New blue electroluminescent n‐type polyfluorene copolymers with a 1,3,4‐oxadiazole unit in the main chain

Novel polyfluorene copolymers alternately having an 1,3,4‐oxadiazole unit in the main chain were prepared by both one‐step and two‐step methods for polyoxadiazole synthesis. They displayed highly efficient blue photoluminescence, the properties of which were affected by the extent of conjugation and the changes in the electron density by a side chain. An electrochemical analysis of the polymers using cyclic voltammetry suggested that they could be used as electron‐transport/hole‐blocking materials as well as blue emission materials for polymer light‐emitting diodes. A simple double‐layer device consisting of poly(N‐vinylcarbazole) as a hole‐transport layer and poly[(9,9′‐didodecylfluorene‐2,7‐diyl)‐alt‐((1,4‐bis(1,3,4‐oxadiazole)‐2,5‐di(2‐ethylhexyloxy)phenylene)‐5,5′‐diyl)] as an emission layer exhibited narrow blue electroluminescence with a maximum at 430 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1058–1068, 2004     

Synthesis and optoelectronic properties of luminescent poly(p‐phenylenevinylene) derivatives containing electron‐transporting 1,3,4‐oxadiazole groups

Three random copolymers ( P1–P3 ) comprising phenylenevinylene and electron‐transporting aromatic 1,3,4‐oxadiazole segments (11, 18, 28 mol %, respectively) were prepared by Gilch polymerization to investigate the influence of oxadiazole content on their photophysical, electrochemical, and electroluminescent properties. For comparative study, homopolymer poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐p‐phenylenevinylene] ( P0 ) was also prepared by the same process. The polymers ( P0–P3 ) are soluble in common organic solvents and thermally stable up to 410 °C under a nitrogen atmosphere. Their optical properties were investigated by absorption and photoluminescence spectroscopy. The optical results reveal that the aromatic 1,3,4‐oxadiazole chromophores in P1–P3 suppress the intermolecular interactions. The HOMO and LUMO levels of these polymers were estimated from their cyclic voltammograms. The HOMO levels of P0–P3 are very similar (?5.02 to ?5.03 eV), whereas their LUMO levels decrease readily with increasing oxadiazole content (?2.7, ?3.08, ?3.11, and ?3.19 eV, respectively). Therefore, the electron affinity of the poly(p‐phenylenevinylene) chain can be gradually enhanced by incorporating 1,3,4‐oxadiazole segments. Among the polymers, P1 (11 mol % 1,3,4‐oxadiazole) shows the best EL performance (maximal luminance: 3490 cd/m², maximal current efficiency: 0.1 cd/A). Further increase in oxadiazole content results in micro‐phase separation that leads to performance deterioration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4377–4388, 2007     

Unsaturated alkoxy‐substituted poly(p‐phenylene 1,3,4‐oxadiazole)s: Synthesis and chemical–physical characterization

A new series of alkoxy‐substituted poly(p‐phenylene 1,3,4‐oxadiazole)s modified by the insertion of small percentages of various comonomers were synthesized through the precursor polyhydrazides. The comonomers used contained trans double bonds or meta‐alkoxy‐substituted aromatic rings to improve the solubility of the final polymers. The synthesized copolymers were chemically characterized by ¹H NMR and Fourier transform infrared spectroscopy. In some cases, the copolymers really showed improved solubility in organic solvents. The ¹⁵N solid‐state NMR technique was applied to examine the degree of conversion from the precursor polyhydrazides to the final polymers, which determined the effective conjugated length in the target polyoxadiazoles. Thermal stability and structural characteristics of all the polymers as well as a preliminary investigation on the optical properties of polyoxadiazoles are also reported. The copolymers retained high absorbance in the UV region and high transmission in the whole telecommunication range. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3916–3928, 2003     

Preparation of densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline)s as novel water‐soluble conducting copolymers

Various densely grafted polymers containing poly(aniline‐2‐sulfonic acid‐co‐aniline)s as side chains and polystyrene as the backbone were prepared. A styryl‐substituted aniline macromonomer, 4‐(4‐vinylbenzoxyl)(N‐tert‐butoxycarbonyl)phenylamine (4‐VBPA‐^tBOC), was first prepared by the reaction of 4‐aminophenol with the amino‐protecting moiety di‐tert‐butoxyldicarbonate, and this was followed by substitution with 4‐vinylbenzyl chloride. 4‐VBPA‐^tBOC thus obtained was homopolymerized with azobisisobutyronitrile as an initiator, and this was followed by deprotection with trifluoroacetic acid to generate poly[4‐(4‐vinylbenzoxyl)phenylamine] (PVBPA) with pendent amine moieties. Second, the copolymerization of aniline‐2‐sulfonic acid and aniline was carried out in the presence of PVBPA to generate densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline). Through the variation of the molar feed ratio of aniline‐2‐sulfonic acid to aniline, various densely grafted copolymers were generated with different aniline‐2‐sulfonic acid/aniline composition ratios along the side chains. The copolymers prepared with molar feed ratios greater than 1/2 were water‐soluble and had conductivities comparable to those of the linear copolymers. Furthermore, these copolymers could self‐dope in water through intermolecular or intramolecular interactions between the sulfonic acid moieties and imine nitrogens, and this generated large aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1090–1099, 2005     

Synthesis and photovoltaic properties of copolymers based on benzo[1,2‐b:4,5‐b′]dithiophene and thiophene with electron‐withdrawing side chains

Six alternating conjugated copolymers ( PL1 – PL6 ) of benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thiophene, containing electron‐withdrawing oxadiazole (OXD), ester, or alkyl as side chains, were synthesized by Stille coupling reaction. The structures of the polymers were confirmed, and their thermal, optical, electrochemical, and photovoltaic properties were investigated. The introduction of conjugated electron‐withdrawing OXD or formate ester side chain benefits to decrease the bandgaps of the polymers and improve the photovoltaic performance due to the low steric hindrance of BDT. Bulk heterojunction polymer solar cells (PSCs) were fabricated based on the blend of the as‐synthesized polymers and the fullerene derivative [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 2.06% was obtained for PL5 ‐based PSC under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Investigation of spacer influences in phosphorescent‐emitting nonconjugated PLED systems

An assay was introduced to clarify influences on electroluminescent behavior for RGB‐colored phosphorescent terpolymers with N,N‐Di‐p‐tolyl‐aniline as hole‐transporting unit, 2‐(4‐biphenyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole (tert‐BuPBD) as electron‐transporting unit, and different iridium complexes in RGB‐colors as triplet emitting materials. All monomers were attached with spacer moieties to the “para” position of a polystyrene. Polymer light emitting diodes (PLEDs) were built to study the electro‐optical behavior of these materials. The gist was a remarkable influence of hexyl‐spacer units to the PLED performance. For all three colors only very restricted PLED performances were found. In comparison RGB‐terpolymers were synthesized with directly attached charge transport materials to the polymer backbone. For this directly linked systems efficiencies were 28 cd A^?1 @ 6 V (green), 4.9 cd A^?1 @ 5 V (red) and 4.3 cd A^?1 @ 6 V (bluish). In summary we assume that an improved charge percolation pathways regarding to the higher content of semiconducting molecules and an improved charge transfer to the phosphorescent dopand in the case of the copolymers without spacers are responsible for the better device performance comparing the copolymers with hexyl spacers. The approach of the directly connected charge transport materials at the nonconjugated styrene polymer backbone should be favored for further investigations, therefore. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 389–402, 2010     

Novel mesogen‐jacketed poly(p‐phenylenevinylene) derivatives bearing oxadiazole pendants: Design,synthesis, and optoelectronic properties

1,3,4‐oxadiazole moieties were laterally linked to the phenyl rings via a short ? OCH₂ spacer and a series of novel poly(p‐phenylenevinylene) derivatives have been successfully synthesized through Horner–Witting–Emmons coupling reaction. The structures and properties of the monomers and the resulting conjugated polymers were characterized by nuclear magnetic resonance spectroscope, Fourier transform infrared, elemental analysis, gel permeation chromatography, thermogravimetric analysis, UV–vis absorption (UV) spectroscopy, photoluminescence spectroscopy and cyclic voltammetry. The UV spectra at solution state was similar to what's observed at film state while the PL spectra at film state had a red shift from 19 to 28 nm compared with the results at solution state, which implied that the unique bulky jacketed structure containing oxadiazole unit of these copolymers could effectively suppress π‐stacking/aggregation. LUMO levels of these polymers varied from ?3.44 to ?3.63 eV with increasing content of oxadiazole units, which facilitated electron injection. PLEDs with the configuration of ITO/PEDOT/Polymer/TPBI (15 nm)/LiF (1 nm)/Al (100 nm) were fabricated, which emit a yellowish green light around 540 and 570 nm with a maximum brightness of 1074.7 cd/m² and luminous efficiency of 0.108 cd/A. The introduction of the unique bulky OXD unit into PPVs at a low molar content largely improved the electroluminescence properties of PPV. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7173–7186, 2008     

Synthesis and characterization of donor–bridge–acceptor alternating copolymers containing perylene diimide units and their application to photovoltaic cells

We have used Suzuki coupling to prepare a series of alternating copolymers featuring coplanar cyclopentadithiophene and hole‐transporting carbazole units. We observed quenching in the photoluminescence spectra of our polymers after incorporating pendent electron‐deficient perylene diimide ( PDI ) moieties on the side chains, indicating more efficient photoinduced electron transfer. Electrochemical measurements revealed that the PDI ‐containing copolymers displayed reasonable and sufficient offsets of the energy levels of their lowest unoccupied molecular orbitals for efficient charge dissociation. The performance of bulk heterojunction photovoltaic cells incorporating the copolymer/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester blends (1:4, w/w) was optimized when the active layer had a thickness of 70 nm. The photocurrents of the devices were enhanced as a result of the presence of the PDI moieties, thereby leading to improved power conversion efficiencies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1298–1309, 2010     

2,5‐Bis[4‐methyl‐3‐(pyridin‐3‐yl)phenyl]‐1,3,4‐oxadiazole and its one‐dimensional polymeric complex with ZnCl2

2,5‐Bis[4‐methyl‐3‐(pyridin‐3‐yl)phenyl]‐1,3,4‐oxadiazole (L), C₂₆H₂₀N₄O, forms one‐dimensional chains via two types of intermolecular π–π interactions. In catena‐poly[[dichloridozinc(II)]‐μ‐2,5‐bis[4‐methyl‐3‐(pyridin‐3‐yl)phenyl]‐1,3,4‐oxadiazole], [ZnCl₂(C₂₆H₂₀N₄O)]_n, synthesized by the combination of L with ZnCl₂, the Zn^II centres are coordinated by two Cl atoms and two N atoms from two L ligands. [ZnCl₂L]_n forms one‐dimensional P (plus) and M (minus) helical chains, where the L ligand has different directions of twist. The helical chains stack together via interchain π–π and C—H...π interactions.     

Chemical synthesis and characterization of poly(aniline‐co‐ethyl 3‐aminobenzoate) copolymers

Copolymers of aniline and ethyl 3‐aminobenzoate (3EAB) were synthesized by chemical polymerization in several mole ratios of aniline to functionalized aniline, and their physicochemical properties were compared to those of poly(aniline‐co‐3‐aminobenzoic acid) (3ABAPANI) copolymers. The copolymers were characterized with UV–vis, FTIR, Raman, SEM, EPR, and solid‐state NMR spectroscopy, elemental analysis, and conductivity measurements. The influence of the carboxylic acid and ester group ring substituents on the copolymers was investigated. The spectroscopic studies confirmed incorporation of 3ABA or 3EAB units in the copolymers and hence the presence of C?O group in the copolymer chains. The conductivity and EPR signals both decreased with increasing 3EAB content of the copolymers emeraldine salt (ES) form. The conductivity of the ES form of 3ABAPANI was found to be high (1.4 × 10^?1 S cm^?1) compared with the conductivity (10^?2–10^?3 S cm^?1) of 3EABPANI (ES) copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1339–1347, 2010     

Triarylamine N‐functionalized 3,6‐linked carbazole main chain polymers and copolymers: Preparation and physical properties

The preparation of triarylamine N‐functionalized 3,6‐linked carbazole homopolymers as well as alternating copolymers with 2,5‐diphenyl‐[1,3,4]oxadiazole and benzo[1,2,5]thiadiazole was undertaken using Suzuki cross‐coupling polymerization procedures associating 3,6‐bis(4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolan‐2‐yl)‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole and, respectively, 3,6‐dibromo‐9‐(bis[4‐(2‐butyl‐octyloxy)‐phenyl]‐amino‐phen‐4‐yl)‐carbazole, 2,5‐bis(4‐bromo‐phenyl)‐[1, 3,4]oxadiazole, and 4,7‐dibromo‐benzo[1,2,5]thiadiazole. Both the carbazole homopolymer and alternating copolymer with 2,5‐diphenyl‐[1,3,4]oxadiazole were found as wideband gap materials emitting in the blue part of the electromagnetic spectrum while the carbazole alternating copolymer with 4,7‐benzo[1,2,5]thiadiazole had a narrower band gap and emitted in the orange part of the electromagnetic spectrum. The new polymers are thermally stable up to 300 °C. A discussion of the electrochemical and optical properties of the new polymers is presented. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5957–5967, 2007.     

A novel mesogen‐jacketed liquid crystalline electroluminescent polymer with both thiophene and oxadiazole in conjugated side chain

Mesogen‐jacketed liquid crystalline polymers (MJLCPs) with both electron‐transport oxadiazole and hole‐transport thiophene in the side chain were reported for their promising electroluminescent property. Monomers of 2,5‐bis{5‐[(4‐alkoxyphenyl)‐1,3,4‐oxadiazole]thiophen‐2‐yl}styrene (M‐Cm, m is the number of the carbons in the alkoxy groups, m = 8,10) were synthesized and confirmed by ¹H‐NMR, mass spectrometry, and elemental analysis. The corresponding polymers were successfully obtained and characterized by thermal analysis, optical spectroscopy, cyclic voltammetry, electroluminescent analysis, polarized light microscopy (PLM), and wide‐angle X‐ray diffraction (WAXD). The polymers exhibited high decomposition temperatures reaching 382 °C and high T_g's reaching 184 °C. The absorption spectra indicated that both the monomers and polymers had little aggregation in film than that in solution, and the absorption spectra of the polymers showed an obvious blue‐shift compared with those of the monomers. Both the monomers and the polymers had blue‐green emission, and the photoluminescence spectra of the polymers in film suggested the formation of excimer or exciplex. The polymers showed lower HOMO energy levels and LUMO energy levels than those of the MJLCPs containing oxadiazole unit reported before. Electroluminescence study with the device configuration of ITO/PEDOT/PVK/polymer/TPBI/Ca/Ag showed maximum brightness and current efficiency of 541 cd/m² and 0.10 cd/A, which proved that the introduction of directly connected electron‐ and hole‐transport units could greatly improve the EL property of side‐chain conjugated polymers. The phase structures of the polymers were confirmed to be smectic A phase through the results of PLM and WAXD. The annealed samples emitted polarized photoluminescence at room temperature, which indicated potential utility for practical applications in display. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1502–1515, 2010     

Bio‐based comb‐like copolymers derived from alkyl 10‐undecenoates and maleic anhydride

In this article, 10‐undecenoic acid, based on castor oil, was used a raw material for the synthesis of alternating copolymers. ω‐Unsaturated fatty esters as alkyl 10‐undecenoates were prepared by the esterification reaction of 10‐undecenoic acid with alkyl alcohol. A series of comb‐like copolymers were synthesized by free radical polymerization from maleic anhydride and alkyl 10‐undecenoates copolymers with different length of alkyl side chains in a toluene solution. These copolymers were investigated by ¹H and ¹³C nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry (DSC). The copolymers were obtained in a low molecular weight in a range 3370–12,240 g mol⁻¹ and their structural characterization indicated the formation of alternating copolymers. DSC characterization revealed that these comb‐like copolymers showed amorphous to semicrystalline behavior by increasing the length of side chains. The bio‐based comb‐like copolymers allow for the development of new polymeric materials for several applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1039–1045     

Highly soluble conducting poly(ethylene oxide) grafted at two sites of poly(o‐aminobenzyl alcohol)

Poly(o‐aminobenzyl alcohol) (POABA) was grafted with poly(ethylene oxide)s (PEOs) through the reaction of tosylated PEO with both the hydroxide and amine moieties of reduced POABA. Reduced POABA was prepared through the acid‐mediated polymerization of o‐aminobenzyl alcohol, followed by neutralization with an aqueous ammonium hydroxide solution and reduction with hydrazine. The grafted copolymers were very soluble in common polar solvents, such as chloroform, tetrahydrofuran, and dimethylformamide, and the copolymers with longer PEO side chains (number‐average molecular weight > 164) were even water‐soluble. The conductivities of the doped grafted copolymers decreased with increasing PEO side‐chain length because of the nonconducting PEO and its torsional effect on the POABA backbone. The conductivity of highly water‐soluble POABA‐g‐PEO‐350 was 0.689 × 10^?3 S/cm, that is, in the semiconducting range. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4756–4764, 2004     

Vinyl copolymers containing pendant 1,4‐distyrylbenzene and 1,3,4‐oxadiazole chromophores: Preparation and optoelectronic properties

We prepared two vinyl copolymers P1 and P2 containing pendant distyrylbenzene and aromatic 1,3,4‐oxadiazole derivatives, respectively, from their precursor poly(styrene‐ran‐4‐vinylbenzyl chloride) (M_w = 11,400, PDI = 1.18), which had been prepared by the controlled radical polymerization (RAFT). Two main chain polymers containing similar isolated distyrylbenzene ( P3) and aromatic 1,3,4‐oxadiazole ( P4 ) chromophores were also synthesized for comparative study. The resulted copolymers ( P1 – P4 ) are soluble in common organic solvents and are basically amorphous materials with 5% weight‐loss temperature higher than 360 °C. The PL spectral results reveal that the architecture of P1 prevents the formation of inter‐ or intramolecular interaction. The HOMO and LUMO levels of P2 , estimated from cyclic voltammetric data, are ?5.96 and ?3.81 eV, respectively, which are much lower than those of P1 (?5.12 and ?3.11 eV). The emission of blend from P1 and P2 are contributed mainly from distyrylbenzene fluorophore (～450 nm) owing to efficient energy transfer. Moreover, the blend exhibits three kinds of redox behavior depending on their weight ratios. The luminance and current efficiency of the EL device lpar;ITO/PEDOT/ MEH ‐ PPV + P2 /Al) are 503 cd/m² and 0.11 cd/A, which can be improved to 1285 cd/m² and 0.44 cd/A, respectively, as the weight ratio of P2 increases from 0 to 20%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5362–5377, 2006     

Dendronized polystyrene via orthogonal double‐click reactions

Dendronized copolymers bearing two different dendrons as side chains have been synthesized using a modular orthogonal “double‐click” reaction based strategy. The orthogonality of the Huisgen‐type azide‐alkyne cycloaddition and the Diels–Alder reaction was utilized to attach different dendrons to the polymer backbone via the “graft‐to” strategy. First through third generations of polyaryl ether dendrons appended with an alkyne group and polyester dendrons possessing a furan‐protected maleimide group at their focal point were reacted with a styrene based copolymer containing azide and anthracene moieties as side chains. The efficiency and selectivity of the orthogonal dendronization of the copolymers were examined via various analytical methods such as ¹H NMR spectroscopy, FTIR and gel permeation chromatography. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5029–5037     

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains via metal‐free anionic polymerization “grafting from” technique

Thermoresponsive brush copolymers with poly(propylene oxide‐ran‐ethylene oxide) side chains were synthesized via a “grafting from” technique. Poly(p‐hydroxystyrene) was used as the backbone, and the brush copolymers were prepared by random copolymerization of mixtures of oxyalkylene monomers, using metal‐free anionic ring‐opening polymerization, with the phosphazene base (t‐BuP₄) being the polymerization promoter. By controlling the monomer feed ratios in the graft copolymerization, two samples with the same side‐chain length and different compositions were prepared, both of which possessed high molecular weights and low molecular weight distributions. The results from light scattering and fluorescence spectroscopy indicated that the brush copolymers in their dilute aqueous solutions were near completely solvated at low temperature and underwent slight intramolecular chain contraction/association and much more profound intermolecular aggregation at different stages of the step‐by‐step heating process. Above 50 °C, very turbid solutions, followed by macrophase separation, were observed for both of the samples, which implied that it was difficult for the brush copolymers to form stable nanoscopic aggregates at high temperature. All these observations were attributed, at least partly, to the distribution of the oxyalkylene monomers along the side chains and the overall brush‐like molecular architecture. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2320–2328, 2010     

Synthesis and properties of photoluminescent polymers bearing electron‐facilitating oxadiazole derivative side groups

Poly(p‐divinylene phenylene) derivatives bearing fluorene and carbazole units in the main chain and 5‐phenyl‐1,3,4‐oxadiazole moieties as side groups were prepared by the polycondensation of a newly synthesized monomer, [2‐(5′‐phenyl‐1′,3′,4′‐oxadiazole‐2′‐yl)‐1,4‐xylylene]bis(triphenyl phosphonium bromide) (OXAD), with 9,9‐dibutylfluorene‐2,2′‐dicarbaldehyde (DBFDA) and 9‐(2‐ethylhexyl)carbazole‐3,6‐dicarbaldehyde (EHCDA), which gave DBFDA–OXAD and EHCDA–OXAD. Analogues of these polymers without the side groups were also synthesized by the reaction of 1,4‐xylene bis(triphenyl phosphonium bromide) (PXYL) with the dicarbaldehydes, which gave DBFDA–PXYL and EHCDA–PXYL. All the synthesized polymers are soluble in organic solvents, giving films of good quality. The polymers are stable beyond 375 °C. They emit blue and blue‐green light, and their quantum yields are 38–79% in solution and 1–24% in film, depending on the fluorene and carbazole units as well as the side groups. In particular, the OXAD‐based polymers contain hole‐facilitating backbones and electron‐facilitating side groups, perhaps allowing these polymers to transport both holes and electrons. Overall, the synthesized polymers are potential candidates for the fabrication of light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1173–1183, 2002     

Synthesis and nonlinear optical properties of polyacetylenes containing oxadiazole and thiophene pendant groups with high thermal stability

A series of random copolymers poly(3‐ethynylthiophene)‐copoly(2‐(4‐decyloxyphenyl)‐5‐(4‐ethynylphenyl)‐1,3,4‐oxadiazole) with different oxadiazole content ( P2 – P4 ) and homopolymer poly(3‐ethynylthiophene) ( P1 ) as well as poly(2‐(4‐decyloxyphenyl)‐5‐(4‐ethynylphenyl)‐1,3,4‐oxadiazole) ( P5 ) were prepared. The copolymers ( P2 – P4 ) are completely soluble in common organic solvents. The structures and properties of all polymers were characterized and evaluated by FTIR, ¹H NMR, ¹³C NMR, TGA, UV, PL, GPC, and nonlinear optical (NLO) analyses. The incorporation of diaryl‐oxadiazole into polyacetylene‐containing thiophene significantly endows copolymers with higher thermal stability, which may origin from the synergetic effect of the “jacket effect” of diaryl‐oxadiazole units and the effect of retarding or eliminating a few 6π‐electrocycliaztion proceeds of oxadiazole‐containing polyacetylene due to the hindrance of thiophene units. When the copolymer ( P3 ) posses more regular alternating thiophene pendants and oxadiazole pendants arrangement along the polymer backbone, it shows good thermal stability (T_d up to 388 °C) and larger third‐order nonlinear optical susceptibility (χ(3) up to 11.0 × 10^?11 esu). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002