reaction temperatures and molar ratios of components on the polymerization were also investigated in detail. The polymerization proceeded with macromolecular design via interchange of xanthate process, where xanthate formed in situ from reaction of AIBN and DIP. The architectures of the polymers obtained were characterized by GPC, ¹H NMR, UV–vis, and MALDI‐TOF‐MS spectra, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Constituting of a new surface‐initiating system on polymeric microspheres and preparation of basic protein surface‐imprinted material in aqueous solution

In this work, a new surface‐initiating system was constituted on the surfaces of cross‐linked polyvinyl alcohol (CPVA) microspheres, and on this basis, papain surface‐imprinted material was successfully prepared in aqueous solution. CPVA microspheres were modified with chlorethamin as reagent, and so a mass of primary amino group was introduced onto CPVA microspheres. Whereupon, a surface initiating system (−NH₂/S₂O₈²⁻) was formed at the interface between the microspheres and aqueous solution, in which papain as template protein, 4‐styrene sulfonate (SSS) as functional monomer, N,N′‐methylenebisacrylamide (MBA) as cross‐linker and (NH₄)₂S₂O₈ as initiator were all dissolved. In neutral solution, the polypeptide chains of papain as a basic protein were positively charged, and the molecules of anionic monomer SSS would spontaneously gather around papain polypeptide chain, forming complex by right of strong electrostatic interaction. The free radicals produced on CPVA microspheres initiated the monomer SSS around papain polypeptide chain and the cross‐linker MBA to produce graft/cross‐linking polymerization, and at the same time, papain macromolecules were embed in the cross‐linked networks. As a result, the graft/cross‐linking polymerizing of SSS and the molecule imprinting of papain were synchronously carried out, and papain surface‐imprinted material, MIP‐PSSS/CPVA microspheres, was obtained. The experimental results show that the papain surface‐imprinted material has excellent binding affinity and high recognition selectivity for papain. The binding capacity of MIP‐PSSS/CPVA microspheres for papain reaches 44 mg/g, and relative to another basic protein, trypsin (TRY) as contrast protein, the selectivity coefficient of MIP‐PSSS/CPVA microspheres for papain is 14.35, displaying very high recognition specificity.     

Monoaryloxo ytterbium(III) chlorides supported by β‐diketiminato ligands as novel initiators for the living ring‐opening polymerization of ε‐caprolactone

Ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out using β‐diketiminato‐supported monoaryloxo ytterbium chlorides L¹Yb(OAr)Cl(THF) (1) [L¹ = N,N′‐bis(2,6‐dimethylphenyl)‐2,4‐pentanediiminato, OAr = 2,6‐di‐tert‐butylphenoxo‐], and L²Yb(OAr′)Cl(THF) (2) [L² = N,N′‐bis(2,6‐diisopropylphenyl)‐2,4‐pentanediiminato, OAr′ = 2,6‐di‐tert‐butyl‐4‐methylphenoxo‐], respectively, as single‐component initiator. The influence of reaction conditions, such as polymerization temperature, polymerization time, initiator, and initiator concentration, on the monomer conversion, molecular weight, and molecular weight distribution of the resulting polymers was investigated. Complex 1 was well characterized and its crystal structure was determined. Some features and kinetic behaviors of the CL polymerization initiated by these two complexes were studied. The polymerization rate is first order with respect to monomer. The M_n of the polymer increases linearly with the increase of the polymer yield, while polydispersity remained narrow and unchanged throughout the polymerization in a broad range of temperatures from 0 to 50 °C. The results indicated that the present system has a “living character”. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1147–1152, 2006     

Surface‐imprinted microspheres prepared by a template‐oriented method for the chiral separation of amlodipine

The surface imprinting technique has been developed to overcome the mass‐transfer difficulty, but the utilization ratio of template molecules in the imprinting procedure still remains a challengeable task to be improved. In this work, specifically designed surface‐imprinted microspheres were prepared by a template‐oriented method for enantioseparation of amlodipine besylate. Submicron mesoporous silica microspheres were surface‐modified with double bonds, followed by polymerizing methacrylic acid to generate carboxyl modified mesoporous silica microspheres (PMAA@SiO₂). Afterwards, PMAA@SiO₂ was densely adsorbed with (S )‐amlodipine molecules to immobilize template molecules through multiple hydrogen bonding interactions. Then surface molecular imprinting was carried out by cross‐linking the carboxyl group of PMAA@SiO₂ with ethylene glycol diglycidyl ether. The surface‐imprinted microspheres showed fast binding kinetics of only 20 min for equilibrium adsorption, and the saturation adsorption capacity reached 137 mg/g. The imprinted materials displayed appreciable chiral separation ability when used as column chromatography for enantioseparation of amlodipine from amlodipine besylate, and the enantiomeric excess of (S )‐amlodipine reached 13.8% with only 2.3 cm column length by no extra chiral additives. Besides, the imprinted materials exhibited excellent reusability, and this allows the potential application for amplification production of amlodipine enantiomer.     

Metal‐imprinted microsphere prepared by surface template polymerization and its application to chromatography

A metal ion‐imprinted microsphere was prepared by surface molecular template polymerization. Trimethylolpropane trimethacrylate (TRIM), zinc ions, 1,12‐dodecanediol‐O, O′‐diphenyl phosphonic acid (DDDPA) were used as a crosslinking agent, an imprint molecule, and a functional host molecule. The Zn(II)‐imprinted microspheres, which are spherically well‐defined particles, were prepared by using water‐in‐oil‐in‐water (W/O/W) multiple emulsions. The combination of TRIM and DDDPA serves to align the recognition sites resulting in better template sites produced on the polymer surface. We firstly conducted diagnostic zinc‐ and copper‐ion adsorption tests with the Zn(II)‐imprinted and unimprinted microspheres in order to make an assessment on the effectiveness of the molecular imprinting technique. Further, the metal‐imprinted microspheres were applied to the column operation. The separation and recovery of metals were carried out by an adsorption column packed with the Zn(II)‐imprinted microspheres. This performance was compared to that of commercial chelating resins that possess similar phosphoric functional groups. The Zn(II)‐imprinted polymer shows an extremely high selectivity to the imprinted zinc ions compared to that of the commercial chelating resin. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 689–696, 2000     

Direct through anionic,cationic, and radical active species: Terminal carbon–halogen bond for “controlled”/living polymerizations of styrene

In this work, we examined the synthesis of novel block (co)polymers by mechanistic transformation through anionic, cationic, and radical living polymerizations using terminal carbon–halogen bond as the dormant species. First, the direct halogenation of growing species in the living anionic polymerization of styrene was examined with CCl₄ to form a carbon–halogen terminal, which can be employed as the dormant species for either living cationic or radical polymerization. The mechanistic transformation was then performed from living anionic polymerization into living cationic or radical polymerization using the obtained polymers as the macroinitiator with the SnCl₄/n‐Bu₄NCl or RuCp^*Cl(PPh₃)/Et₃N initiating system, respectively. Finally, the combination of all the polymerizations allowed the synthesis block copolymers including unprecedented gradient block copolymers composed of styrene and p‐methylstyrene. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 465–473     

Facile “Living” Radical Polymerization of Methyl Methacrylate in the Presence of Iniferter Agents: Homogeneous and Highly Efficient Catalysis from Copper(II) Acetate

A facile homogeneous polymerization system involving the iniferter agent 1‐cyano‐1‐methylethyl diethyldithiocarbamate (MANDC) and copper(II) acetate (Cu(OAc)₂) is successfully developed in bulk using methyl methacylate (MMA) as a model monomer. The detailed polymerization kinetics with different molar ratios (e.g., [MMA]₀/[MANDC]₀/[Cu(OAc)₂]₀ = 500/1/x (x = 0.1, 0.2, 0.5, 1.0)) demonstrate that this system has the typical “living”/controlled features of “living” radical polymerization, even with ppm level catalyst Cu(OAc)₂, first order polymerization kinetics, a linear increase in molecular weight with monomer conversion and narrow molecular weight distributions for the resultant PMMA. ¹H NMR spectra and chain‐extension experiments further confirm the “living” characteristics of this process. A plausible mechanism is discussed.

     

Preparation and Adsorption Ability of Molecularly Imprinted Polymer Microspheres for Malachite Green

Molecularly imprinted polymer (MIP) microspheres were synthesized through precipitation polymerization using malachite green (MG) as template, methacrylic acid (MAA) as monomer, and trimethylolpropane trimethacrylate (TRIM) as cross-linker. The microsphere structure of MIP was characterized by IR spectroscopy and SEM. The influence of preparation conditions such as monomer and cross-linker dosages on the polymer absorption of MG in acetonitrile solution was also explored. Under the optimum synthesis conditions (0.25 mmol MG, 1.5 mmol MAA, 2.5 mmol TRIM, 40 mL acetonitrile), the prepared MIP microspheres have a binding capacity as high as 2000 µg g^?1 of MG with an imprinting factor of above 4.0. The result suggests that the prepared MIP microspheres are promising material for the selective extraction of MG in complicated matrix solutions.