Preparation and characterization of epoxy/polyhedral oligomeric silsesquioxane hybrid nanocomposites

We have prepared epoxy/polyhedral oligomeric silsesquioxane (POSS) nanocomposites by photopolymerization from octakis(glycidylsiloxy)octasilsesquioxane (OG) and diglycidyl ether of bisphenol A. We used nuclear magnetic resonance, Raman, and Fourier transform infrared spectroscopies to characterize the chemical structure of the synthetic OG. Differential scanning calorimetry and dynamic mechanical analysis (DMA) revealed that the nanocomposites possessed higher glass transition temperatures than that of the pristine epoxy resin. Furthermore, DMA indicated that all of the nanocomposites exhibited enhanced storage moduli in the rubbery state, a phenomenon that we ascribe to both the nano‐reinforcement effect of the POSS cages and the additional degree of crosslinking that resulted from the reactions between the epoxy and OG units. Thermogravimetric analysis revealed that the thermal stability of the nanocomposites was better than that of the pristine epoxy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1927–1934, 2009     

Pyrolysis and fire behaviour of epoxy resin composites based on a phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS)

The pyrolysis and fire behaviour of epoxy resin (EP) composites based on a novel polyhedral oligomeric silsesquioxane containing 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO-POSS) and diglycidyl ether of bisphenol A (DGEBA) have been investigated. The pre-reaction between the hydroxyl groups of DOPO-POSS and the epoxy groups of DGEBA at 140 °C is confirmed by FTIR, which means that DOPO-POSS molecules of hydroxyl group could easily disperse into the epoxy resin at the molecular level. The EP composites with the DOPO-POSS were prepared through a curing agent, m-phenylenediamine (m-PDA). The morphologies of the EP composites observed by SEM indicate that DOPO-POSS disperses with nano-scale particles in the EP networks, which implies good compatibility between them. The thermal properties and pyrolysis of the EP composites were analyzed by DSC and TGA, TGA-FTIR, and TGA-MS. The analysis indicates that the DOPO-POSS change the decomposition pathways of the epoxy resin and increase its residue at high temperature; moreover, the release of phosphorous products in the gas phase and the existence of Si-O and P-O structures in the residue Is noted. The fire behaviour of the EP composites was evaluated by cone calorimeter (CONE). The CONE tests show that incorporation of DOPO-POSS into epoxy resin can significantly improve the flame retardancy of EP composites. SEM and XPS were used to explore micro-structures and chemical components of the char from CONE tests of the EP composites, they support the view that DOPO-POSS makes the char strong with the involvement of Si-O and P-O structures.     

Study on thermal degradation and combustion behaviors of PC/POSS hybrids

Polycarbonate/polyhedral oligomeric silsesquioxane hybrids were prepared based on bisphenol A polycarbonate (PC) and trisilanolphenyl-POSS (TPOSS) by the melt blending method. Investigation of transmission electronic microscopy and Fourier transform infrared spectroscopy confirms that the nanoscale TPOSS particles were well dispersed in the PC matrix and there is no chemical reaction between the TPOSS particles and PC matrix during the melt blending. The thermal degradation behaviors of the PC/TPOSS hybrids were investigated. The presence of TPOSS significantly affects the thermal degradation process of PC. The combustion behaviors of the hybrids were evaluated by cone calorimetry experiments. The addition of TPOSS significantly decreased the value of peak heat release rate of the hybrids. Moreover, the addition of TPOSS at 2 wt% leads to the maximum decrease of the PHRR. And scanning electron microscopy and X-ray photoelectron spectroscopy were used to explore the char residues of the pure PC and the hybrids.     

Preparation,flame retardancy,and thermal degradation of epoxy thermosets modified with phosphorous/nitrogen‐containing glycidyl derivative

Phosphorus/nitrogen‐containing advanced epoxy resins were obtained by chain‐extension of the diglycidyl ether of bisphenol‐A epoxy (DGEBA) resin with phosphorus‐modified triglycidyl isocyanurate (TGICP). The structure of TGICP was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). Differential scanning calorimetry revealed that the EP/TGICP composites possessed higher glass transition temperatures than that of phosphorus free EP. The thermal stability and flame retardant properties of the epoxy resin/TGICP systems were investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), and vertical burning test (UL‐94) test. When the TGICP content was 10 wt%, the LOI value of epoxy resin system was as high as 35.0% and it can obtain the V‐0 grade in UL‐94 protocol. From microscale combustion calorimetry (MCC) measurement, it was found that the addition of TGICP reduced the value of peak heat release rate and total heat release. The thermal degradation process of EP and EP/TGICP composite was monitored by real time FTIR. Moreover, scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS) were used to explore the morphology and chemical components of the char residues. Copyright © 2010 John Wiley & Sons, Ltd.     

Thermal and flame retardant properties of epoxy resin cured by a novel phosphorus-containing 4,4′-bisphenol novolac curing agent

A novel flame retardant curing agent for epoxy resin (EP), i.e., a DOPO (9,10-dihydro-9-oxa-10-phosphaphenan-threne-10-oxide)-containing 4,4'-bisphenol novolac (BIP-DOPO) was synthesized and characterized by Fourier transform infrared (FTIR), ¹H NMR, ³¹P NMR spectroscopy, and gel permeation chromatography. The epoxy resin cured by BIP-DOPO itself or its mixture with a commonly used bisphenol A-formaldehyde novolac resin (NPEH720) was prepared. The flame retardancy of the cured EP thermosets were studied by limiting oxygen index (LOI), UL 94 and cone calorimeter test (CCT), and the thermal properties by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results show that the cured epoxy resin EPNP/BI/3/1, which contains 2.2% phosphorus, possesses a value of 26.2% and achieves the UL 94 V-0 rating. The data from cone calorimeter test demonstrated that the peak release rate, average heat release rate, total heat release decline sharply for the flame retarded epoxy resins, compared with those of pure ones. DSC results show that the glass-transition temperatures of cured epoxy resins decrease with increasing phosphorus content. TGA indicates that the incorporation of BIP-DOPO promotes the decomposition of epoxy resin matrix ahead of time and leads to higher char yield. The surface morphological structures of the char residues reveal that the introduction of BIP-DOPO benefits to the formation of a continuous and solid char layer on the epoxy resin material surface during combustion.     

Thermal and dynamic mechanical properties of epoxy resin/poly(urethane‐imide)/polyhedral oligomeric silsesquioxane nanocomposites

Linear isocyanate‐terminated poly(urethane‐imide) (PUI) with combination of the advantages of polyurethane and polyimide was directly synthesized by the reaction between polyurethane prepolymer and pyromellitic dianhydride (PMDA). Then octaaminophenyl polyhedral oligomeric silsesquioxane (OapPOSS) and PUI were incorporated into the epoxy resin (EP) to prepare a series of EP/PUI/POSS organic–inorganic nanocomposites for the purpose of simultaneously improving the heat resistance and toughness of the epoxy resin. Their thermal degradation behavior, dynamic mechanical properties, and morphology were studied with thermal gravimetric analysis (TGA), dynamic mechanical analysis (DMA), and transmission electron microscope (TEM). The results showed that the thermal stability and mechanical modulus was greatly improved with the addition of PUI and POSS. Moreover, the EP/PUI/POSS nanocomposites had lower glass transition temperatures. The TEM results revealed that POSS molecules could self assemble into strip domain which could switch to uniform dispersion with increasing the content of POSS. All the results could be ascribed to synergistic effect of PUI and POSS on the epoxy resin matrix. Copyright © 2010 John Wiley & Sons, Ltd.     

Phenolic resin/polyhedral oligomeric silsesquioxane (POSS) composites: Mechanical,ablative, thermal,and flame retardant properties

Three different polyhedral oligomeric silsesquioxanes (POSS), trisilanolphenyl polyhedral oligomeric silsesquioxane (T‐POSS), octaaminophenyl polyhedral oligomeric silsesquioxanes (OAPS), and octaphenyl polyhedral oligomeric silsesquioxanes (OPS) were incorporated into phenolic resin (PR), respectively; PR/POSS composites were successfully prepared, and the properties of PR/POSS composites were studied. The limiting oxygen index (LOI), cone calorimeter, and thermal gravimetric analysis (TGA) were used for the estimation of flame retardancy and thermal stability. Oxyacetylene flame test and flexural strength test were used to study the ablative and mechanical properties of the PR/POSS composites. The results indicated that T‐POSS was more effective in improving the flame retardancy of PR than OAPS or OPS. Meanwhile, compared with pure PR, the second line ablation rates of PR/4% T‐POSS, PR/4% OAPS, and PR/4% OPS were significantly reduced by 53.3%, 61.9%, and 40.0%, respectively. In addition, the thermal stability and flexural strength of PR/4% T‐POSS were significantly higher than that of all other PR composites.     

Thermo-oxygen degradation mechanisms of POSS/epoxy nanocomposites

A series of polyhedral oligomeric silsesquioxane/epoxy nanocomposites (POSS/EP) containing 0 wt%, 5 wt%, 10 wt% and 15 wt% content of POSS were prepared. Mechanical properties were used as the index to show the effect of POSS on the thermo-oxygen degradation resistance of epoxy resin. And the thermo-oxygen degradation mechanism was investigated by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). Results showed that the incorporation of POSS into epoxy networks enhanced the thermo-oxygen resistance of epoxy. POSS led to the formation of inert layer on the surface of materials which could protect the internal structure from decomposition. As a result, the retention of mechanical properties of EP/POSS hybrids increased with the POSS content increasing.     

A combination of POSS and polyphosphazene for reducing fire hazards of epoxy resin

Extensive application of epoxy resins (EPs) is highly limited by their intrinsic flammability. Combining EPs with nanoparticles and phosphorus‐nitrogen flame retardants is an effective approach to overcome the drawback. In this work, simultaneous incorporation of octa‐aminophenyl polyhedral oligomeric silsesquioxanes (OapPOSS) and polyphosphazene into EP was reported for the first time. Significantly, reduced peak of heat release rate and UL‐94 V‐0 rating were achieved by tuning suitable ratios of polyphosphazene and OapPOSS for EP composites. During combustion, polyphosphazene promoted char formation and released nonflammable gases such as CO₂, NH₃, and N₂ to dilute oxygen concentration and cool pyrolysis zone. Moreover, numerous phosphorus‐containing species acting as free radical scavengers were generated during degradation. Silicon dioxide evolving from OapPOSS protected char residues from thermal degradation. This study provides a novel method to fabricate high‐performance flame‐retardant EP composites, which have potential applications in the field of electrics and electronics.     

Flame retardancy of epoxy resin nanocomposite with a novel polymeric nanoflame retardant

A wrapped nanoflame retardant, designated as polyhedral oligomeric silsesquioxane (POSS)‐poly(4‐bromostyrene) (PBS)‐carbon nanotubes (CNTs), was synthesized via π‐π stacking interactions between the walls of multiwalled carbon nanotubes and the silicon‐bromine containing hybrid copolymer (designated as POSS‐PBS) that was copolymerized by 4‐bromostyrene and acryloyloxyisobutyl polyhedral oligomeric silsesquioxane. The POSS‐PBS‐CNTs exhibited good dispersibility in epoxy resin (EP) without obvious aggregation. Furthermore, the fire behaviors of this flame‐retardant EP (FR‐EP) nanocomposites were examined via limited oxygen index (LOI) and cone calorimeter (CONE) tests. The FR‐EP had an ideal LOI value of 35.3% and its residual char yield obtained from CONE test was significantly enhanced from 5.9% to 15.3% with the incorporation of 4 wt% POSS‐PBS‐CNTs and 1.33 wt% Sb₂O₃ into EP matrix. Additionally, the addition of 4 wt% POSS‐PBS‐CNTs or POSS‐PBS can efficiently decrease the peak heat release rate (PHRR) of EP matrix by 41.0% or 45.6%, respectively.     

Preparation and thermomechanical properties of epoxy resins modified by octafunctional cubic silsesquioxane epoxides

The thermomechanical properties of octafunctional cubic silsesquioxane‐modified epoxy resins associated with dicycloaliphatic hardener (4,4′‐dimethyldiaminodicyclo hexyl methane) were studied using thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. The structures of epoxy resin containing cubic silsesquioxane epoxides were characterized by Fourier transform infrared spectroscopy and wide‐angle X‐ray scattering techniques. In this work, octa(dimethylsiloxybutylepoxide) octasilsesquioxane (OB), and octa(glycidyldimethyl‐siloxyepoxide) octasilsesquioxane (OG), were synthesized and used as additives to improve the properties of a commercial epoxy resin by exploring the effects of varying the ratio of OB or OG. The commercial Ciba epoxy resin (Araldite LY5210/HY2954) was used as a standard. It was found, by thermogravimetric analysis and dynamic mechanical analysis, that the highest thermal stability was observed at N = 0.5 (N = number of amine groups/number of epoxy rings). No glass transition temperature was observed by adding 20 mol % OB to the Ciba epoxy resin, indicating the reduction of chain motion in the presence of octafunctional cubic silsesquioxane epoxide. The storage modulus of the OB‐modified epoxy resin also increased, especially at higher temperatures, compared with the Ciba epoxy resin under identical curing conditions. Fourier transform infrared data elucidated the preservation of cubic silsesquioxane structure after curing at high temperature. In contrast, the OG/Araldite LY5210/HY2954 systems gave poorer thermomechanical properties. The low viscosity of OB at room temperature (～ 350 cPs) makes it suitable for composite processing and, when used in conjunction with the Ciba epoxy, lowers the viscosity of this system as well. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3490–3503, 2004     

倍半硅氧烷改性环氧树脂的研究进展

倍半硅氧烷是近年发展起来的一种分子水平的有机无机杂化材料。文章介绍了倍半硅氧烷的结构、合成以及笼型倍半硅氧烷（POSS）基高分子复合材料的结构及合成方法。倍半硅氧烷改性聚合物可以提高聚合物的热性能、阻燃性能和物理机械性能等。文章综述了倍半硅氧烷改性环氧树脂的研究进展。     

Co-flame retarding effect of ethanolamine modified titanium-containing polyhedral oligomeric silsesquioxanes in epoxy resin

A metal-doped organic and inorganic hybrid polyhedral oligomeric silsesquioxanes (POSS) with a titanium atom in the POSS cage and an ethanolamine substitute group in the corner, namely MEA-Ti-POSS, was synthesized through simple condensation reaction and substitute reaction. It was blended with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) to form a kind of blending-type flame retardant system for the modification of epoxy resins. The thermal stability, flame retardancy and mechanical properties of cured epoxy resin composites were studied. Comparing with pure epoxy resin, the LOI value of EP/MEA-Ti-POSS/DOPO composites was raised from 25.2% to 32.7%, and the UL-94 grade reached V-0 level at a loading of the mixture of 5% MEA-Ti-POSS and 5% DOPO. In addition, the cone calorimetry results showed that the heat release rate, total heat release and total smoke production as well as smoke production rate were all reduced during the combustion of EP/MEA-Ti-POSS/DOPO composites. The residual char analysis revealed that carbon residues of EP/MEA-Ti-POSS/DOPO composite served as a physical protective layer to insulate the oxygen and combustible gases to reduce the ablation of the matrix. It was concluded that the mixture of MEA-Ti-POSS and DOPO not only effectively raised the thermal stability and flame retardancy of epoxy composited materials, but also improved their mechanical properties, which expanded a promising application of the metal-POSS derivatives as non-halogen additives in the flame retardant polymers.     

Miscibility,specific interactions,and self‐assembly behavior of phenolic/polyhedral oligomeric silsesquioxane hybrids

The miscibility of a phenolic resin with polyhedral oligomeric silsesquioxane (POSS) hybrids and the specific interactions between them were investigated with Fourier transform infrared (FTIR) spectroscopy and wide‐angle X‐ray diffraction (WAXD). An analysis of the morphology and microstructure was performed with polarized optical microscopy and atomic force microscopy (AFM). The interassociation equilibrium constant between the phenolic resin and POSS (38.7) was lower than the self‐association equilibrium constant of pure phenolic (52.3) according to the Painter–Coleman association model. This result indicated that POSS was partially miscible with the phenolic resin. A polarized optical microscopy image of a phenolic/POSS hybrid material (20 wt % POSS) indicated that the crystals of POSS were arranged evenly in the phenolic matrix; the self‐assembled array of POSS crystals was also confirmed by AFM. This phenomenon was consistent with the FTIR spectroscopy and WAXD analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1127–1136, 2004     

Flame‐retardant performance and mechanism of epoxy thermosets modified with a novel reactive flame retardant containing phosphorus,nitrogen, and sulfur

A novel phosphorus‐containing, nitrogen‐containing, and sulfur‐containing reactive flame retardant (BPD) was successfully synthesized by 1‐pot reaction. The intrinsic flame‐retardant epoxy resins were prepared by blending different content of BPD with diglycidyl ether of bisphenol‐A (DGEBA). Thermal stability, flame‐retardant properties, and combustion behaviors of EP/BPD thermosets were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), limited oxygen index (LOI) measurement, UL94 vertical burning test, and cone calorimeter test. The flame‐retardant mechanism of BPD was studied by TGA/infrared spectrometry (TGA‐FTIR), pyrolysis‐gas chromatography/mass spectrometry (Py‐GC/MS), morphology, and chemical component analysis of the char residues. The results demonstrated that EP/BPD thermosets not only exhibited outstanding flame retardancy but also kept high glass transition temperature. EP/BPD‐1.0 thermoset achieved LOI value of 39.1% and UL94 V‐0 rating. In comparison to pure epoxy thermoset, the average of heat release rate (av‐HRR), total heat release (THR), and total smoke release (TSR) of EP/BPD‐1.0 thermoset were decreased by 35.8%, 36.5% and 16.5%, respectively. Although the phosphorus content of EP/BPD‐0.75 thermoset was lower than that of EP/DOPO thermoset, EP/BPD‐0.75 thermoset exhibited better flame retardancy than EP/DOPO thermoset. The significant improvement of flame retardancy of EP/BPD thermosets was ascribed to the blocking effect of phosphorus‐rich intumescent char in condensed phase, and the quenching and diluting effects of abundant phosphorus‐containing free radicals and nitrogen/sulfur‐containing inert gases in gaseous phase. There was flame‐retardant synergism between phosphorus, nitrogen, and sulfur of BPD.     

Synthesis of a novel phosphorus‐containing curing agent and its effects on the flame retardancy,thermal degradation and moisture resistance of epoxy resins

A novel phosphorus‐containing compound diphenyl‐(1, 2‐dicarboxylethyl)‐phosphine oxide defined as DPDCEPO was synthesized and used as a flame retardant curing agent for epoxy resins (EP). The chemical structure of the prepared DPDCEPO was well characterized by Fourier transform infrared spectroscopy, and ¹H, ¹³C and ³¹P nuclear magnetic resonance. The DPDCEPO was mixed with curing agent of phthalic anhydride (PA) with various weight ratios into epoxy resins to prepare flame retardant EP thermosets. The flame retardant properties, combustion behavior and thermal analysis of the EP thermosets were respectively investigated by limiting oxygen index (LOI), vertical burning tests (UL‐94), cone calorimeter measurement, dynamic mechanical thermal analysis and thermogravimetric analysis (TGA) tests. The surface morphologies and chemical compositions of the char residues for EP thermosets were respectively investigated by scanning electron microscopy and X‐ray photoelectron spectroscopy (XPS). The water resistant properties of the cured EP were evaluated by putting the samples into distilled water at 70°C for 168 hr. The results revealed that the EP/20 wt% DPDCEPO/80 wt% PA thermosets successfully passed UL‐94 V‐0 flammability rating and the LOI value was as high as 33.2%. The cone test results revealed that the incorporation of DPDCEPO effectively reduced the combustion parameters of the epoxy resin thermosets, such as heat release rate and total heat release. The dynamic mechanical thermal analysis test demonstrated that the glass transition temperature (Tg) decreased with the increase of DPDCEPO content. The TGA results indicated that the incorporation of DPDCEPO promoted the decomposition of epoxy resin matrix ahead of time and led to a higher char yield and thermal stability at high temperatures. The surface morphological structures and analysis of the XPS of the char residues of EP thermosets revealed that the introduction of DPDCEPO benefited the formation of a sufficient, compact and homogeneous char layer with rich flame retardant elements on the epoxy resin material surface during combustion. The mechanical properties and water resistance of the cured epoxy resins were also measured. After water resistance tests, the EP/20 wt% DPDCEPO/80 wt% PA thermosets retained excellent flame retardancy, and the moisture adsorption of the EP thermosets decreased with the increase of DPDCEPO content in EP thermosets because of the existence of the P–C bonds and the rigid aromatic hydrophobic structure in DPDCEPO. Copyright © 2015 John Wiley & Sons, Ltd.     

Poly(ethylene imine) hybrids containing polyhedral oligomeric silsesquioxanes: Preparation, structure and properties

Both octaglycidyletherpropyl polyhedral oligomeric silsesquioxane and hepta(3,3,3-trifluoropropyl)glycidyletherpropyl polyhedral oligomeric silsesquioxane were synthesized via the hydrosilylation reactions between octahydrosilsesquioxane [and/or hepta(3,3,3-trifluoropropyl)hydrosilsesquioxane] and allyl glycidyl ether. The polyhedral oligomeric silsesquioxane (POSS) macromers were characterized by means of Fourier transform infrared and nuclear magnetic resonance spectroscopy. The inter-component macromolecular reactions between the POSS macromers and poly(ethylene imine) (PEI) were employed to prepare the POSS-containing organic-inorganic PEI hybrids. The inclusion of octaglycidyletherpropyl POSS into PEI results in the formation of the organic-inorganic hybrid networks whereas the introducing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS to PEI affords the linear POSS-grafted PEI copolymers. Differential scanning calorimetry and thermogravimetric analysis show that the POSS-containing PEI hybrids displayed increased glass transition temperatures (T_g’s) and enhanced thermal stability compared to the plain PEI. These PEI hybrid composites can be significantly swollen with water without dissolving, suggesting the formation of hydrogels. The PEI hydrogels containing octaglycidyletherpropyl POSS is in reality the chemically-crosslinked hydrogels whereas the those containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS displayed the behavior of physical hydrogels. The formation of physical hydrogels is ascribed to the microphase-separated morphology in the hybrids. In addition, the hybrids containing hepta(3,3,3-trifluoropropyl)glycidyletherpropyl POSS exhibited the typical amphiphilicity as evidenced by the increase in surface hydrophobilicity.     

Synthesis and properties of low‐dielectric‐constant polyimides with introduced reactive fluorine polyhedral oligomeric silsesquioxanes

A high‐performance, low‐dielectric‐constant polyimide (PI) nanocomposite from poly(amic acid) (PAA) cured with a reactive fluorine polyhedral oligomeric silsesquioxane (POSS) isomer was successfully synthesized. The features of this reactive fluorine POSS isomer [octakis(dimethylsiloxyhexafluoropropylglycidyl ether)silsesquioxane (OFG)] provided two important approaches (containing fluorine or being porous in the polymer matrix) of reducing the dielectric constant of PI. This reactive POSS isomer had an average of four epoxy groups and four fluorine groups on the POSS cage, and the epoxy groups could be cured with PAA to form a network framework of a PI/POSS nanocomposite. The PI/OFG nanocomposite had a high crosslinking density, high porosity (24.3%), high hydrophobicity, and low polarizability. These properties enhanced the thermal (glass‐transition temperature ～ 362 °C) and dielectric (dielectric constant ～2.30) properties of PI more than other POSS derivatives introduced into the PI backbone. A large number of small POSS particles (<10 nm) were embedded inside the PI matrix when the OFG content was low, whereas interconnected POSS aggregation domains were observed when the OFG content was high. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5391–5402, 2006     

Effect of homologous nano-composites on the thermal degradation of the silicone resin

Effect of homologous of nano-composites on the thermal degradation of the silicone resin was researched based on graphene oxide (GO)/polyhedral oligomeric silsesquioxane (POSS). First, the amino-POSS was grafted onto the GO surface (GO/POSS) via the amide bond. Second, GO/POSS was incorporated into the silicone with active epoxy group via chemistry grafting. The reaction kinetics of the thermal decomposition of the epoxy–silicone resin based on nano-composite homologous effect is developed. The initial decomposition temperature of the modified silicone resin is improved by 77.2°C. At high temperatures, GO/POSS-modified silicone molecular end forms homologous nano-structures, which can restrain silicone future degradation. The developed strategy has potential to restrain the degradation of the polymer molecular chain.     

八乙烯基多面体低聚倍半硅氧烷-N-异丙基丙烯酰胺共聚物有机-无机杂化水凝胶的合成与表征

以N-异丙基丙烯酰胺(NIPAM)和八乙烯基笼形低聚倍半硅氧烷(OVPOSS)为单体,通过溶液自由基共聚合成了一系列P(OVPOSS-co-NIPAM)有机-无机杂化水凝胶.采用傅立叶红外光谱(FTIR)、扫描电镜(SEM)、X-射线衍射(XRD)、示差扫描量热仪(DSC)、热重分析仪(TGA)和动态粘弹谱仪(DMA)对其结构与性能进行了研究.结果表明可以通过控制投料比来调节P(OVPOSS-co-NIPAM)杂化水凝胶中POSS的实际含量;P(OVPOSS-co-NIPAM)杂化水凝胶的微观形貌为孔洞结构,随POSS含量的增加,孔径逐渐减小;所合成的P(OVPOSS-co-NIPAM)杂化水凝胶均具有温敏性,随着POSS含量的增加,其最低临界溶解温度(LCST)由33.0℃降低至30.0℃,均低于常规水凝胶(33.7℃);POSS的引入使PNIPAM水凝胶的玻璃化转变温度(Tg)由142℃升至148℃,并改善了其热稳定性和力学强度.