Conformational analysis of 3‐methyl‐3‐silathiane and 3‐fluoro‐3‐methyl‐3‐silathiane

The conformational equilibria of 3‐methyl‐3‐silathiane 5 , 3‐fluoro‐3‐methyl‐3‐silathiane 6 and 1‐fluoro‐1‐methyl‐1‐silacyclohexane 7 have been studied using low temperature ¹³C NMR spectroscopy and theoretical calculations. The conformer ratio at 103 K was measured to be about 5 _ax: 5 _eq = 15:85, 6 _ax: 6 _eq = 50:50 and 7 _ax: 7 _eq = 25:75. The equatorial preference of the methyl group in 5 (0.35 kcal mol^?1) is much less than in 3‐methylthiane 9 (1.40 kcal mol^?1) but somewhat greater than in 1‐methyl‐1‐silacyclohexane 1 (0.23 kcal mol^?1). Compounds 5–7 have low barriers to ring inversion: 5.65 (ax → eq) and 6.0 (eq → ax) kcal mol^?1 ( 5 ), 4.6 ( 6 ), 5.1 (Me_ax → Me_eq) and 5.4 (Me_eq → Me_ax) kcal mol^?1 ( 7 ). Steric effects cannot explain the observed conformational preferences, like equal population of the two conformers of 6 , or different conformer ratio for 5 and 7 . Actually, by employing the NBO analysis, in particular, considering the second order perturbation energies, vicinal stereoelectronic interactions between the Si–X and adjacent C–H, C–S, and C–C bonds proved responsible. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational analysis of 4,4‐dimethyl‐4‐silathiane and its S‐oxides

4,4‐Dimethyl‐4‐silathiane and its S‐oxides [n = 0 ( 1 ), 1 ( 2 ), 2 ( 3 )] were studied experimentally by variable temperature dynamic NMR spectroscopy down to 103 K and the frozen ring inversion was revealed for all three compounds. The barriers for the degenerate ring inversion in 1 and 3 were measured to be 4.8 and 5.0 kcal/mol at the coalescence temperatures of 111 and 116 K, respectively, and practically coincide with the calculated barriers of 4.60 kcal/mol in 1 and 4.46 kcal/mol in 3 . The frozen equilibrium mixture 2‐ax/2‐eq contains 37% of the 2‐ax and 63% of the 2‐eq conformer. The ring inversion barrier proved to be ca. 4.8 kcal/mol. Calculations at the B3LYP/6‐311+G(d,p) level of theory showed the 2‐ax conformer to be 0.90 kcal/mol more stable than the 2‐eq conformer in the gas phase whereas in solution the relative stability of the conformers calculated using the PCM model at the same level of theory is inverted to become 0.19 (in CHCl₃) or 0.36 kcal/mol (in DMSO) in favor of the 2‐eq conformer. The chair–chair interconversion mechanism of sulfoxide 2 includes two intermediate energetically equivalent 1,4‐twist forms and the 2,5‐boat transition state: 2‐ax (chair) ? 2 (1,4‐twist) ? [ 2 (2,5‐boat)]^≠ ? 2 (1,4‐twist) ? 2‐eq (chair). The calculated ring inversion barriers are 5.1 ( 2‐ax → 2‐eq ) and 4.2 kcal/mol ( 2‐eq → 2‐ax ) in the gas phase, and 4.03 and 4.22 kcal/mol, respectively, in chloroform. Copyright © 2011 John Wiley & Sons, Ltd.     

Unusual conformational preferences of 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine

The conformational analysis of the first representative of the Si‐alkoxy substituted six‐membered Si,N‐heterocycles, 1,3‐dimethyl‐3‐isopropoxy‐3‐silapiperidine, was performed by low‐temperature ¹H and ¹³C NMR spectroscopy and DFT theoretical calculations. In contrast to the expectations from the conformational energies of methyl and alkoxy substituents, the Me_axi‐PrO_eq conformer was found to predominate in the conformational equilibrium in the ratio Me_axi‐PrO_eq : Me_eqi‐PrO_ax of ca. 2 : 1 as from the ¹H and ¹³C NMR study. The thermodynamic parameters obtained by the complete line shape analysis showed that the main contribution to the barrier to ring inversion originates from the entropy term of the free energy of activation. Copyright © 2012 John Wiley & Sons, Ltd.     

Conformational analysis of N‐phenyl‐ and N‐trifyl‐4,4‐dimethyl‐4‐silathiane 1‐sulfimides

N‐Substituted 4,4‐dimethyl‐4‐silathiane 1‐sulfimides [R = Ph ( 1 ), CF₃ ( 2 )] were studied experimentally by variable temperature dynamic NMR spectroscopy. Low temperature ¹³C NMR spectra of the two compounds revealed the frozen ring inversion process and approximately equal content of the axial and equatorial conformers. Calculations of the 4‐silathiane derivatives 1 , 2 and the model compound [R = Me ( 3 )] as well as their carbon analogs, the similarly N‐substituted thiane 1‐sulfimides [R = Ph ( 4 ), CF₃ ( 5 ), Me ( 6 )] at the DFT/B3LYP/6–311G(d,p) level in the gas phase and in chloroform solution using the PCM model at the same level of theory showed a strong dependence of the relative stability of the conformer on the solvent. The electronegative trifluoromethyl group increases the relative stability of the axial conformer. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational analysis of 4,4‐dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane

4,4‐Dimethyl‐1‐(trifluoromethylsulfonyl)‐1,4‐azasilinane 1 and 2,2,6,6‐tetramethyl‐4‐(trifluoromethylsulfonyl)‐1,4,2,6‐oxazadisilinane 2 were studied by variable temperature dynamic ¹H, ¹³C, ¹⁹F NMR spectroscopy and theoretical calculations at the DFT (density functional theory) and MP2 (Møller‐Plesset 2) levels of theory. Both kinetic (barriers to ring inversion) and thermodynamic data (frozen conformational equilibria) could be obtained for the two compounds. The computations revealed two minima on the potential energy surface for molecules 1 and 2 corresponding to the rotamers with the CF₃SO₂ group directed ‘inward’ and ‘outward’ the ring, the latter being 0.2–0.4 kcal/mol (for 1 ) and 1.1 kcal/mol (for 2 ) more stable than the former. The vibrational calculations at the DFT and MP2 levels of theory give the values of the free energy difference ΔG^o for the ‘inward’ ‘outward’ equilibrium consistent with those determined from the experimentally measured ratio of the rotamers. The structure of crystalline compound 2 was ascertained by X‐ray diffraction analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

4‐Alkyl‐2,2,6,6‐tetramethyl‐1,4,2,6‐oxaazadisilinanes: synthesis,structure, and conformational analysis

4‐Alkyl‐2,2,6,6‐tetramethyl‐1,4,2,6‐oxaazadisilinanes RN[CH₂Si(Me)₂]₂O [R = Me ( 1 ), i‐Pr ( 2 )] were synthesized by two methods which provided good yields up to 84%. Low temperature NMR study of compounds ( 1 ) and ( 2 ) revealed a frozen ring inversion with the energy barriers of 8.5 and 7.7 kcal/mol at 163 and 143 K, respectively, which is substantially lower than that for their carbon analog, N‐methylmorpholine. DFT calculations performed on the example of molecule ( 1 ) showed that N? Me_ax conformer to exist in the sofa conformation with the coplanar fragment C? Si? O? Si? C, and its N? Me_eq conformer in a flattened chair conformation. Copyright © 2009 John Wiley & Sons, Ltd.     

Complete basis set,hybrid‐DFT study and NBO interpretations of conformational behaviors of trans‐2,3‐ and trans‐2,5‐dihalo‐1,4‐dithianes

The conformational behaviors of trans‐2,3‐dihalo‐1,4‐dithiane [halo = F ( 1 ), Cl ( 2 ), Br ( 3 )] and trans‐2,5‐dihalo‐1,4‐dithiane [halo = F ( 4 ), Cl ( 5 ), Br ( 6 )] have been analyzed by means of complete basis set CBS‐4, hybrid‐density functional theory (B3LYP/6‐311 + G**//B3LYP/6‐311 + G**) based methods, and natural bond orbital (NBO) interpretation. Both methods showed that the axial conformations of compounds 1–5 are more stable than their equatorial conformations but CBS‐4 resulted in an equatorial preference for compound 6 . The Gibbs free energy difference (G_eq?G_ax) values (i.e., ΔG_eq–ax) at 298.15 K and 1 atm between the axial and equatorial conformations decrease from compound 1 to compound 2 but increase from compound 2 to compound 3 . Also, the calculated ΔG_eq–ax values decrease from compound 4 to compound 6 . The NBO analysis of donor–acceptor (LP → σ*) interactions showed that the anomeric effect (AE) increase from compound 1 to compound 3 and also from compound 4 to compound 6 . On the other hand, the calculated dipole moment values between the axial and equatorial conformations [Δ(µ_eq?µ_ax)] decrease from compound 1 to compound 3 . The conflict between the increase of AE and the decrease of Δ(µ_eq?µ_ax) values could explain the variation of the calculated ΔG_eq–ax for compounds 1–3 . The Gibbs free energy difference values between the axial and equatorial conformations (i.e., ΔG_ax–ax and ΔG_eq–eq) of compounds 1 and 4 , 2 and 5 and also 3 and 6 have been calculated. The correlations between the AE, bond orders, pairwise steric exchange energies (PSEE), ΔG_eq–ax, ΔG_ax–ax, ΔG_eq–eq, dipole–dipole interactions, structural parameters, and conformational behaviors of compounds 1–6 have been investigated. Copyright © 2010 John Wiley & Sons, Ltd.     

Proton transfer reactions of hydrazine‐boranes

Hydrazine‐borane and hydrazine‐diborane contain, respectively, 15.4 and 16.9 wt% of hydrogen and are potential materials for hydrogen storage. In this work we present the gas‐phase complexation energies, acidities, and basicities of hydrazine‐borane and hydrazine‐bisborane calculated at MP2/6‐311 + G(d,p) level. We also report the release of dihydrogen from both protonated complexes (ΔG_{hydrazine‐borane} = ?20.9 kcal/mol and ΔG_{hydrazine‐bisborane} = ?27.2 kcal/mol) which is much more exergonic than from analogues amine‐boranes. The addition of the first BH₃ to the hydrazine releases 17.1 kcal/mol, and the second addition releases 15.8 kcal/mol. The attachment of BH₃ also increases the N―H acidity of hydrazine by 46.3 kcal/mol. It was found that the B―H deprotonation leads to intramolecular rearrangement. The basicity values for hydrazine‐borane and ‐bisborane are 180 and 172.8 kcal/mol, respectively. For both complexes the protonation centres are located at the boron moiety. The protonated structure of hydrazine‐bisborane is cyclic and can be described as H₂ captured between a negatively charged B―H hydrogen and positive boron (B―H??H2??B). Atoms in molecules analysis are used to investigate bond paths in concerning structures. Copyright © 2015 John Wiley & Sons, Ltd.     

Breathing viability into cyclonona‐3,5,7‐trienylidenes via α‐dimethyl and ά‐moieties at DFT

Cyclonona‐3,5,7‐trienylidene ( 1 ) changes from being a transition state (TS) to minimum states when substituted by α‐methyl groups and ?‐X, where X = CMe₂, NMe, PMe, O, S, cyclopropyl, and SiMe₂ ( 2 , 3 , 4 , 5 , 6 , 7 , 8 , respectively) at density functional theory. Specifically, the parent carbene 1 exhibits a negative vibrational force constant and proves to be an unreachable electrophilic TS while shows C_s symmetry with an NBO atomic charge of +0.70 on its carbenic center. It has a triplet ground state with a rather small singlet‐triplet energy gap (ΔE_s–t = ?4.1 kcal/mol). In contrast, all of its seven scrutinized derivatives enjoy reachable global minima, with C₁ symmetry, desired nucleophilicity, and singlet closed shell (S_cs) ground states (for all but 8 which remains triplet). Stability is indicated by relative ΔE_s–t values: 2 > 3 > 4 > 5 > 6 > 7 > 1 > 8 . The highest ΔE_s–t as well as NBO carbenic atomic negative charge (?0.74) are displayed by 2 . Our carbenes ( 2 , 3 , 4 , 5 , 6 , 7 ) appear more nucleophilic than the synthesized N‐heterocyclic carbenes (imidazol‐2‐ylidenes). Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of α‐cyclopropyl on heterocyclic carbenes stability at DFT

α‐Cyclopropyl stability impacts on singlet and triplet heterocyclic carbenes with acyclic, cyclic, and cyclic‐unsaturated structures are compared and contrasted to di‐t‐butyl as well as t‐butylcyclopropylcarbenes through appropriate isodesmic reactions at B3LYP/AUG‐cc‐pVTZ level. Substitution of one of the t‐butyl groups of di‐t‐butylcarbene with a cyclopropyl alters the ground state multiplicity from triplet to singlet with a singlet–triplet energy separation (ΔE_s–t) of 7.2 kcal/mol. Additional heteroatom substitution increases ΔE_s–t values for the resulting α‐heteroatom cyclopropylcarbenes in the following order: amino > oxy > thio > phophino. α‐Cyclopropyl group stabilizes singlet states of all our carbenes two to three times more than their corresponding triplet states. The ΔE_s–t values of all the carbenes are increased through cyclization, while the introduction of unsaturation in the rings causes small and rather random changes. To probe the kinetic stability of the species, we calculated the transition states for the opening of cyclopropyl through 1,2‐C shift. Interestingly, the 4.1 kcal/mol energy barrier in cyclopropylcarbene is significantly increased in the presence of heteroatoms to 31.2 kcal/mol for aminocyclopropylcarbene. The reactivity of the species is discussed in terms of nucleophilicity and electrophilicity issues showing our carbenes, especially acyclic ones, more nucleophilic than the common N‐heterocyclic carbenes. Copyright © 2010 John Wiley & Sons, Ltd.     

Dynamic 1H NMR investigation along with a theoretical study around the C–C and C = C bonds in a particular phosphorus ylide

In the present work, the dynamic ¹H NMR effects were investigated at variable temperatures within a particular phosphorus ylide involving a 2‐benzoxazolinone around the carbon–carbon single bond and also partial carbon–carbon double bond in two Z‐ and E‐rotational isomers. Activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were determined in accord with the dynamic ¹H NMR data for three rotational processes. In addition, theoretical studies based upon rotation around the same bonds were investigated using ab initio and DFT methods at the HF/6‐31G(d,p) and B3LYP/6‐31G(d,p) levels of theory. Theoretical activation and kinetic parameters including ΔH^≠, ΔG^≠, ΔS^≠ and E_a were calculated at 298 K and experimental temperatures for five rotational processes. These results (experimental and theoretical), taken together, indicate that the rotational energy barrier around the C = C double bond was considerably high and the observation of the two rotational isomers was impossible (seen as a single isomer) at the high temperatures, in this case rotation around the C = C bond was too fast on the NMR time scale. When the temperature was relatively low, the rate of rotation was sufficiently slow; therefore, observation of the two Z‐ and E‐isomers was possible. In addition, calculations at the HF/6‐31G(d,p) level of theory showed very favorable results in agreement with the experimental data on rotation around the C = C bond. While, B3LYP level using the 6‐31G(d,p) basis set was provided the reasonable data for the restricted rotations around the C–C and C–N single bond. Copyright © 2012 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Calculated polar substituent effects on the stability of 4‐substituted(X) ‐ cub‐1‐yl and ‐bicyclo[2.2.2]oct‐1‐yl cations: a DFT study

The effects of substituents on the stability of 4‐substituted(X) cub‐1‐yl cations ( 2 ), as well as the benchmark 4‐substituted(X) bicyclo[2.2.2]oct‐1‐yl cation systems ( 7 ), for a set of substituents (X = H, NO₂, CN, NC, CF₃, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) level of theory. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 2 / 7 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values of both systems are best described by a combination of both substituent constants. This highlights the distinction between through‐space and through‐bond electronic influences characterized by σ_F and σ_χ, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

Substituent effects on cyclonona‐3,5,7‐trienylidenes: a quest for stable carbenes at density functional theory level

Nine boat‐shaped cyclonona‐3,5,7‐trienylidenes are compared and contrasted with respect to their multiplicity, nucleophilicity, electrophilicity, band gap (ΔE_{HOMO ? LUMO}), Natural bond orbital (NBO) atomic charge, force constant, as well as the aptitude for dimerization, and rearrangement through proper isodesmic reactions at B3LYP/AUG‐cc‐pVTZ and B3LYP/6‐311++G**//B3LYP/6‐31+G* levels of theory. The nine cyclic carbenes include unsubstituted (1_CH2) plus eight α‐cyclopropylcyclonona‐3,5,7‐trienylidenes, which are substituted with ?‐SiMe₂, ?‐NMe, ?‐PMe, ?‐O, ?‐S, ?‐CH₂, ?‐cyclopropyl, and ?‐CMe₂ (2_SiMe2, 2_NMe, 2_PMe, 2_O, 2_S, 2_CH2, 2_cyclopropyl, and 2_CMe2, respectively). The latter eight species enjoy the stabilizing interaction of the occupied Walsh orbital of cyclopropyl with the vacant p_π orbital of the carbene center (Walsh_cyclopropyl → p_{π carbene}). Among them, the singlet closed shell 2_NMe appears the most promising for exhibiting the highest relative singlet–triplet energy gap (ΔE_{s ? t} = 27.1 kcal mol^?1). In contrast, the least stable derivative is triplet 2_SiMe2, which exhibits the lowest relative ΔE_{s ? t} of ?5.5 kcal mol^?1. The overall trend of ΔE_s‐t is 2_NMe > 2_PMe > 2_S > 2_O > 2_cyclopropyl > 2_CMe2 > 2_CH2 > 1_CH2 > 2_SiMe2. With one negative force constant, the unsubstituted 1_CH2 turns out to be a transition state, whereas the rest emerge as minima. Copyright © 2015 John Wiley & Sons, Ltd.     

Substituent effect investigation of 3‐(2, 4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one. Part 1. Correlation analysis of 13C NMR chemical shifts

A series of substituted chlorinated chalcones namely, 3‐(2,4‐dichlorophenyl)‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one, have been synthesized, X being H, NH₂, OMe, Me, F, Cl, CO₂Et, CN, and NO₂. Dual substituent parameter (DSP) models of ¹³C NMR chemical shift (CS) have revealed that π‐polarization concept could be utilized to explain the reverse field effect at CO, the enhanced substituent field effect at CO, C‐2, and C‐5, and the decreased sensitivity of substituent field effect at C‐6. Chlorine atoms dipole direction at the benzylidene ring either enhances or reduces substituent effect depending on how they couple with the substituent dipole at the probe site. The correlation of ¹³C NMR CS of C‐2, C‐5, and C‐6 with σ and σ indicates that chlorine atoms in the benzylidine ring deplete the ring from charges. Both MSP of Hammett and DSP of Taft ¹³C NMR CS models give similar trends of substituent effects at C‐2, C‐5, and C‐6. However, the former fail to give a significant correlation for CO and C‐6 ¹³C NMR CS. MSP of σ_q and DSP of Taft and Reynolds models significantly correlated ¹³C NMR CS of C_β. MSP of σ_q fails to correlate C‐1′ ¹³C NMR CS. Investigation of ¹³C NMR CS of non‐chlorinated chalcones series: 3‐phenyl‐1‐(4′‐X‐phenyl)‐2‐propen‐1‐one has revealed similar trends of substituent effects as in the chlorinated chalcones series for C‐1′, CO, C_α, and C_β. In contrast, the substituent effect of the non‐chlorinated chalcone series at C‐2, C‐5, and C‐6 did not correlate with any substituent constant. Copyright © 2010 John Wiley & Sons, Ltd.     

Palladium‐catalyzed cyclization of 2‐alkynyl‐N‐ethanoyl anilines to indoles: synthesis,structural, spectroscopic,and mechanistic study

This study reports a facial regio‐selective synthesis of 2‐alkyl‐N‐ethanoyl indoles from substituted‐N‐ethanoyl anilines employing palladium (II) chloride, which acts as a cyclization catalyst. The mechanistic trait of palladium‐based cyclization is also explored by employing density functional theory. In a two‐step mechanism, the palladium, which attaches to the ethylene carbons, promotes the proton transfer and cyclization. The gas‐phase barrier height of the first transition state is 37 kcal/mol, indicating the rate‐determining step of this reaction. Incorporating acetonitrile through the solvation model on density solvation model reduces the barrier height to 31 kcal/mol. In the presence of solvent, the electron‐releasing (–CH₃) group has a greater influence on the reduction of the barrier height compared with the electron‐withdrawing group (–Cl). These results further confirm that solvent plays an important role on palladium‐catalyzed proton transfer and cyclization. For unveiling structural, spectroscopic, and photophysical properties, experimental and computational studies are also performed. Thermodynamic analysis discloses that these reactions are exothermic. The highest occupied molecular orbital?lowest unoccupied molecular orbital gap (4.9–5.0 eV) confirms that these compounds are more chemically reactive than indole. The calculated UV–Vis spectra by time‐dependent density functional theory exhibit strong peaks at 290, 246, and 232 nm, in good agreement with the experimental results. Moreover, experimental and computed ¹H and ¹³C NMR chemical shifts of the indole derivatives are well correlated. Copyright © 2015 John Wiley & Sons, Ltd.     

Trends in properties of para‐substituted 3‐(phenylhydrazo)pentane‐2,4‐diones

Trends between the Hammett's σ_p and related normal , inductive σ_I, resonance σ_R, negative and positive polar conjugation and Taft's σ_p° substituent constants and the distance, δ_{N? H} NMR chemical shift, oxidation potential (E_p/2°x, measured in this study by cyclic voltammetry (CV)) and thermodynamic parameters (pK, ΔG⁰, ΔH⁰ and ΔS⁰) of the dissociation process of unsubstituted 3‐(phenylhydrazo)pentane‐2,4‐dione (HL₁) and its para‐substituted chloro (HL₂), carboxy (HL₃), fluoro (HL₄) and nitro (HL₅) derivatives were recognized. The best fits were found for σ_p and/or in the cases of , δ_{N? H} and E_p/2°x, showing the importance of resonance and conjugation effects in such properties, whereas for the above thermodynamic properties the inductive effects (σ_I) are dominant. HL₂ exists in the hydrazo form in DMSO solution and in the solid state and contains an intramolecular H‐bond with the distance of 2.588(3) Å. It was also established that the dissociation process of HL_1–5 is non‐spontaneous, endothermic and entropically unfavourable, and that the increase in the inductive effect (σ_I) of para‐substitutents (? H < ? Cl < ? COOH < ? F < ? NO₂) leads to the corresponding growth of the distance and decrease of the pK and of the changes of Gibbs free energy, of enthalpy and of entropy for the HL_1–5 acid dissociation process. The electrochemical behaviour of HL_1–5 was interpreted using theoretical calculations at the DFT/HF hybrid level, namely in terms of HOMO and LUMO compositions, and of reactivities induced by anodic and cathodic electron‐transfers. Copyright © 2010 John Wiley & Sons, Ltd.     

Conformational flexibility of xanthene‐based covalently linked dimers

The conformational flexibility of three covalently linked dimers consisting of two xanthene‐based moieties connected by a diphenyl ether linker was studied using NMR spectroscopy, X‐ray crystallography, and density functional theory (DFT) calculations. The three dimers interconvert as a function of pH: the doubly cationic dimer (Xan⁺)₂ exists in acidic solutions (pH < 0.5), the mono‐alcohol monocation Xan⁺–Xan‐OH at intermediate pH values (pH = 1–3), and the neutral diol at the highest pH‐values (pH > 3). Each dimer exhibits conformational degrees of freedom associated with rotations of either the xanthene moiety or of the diphenyl ether (DPE) linker. The barriers for rotation of the xanthylium moiety were evaluated using DFT calculations, yielding values of 23 kcal/mol for (Xan⁺)₂ and 11 kcal/mol for (Xan‐OH)₂, respectively. The rotational barrier for the diphenyl ether linker in Xan⁺–Xan‐OH (15 kcal/mol) was experimentally determined using variable temperature NMR measurements. The relative orientation of the two –OH groups in (Xan‐OH)₂ diol was investigated in solution and the solid state using NMR spectroscopy and X‐ray crystallography. The conformer observed in the solid state was found to be the In–Out conformer, while free rotation of the xanthenol units is thought to occur on the NMR timescale at room temperature. These studies are relevant for the design of linkers for efficient water oxidation catalysts. Copyright © 2016 John Wiley & Sons, Ltd.     

Calculated polar substituent effects on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations: a DFT study

The effects of substituents on the stability of 3‐substituted(X) bicyclo[1.1.1]pent‐1‐yl cations (3) and 4‐substituted(X) bicyclo[2.2.1]hept‐1‐yl cations (4), for a set of substituents (X = H, NO₂, CN, NC, CF₃, CHO, COOH , F, Cl, HO, NH₂, CH₃, SiH₃, Si(CH₃)₃, Li, O^?, and NH₃⁺) covering a wide range of electronic substituent effects were calculated using the DFT theoretical model at the B3LYP/6‐311 + G(2d,p) and B3LYP/6‐31 + G (d) levels of theory, respectively. Linear regression analysis was employed to explore the relationship between the calculated relative hydride affinities (ΔE, kcal/mol) of the appropriate isodesmic reactions for 3/4 and polar field/group electronegativity substituent constants (σ_F and σ_χ, respectively). The analysis reveals that the ΔE values for both systems are best described by a combination of both substituent constants. The result highlights the importance of the σ_χ dependency of charge delocalization in these systems. Copyright © 2012 John Wiley & Sons, Ltd.     

Reactivity of sodium arenesulfinates in the substitution reaction to γ‐functionalized allyl bromides

The kinetics of nucleophilic bimolecular substitution reactions of γ‐functionalized allyl bromides with non‐substituted and p‐substituted sodium arenesulfinates has been studied. Both the structure of allyl bromides and nucleophilicity of arenesulfinate ions exerted a significant effect on the values of the kinetic parameters such as the second‐order rate constants k, activation energy E_A, and changes in the entropy ΔS^≠, enthalpy ΔH^≠, and free energy ΔG^≠ of the formation of the activated complex from reactants. Based on the evaluation of kinetic parameters, the reactants could be arranged, according to their decreasing reactivity in the S_N2‐reactions as follows: p‐toluenesulfinate ion > benzenesulfinate ion > p‐chlorobenzenesulfinate ion and 4‐bromo‐2‐butenenitrile > 1,3‐ dibromopropene, respectively. Comparison was also made between the kinetic data obtained and some delocalization reactivity indexes for both the substrates and nucleophiles. The enthalpy–entropy compensation effect was observed for the reactions of sodium arenesulfinates with γ‐functionalized allyl bromides. Copyright © 2009 John Wiley & Sons, Ltd.