New Nitriminotetrazoles – Synthesis,Structures and Characterization

The reactions of 5‐nitriminotetrazole ( 4 ) with 1‐methyl‐5‐aminotetrazole ( 2 ) as well as 2‐methyl‐5‐aminotetrazole ( 3 ) were investigated. In the first reaction 2 was protonated yielding 1‐methyl‐5‐aminotetrazolium 5‐nitrimino‐1H‐tetrazolate monohydrate ( 7 ). In the latter case no protonation could be observed and a co‐crystallization of 5‐nitraminotetrazole and 2‐methyl‐5‐aminotetrazole was obtained. In this compound a new tautomer of 4 could be found. Both products were determined by low temperature single crystal X‐ray diffraction, IR, Raman and multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analysis as well as differential scanning calorimetry. In addition the heats of formation were calculated using experimentally obtained heats of combustion. With these and the X‐ray densities several detonation parameter were computed using the EXPLO5 software. In addition the sensitivities towards impact, friction and electrostatic discharge were determined. Further, two crystal structures of the important starting materials in energetic research 5‐nitriminotetrazole monohydrate ( 4 ·H₂O) and 1‐methyl‐5‐nitriminotetrazolemonohydrate ( 5 ·H₂O) are presented and compared with the water‐free compounds. The heats of formation of 4 , 4 ·H₂O, 5 , 5 ·H₂O have been calculated by the atomization method using the CBS basis set. Inclusion of crystal water decrease heats of formation about 265 kJ mol^?1. Also the influence of crystal water on sensitivities (impact, friction, electrostatic discharge) but also performance is discussed.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.     

Hydroxylammonium 5‐Nitriminotetrazolates

The hydroxylammonium salts of monodeprotonated 5‐nitriminotetrazole ( 4 ), double deprotonated 5‐nitriminotetrazole ( 5 ), 1‐methyl‐5‐nitriminotetrazole ( 6 ), and 2‐methyl‐5‐nitraminotetrazole ( 7 ) have been prepared in high yield from the corresponding 5‐nitriminotetrazoles as free acids and an aqueous solution of hydroxylamine or the metathesis reactions of hydroxylammonium hydrochloride with the silver salt of the corresponding nitriminotetrazole, respectively. The energetic salts 4 – 7 were fully characterized by single‐crystal X‐ray diffraction ( 4 – 6 ), NMR spectroscopy, IR‐ and Raman spectroscopy as well as DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, several detonation parameters (e.g. heat of explosion, detonation velocity) were computed by the EXPLO5.04 computer code based on calculated (CBS‐4M) heats of formation and X‐ray densities.     

Hydrazinium Nitriminotetrazolates

Hydrazinium 5‐nitrimino‐1H‐tetrazolate ( 1 ) and dihydrazinium nitriminotetrazolate monohydrate ( 2 ) were synthesized by the reaction of hydrazine with 5‐nitriminotetrazole. The energetic compounds 1 and 2 were characterized by single‐crystal X‐ray diffraction (only 2 ), NMR spectroscopy, IR‐ and Raman spectroscopy as well as DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, several detonation parameters (e.g. heat of explosion, detonation velocity) were computed by the EXPLO5 computer code based on calculated (CBS‐4M) heats of formation and X‐ray densities.     

Strontium Nitriminotetrazolates – Suitable Colorants in Smokeless Pyrotechnic Compositions

The new compounds strontium 5‐nitriminotetrazolate dihydrate ( 1 ), strontium bis(1‐hydro‐5‐nitriminotetrazolate) tetrahydrate ( 2 ), strontium bis(1‐methyl‐5‐nitriminotetrazolate) monohydrate ( 3 ) and strontium bis(2‐methyl‐5‐nitraminotetrazolate)·x H₂O (x = 2–4) ( 4 ) were synthesized by the reactions of strontium hydroxide octahydrate and 5‐nitriminotetrazole ( 5 ), 1‐methyl‐5‐nitriminotetrazole ( 6 ) and 2‐methyl‐5‐nitraminotetrazole ( 7 ), respectively. The compounds were characterized using multinuclear NMR spectroscopy, vibrational (IR and Raman) spectroscopy, elemental analysis and differential scanning calorimetry. The solid state structures of 1 , 2 , 3 and 4 were determined using low temperature X‐ray diffraction. In addition, the sensitivities (impact, friction, electrical discharge) of 1 – 4 were investigated and their use as red colorants in pyrotechnic compositions was tested.     

New Energetic Polynitrotetrazoles

This combined experimental, theoretical and comparative study details the syntheses and chemical characterisation of two new energetic polynitromethyl tetrazole derivatives, namely, 2‐(2‐nitro‐2‐azapropyl)‐5‐(trinitromethyl)‐2 H‐tetrazole and its fluorine‐containing analogue 2‐(2‐nitro‐2‐azapropyl)‐5‐(fluorodinitromethyl)‐2 H‐tetrazole. Their crystal structures and energetic behaviour are compared to those of their starting materials, the ammonium salts of the corresponding 5‐(polynitromethyl)‐2 H‐tetrazoles. Additionally, the crystal structures of two further related polynitrotetrazoles are presented.     

The Chemistry of 5‐(Tetrazol‐1‐yl)‐2H‐tetrazole: An Extensive Study of Structural and Energetic Properties

5‐(Tetrazol‐1‐yl)‐2H‐tetrazole ( 1 ), or 1,5′‐bistetrazole, was synthesized by the cyclization of 5‐amino‐1H‐tetrazole, sodium azide and triethyl orthoformate in glacial acetic acid. A derivative of 1 , 2‐methyl‐5‐(tetrazol‐1‐yl)tetrazole ( 2 ) can be obtained by this method starting from 5‐amino‐2‐methyl‐tetrazole. Furthermore, selected salts of 1 with nitrogen‐rich and metal (alkali and transition metal) cations, including hydroxylammonium ( 4 ), triaminoguanidinium ( 5 ), copper(I) ( 8 ) and silver ( 9 ), as well as copper(II) complexes of both 1 and 2 were prepared. An intensive characterization of the compounds is given, including vibrational (IR, Raman) and multinuclear NMR spectroscopy, mass spectrometry, DSC and single‐crystal X‐ray diffraction. Their sensitivities towards physical stimuli (impact, friction, electrostatic) were determined according to Bundesamt für Materialforschung (BAM) standard methods. Energetic performance (detonation velocity, pressure, etc.) parameters were calculated with the EXPLO5 program, based on predicted heats of formation derived from enthalpies computed at the CBS‐4M level of theory and utilizing the atomization energy method. From the analytical and calculated data, their potential as energetic materials in different applications was evaluated and discussed.     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

The Effectivity of 1H‐Triazoles and ‐Tetrazoles as Activators in Acid‐Catalyzed Phosphoramidite Alcoholysis

The efficiency of 5‐nitro‐1,2,4‐1H‐triazole ( 3 ), 5‐(methylthio)‐1H‐tetrazole ( 4 ), and 5‐(4‐nitrophenyl)‐1H‐tetrazole ( 5 ) as activators in phosphoramidite alcoholysis has been studied relative to 1H‐tetrazole ( 6 ). Reactions of these azoles with diisopropyl (diisopropylamido)phosphite ( 1a ) were followed in THF, and the rates were found to increase with increasing acidity of the azoles. The Brønsted α value of 0.7 determined for this dependence is in agreement with data published earlier.     

A Study of 5‐(1,2,4‐Triazol‐C‐yl)tetrazol‐1‐ols: Combining the Benefits of Different Heterocycles for the Design of Energetic Materials

The synthesis and full structural and spectroscopic characterization of three 5‐(1,2,4‐triazol‐C‐yl)tetrazol‐1‐ol compounds with selected energetic moieties including nitrimino ( 5 ), nitro ( 6 ) and azido ( 7 ) groups are reported. The influence of those energetic moieties as well as the C? C connection of a tetrazol‐1‐ol and a 1,2,4‐triazole on structural and energetic properties has been investigated. All compounds were well characterized by various means, including IR and multinuclear NMR spectroscopy, mass spectrometry, and DSC. The molecular structures of 5 – 8 were determined in the solid state by single‐crystal X‐ray diffraction. The standard heats of formation were calculated on the CBS‐4M level of theory utilizing the atomization energy method, revealing highly positive values for all compounds. The detonation parameters were calculated with the EXPLO5 program and compared to the common secondary explosive RDX. Additionally, sensitivities towards impact, friction and electrostatic discharge were determined.     

Bis(5‐aminotetrazole‐1‐acetato‐κO)tetraaquacobalt(II) and catena‐poly[[cadmium(II)]‐bis(μ‐5‐aminotetrazole‐1‐acetato‐κ3N4:O,O′)]

The Co^II atom in bis(5‐aminotetrazole‐1‐acetato)tetraaquacobalt(II), [Co(C₃H₄N₅O₂)₂(H₂O)₄], (I), is octahedrally coordinated by six O atoms from two 5‐aminotetrazole‐1‐acetate (atza) ligands and four water molecules. The molecule has a crystallographic centre of symmetry located at the Co^II atom. The molecules of (I) are interlinked by hydrogen‐bond interactions, forming a two‐dimensional supramolecular network structure in the ac plane. The Cd^II atom in catena‐poly[[cadmium(II)]‐bis(μ‐5‐aminotetrazole‐1‐acetato], [Cd(C₃H₄N₅O₂)₂]_n, (II), lies on a twofold axis and is coordinated by two N atoms and four O atoms from four atza ligands to form a distorted octahedral coordination environment. The Cd^II centres are connected through tridentate atza bridging ligands to form a two‐dimensional layered structure extending along the ab plane, which is further linked into a three‐dimensional structure through hydrogen‐bond interactions.     

pH‐Directed Synthesis of Two Luminescent Zinc(II) Coordination Compounds based on 5‐Aminotetrazole‐1‐propanoic Acid

Two Zn^II‐tetrazole‐carboxylate coordination compounds are reported, mononuclear [Zn(atzpa)₂(H₂O)₄] · 2H₂O ( 1 ) and one‐dimensional [Zn(atzpa)₂(H₂O)₂]_n ( 2 ), derived from 5‐aminotetrazole‐1‐propanoic acid (Hatzpa). The structures of both compounds are determined by the pH value of the reaction system. The luminescence properties of Hatzpa and the compounds were investigated at room temperature in the solid state. Furthermore, differential scanning calorimetry (DSC) and thermogravimetric‐differential thermogravimetric (TG‐DTG) analyses were applied to evaluate the thermal decomposition behavior of such compounds. The relevant thermodynamic parameters (ΔH, ΔS, and ΔG) of the decompostion process of compound 1 were calculated, as well.     

Synthesis of Amino,Azido, Nitro,and Nitrogen‐Rich Azole‐Substituted Derivatives of 1H‐Benzotriazole for High‐Energy Materials Applications

The amino, azido, nitro, and nitrogen‐rich azole substituted derivatives of 1H‐benzotriazole have been synthesized for energetic material applications. The synthesized compounds were fully characterized by ¹H and ¹³C NMR spectroscopy, IR, MS, and elemental analysis. 5‐Chloro‐4‐nitro‐1H‐benzo[1,2,3]triazole ( 2 ) and 5‐azido‐4,6‐dinitro‐1H‐benzo[1,2,3]triazole ( 7 ) crystallize in the Pca2₁ (orthorhombic) and P2₁/c (monoclinic) space group, respectively, as determined by single‐crystal X‐ray diffraction. Their densities are 1.71 and 1.77 g cm^?3, respectively. The calculated densities of the other compounds range between 1.61 and 1.98 g cm^?3. The detonation velocity (D) values calculated for these synthesized compounds range from 5.45 to 8.06 km s^?1, and the detonation pressure (P) ranges from 12.35 to 28 GPa.     

In situ synthesis of mononuclear copper(II) complexes of the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine

Two mononuclear copper complexes, {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}(3,5‐dimethyl‐1H‐pyrazole‐κN²)(perchlorato‐κO)copper(II) perchlorate, [Cu(ClO₄)(C₅H₈N₂)(C₁₂H₁₉N₅)]ClO₄, (I), and {bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl‐κN²)methyl]amine‐κN}bis(3,5‐dimethyl‐1H‐pyrazole‐κN²)copper(II) bis(hexafluoridophosphate), [Cu(C₅H₈N₂)₂(C₁₂H₁₉N₅)](PF₆)₂, (II), have been synthesized by the reactions of different copper salts with the tripodal ligand tris[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (TDPA) in acetone–water solutions at room temperature. Single‐crystal X‐ray diffraction analysis revealed that they contain the new tridentate ligand bis[(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)methyl]amine (BDPA), which cannot be obtained by normal organic reactions and has thus been captured in the solid state by in situ synthesis. The coordination of the Cu^II ion is distorted square pyramidal in (I) and distorted trigonal bipyramidal in (II). The new in situ generated tridentate BDPA ligand can act as a meridional or facial ligand during the process of coordination. The crystal structures of these two compounds are stabilized by classical hydrogen bonding as well as intricate nonclassical hydrogen‐bond interactions.     

Nitrogen‐Rich Energetic Dianionic Salts of 3, 4‐Bis(1H‐5‐­tetrazolyl)furoxan with Excellent Thermal Stability

Nitrogen‐rich 3, 4‐bis(1H‐tetrazol‐5‐yl)furoxan (H₂BTF, 2 ) and its energetic salts with excellent thermal stability were successfully synthesized and fully characterized by ¹H, and ¹³C NMR, and IR spectroscopy, differential scanning calorimetry (DSC), and elemental analyses. Additionally, the structures of barium ( 3 ) and 1‐methyl‐3, 4, 5‐triamino‐triazolium ( 10 ) salts were confirmed by single‐crystal X‐ray diffraction. The densities of the energetic salts paired with organic cations range between 1.56 and 1.85 g · cm^–3 as measured by a gas pycnometer. Based on the measured densities and calculated heats of formation, the detonation pressures and velocities are calculated to be in the range 23.4–32.0 GPa and 7939–8915 m · s^–1, which make them competitive energetic materials.     

Abnormal reactions of 2‐methoxy‐4,9‐dimethyl‐1‐nitroacridine with selenous acid and selenium(IV) oxide. Synthesis of 1H‐selenopheno[2,3,4‐k,l]acridine‐1‐one: A new seleno‐containing ring system

Unusual course of the reaction was revealed on the oxidation of functionally substituted acridine containing the activated methyl groups by well‐known oxidants, such as selenous acid and selenium(IV) oxide. Treatment of 2‐methoxy‐4,9‐dimethyl‐1‐nitroacridine ( 5 ) with an excess of H₂SeO₃ in boiling ethanol gave a mixture of the normal reaction products, 2‐methoxy‐4‐methyl‐1‐nitro‐9‐formylacridine ( 11 ) (isolated yield 29%) and 2‐methoxy‐4‐methyl‐1‐nitroacridine‐9‐carboxylic acid ( 12 ) (36%), together with an abnormal product, 3‐methoxy‐5‐methyl‐1H‐selenopheno[2,3,4‐k,l]acridine‐1‐one ( 13 ) (21%), which is the first example of a new seleno‐containing ring system. With the use of SeO₂ the yield of selenolactone 13 was much lower. J. Heterocyclic Chem., 2011.     

Synthesis and Characteristics of Bis(2, 2‐dinitroethyl‐N‐nitro)ethylenediamine‐Based Energetic Salts

New energetic bis(2, 2‐dinitroethyl‐N‐nitro)ethylenediamine‐based salts exhibiting moderate physical properties, good detonation properties, and relatively low impact sensitivities were synthesized in high yield by direct reactions of bis(2, 2‐dinitroethyl‐N‐nitro)ethylenediamine with organic bases. The resulting salts were fully characterized by multinuclear NMR spectroscopy (¹H and ¹³C), vibrational spectroscopy (IR), differential scanning calorimetry (DSC), and elemental analysis. Solid‐state ¹⁵N NMR spectroscopy was used as an effective technique to further determine the structure of some products. Thermal decomposition kinetics and several thermodynamic parameters of some salts were obtained under non‐isothermal conditions by DSC. The densities of the energetic salts paired with organic cations were in the range 1.60–1.89 g · cm^–3 as measured with a gas pycnometer. Based on the measured densities and calculated heats of formation, detonation pressures and velocities were calculated using Explo 5.05 and found to be 23.6–44.8 GPa and 7790–9583 m · s^–1, respectively, which make them potentially useful as energetic materials.     

Synthesis and Characterization of the New Heterocycle 5‐(4‐Amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole and Some Ionic Nitrogen‐Rich Derivatives

A new heterocycle consisting of a tetrazole ring attached to an amino‐triazolone ring, namely 5‐(4‐amino‐1,2,4‐triazol‐3‐on‐5′‐yl)‐1H‐tetrazole ( 3 ) as well as its ammonium ( 2 ), hydroxylammonium ( 3 ), and sodium salt ( 4 ), is introduced. Its ammonium salt ( 2 ) is formed starting from tetrazole‐5‐carboxamide oxime ( 1 ), which is reacted with diaminourea (carbonyldihydrazide) in aqueous media. All compounds 2 , 3 , 4 , 5 were structurally characterized by single crystal X‐ray diffraction. The thermal behavior was investigated using differential scanning calorimetry, and the sensitivities towards impact, friction, and electrostatic discharge were determined. Furthermore, several detonation parameters were calculated with the program EXPLO5 to determine the potential use of these compounds as highly energetic materials.     

Über Umlagerungen bei der Cyclialkylierung von Arylpentanolen zu 2,3‐Dihydro‐1H‐inden‐Derivaten, 3. Mitteilung

On Rearrangements by Cyclialkylations of Arylpentanols to 2,3‐Dihydro‐1 H ‐indene Derivatives. Part 3. The Acid‐Catalyzed Cyclialkylation of 3,4‐Dimethyl‐ and 3‐([ ² H ₃ ]Methyl)‐4‐methyl‐3‐phenylpentan‐2‐ol The cyclialkylation of 2‐([²H₃]methyl)‐4‐methyl‐4‐phenyl[1,1,1‐²H₃]pentan‐3‐ol ( 4 ) yielded a 1 : 1 mixture of 1,1‐di([²H₃]methyl)‐2,3‐dimethyl‐1H‐indene ( 5 ) and of 2,3‐dihydro‐2,3‐di([²H₃]methyl)‐1,1‐dimethyl‐1H‐indene ( 6 ) (Scheme 1) [1]. However, it was not clear whether the transposition takes place through the successive migration of a Ph, a Me and again the Ph group (Scheme 2, Path A: shift IV → VII → VIIa ) or through Ph‐, Me‐, and then i‐Pr‐group (Scheme 2, Path B: IV → VII → VIIb ). The cyclialkylation of 3‐([²H₃]methyl)‐4‐methyl‐3‐phenylpentan‐2‐ol ( 7 ) yielded only one product, the 2,3‐dihydro‐2‐([²H₃]methyl)‐1,1,3‐trimethyl‐1H‐indene ( 8 ), in accordance with the migrations according to Path A. This result is also a support for the total mechanism proposed for the cyclialkylation of 4 (Scheme 2). The transition of a tertiary to a secondary carbenium ion is not definitely ensured (see [1]).