Ring‐opening polymerization of cyclic esters promoted by phosphido‐diphosphine pincer group 3 complexes

Phosphido‐diphosphine Group 3 metal complexes 1–4 [(o‐C₆H₄PR₂)₂P‐M(CH₂SiMe₃)₂; R = Ph, 1 : M = Y, 2 : M = Sc; R = iPr, 3 : M = Y, 4 : M = Sc] are very efficient catalysts for the ring‐opening polymerization (ROP) of cyclic esters such as ε‐caprolactone (ε‐CL), L ‐lactide, and δ‐valerolactone under mild polymerization conditions. In the ROP of ε‐CL, complexes 1–4 promote quantitative conversion of high amount of monomer (up to 3000 equiv) with very high turnover frequencies (TOF) (～4 × 10⁴ mol_CL/mol_I h) showing a catalytic activity among the highest reported in the literature. The immortal and living ROP of ε‐CL and L ‐lactide is feasible by combining complexes 1–4 with 5 equiv of 2‐propanol. Polymers with controlled molecular parameters (M_n, end groups) and low polydispersities (M_w/M_n = 1.05–1.09) are formed as a result of fast alkoxide/alcohol exchange. In the ROP of δ‐valerolactone, complexes 1–4 showed the same activity observed for lactide (L ‐ and D ,L ‐lactide) producing high molecular weight polymers with narrow distribution of molar masses. Complexes 1–4 also promote the ROP of rac‐β butyrolactone affording atactic low molecular weight poly(hydroxybutyrate) bearing unsaturated end groups probably generated by elimination reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Structural Characterization of Lanthanide Amides Stabilized by an N-Aryloxo Functionalized β-Ketoiminate Ligand

The synthesis and characterization of dimeric lanthanide amides stabilized by a dianionic N‐aryloxo functionalized β‐ketoiminate ligand are described in this paper. Reactions of 4‐(2‐hydroxy‐5‐tert‐butyl‐phenyl)imino‐2‐pentanone (LH₂) with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF gave the dimeric lanthanide amido complexes [LLn{N(SiMe₃)₂}(THF)]₂ [Ln=Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] in good isolated yields. These complexes were characterized by IR spectroscopy, elemental analysis, and ¹H NMR spectroscopy in the case of complex 4 . The definitive molecular structures of complexes 1 , 3 , and 4 were determined. It was found that complexes 1 to 4 can initiate the ring‐opening polymerization of L‐lactide.     

Isoprene polymerization with indolide‐imine supported rare‐earth metal alkyl and amidinate complexes

Reaction of 7‐{(N‐2,6‐R)iminomethyl)}indole ( HL¹ , R = dimethylphenyl; HL² , R = diisopropylphenyl) and rare‐earth metal tris(alkyl)s, Ln(CH₂SiMe₃)₃(THF)₂, generated new rare‐earth metal bis(alkyl) complexes LLn(CH₂SiMe₃)₂(THF) [L = L¹: Ln = Lu ( 1a ), Sc ( 1b ); L = L²: Ln = Lu ( 3a ), Sc ( 3b )] and mono(alkyl) complexes L²₂Lu(CH₂SiMe₃) ( 4a ). Treatment of alkyl complexes 1a and 4a with N,N′‐diisopropylcarbodiimide afforded the corresponding amidinates L¹Lu{iPr₂NC(CH₂SiMe₃)NiPr₂}₂ ( 2a ) and L²₂Lu{iPr₂NC(CH₂SiMe₃)NiPr₂} ( 5a ), respectively. These new rare‐earth metal alkyls and amidinates except 4a in combination with aluminum alkyls and borate generated efficient homogeneous catalysts for the polymerization of isoprene, providing high cis‐1,4 selectivity and high molar mass polyisoprene with narrow molar mass distribution (M_n = 2.65 × 10⁵, M_w/M_n = 1.07, cis‐1,4 98.2%, −60 °C). The environmental hindrance around central metals arising from the bulkiness of the ligands, the Lewis‐acidity of rare‐earth metal ions, the types of aluminum tris(alkyl)s and borate, and polymerization temperature influenced significantly on both the catalytic activity and the regioselectivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5251–5262, 2008     

Half-sandwich dibenzyl complexes of scandium: Synthesis, structure, and styrene polymerization activity

Half-sandwich dibenzyl complexes of scandium have been prepared by stepwise treatment of scandium trichloride with lithium derivatives of silyl-functionalized tetramethylcyclopentadienes (C₅Me₄H)SiMe₂R (R = Me, Ph) and benzyl magnesium chloride. The resulting complexes [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)₂(THF)] and [Sc(η⁵-C₅Me₄SiMe₂Ph)(CH₂Ph)₂(1,4-dioxane)] show structure related to that of the corresponding bis(trimethylsilylmethyl) compounds [Sc(η⁵-C₅Me₄SiMe₂R)(CH₂SiMe₃)₂(THF)]. The four-coordinate complexes display η¹-coordinated benzyl ligands without significant interaction of the ipso-carbon of the phenyl moiety. Conversion of [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)₂(THF)] into the cationic species by treatment with triphenylborane in THF led to the formation of a stable charge separated complex [Sc(η⁵-C₅Me₄SiMe₃)(CH₂Ph)(THF)_x][BPh₃(CH₂Ph)]. Benzyl cation formed using [Ph₃C][B(C₆F₅)₄] in toluene resulted in a moderately active syndiospecific styrene polymerization catalyst.     

Synthesis and characterization of aluminum(III) and tin(II) complexes supported by diiminophosphinate ligands and their application in ring‐opening polymerization catalysis of ε‐caprolactone

A series of Al(III) and Sn(II) diiminophosphinate complexes have been synthesized. Reaction of Ph(ArCH₂)P(?NBu^t)NHBu^t (Ar = Ph, 3 ; Ar = 8‐quinolyl, 4 ) with AlR₃ (R = Me, Et) gave aluminum complexes [R₂Al{(NBu^t)₂P(Ph)(CH₂Ar)}] (R = Me, Ar = Ph, 5 ; R = Me, Ar = 8‐quinolyl, 6 ; R = Et, Ar = Ph, 7 ; R = Et, Ar = quinolyl, 8 ). Lithiated 3 and 4 were treated with SnCl₂ to afford tin(II) complexes [ClSn{(NBu^t)₂P(Ph)(CH₂Ar)}] (Ar = Ph, 9 ; Ar = 8‐quinolyl, 10 ). Complex 9 was converted to [(Me₃Si)₂NSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 11 ) by treatment with LiN(SiMe₃)₂. Complex 11 was also obtained by reaction of 3 with [Sn{N(SiMe₃)₂}₂]. Complex 9 reacted with [LiOC₆H₄Bu^t‐4] to yield [4‐Bu^tC₆H₄OSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 12 ). Compounds 3–12 were characterized by NMR spectroscopy and elemental analysis. The structures of complexes 6 , 10 , and 11 were further characterized by single crystal X‐ray diffraction techniques. The catalytic activity of complexes 5–8 , 11 , and 12 toward the ring‐opening polymerization of ε‐caprolactone (CL) was studied. In the presence of BzOH, the complexes catalyzed the ring‐opening polymerization of ε‐CL in the activity order of 5 > 7 ≈ 8 > 6 ? 11 > 12 , giving polymers with narrow molecular weight distributions. The kinetic studies showed a first‐order dependency on the monomer concentration in each case. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4621–4631, 2006     

Synthesis and characterizations of bis(phenoxy)‐amine tin(II) complexes for ring‐opening polymerization of lactide

A series of tin(II) complexes supported by N₂O₂ bis(phenol)‐amine ligands were prepared from the reactions of the corresponding ligands with Sn[N(SiMe₃)₂]₂ in benzene at room temperature. The ligands were designed to have different substituted group at the ortho‐position on the aryl rings (R = ^tBu, CH₃) and N‐containing side arm (E = ? CH₂NEt₂ and pyridine) giving a variation of tin(II) complexes (R = ^tBu, E = CH₂NEt₂, 2a ; R = ^tBu, E = py, 2b ; R = CH₃, E = CH₂NEt₂, 2c ; R = CH₃, E = py, 2d ). All complexes were characterized by NMR spectroscopy and single‐crystal X‐ray analysis. The single‐crystal X‐ray crystallography revealed that all complexes have a monomeric four‐coordinate tin center with a distorted seesaw structure. All complexes are active for solvent‐free polymerization of l ‐lactide at 120 °C giving poly(l ‐lactide) with narrow to moderate dispersity (Ð = 1.12–1.56). In the presence of benzyl alcohol during the polymerization, the resulting polymer was found to be linear having benzyl alcohol as the end group while, in the absence of benzyl alcohol, the polymer was cyclic. The large ^tBu group at the ortho‐position was found to decrease polymerization activity while the more basic ? CH₂NEt₂ group was found to increase the polymerization activity. The polymerization of rac‐lactide under a similar condition gave PLA having a slight heterotactic bias for all catalysts. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2104–2112     

Ring‐opening polymerization of cyclic esters by pincer complexes derived from alkaline earth metals

We report the synthesis and characterization of new Ca(II) and Mg(II) complexes of the type [Ph―PPP]MR (M = Ca, R = N(SiMe₃)₂ ( 1 ); M = Mg, R = ⁿBu ( 2 )) where Ph―PPP^? is a tridentate monoanionic ligand (Ph―PPP―H = bis(2‐diphenylphosphinophenyl)phosphine). Reaction of the opportune metal precursor (Ca[N(SiMe₃)₂]₂.THF₂ or MgⁿBu₂) with 1 equiv. of the pro‐ligand Ph―PPP_―H produces the corresponding calcium amido ( 1 ) or magnesium butyl ( 2 ) complex in high yield. Solution NMR studies show monomeric and kinetically stable structures for both species. The obtained complexes efficiently mediate the ring‐opening polymerization of ?‐caprolactone showing a turnover frequency of 40 000 h^?1. In the presence of a hexogen alcohol, up to 2000 equiv. of monomer are converted by using a low loading of catalyst (5 µmol). Kinetic studies show a first‐order reaction in monomer concentration. Copyright © 2014 John Wiley & Sons, Ltd.     

Chemistry of platinum hydrides : XXV. Preparation and characterization of platinum(II) hydridotin complexes containing bulky phosphines

Platinum(II) hydridotin complexes containing bulky phosphine ligands, trans-Pt(H)L₂(SnR₃) have been prepared from: (i) the equimolar reaction between corresponding platinum(II) dihydride complexes and HSnR₃ (Cy = cyclohexyl), P-i-Pr₃, P-t-BuPh₂, P-t-Bu₂Me; R = Ph), (ii) the oxidative addition of the corresponding zerovalent complexes, Pt⁰L₂, with HSnR₃ (L = P-i-Pr₃, P-t-BuPh₂; R = Ph), (iii) the reaction of the corresponding platinum(II) dihydride complexes with ClSnR₃ in the presence of pyridine in benzene (L = P-i-Pr₃, P-t-BuPh₂; R = CH₃, n-Bu), (iv) the sodium borohydride reduction of the corresponding hydridochloride complexes Pt(H)Cl(PR₃)₂ with ClSnR₃ in THF (L = PCy₃; R = Ph), these compounds have been characterized by their elemental analysis, infrared, ¹H and ³¹P NMR spectral data.     

Rare‐Earth Metal Alkyl Complexes with 3‐Arylamido‐Functionalized Indolyl Ligands: Synthesis,Characterization and Reactivity†

A series of dinuclear rare‐earth metal alkyl complexes {[μ‐η²:η¹:η¹‐3‐( L NCH)(CH₂SiMe₃)Ind]RE(CH₂SiMe₃)(THF)}₂ ( L ¹ = 2‐^tBuC₆H₄, RE = Y, Gd, Dy, Er, Yb; L ² = 2,4,6‐Me₃C₆H₂, RE = Dy, Er; Ind = indolyl) and {[μ‐η²:η¹:η¹‐3‐( L NCH₂)Ind]RE(CH₂SiMe₃)(THF)}₂ ( L ¹, RE = Y, Dy, Er, Yb; L ², RE = Er, Yb) bearing 3‐arylamido functionalized indolyl ligands having diverse bonding modes with metal ions were synthesized either by the insertion reaction of the imino group to the RE—C bond or by the alkane elimination reaction. In the preparation of above complexes, rare‐earth metal alkyl complexes [μ‐η⁵:η¹:η¹‐3‐( L ²NCH)(CH₂SiMe₃)Ind]Gd(CH₂SiMe₃)(THF)}₂ with a μ‐η⁵:η¹:η¹ coordination mode to the gadolinium ion and {[μ‐η³:η¹:η¹‐3‐( L ²NCH₂)Ind]Dy(CH₂SiMe₃)(THF)}₂ with a μ‐η³:η¹:η¹ coordination mode to the dysprosium ion were unexpectedly isolated. The reactions of 3‐( L ²N=CH)Ind with Er(CH₂SiMe₃)₃(THF)₂ at room temperature, generated a tetranuclear imino‐indolyl erbium intermediate {[μ‐η¹:η¹‐3‐( L ²N=CH)Ind]Er(CH₂SiMe₃)₂(THF)}₄, which can transform into the amido functionalized indolyl erbium complex in hot toluene. Moreover, the reactivities of the newly synthesized ytterbium complex with N‐heterocyclic compounds were investigated, affording the corresponding products of the mixed pyridyl‐indolyl, imidazolyl‐indolyl, and ortho‐metalated complexes. The yttrium complexes showed a high regioselectivity and steroselectivity for the isoprene polymerization with 1,4‐trans selectivity up to 91.7% and 1,4‐cis selectivity up to 96.1% in the presence of cocatalysts, respectively.     

Catalytic diversity of diene complexes of niobium and tantalum on polymerizations of ethylene,norbornene, and methyl methacrylate

Half‐metallocene diene complexes of niobium and tantalum catalyzed three‐types of polymerization: (1) the living polymerization of ethylene by niobium and tantalum complexes, MCl₂(η⁴‐1,3‐diene)(η⁵‐C₅R₅) ( 1‐4 ; M = Nb, Ta; R = H, Me) combined with an excess of methylaluminoxane; (2) the stereoselective ring opening metathesis polymerization of norbornene by bis(benzyl) tantalum complexes, Ta(CH₂Ph)₂(η⁴‐1,3‐butadiene)(η⁵‐C₅R₅) ( 11 : R = Me; 12 : R = H) and Ta(CH₂Ph)₂(η⁴‐o‐xylylene)(η⁵‐C₅Me₅) ( 16 ); and (3) the polymerization of methyl methacrylate by butadiene‐diazabutadiene complexes of tantalum, Ta(η²‐RN=CHCH=NR)(η⁴‐1,3‐butadiene)(η⁵‐C₅Me₅) ( 25 : R = p‐methoxyphenyl; 26 : R = cyclohexyl) in the presence of an aluminum compound ( 24 ) as an activator of the monomer.     

Silicon containing ferrocenyl phosphane ligands

New ferrocenyl phosphane ligands incorporating Si-P linkages, [(η-C₅H₄SiMe₂PR₂)₂Fe], where R=Ph and Me, and the corresponding metal complexes [Mo(CO)₄(L)] have been prepared and characterised. The molecular structures of [(η-C₅H₄SiMe₂PR₂)₂Fe], where R=Ph and Me have been determined by single crystal X-ray diffraction.     

Titanium and zirconium complexes with aminoiminophosphorane ligands

A series of titanium and zirconium complexes based on aminoiminophosphorane ligands [Ph₂P(Nt‐Bu)(NR)]₂MCl₂ ( 4 , M = Ti, R = Ph; 5 , M = Zr, R = Ph; 6 , M = Ti, R = SiMe₃; 7 , M = Zr, R = SiMe₃) have been synthesized by the reaction of the ligands with TiCl₄ and ZrCl₄. The structure of complex 4 has been determined by X‐ray crystallography. The observed very weak interaction between Ti and P suggests partial π‐electron delocalization through both Ti and P. The complexes 4–7 are inactive for ethylene polymerization in the presence of modified methylaluminoxane (MMAO) or i‐Bu₃Al–Ph₃CB(C₆F₅)₄ under atmospheric pressure, and is probably the result of low monomer ethylene concentration and steric congestion around the central metal. Copyright © 2005 John Wiley & Sons, Ltd.     

Yttrium bis(alkyl) and bis(amido) complexes bearing N,O multidentate ligands. Synthesis and catalytic activity towards ring‐opening polymerization of L‐lactide

Methoxy‐modified β‐diimines HL ¹ and HL ² reacted with Y(CH₂SiMe₃)₃(THF)₂ to afford the corresponding bis(alkyl)s [L¹Y(CH₂SiMe₃)₂] ( 1 ) and [L²Y(CH₂SiMe₃)₂] ( 2 ), respectively. Amination of 1 with 2,6‐diisopropyl aniline gave the bis(amido) counterpart [L¹Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 3 ), selectively. Treatment of Y(CH₂SiMe₃)₃(THF)₂ with methoxy‐modified anilido imine HL ³ yielded bis(alkyl) complex [L³Y(CH₂SiMe₃)₂(THF)] ( 4 ) that sequentially reacted with 2,6‐diisopropyl aniline to give the bis(amido) analogue [L³Y{N(H)(2,6‐iPr₂? C₆H₃)}₂] ( 5 ). Complex 2 was “base‐free” monomer, in which the tetradentate β‐diiminato ligand was meridional with the two alkyl species locating above and below it, generating tetragonal bipyramidal core about the metal center. Complex 3 was asymmetric monomer containing trigonal bipyramidal core with trans‐arrangement of the amido ligands. In contrast, the two cis‐located alkyl species in complex 4 were endo and exo towards the O,N,N tridentate anilido‐imido moiety. The bis(amido) complex 5 was confirmed to be structural analogue to 4 albeit without THF coordination. All these yttrium complexes are highly active initiators for the ring‐opening polymerization of L ‐LA at room temperature. The catalytic activity of the complexes and their “single‐site” or “double‐site” behavior depend on the ligand framework and the geometry of the alkyl (amido) species in the corresponding complexes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5662–5672, 2007     

Bimetallic Rare Earth Alkyl Complexes Bearing Bridged Amidinate Ligands: Synthesis and Activity for L-Lactide Polymerization

Four novel bridged‐amidines H₂L {1,4‐R¹[C(=NR²)(NHR²)]₂ [R¹=C₆H₄, R²=2,6‐ⁱPr₂C₆H₃ (H₂L¹); R¹=C₆H₄, R²=2,6‐Me₂C₆H₃ (H₂L²); R¹=C₆H₁₀, R²=2,6‐ⁱPr₂C₆H₃ (H₂L³); R¹=C₆H₁₀, R²=2,6‐Me₂C₆H₃ (H₂L⁴)]} were synthesized in 65%–78% isolated yields by the condensation reaction of dicarboxylic acid with four equimolar amounts of amines in the presence of PPSE at 180°C. Alkane elimination reaction of Ln(CH₂SiMe₃)₃(THF)₂ (Ln=Y, Lu) with 0.5 equiv. of amidine in THF at room temperature afforded the corresponding bimetallic rare earth alkyl complexes (THF)(Me₃SiCH₂)₂LnL¹Ln(CH₂SiMe₃)₂(THF) [Ln=Y ( 1 ), Lu ( 2 )], (THF)(Me₃SiCH₂)₂LnL²Ln‐ (CH₂SiMe₃)₂(THF) [Ln=Y ( 3 ), Lu ( 4 )], (THF)(Me₃SiCH₂)₂YL³Y(CH₂SiMe₃)₂(THF) ( 5 ), (THF)(Me₃SiCH₂)₂YL⁴‐ Y(CH₂SiMe₃)₂(THF) ( 6 ) in 72% –80% isolated yields. These neutral complexes showed activity towards L‐lactide polymerization in toluene at 70°C to give high molecular weight (M>10⁴) and narrow molecular weight distribution (M_w/M_n≦1.40) polymers     

Synthesis of ferrocene‐containing N‐aryloxo β‐ketoiminate lanthanide complexes and polymerization of ε‐caprolactone

The synthesis, characterization and ε‐caprolactone polymerization behavior of lanthanide amido complexes stabilized by ferrocene‐containing N‐aryloxo functionalized β‐ketoiminate ligand FcCOCH₂C(Me)N(2‐HO‐5‐Bu^t‐C₆H₃) (LH₂, Fc = ferrocenyl) are described. The lanthanide amido complexes [LLnN(SiMe₃)₂(THF)]₂ [Ln = Nd ( 1 ), Sm ( 2 ), Yb ( 3 ), Y ( 4 )] were synthesized in good yields by the amine elimination reactions of LH₂ with Ln[N(SiMe₃)₂]₃(µ‐Cl)Li(THF)₃ in a 1:1 molar ratio in THF. These complexes were characterized by IR spectroscopy and elemental analysis, and ¹H NMR spectroscopy was added for the analysis of complex 4 . The definitive molecular structures of complexes 1 and 3 were determined by X‐ray diffraction studies. Complexes 1 – 4 can initiate the ring‐opening polymerization of ε‐caprolactone with moderate activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Chiral Salan Aluminium Ethyl Complexes and Their Application in Lactide Polymerization

Synthetic routes to aluminium ethyl complexes supported by chiral tetradentate phenoxyamine (salan‐type) ligands [Al(OC₆H₂(R‐6‐R‐4)CH₂)₂{CH₃N(C₆H₁₀)NCH₃}‐C₂H₅] ( 4 , 7 : R=H; 5 , 8 : R=Cl; 6 , 9 : R=CH₃) are reported. Enantiomerically pure salan ligands 1–3 with (R,R) configurations at their cyclohexane rings afforded the complexes 4 , 5 , and 6 as mixtures of two diastereoisomers ( a and b ). Each diastereoisomer a was, as determined by X‐ray analysis, monomeric with a five‐coordinated aluminium central core in the solid state, adopting a cis‐(O,O) and cis‐(Me,Me) ligand geometry. From the results of variable‐temperature (VT) ¹H NMR in the temperature range of 220–335 K, ¹H–¹H NOESY at 220 K, and diffusion‐ordered spectroscopy (DOSY), it is concluded that each diastereoisomer b is also monomeric with a five‐coordinated aluminium central core. The geometry is intermediate between square pyramidal with a cis‐(O,O), trans‐(Me,Me) ligand disposition and trigonal bipyramidal with a trans‐(O,O) and trans‐(Me,Me) disposition. A slow exchange between these two geometries at 220 K was indicated by ¹H–¹H NOESY NMR. In the presence of propan‐2‐ol as an initiator, enantiomerically pure (R,R) complexes 4 – 6 and their racemic mixtures 7 – 9 were efficient catalysts in the ring‐opening polymerization of lactide (LA). Polylactide materials ranging from isotactically biased (P_m up to 0.66) to medium heterotactic (P_r up to 0.73) were obtained from rac‐lactide, and syndiotactically biased polylactide (P_r up to 0.70) from meso‐lactide. Kinetic studies revealed that the polymerization of (S,S)‐LA in the presence of 4 /propan‐2‐ol had a much higher polymerization rate than (R,R)‐LA polymerization (k_SS/k_RR=10.1).     

Regioselektive Ringöffnungen von einfach ungesättigten triangularen Clusterkomplexen [M2Rh(μ‐PR2)(μ‐CO)2(CO)8] (M2 = Re2, Mn2; R = Cy,Ph; M2 = MnRe,R = Ph) mit Diphosphanen

Regioselective Ring Opening Reactions of Unifold Unsaturated Triangular Cluster Complexes [M₂Rh(μ‐PR₂)(μ‐CO)₂(CO)₈] (M₂ = Re₂, Mn₂; R = Cy, Ph; M₂ = MnRe, R = Ph) with Diphosphanes Equimolar amounts of the triangular title compounds and chelates of the type (Ph₂P)₂Z (Z = CH₂, DPPM ; C=CH₂, EPP ) react in thf solution at –40 to –20 °C under release of the labile terminal carbonyl ligand attached to the rhodium atom in good yields (70–90%) to ring‐opened unifold unsaturated complexes [MRh(μ‐PR₂)(CO)₄M(DPPM bzw. EPP)(μ‐CO)₂(CO)₃] (DPPM: M₂ = Re₂, R = Cy 1 , Ph 2 ; Mn₂, Cy 5 , Ph 6 ; MnRe, Cy 7 . EPP: M₂ = Re₂, R = Cy 8 ; Mn₂, Cy 10 ). Complexes 1 , 2 and 8 react subsequently under minor uptake of carbon monoxide and formation of the valence saturated complexes [ReRh(μ‐PR₂)(CO)₄M(DPPM bzw. EPP) (CO)₆] (DPPM: R = Cy 3 , Ph 4 . EPP: R = Cy 9 ). Separate experiments ascertained that the regioselective ring opening at the M–M‐edge of the title compounds is limited to reactions with diphosphanes chelates with only one chain member and that the preparation of the unsaturated complexes demands relatively good donor ability of both P atoms. As examples for both types of compounds the molecular structures of 8 and 3 have been determined from single crystal X‐ray structure analysis. Additionally all new compounds are identified by means of ν(CO)IR, ¹H‐ and ³¹P‐NMR data. This includes complexes with a modified chain member in 1 and 5 which, after deprotonation reaction to carbanionic intermediates, could be trapped with [PPh₃Au]⁺ cations as rac‐[MRh(μ‐PR₂)(CO)₄M((Ph₂P)₂CHAuPPh₃)(μ‐CO)₂(CO)₃] (M₂ = Re 17 , Mn 18 ) and products rac‐[MRh(μ‐PR₂)(CO)₄M((Ph₂P)₂CHCH₂R)(μ‐CO)₂(CO)₃] (M₂ = Re, R = Ph 19 , n‐Bu 21 , Me 23 ; Mn, Ph 20 , n‐Bu 22 , Me 24 ) which result from Michael‐type addition reactions of 8 or 10 with strong nucleophiles LiR.     

Metal Complexes with Biologically Important Ligands. CLXVI Tetracarbonyl Complexes of Chromium(0) and Molybdenum(0) with Schiff Bases from Pyridine‐2‐carboxaldehyde and α‐Amino Acid Esters as N,N‐Chelate Ligands

The complexes [M(CO)₄(pyridyl‐CH=N‐CHRCO₂R′)] (M = Cr, Mo; R = H, CH₃, CH(CH₃)₂, CH₂CH(CH₃)₂) were obtained by reaction of the Schiff bases from pyridine‐2‐carboxaldehyde and glycine, L‐alanine, L‐valine or L‐leucine esters with the norbornadiene complexes [M(CO)₄(nbd)] and were characterized by IR, ¹H and ¹³C NMR and UV‐vis spectra. The deeply colored complexes exhibit solvatochromism.     

Synthesis and Structural Characterization of Alkali Metal Guanidinates

Reactions of 1,3-diisopropylcarbodiimide with alkali metal amides, MN（SiMe3）2 （M=Li or Na） in hexane or THF produced the alkali metal guanidinates { （i-PrN）2C [N（SiMe3）2]Li }2 （1） and { （i-PrN）2C[N（SiMe3）2]Na（THF） } 2 （2） in nearly quantitative yields. Both complexes 1 and 2 were well characterized by elemental analysis, IR spectra, ^1H and ^13C NMR spectra, and X-ray diffraction. It was found that the guanidinates adopt different coordination modes in these complexes.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.